What tools should be used to install large aluminum terminal lugs and splices?

What tools should be used to install large aluminum terminal  lugs and splices?
by

1 Answer

Answer :

Power-operated crimping tools.
by

Related questions

What is the tin-lead alloy percentage of solder used for electrical connectors, splices, and terminal lugs?

Description : What is the tin-lead alloy percentage of solder used for electrical connectors, splices, and terminal lugs?

Last Answer : 60-percent tin and 40-percent lead (60/40 solder).

Why are preinsulated terminal lugs and splices color coded?

Description : Why are preinsulated terminal lugs and splices color coded?

Last Answer : To identify wire sizes they are to be used on.

Which of the splices discussed is NOT a butted splice? for noninsulated splices and terminal lugs?

Description : Which of the splices discussed is NOT a butted splice? for noninsulated splices and terminal lugs?

Last Answer : Spaghetti or heat-shrinkable tubing.

Why should a lockwasher never be used with an aluminum terminal?

Description : Why should a lockwasher never be used with an aluminum terminal?

Last Answer : It gouges the terminal lug and causes deterioration.

Should aluminum wire be cleaned prior to installing an aluminum terminal lug or splice?

Description : Should aluminum wire be cleaned prior to installing an aluminum terminal lug or splice?

Last Answer : No, it is done automatically by the petroleum abrasive compound that comes in the terminal or splices.

Why are splices staggered on multiconductor cables?

Description : Why are splices staggered on multiconductor cables?

Last Answer : To prevent the joint from being bulky.

Crimping Lugs Practical

Description : Crimping Lugs Practical 

Last Answer : Practical Significance Lugs or connectors are used at the cable ends, when permanent, direct fastening methods are not feasible or necessary. Cables are connected to bus bars with the ... The correct compression or crimping sequence must be followed and the full compression pressure applied.

How many types of splices and what are they ?

Description : How many types of splices and what are they ?

Last Answer : Two types. E.g. a. Straight line splices , b. Interlock splices.

What is the importance of wire splices?

Description : What is the importance of wire splices?

Last Answer : Splicing a method to connect two wires. If the slicing is notcorrect, it may lead to localized heating, burn out, break in thecircuit, disconnection of the two wires.

What is the importance of wire splices?

Description : What is the importance of wire splices?

Last Answer : Splicing a method to connect two wires. If the slicing is notcorrect, it may lead to localized heating, burn out, break in thecircuit, disconnection of the two wires.

What is the insertion loss of connector-type splices for a single mode fiber optics? a. 0.51dB b. 0.31dB c. 0.49dB d. 0.38dB

Description : What is the insertion loss of connector-type splices for a single mode fiber optics? a. 0.51dB b. 0.31dB c. 0.49dB d. 0.38dB

Last Answer : d. 0.38dB

What is the insertion loss of connector type splices for a single mode optical fiber? A. 0.51 dB B. 0.49 dB C. 0.31 dB D. 0.38 db

Description : What is the insertion loss of connector type splices for a single mode optical fiber? A. 0.51 dB B. 0.49 dB C. 0.31 dB D. 0.38 db

Last Answer : D. 0.38 db

Insertion loss of connector-type splices for a single-mode fiber cable. A. 0.2 dB B. 0.3 dB C. 0.09 dB D. 0.38 dB

Description : Insertion loss of connector-type splices for a single-mode fiber cable. A. 0.2 dB B. 0.3 dB C. 0.09 dB D. 0.38 dB

Last Answer : D. 0.38 dB

A re-planning agent uses execution monitoring and splices in repairs as needed. a) True b) False

Description : A re-planning agent uses execution monitoring and splices in repairs as needed. a) True b) False

Last Answer : a) True

Lapped splices in tensile reinforcement are generally not used for bars of size larger than (A) 18 mm diameter (B) 24 mm diameter (C) 30 mm diameter (D) 36 mm diameter

Description : Lapped splices in tensile reinforcement are generally not used for bars of size larger than (A) 18 mm diameter (B) 24 mm diameter (C) 30 mm diameter (D) 36 mm diameter

Last Answer : Answer: Option D

Consider the following statements in respect of design of web and flange as splices: 1. Flange splice shall be designed for actual BM at the section. 2. Flange splice shall be designed to resist the actual shear at the section. 3. Web splice shall be designed to resist the actual shear at the section 4. Web splice shall be designed for actual BM. Which of these statements are correct? (a) 1 and 3 (b) 2 and 3 (c) 3 and 4 (d)1 and 4

Description : Consider the following statements in respect of design of web and flange as splices: 1. Flange splice shall be designed for actual BM at the section. 2. Flange splice shall be designed to resist the actual shear at the section. 3. Web ... are correct? (a) 1 and 3 (b) 2 and 3 (c) 3 and 4 (d)1 and 4

Last Answer : (a) 1 and 3

Loss comparisons between fusion splices an mechanical splices ∙ A. 1:10 ∙ B. 10:1 ∙ C. 20:1 ∙ D. 1:20

