Pick up the correct statement from the following: (A) Solder material is an alloy which melts at a temperature above 400°C (B) Brazing is done at temperature above 600°C to 1100°C (C) Brazing joint is stronger than the solder joint (D) All the above

Pick up the correct statement from the following:
(A) Solder material is an alloy which melts at a temperature above 400°C
(B) Brazing is done at temperature above 600°C to 1100°C
(C) Brazing joint is stronger than the solder joint
(D) All the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Brazing filler metal used for joining steel plates (A) Melts below the melting points of base metals (B) Melts below 300°C (C) Is copper phosphorous alloy

Description : Brazing filler metal used for joining steel plates (A) Melts below the melting points of base metals (B) Melts below 300°C (C) Is copper phosphorous alloy

Last Answer : (A) Melts below the melting points of base metals

Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction (D) Nichrome, a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Description : Pick out the wrong statement. (A) Alloys are harder than their component elements (B) Presence of silicon in steel decreases its electrical resistance (C) Karbate is an acid resistant material of construction ... , a steel alloyed with 10% Ni and 20% Cr can be used upto a temperature of 1100°C

Last Answer : (B) Presence of silicon in steel decreases its electrical resistance

Hardening is a process of heating a metal to a) 400°C b) 500°C c) 600°C d) 700°C

Description : Hardening is a process of heating a metal to a) 400°C b) 500°C c) 600°C d) 700°C

Last Answer : c) 600°C

Pick up the correct statement from the following: (A) The free quartz suddenly expands at a temperature lower than 600°C (B) The lime stone resists fire upto about 800°C and at higher temperature it splits into CaO and CO2 (C) The sand stone with silicates resist a fire in a better way (D) All the above

Description : Pick up the correct statement from the following: (A) The free quartz suddenly expands at a temperature lower than 600°C (B) The lime stone resists fire upto about 800°C and at higher temperature it splits into ... (C) The sand stone with silicates resist a fire in a better way (D) All the above

Last Answer : Answer: Option D

Compare Brazing and Soldering on the basis of : (i) Temperature Used. (ii) Filler Material. (iii) Joint Strength (iv) Applications.

Description : Compare Brazing and Soldering on the basis of : (i) Temperature Used. (ii) Filler Material. (iii) Joint Strength (iv) Applications.

Last Answer : Comparison of Brazing and Soldering:

The largest consumption of zinc for alloys is in the making of (A) Bearing metal (B) Brasses (C) Brazing solder

Description : The largest consumption of zinc for alloys is in the making of (A) Bearing metal (B) Brasses (C) Brazing solder

Last Answer : (B) Brasses

Use of flux during soldering is done to (A) Increase fluidity of solder by lowering its melting temperature (B) Prevent oxide formation (C) Wash away surplus solder (D) Full up the joint gap

Description : Use of flux during soldering is done to (A) Increase fluidity of solder by lowering its melting temperature (B) Prevent oxide formation (C) Wash away surplus solder (D) Full up the joint gap

Last Answer : (B) Prevent oxide formation

. Lap joints are preferred over butt joints in soldering/brazing, because these joints are (A) Weaker in tension but stronger in shear (B) Weaker in shear but stronger in tension (C) Stronger in both shear and tension (D) The lap joints are easily made

Description : . Lap joints are preferred over butt joints in soldering/brazing, because these joints are (A) Weaker in tension but stronger in shear (B) Weaker in shear but stronger in tension (C) Stronger in both shear and tension (D) The lap joints are easily made

Last Answer : r: Option D

Pick up the correct statement from the following: (A) Illite bond is weaker than Kaolinite bond (B) Illite bond is stronger than montmorillonite bond (C) Illite does not swell when wet (D) All the above

Description : Pick up the correct statement from the following: (A) Illite bond is weaker than Kaolinite bond (B) Illite bond is stronger than montmorillonite bond (C) Illite does not swell when wet (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The lime in excess makes the cement unsound and causes the cement to expand and disintegrate (B) The silica in excess makes the cement stronger but its setting time also increases (C) The excess amount of alumina weakens the cement (D) All the above

