What is the maximum allowable temperature that should be used on heat-shrinkable tubing?

What is the maximum allowable temperature that should be  used on heat-shrinkable tubing?
by

1 Answer

Answer :

300º F
by

Related questions

What is the maximum allowable source pressure that can be used with the compressor air/nitrogen heating tool?

Description : What is the maximum allowable source pressure that can be used with the compressor air/nitrogen heating tool?

Last Answer : 200 psig.

Motor name plate data includes '°°C rise'. This indicates the _____________. A. actual running temperature of the winding from no load to full load B. permissible temperature rise of the windings above the designed ambient temperature C. maximum allowable temperature rise above normal full load operating temperature D. maximum allowable temperature rise for continuous no load service

Description : Motor name plate data includes '°°C rise'. This indicates the _____________. A. actual running temperature of the winding from no load to full load B. permissible temperature rise ... above normal full load operating temperature D. maximum allowable temperature rise for continuous no load service

Last Answer : Answer: B

Which of the following temperatures represents the maximum allowable temperature for the electrolyte of a lead-acid battery? A. 100°F B. 125°F C. 145°F D. 212°F

Description : Which of the following temperatures represents the maximum allowable temperature for the electrolyte of a lead-acid battery? A. 100°F B. 125°F C. 145°F D. 212°F

Last Answer : Answer: B

An insulation resistance test is performed on a particular piece of electric equipment. In addition to the resistance reading, what information listed below should be entered in the electrical log? A. The maximum allowable operating temperature of the machine. B. The temperature of the machine at the time the resistance reading was taken. C. The normal temperature rise of the machine. D. The complete nameplate data from the resistance test instrument used to obtain the reading.

Description : An insulation resistance test is performed on a particular piece of electric equipment. In addition to the resistance reading, what information listed below should be entered in the electrical log? A. ... D. The complete nameplate data from the resistance test instrument used to obtain the reading.

Last Answer : Answer: B

If an insulating material is operated beyond the maximum allowable temperature, its life is (a) drastically increased (b) drastically reduced (c) unaffected (d) none of the above

Description : If an insulating material is operated beyond the maximum allowable temperature, its life is (a) drastically increased (b) drastically reduced (c) unaffected (d) none of the above

Last Answer : (b) drastically reduced

Could a piece of tubing be twisted into a Möbius strip?

Description : Could a piece of tubing be twisted into a Möbius strip?

Last Answer : No, because the Möbius strip is 2-D. The Möbius strip is produced by giving a half twist to a plane, the strip, and connecting the ends of the plane. The strip inside the twisted tube would be 2-D, but the tube remains 3-D.

What's the best way to make a barb fitting that's a bit small for the tubing give a water-tight fit? [See details].

Description : What's the best way to make a barb fitting that's a bit small for the tubing give a water-tight fit? [See details].

Last Answer : answer:I'm thinking teflon plumber's tape might do the job. Would that work? It seems like it would give you a nice seal, if understand what you are trying to do. I'm not good at math at all, really, ... is. I did that calculation on google; not by myself. That's the only way I could do the math.

What is the best method for bending aluminum square tubing while keeping a tight radius and minimum distortion?

Description : What is the best method for bending aluminum square tubing while keeping a tight radius and minimum distortion?

Last Answer : Buy a pipe bender from a hardware store. Then fill the pipe with water and freeze it, this will stop it form compressing.

where can I buy hydraulic steel tubing per ams5520 or AMS 5520. Or per the new updated spec?

Description : where can I buy hydraulic steel tubing per ams5520 or AMS 5520. Or per the new updated spec?

Last Answer : Need Answer

In a lab what would i use to measure a 10 cm length of dialysis tubing?

Description : In a lab what would i use to measure a 10 cm length of dialysis tubing?

Last Answer : A meter ruler or a tape measure

Why we never disconnect the tubing from the gas cock without first turning the gas off?