Description : Loss comparisons between fusion splices an mechanical splices ∙ A. 1:10 ∙ B. 10:1 ∙ C. 20:1 ∙ D. 1:20

Last Answer : A. 1:10

What is the insertion loss of connector-type splices for a single mode fiber optics? ∙ a. 0.51 dB ∙ b. 0.31 dB ∙ c. 0.49 dB ∙ d. 0.38 dB

Description : What is the insertion loss of connector-type splices for a single mode fiber optics? ∙ a. 0.51 dB ∙ b. 0.31 dB ∙ c. 0.49 dB ∙ d. 0.38 dB

Last Answer : d. 0.38 dB

In flange splices when the number of hammer and hand loose rivets is 30% or more of the total rivets on any side of the splice location, a) Need no be renewed b) wait for 100% loose rivets c) all the rivets should be renewed.* d) None of the above

Description : In flange splices when the number of hammer and hand loose rivets is 30% or more of the total rivets on any side of the splice location, a) Need no be renewed b) wait for 100% loose rivets c) all the rivets should be renewed.* d) None of the above

Last Answer : c) all the rivets should be renewed.*

How to Install Aluminum Fence Posts?

Description : How to Install Aluminum Fence Posts?

Last Answer : The first thing that must be done when installing an aluminumfence is to make sure that the area is ready for the fence posts.There may be a fence permit required in order to install a fencearound ... . The first posts that will be put into the ground are thecorner and end posts. The stake

When portable cords are connected to devices such as portable tools, you must eliminate direct tension on the joints or terminal screws. Coast Guard Regulations (46 CFR), allow this to be done by _____________. A. knotting the cords together at the plugs B. taping the plugs together C. installing a special fitting to eliminate plug separation D. all of the above

Description : When portable cords are connected to devices such as portable tools, you must eliminate direct tension on the joints or terminal screws. Coast Guard Regulations (46 CFR), allow this to be done by ... the plugs together C. installing a special fitting to eliminate plug separation D. all of the above

Last Answer : Answer: D

What tool should be used to strip aluminum wire?

Description : What tool should be used to strip aluminum wire?

Last Answer : Knife.

State four advantages of copper over aluminum as a conductor.

Description : State four advantages of copper over aluminum as a conductor.

Last Answer : It has higher conductivity, it is more ductile, it has relatively high tensile strength, and it can be easily soldered.

State two advantages of using aluminum wire for carrying electricity over long distances.

Description : State two advantages of using aluminum wire for carrying electricity over long distances.

Last Answer : It is light and reduces corona.

What are the basic requirements for any splice or terminal connection?

Description : What are the basic requirements for any splice or terminal connection?

Last Answer : The connection must be both mechanically and electrically as strong as the conductor or device with which it is used

What is a major advantage of the crimped terminal over the soldered terminal?

Description : What is a major advantage of the crimped terminal over the soldered terminal?

Last Answer : Requires relatively little operator skill to install.

In order to reverse bias in a PN junction, what terminal of a battery is connected to the P material?

Description : In order to reverse bias in a PN junction, what terminal of a battery is connected to the P material?

Last Answer : Negative.

The work center supervisor can update what items from a user terminal?

Description : The work center supervisor can update what items from a user terminal?

Last Answer : COSAL, APL, EIC, SHIP'S FORCE WORK LIST, and CSMP.

What is the range of earth terminal transmitter output power?

Description : What is the range of earth terminal transmitter output power?

Last Answer : Up to 20 kilowatts.

What is the function of a tone terminal set?

Description : What is the function of a tone terminal set?

Last Answer : It converts dc to audio or vice versa.

Why will a meter indicate more voltage at the battery terminal when the battery is out of a circuit than when the battery is in a circuit?

Description : Why will a meter indicate more voltage at the battery terminal when the battery is out of a circuit than when the battery is in a circuit?

Last Answer : The internal (source) resistance of the battery will drop some of the voltage

In the primary cell, why are negative ions attracted to the negative terminal of the cell?

Description : In the primary cell, why are negative ions attracted to the negative terminal of the cell?

Last Answer : The positive charge caused by electrons leaving the negative electrode attracts the negative ions.

An ammeter should always be connected so that current will flow into what terminal and out of what terminal?

Description : An ammeter should always be connected so that current will flow into what terminal and out of what terminal?

Last Answer : Negative, positive

Is it possible to install the Blackberry Desktop Software without the user tools CD?

Description : Is it possible to install the Blackberry Desktop Software without the user tools CD?

Last Answer : You can download the software from here.

Are there any tools needed to install a window mount for a GPS?

Description : Are there any tools needed to install a window mount for a GPS?

Last Answer : This is dependent on the GPS unit you have as well as the mount. There are some that are just suction cups, so no tools are required. However, there are others that screw in. Those would require a screwdriver.

What tools do I need to install gutters?

Description : What tools do I need to install gutters?

Last Answer : To install gutters you will need the following tools: a ladder, tape measure, chalk line levels (string and carpenter's), power drill and screwdriver bits, fine tooth hacksaw, rust resistant (galvanized) screws, ... , which are both easier to use on a ladder. Tin snips might be needed for some jobs.