Description : Pick up the correct statement from the following: (A) The lime in excess makes the cement unsound and causes the cement to expand and disintegrate (B) The silica in excess makes the cement stronger ... time also increases (C) The excess amount of alumina weakens the cement (D) All the above

Last Answer : Answer: Option D

Out of the following, the joint produced by __________ has the lowest strength. (A) Soldering (B) Welding (C) Brazing (D) Riveting

Description : Out of the following, the joint produced by __________ has the lowest strength. (A) Soldering (B) Welding (C) Brazing (D) Riveting

Last Answer : (A) Soldering

Pick out the wrong statement. (A) Weldability of high carbon steel is poorer compared to low carbon steel (B) Invar is a magnetic alloy (C) Magnetic permeability of the diamagnetic material is less than one (D) Martenistic transformation never goes to completion (i.e., 100%) at room temperature

Description : Pick out the wrong statement. (A) Weldability of high carbon steel is poorer compared to low carbon steel (B) Invar is a magnetic alloy (C) Magnetic permeability of the diamagnetic material is less than one (D) Martenistic transformation never goes to completion (i.e., 100%) at room temperature

Last Answer : Option B

When troubleshooting an electronic circuit, a cold solder joint can be located with the aid of an ohmmeter. Once the problem has been located, you should _________________. A. reheat the circuit in an oven to an even temperature and recheck with an ohmmeter B. reheat the connection with a match and recheck with an ohmmeter C. reheat connection with a soldering tool and recheck with an ohmmeter D. do nothing as this is the normal condition

Description : When troubleshooting an electronic circuit, a cold solder joint can be located with the aid of an ohmmeter. Once the problem has been located, you should _________________. A. reheat the circuit in an ... a soldering tool and recheck with an ohmmeter D. do nothing as this is the normal condition

Last Answer : Answer: C

An alloy used in making heating elements for electric heating device is - (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Description : An alloy used in making heating elements for electric heating device is - (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Last Answer : (3) Nichrome Explanation: Nichrome is a mixture of chromium and nickel. Nichrome wire is a great conductor of electricity. Nichrome is used to make heating coils and other types of elements in household appliances.

Solder metal is an alloy of – (1) lead and tin (2) lead and antimony (3) copper and zinc (4) copper and tin

Description : Solder metal is an alloy of – (1) lead and tin (2) lead and antimony (3) copper and zinc (4) copper and tin

Last Answer : (1) lead and tin Explanation: A solder is a fusible metal alloy of tin and lead with a melting point or melting range of 90 to 450°C, used in a process called soldering where it is melted to jain metallic surfaces. It is especially useful in electronics and plumbing.

Solder is an alloy of – (1) lead, zinc (2) copper, lead (3) tin, lead (4) sodium, lead

Description : Solder is an alloy of – (1) lead, zinc (2) copper, lead (3) tin, lead (4) sodium, lead

Last Answer : (3) tin, lead Explanation: Tin/lead solders, also called soft solders, are commercially available with tin concentrations between 5% and 70% by weight. The greater the tin concentration, the greater the solder ... at 370 °F or 188 °C and 63/37 Sn/Pb used principally in electrical/electronic work.

Which of the following is not an alloy of tin? (A) White-bearing metal (B) Pewter type metal (C) Soft solder (D) German silver

Description : Which of the following is not an alloy of tin? (A) White-bearing metal (B) Pewter type metal (C) Soft solder (D) German silver

Last Answer : (D) German silver

What is the tin-lead alloy percentage of solder used for electrical connectors, splices, and terminal lugs?

Description : What is the tin-lead alloy percentage of solder used for electrical connectors, splices, and terminal lugs?

Last Answer : 60-percent tin and 40-percent lead (60/40 solder).

Solder used in electronic repair is normally an alloy of what two elements? Solder used in electronic repair is normally an alloy of what two elements?

Description : Solder used in electronic repair is normally an alloy of what two elements?

Last Answer : Tin and lead.