Description : Why we never disconnect the tubing from the gas cock without first turning the gas off?

Last Answer : If the gas is not turned off first, on removing the tubing, gas will escape - very dangerous.

Why we never disconnect the tubing from the gas cock without first turning the gas off?

Description : Why we never disconnect the tubing from the gas cock without first turning the gas off?

Last Answer : If the gas is not turned off first, on removing the tubing, gas will escape - very dangerous.

How is gas introduced into the glass tubing used in neon signs?

Description : How is gas introduced into the glass tubing used in neon signs?

Last Answer : Neon tubes are capped off by two glass electrodes that have wirepassing from outside to inside. One of these electrodes hastubulation - a small tube which remains as a passage from outsideto inside. Tubulations are ... is then heated and as it is pulled it suchinward to make the tube's own seal.

What is the best tool for cutting copper tubing?

Description : What is the best tool for cutting copper tubing?

Last Answer : Copper tubing is best cut with a straight saw, ideally diamond tipped for the cleanest cut.

Aluminum Tubing ?

Description : Aluminum Tubing ?

Last Answer : form_title= Aluminum Tubing form_header= Make DIY projects a snap with aluminum tubing How much aluminum tubing do you need?*= _ [50] How are using the aluminum tubing? *= _ [50] Do you want to buy the tubing online?*= () Yes () No

Copper Tubing?

Description : Copper Tubing?

Last Answer : form_title= Copper Tubing form_header= Have the supplies you need for all of your home improvement tasks. How much tubing do you need?*= _ [50] Will the tubing be used for liquids?*= () Yes () No Please describe the project in detail.*= _ [50]

How to Cut Stainless Steel Tubing?

Description : How to Cut Stainless Steel Tubing?

Last Answer : If you are doing a building project at home or elsewhere, chances are at some point you're going to have to use stainless steel tubing. Stainless steel tubing is a very resilient material to use for projects ... curved blades over the part of the tube you want to cut. Use a pencil to mark this spot

How to Determine the Most Suitable Tubing Material?

Description : How to Determine the Most Suitable Tubing Material?

Last Answer : The tubing material for any application depends on the nature application. Suppose if the tube is exposed to different types of conditions the SS tube would be applicable and same would be for bearing much pressure. There are several tubing material in market each with its own ability.

What is the maximum allowable conductor fill of any trade size conduit use as a raceway?

Description : What is the maximum allowable conductor fill of any trade size conduit use as a raceway?

Last Answer : It depends on the wiring, the current load in the wiring , and the distance. The NEC Code book has the charts for this.And the size of the conduit.

What is the maximum allowable primary current of a 2 KVA step-down transformer with a four to one turns ratio if connected across a 440 volt line? A. 1.1 amps B. 4.5 amps C. 18.1 amps D. 27.7 amps

Description : What is the maximum allowable primary current of a 2 KVA step-down transformer with a four to one turns ratio if connected across a 440 volt line? A. 1.1 amps B. 4.5 amps C. 18.1 amps D. 27.7 amps

Last Answer : Answer: B

According to the ASME code, maximum allowable shear stress is taken as X% of yield strength or Y% of ultimate strength. a) X=30 Y=18 b) X=30 Y=30 c) X=18 Y=18 d) X=18 Y=30

Description : According to the ASME code, maximum allowable shear stress is taken as X% of yield strength or Y% of ultimate strength. a) X=30 Y=18 b) X=30 Y=30 c) X=18 Y=18 d) X=18 Y=30

Last Answer : a) X=30 Y=18

According to the ASME code, maximum allowable shear stress is taken as X% of yield strength or Y% of ultimate strength. a) X=30 Y=18 b) X=30 Y=30 c) X=18 Y=18 d) X=18 Y=30

Description : According to the ASME code, maximum allowable shear stress is taken as X% of yield strength or Y% of ultimate strength. a) X=30 Y=18 b) X=30 Y=30 c) X=18 Y=18 d) X=18 Y=30