Can I install a Bluetooth car kit myself, or will I need special tools?

Description : Can I install a Bluetooth car kit myself, or will I need special tools?

Last Answer : You can install a Bluetooth car kit yourself. In addition to the components of the car kit, you will likely need a drill and a drill bit of the size indicated in the Bluetooth car kit.

What tools are needed to install the Frameless Shower Door?

Description : What tools are needed to install the Frameless Shower Door?

Last Answer : The frameless shower door requires a drill and a set of Phillips drill bits in order to properly install.

What tools so I need to install a lift kit?

Description : What tools so I need to install a lift kit?

Last Answer : Four 6-ton jackstands, two 12-ton jackstands, and two floor jacks. Assorted air tools including impact, ratchet, and angle drill. An angle grinder and sawsall. Impact sockets in metric and standard. Open and closed end wrenches in metric and standard.

What plumbing tools do I need to install a garbage disposal?

Description : What plumbing tools do I need to install a garbage disposal?

Last Answer : To install a new garbage disposal you will need: a wrench, Philips screwdriver, flat screwdriver, a hose clamp, plumber's putty, and wire nuts. http://Plumbing.lifetips.com/cat/64351/garbage-disposer/index.html

Why is steel wool NEVER used as an abrasive to clean soldering tools?

Description : Why is steel wool NEVER used as an abrasive to clean soldering tools?

Last Answer : The strands can fall into electrical equipment being worked on and cause short circuits.

How many tools are used in flowcharting?

Description : How many tools are used in flowcharting?

Last Answer : Four.

What agencies provide training, tools, equipment, and certification of the 2M system?

Description : What agencies provide training, tools, equipment, and certification of the 2M system?

Last Answer : Naval Sea Systems Command (NAVSEASYSCOM) and Naval Air Systems Command (NAVAIRSYSCOM)

What is used to install self-clinching cable straps?

Description : What is used to install self-clinching cable straps?

Last Answer : Military Standard hand tool.

Two 12 ft. sections of aluminum siding are placed end to end on the outside wall of house. How large a gap should be left between the pieces to prevent buckling if the temperature can change by 55˚C?  a. 0.21 m  b. 0.18 m  c. 0.31 in  d. 0.18 in

Description : Two 12 ft. sections of aluminum siding are placed end to end on the outside wall of house. How large a gap should be left between the pieces to prevent buckling if the temperature can change by 55˚C?  a. 0.21 m  b. 0.18 m  c. 0.31 in  d. 0.18 in

Last Answer : 0.18 in

Which of the following types of lung cancer is characterized as fast growing and tending to arise peripherally? a) Large cell carcinoma Large cell carcinoma is a fast-growing tumor that tends to arise peripherally. b) Bronchioalveolar carcinoma Bronchioalveolar cell cancer arises from the terminal bronchus and alveoli and is usually slow-growing. c) Adenocarcinoma Adenocarcinoma presents as peripheral masses or nodules and often metastasizes. d) Squamous cell carcinoma Squamous cell carcinoma arises from the bronchial epithelium and is more centrally located.

Description : Which of the following types of lung cancer is characterized as fast growing and tending to arise peripherally? a) Large cell carcinoma Large cell carcinoma is a fast-growing tumor that ... cell carcinoma Squamous cell carcinoma arises from the bronchial epithelium and is more centrally located.

Last Answer : a) Large cell carcinoma Large cell carcinoma is a fast-growing tumor that tends to arise peripherally.

When the front of a glacier is stationary for a long time, the glacier will do which of the following? w) form many crevasses x) melt away y) not erode its bed z) build a large terminal moraine

Description : When the front of a glacier is stationary for a long time, the glacier will do which of the following? w) form many crevasses x) melt away y) not erode its bed z) build a large terminal moraine

Last Answer : ANSWER: Z -- BUILD A LARGE TERMINAL MORAINE

An Intelligent terminal (1) has a microprocessor, but cannot be programmed by the user (2) can process small data processing jobs, with the use of a large CPU (3) interacts with the user in English (4) cannot take data from the user

Description : An Intelligent terminal (1) has a microprocessor, but cannot be programmed by the user (2) can process small data processing jobs, with the use of a large CPU (3) interacts with the user in English (4) cannot take data from the user

Last Answer : can process small data processing jobs, with the use of a large CPU 

Universal motors will operate on AC or DC current, and are generally found in _____________. A. portable tools B. large pump motors C. turbo electric main motors D. forced draft fans

Description : Universal motors will operate on AC or DC current, and are generally found in _____________. A. portable tools B. large pump motors C. turbo electric main motors D. forced draft fans

Last Answer : Answer: A

Large tools and machines used in a production process for a considerable length of time are classified as A)major equipment. B)accessory equipment. C)component parts. D)raw materials. E)consumable supplies.

Description : Large tools and machines used in a production process for a considerable length of time are classified as A)major equipment. B)accessory equipment. C)component parts. D)raw materials. E)consumable supplies.

Last Answer : A)major equipment