An alloy used in making heating elements for electric heating device is (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Description : An alloy used in making heating elements for electric heating device is (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Last Answer : Nichrome

Solder metal is an alloy of (1) lead and tin (2) lead and antimony (3) copper and zinc (4) copper and tin

Description : Solder metal is an alloy of (1) lead and tin (2) lead and antimony (3) copper and zinc (4) copper and tin

Last Answer : lead and tin

Solder is an alloy of (1) lead, zinc (2) copper, lead (3) tin, lead (4) sodium, lead

Description : Solder is an alloy of (1) lead, zinc (2) copper, lead (3) tin, lead (4) sodium, lead

Last Answer : tin, lead

Solder is an alloy of?

Description : Solder is an alloy of?

Last Answer : Solder is an alloy of tin and lead.

The part of a fuse that melts and opens the circuit is made of _____________. A. copper and antimony B. steel and babbitt C. aluminum or beryllium alloy D. zinc or an alloy of tin and lead

Description : The part of a fuse that melts and opens the circuit is made of _____________. A. copper and antimony B. steel and babbitt C. aluminum or beryllium alloy D. zinc or an alloy of tin and lead

Last Answer : Answer: D

Pick up the correct statement from the following: (A) In a king post truss, principal rafter and tie beams are jointed together with a bridle joint (B) Joint between the principal rafter and the king post is made by making tenon and mortise respectively (C) Joint between strut and king post, is generally of mortise and tenon type (D) All the abov

Description : Pick up the correct statement from the following: (A) In a king post truss, principal rafter and tie beams are jointed together with a bridle joint (B) Joint between the principal rafter and the king ... ) Joint between strut and king post, is generally of mortise and tenon type (D) All the above

Last Answer : Answer: Option D

A capacitor discolored due to excessive heat should be _____________. A. calibrated using a capactance wheatstone bridge B. replaced and the reason for the overheating found C. cooled with a spray can of refrigerant approved for this purpose D. resoldered with care taken to insure that the origional cold solder joint is repaired

Description : A capacitor discolored due to excessive heat should be _____________. A. calibrated using a capactance wheatstone bridge B. replaced and the reason for the overheating found C. cooled with a spray ... purpose D. resoldered with care taken to insure that the origional cold solder joint is repaired

Last Answer : Answer: B

What causes a "fractured solder" joint?

Description : What causes a "fractured solder" joint?

Last Answer : Movement of the parts being soldered while the solder is cooling.

Pick out the wrong statement. (A) Bronze is an alloy of copper & tin (B) Brass is an alloy of copper & zinc (C) The alloy named 'German silver' does not contain any silver (D) The ability of a material to fracture without appreciable deformation is called its ductility

Description : Pick out the wrong statement. (A) Bronze is an alloy of copper & tin (B) Brass is an alloy of copper & zinc (C) The alloy named 'German silver' does not contain any silver (D) The ability of a material to fracture without appreciable deformation is called its ductility

Last Answer : (D) The ability of a material to fracture without appreciable deformation is called its ductility

Out of the following fuels used in a furnace exhausting flue gas at a temperature of 600°C, the percentage stack loss will be maximum in case ofcomplete combustion of(A) Furnace oil with air(B) Furnace oil with oxygen(C) Blast furnace gas with air(D) Blast furnace gas with oxygen

Description : Out of the following fuels used in a furnace exhausting flue gas at a temperature of 600°C, the percentage stack loss will be maximum in case ofcomplete combustion of (A) Furnace oil with air (B) Furnace oil with oxygen (C) Blast furnace gas with air (D) Blast furnace gas with oxygen

Last Answer : (C) Blast furnace gas with air

Maximum stability of white phosphorous is at (A) Very high pressure (B) Atmospheric pressure (C) Room temperature (D) > 600°C

Description : Maximum stability of white phosphorous is at (A) Very high pressure (B) Atmospheric pressure (C) Room temperature (D) > 600°C

Last Answer : (D) > 600°C

A perfect gas at 27°C is heated at constant pressure till its volume is double. The final temperature is  (a) 54°C  (b) 327°C  (c) 108°C  (d) 654°C  (e) 600°C

Description : A perfect gas at 27°C is heated at constant pressure till its volume is double. The final temperature is  (a) 54°C  (b) 327°C  (c) 108°C  (d) 654°C  (e) 600°C

Last Answer : Answer : b

For the measurement of temperature of the order of 400°C, what will we prefer?