Last Answer : a) X=30 Y=18

Under maximum shear stress theory, maximum shear stress is equal to (a) Allowable stress in tension (b) Allowable stress in compression (c) Allowable stress in shear (d) None

Description : Under maximum shear stress theory, maximum shear stress is equal to (a) Allowable stress in tension (b) Allowable stress in compression (c) Allowable stress in shear (d) None

Last Answer : (c) Allowable stress in shear

Under maximum principal stress theory, maximum principal stress is equal to (a) Allowable stress in tension (b) Allowable stress in compression (c) Allowable stress in shear (d) None

Description : Under maximum principal stress theory, maximum principal stress is equal to (a) Allowable stress in tension (b) Allowable stress in compression (c) Allowable stress in shear (d) None

Last Answer : (a) Allowable stress in tension

Threshold Limit Value (TLV) is the maximum allowable concentration (i.e. safe limit) of pollutants in air. Safe limit for SO2 in air is __________ ppm. (A) 5 (B) 500 (C) 1000 (D) 2000

Description : Threshold Limit Value (TLV) is the maximum allowable concentration (i.e. safe limit) of pollutants in air. Safe limit for SO2 in air is __________ ppm. (A) 5 (B) 500 (C) 1000 (D) 2000

Last Answer : (A) 5

Maximum allowable concentration of CO2 in air for safe working is __________ ppm (parts per million). (A) 50 (B) 1000 (C) 2000 (D) 5000

Description : Maximum allowable concentration of CO2 in air for safe working is __________ ppm (parts per million). (A) 50 (B) 1000 (C) 2000 (D) 5000

Last Answer : (D) 5000

Maximum allowable noise exposure limits for a man working for 8 hours a day in a noisy chemical plant is about __________ decibels. (A) 20 (B) 60 (C) 90 (D) 120

Description : Maximum allowable noise exposure limits for a man working for 8 hours a day in a noisy chemical plant is about __________ decibels. (A) 20 (B) 60 (C) 90 (D) 120

Last Answer : (C) 90

Which of the following causes death by asphyxiation, if its presence inatmospheric air exceeds maximum allowable concentration (i.e. > 50 ppm)?(A) Benzopyrene(B) Peroxyacetyl nitrate(C) Carbon monoxide(D) Sulphur dioxide

Description : Which of the following causes death by asphyxiation, if its presence inatmospheric air exceeds maximum allowable concentration (i.e. > 50 ppm)? (A) Benzopyrene (B) Peroxyacetyl nitrate (C) Carbon monoxide (D) Sulphur dioxide

Last Answer : (C) Carbon monoxide

The maximum allowable Los Angeles abrasion value for high quality surface course is (A) 10 % (B) 20 % (C) 30 % (D) 45 %

Description : The maximum allowable Los Angeles abrasion value for high quality surface course is (A) 10 % (B) 20 % (C) 30 % (D) 45 %

Last Answer : Answer: Option C

For an over –reinforced (singly reinforced )rectangular reinforced concrete section (a) The lever arm will be less than that for a balanced section (b) The maximum stress developed by concrete will be equal to allowable stress in concrete (c) The maximum stress developed by steel will be equal to the allowable (d) All the above

Description : For an over -reinforced (singly reinforced )rectangular reinforced concrete section (a) The lever arm will be less than that for a balanced section (b) The maximum stress developed by concrete will be equal ... c) The maximum stress developed by steel will be equal to the allowable (d) All the above

Last Answer : (b) The maximum stress developed by concrete will be equal to allowable stress in concrete

Maximum allowable spacing of shear reinforcement for inclined stirrups with an inclination of 45° is restricted to [ A ] 0.75 d [ B ] 0.45 d [ C ] 0.90 d [ D ] d