Description : For the measurement of temperature of the order of 400°C, what will we prefer?

Last Answer : Thermocouple

Combustion of furnace oil in a furnace (soaking pit) with preheated combustion air at 400°C results in saving of about __________ percentfurnace oil as compared to its combustion with atmospheric air, if the fluegas outlet temperature from the soaking pit is 1200°C.(A) 5(B) 60(C) 20(D) 40

Description : Combustion of furnace oil in a furnace (soaking pit) with preheated combustion air at 400°C results in saving of about __________ percentfurnace oil as compared to its combustion with atmospheric air, if the flue gas outlet temperature from the soaking pit is 1200°C. (A) 5 (B) 60 (C) 20 (D) 40

Last Answer : (C) 20

Temperature and pressure in urea autoclave is (A) 120°C and 300 atm (B) 190°C and 200 atm (C) 400°C and 550 atm (D) 200°C and 10 atm

Description : Temperature and pressure in urea autoclave is (A) 120°C and 300 atm (B) 190°C and 200 atm (C) 400°C and 550 atm (D) 200°C and 10 atm

Last Answer : (B) 190°C and 200 atm

Engine pistons are usually made of aluminium alloy because it A. is lighter B. wears less C. Stronger D. absorbs shocks

Description : Engine pistons are usually made of aluminium alloy because it A. is lighter B. wears less C. Stronger D. absorbs shocks

Last Answer : ANSWER : A

Engine pistons are usually made of aluminium alloy as it a. is lighter b. wears less c. absorbs shocks d. is stronger

Description : Engine pistons are usually made of aluminium alloy as it a. is lighter b. wears less c. absorbs shocks d. is stronger

Last Answer : ANSWER a. is lighter

Pick up the incorrect statement (A) The cross-sectional area of the welded member is effective (B) A welded joint develops strength of its parent metal (C) Welded joints provide rigidity (D) Welding takes more time than riveting

Description : Pick up the incorrect statement (A) The cross-sectional area of the welded member is effective (B) A welded joint develops strength of its parent metal (C) Welded joints provide rigidity (D) Welding takes more time than riveting

Last Answer : (D) Welding takes more time than riveting

Pick out the wrong statement. (A) Metal/alloys having hexagonal crystal lattice structure are less malleable than those having cubic crystal lattice structure (B) Metal/alloys having body centred cubic (bcc) crystal lattice structure is stronger & less ductile than those having face centred cubic (fcc) crystal lattice structure (C) Tungsten has a body centred cubic (bcc) crystal lattice structure (D) Both ferritic & austenitic stainless steel has a face centred cubic (fcc) crystal structure

Description : Pick out the wrong statement. (A) Metal/alloys having hexagonal crystal lattice structure are less malleable than those having cubic crystal lattice structure (B) Metal/alloys having body centred cubic ... D) Both ferritic & austenitic stainless steel has a face centred cubic (fcc) crystal structure

Last Answer : (C) Tungsten has a body centred cubic (bcc) crystal lattice structure

Pick out the wrong statement. (A) All the nitrogenous fertilisers are not soluble in water (B) A straight fertiliser contains only one nutrient (C) Calcium cyanamide is used as weed killer in onion fields (D) The phosphorous nutrient makes the plant stem stronger and increases its branches

Description : Pick out the wrong statement. (A) All the nitrogenous fertilisers are not soluble in water (B) A straight fertiliser contains only one nutrient (C) Calcium cyanamide is used as weed killer in onion fields (D) The phosphorous nutrient makes the plant stem stronger and increases its branches

Last Answer : (A) All the nitrogenous fertilisers are not soluble in water

From his experiments, S.L. Miller produced amino acids by mixing the following in a closed flask. (a) CH4, H2, NH3 and water vapor at 800°C (b) CH3, H2, NH4 and water vapor at 800°C (c) CH4, H2, NH3 and water vapor at 600°C (d) CH3, H2, NH3 and water vapor at 600°C