Description : Maximum allowable spacing of shear reinforcement for inclined stirrups with an inclination of 45° is restricted to [ A ] 0.75 d [ B ] 0.45 d [ C ] 0.90 d [ D ] d

Last Answer : [ D ] d

Maximum allowable spacing of shear reinforcement for vertical stirrups is restricted to [ A ] d [ B ] 0.45 d [ C ] 0.75 d [ D ] 0.90 d

Description : Maximum allowable spacing of shear reinforcement for vertical stirrups is restricted to [ A ] d [ B ] 0.45 d [ C ] 0.75 d [ D ] 0.90 d

Last Answer : [ C ] 0.75 d

Maximum allowable shear stress for M25 grade concrete is [ A ] 2.5 N/mm2 [ B ] 2.8 N/mm2 [ C ] 3.1 N/mm2 [ D ] 3.5 N/mm2

Description : Maximum allowable shear stress for M25 grade concrete is [ A ] 2.5 N/mm2 [ B ] 2.8 N/mm2 [ C ] 3.1 N/mm2 [ D ] 3.5 N/mm2

Last Answer : [ C ] 3.1 N/mm2

According to IS:456-2000, the maximum allowable crack width (in mm) for mild type of environmental condition [ A ] 0.1 [ B ] 0.2 [ C ] 0.25 [ D ] 0.3

Description : According to IS:456-2000, the maximum allowable crack width (in mm) for mild type of environmental condition [ A ] 0.1 [ B ] 0.2 [ C ] 0.25 [ D ] 0.3

Last Answer : [ D ] 0.3

According to IS:456-2000, the maximum allowable crack width (in mm) for mild type of environmental condition [ A ] 0.1 [ B ] 0.2 [ C ] 0.25 [ D ] 0.3

Description : According to IS:456-2000, the maximum allowable crack width (in mm) for mild type of environmental condition [ A ] 0.1 [ B ] 0.2 [ C ] 0.25 [ D ] 0.3

Last Answer : [ D ] 0.3

What is the maximum OCV allowable to initiate an arc when using A. C current? a) 1000V b) 10V c) 90V d) 900V

Description : What is the maximum OCV allowable to initiate an arc when using A. C current? a) 1000V b) 10V c) 90V d) 900V

Last Answer : c) 90V

According to ASME code, maximum allowable shear stress is taken as X% of yield strength or Y% of ultimate strength. a) X=30 Y=18 b) X=30 Y=30 c) X=18 Y=18 d) X=18 Y=30

Description : According to ASME code, maximum allowable shear stress is taken as X% of yield strength or Y% of ultimate strength. a) X=30 Y=18 b) X=30 Y=30 c) X=18 Y=18 d) X=18 Y=30

Last Answer : a) X=30 Y=18

A square object of 4 mm is subjected to a force of 3000 N. What is the maximum allowable shear stress acting on it? a. 250.14 mm2 b. 281.25 mm2 c. 400.32 mm2 d. 500 mm2

Description : A square object of 4 mm is subjected to a force of 3000 N. What is the maximum allowable shear stress acting on it? a. 250.14 mm2 b. 281.25 mm2 c. 400.32 mm2 d. 500 mm2

Last Answer : b. 281.25 mm2

A circular pipe is subjected to maximum shear force of 60 kN. What is the diameter of the pipe if maximum allowable shear stress is 5 Mpa? a. 27.311 mm b. 75.56 mm c. 142.72 mm d. 692.10 mm

Description : A circular pipe is subjected to maximum shear force of 60 kN. What is the diameter of the pipe if maximum allowable shear stress is 5 Mpa? a. 27.311 mm b. 75.56 mm c. 142.72 mm d. 692.10 mm

Last Answer : c. 142.72 mm

The maximum pressure which the soil can carry safely without the risk of shear failure is called a) Safe bearing capacity b) Ultimate bearing capacity* c) Allowable bearing capacity d) Shear bearing capacity

Description : The maximum pressure which the soil can carry safely without the risk of shear failure is called a) Safe bearing capacity b) Ultimate bearing capacity* c) Allowable bearing capacity d) Shear bearing capacity

Last Answer : b) Ultimate bearing capacity*

A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) Decreases (B) Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Description : A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) ... Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Last Answer : (C) Is at the highest allowable temperature throughout

What type of temperature coefficient material does not produce increased heat in response to increased current flow?