Description : From his experiments, S.L. Miller produced amino acids by mixing the following in a closed flask. (a) CH4, H2, NH3 and water vapor at 800°C (b) CH3, H2, NH4 and water vapor at 800°C (c) CH4, H2, NH3 and water vapor at 600°C (d) CH3, H2, NH3 and water vapor at 600°C

Last Answer : a) CH4, H2, NH3 and water vapor at 800°C

During the carbonisation of coal (A) All tar is evolved at < 600°C (B) Evolution of H2 and formation of methane and aromatics occur at > 700°C (C) Hard semi-coke starts shrinking at 600°C (D) All (A), (B) and (C)

Description : During the carbonisation of coal (A) All tar is evolved at < 600°C (B) Evolution of H2 and formation of methane and aromatics occur at > 700°C (C) Hard semi-coke starts shrinking at 600°C (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The following is the operating temperatures of the sodium –sulphur battery. • 400 to 600°C • 1000 to 1500°C • 300 to 350°C • 100 to 200°C

Description : The following is the operating temperatures of the sodium –sulphur battery. • 400 to 600°C • 1000 to 1500°C • 300 to 350°C • 100 to 200°C

Last Answer : • 300 to 350°C

Pick up the incorrect statement from the following. While performing preliminary test on concrete (A) Proportions of the material and water should be the same as to be used at the work site (B) Cement should be mixed by hand in order to maintain uniformity (C) Concrete mix should be stored in air-tight containers (D) Concrete ingredients should be kept at a temperature of 37° ± 2°C

Description : Pick up the incorrect statement from the following. While performing preliminary test on concrete (A) Proportions of the material and water should be the same as to be used at the work site (B) ... in air-tight containers (D) Concrete ingredients should be kept at a temperature of 37° 2°C

Last Answer : Answer: Option D

Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) Plastic deformation of a material is its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature

Description : Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) ... its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature

Last Answer : (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal

Out of the followings, which welded joint is more stronger (i) Butt joint (ii) Lap joint (iii)Screwed joint

Description : Out of the followings, which welded joint is more stronger (i) Butt joint (ii) Lap joint (iii)Screwed joint

Last Answer : (i) Butt joint

The objective of caulking in a riveted joint is to make the joint (A) Free from corrosion (B) Stronger in tension (C) Free from stress (D) Leak-proof

Description : The objective of caulking in a riveted joint is to make the joint (A) Free from corrosion (B) Stronger in tension (C) Free from stress (D) Leak-proof

Last Answer : (D) Leak-proof

Pick up the correct statement from the following: (A) Acid test is done to find out the weathering quality of stones (B) Attrition test is done to find out the rate of wear of stones which are used in road construction (C) Crushing test is done to find out the compressive strength of the stone (D) All the above

Description : Pick up the correct statement from the following: (A) Acid test is done to find out the weathering quality of stones (B) Attrition test is done to find out the rate of wear of stones which are used ... (C) Crushing test is done to find out the compressive strength of the stone (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C) Curing of concrete is done for proper compaction of cement (D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Description : Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C ... D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Last Answer : Option D

Pick up the correct statement from the following: (A) A mortar joint having a concave finishing in brick masonry, is called keyed joint (B) A mortar joint projecting beyond the face of a masonry wall, is called tucked joint (C) A mortar joint having a recess in it, is called ruled joint (D) All the above

Description : Pick up the correct statement from the following: (A) A mortar joint having a concave finishing in brick masonry, is called keyed joint (B) A mortar joint projecting beyond the face of a masonry wall, is ... (C) A mortar joint having a recess in it, is called ruled joint (D) All the above

Last Answer : Option D

Pick up the correct statement from the following: (A) The volume of underground water extracted by gravity drainage from a saturated soil, is known as yield (B) The ratio of volume drained to the total volume of material drained, is known as specific yield (C) The sum of specific yield and specific retention, is equal to porosity (D) All the above

Description : Pick up the correct statement from the following:  (A) The volume of underground water extracted by gravity drainage from a saturated soil, is  known as yield  (B) The ratio of volume ... ) The sum of specific yield and specific retention, is equal to porosity  (D) All the above

Last Answer : (D) All the above