Description : What type of temperature coefficient material does not produce increased heat in response to increased current flow?

Last Answer : Zero-temperature coefficient.

What is Allowable storage fee for vehicles in California?

Description : What is Allowable storage fee for vehicles in California?

Last Answer : Feel Free to Answer

Allowable pressure on high-pressure side or ammonia absorption system is of the order of (a) atmospheric pressure (b) slightly above atmospheric pressure (c) 2-4 bars (d) 5-6 bars

Description : Allowable pressure on high-pressure side or ammonia absorption system is of the order of (a) atmospheric pressure (b) slightly above atmospheric pressure (c) 2-4 bars (d) 5-6 bars

Last Answer : Ans: d

An approach that designs test cases by looking at the allowable data values. a) Data coverage b) Code Coverage c) Debugging d) Validation

Description : An approach that designs test cases by looking at the allowable data values. a) Data coverage b) Code Coverage c) Debugging d) Validation

Last Answer : Answer: a Explanation: Data coverage is an approach that designs test cases by looking at the allowable data values. Code coverage is an approach that designs test cases by looking at the code

An approach that designs test cases by looking at the allowable data values. a) Maintenance b) Evaluation c) Data coverage d) Validation

Description : An approach that designs test cases by looking at the allowable data values. a) Maintenance b) Evaluation c) Data coverage d) Validation

Last Answer : Answer: c Explanation: Data coverage is the term used. It is responsible for designing the test cases

The allowable deviation ratio of commercial FM broadcast. A. 25 B. 15 C. 5 D. 75

Description : The allowable deviation ratio of commercial FM broadcast. A. 25 B. 15 C. 5 D. 75

Last Answer : C. 5

In distillation columns, the number of bubble caps per tray primarily depends upon the (A) Allowable liquid velocity (B) Allowable gas velocity (C) Allowable gas and liquid velocities

Description : In distillation columns, the number of bubble caps per tray primarily depends upon the (A) Allowable liquid velocity (B) Allowable gas velocity (C) Allowable gas and liquid velocities

Last Answer : (C) Allowable gas and liquid velocities

A Unit Price (UP) contract provides: 1. a reimbursement of allowable costs plus a fixed fee which is paid proportionately as the contract progresses 2. a reimbursement of allowable cost of services performed plus an agreed upon percentage of the estimated cost as profit 3. the supplier with a fixed price for delivered performance plus a predetermined fee for superior performance 4. a fixed price where the supplier agrees to furnish goods and services at unit rates and the final price is dependent on the quantities needed to carry out the work.

Description : A Unit Price (UP) contract provides: 1. a reimbursement of allowable costs plus a fixed fee which is paid proportionately as the  contract progresses  2. a reimbursement of allowable cost of services ... unit rates and the  final price is dependent on the quantities needed to carry out the work.

Last Answer : 4. a fixed price where the supplier agrees to furnish goods and services at unit rates and the  final price is dependent on the quantities needed to carry out the work

Determine the length of kennedy key required to transmit 1200N-m and allowable shear in the key is 40N/mm2. The diameter of shaft and width of key can be taken as 40mm and 10mm respectively. a) 49mm b) 36mm c) 46mm d) 53mm

Description : Determine the length of kennedy key required to transmit 1200N-m and allowable shear in the key is 40N/mm2. The diameter of shaft and width of key can be taken as 40mm and 10mm respectively. a) 49mm b) 36mm c) 46mm d) 53mm

Last Answer : d) 53mm