Ten signals, each requiring 3000 Hz, are multiplexed on to a single channel using FDM. How much minimum bandwidth is required for the multiplexed channel ? Assume that the guard bands are 300 Hz wide. (A) 30,000 (B) 32,700 (C) 33,000 (D) None of the above

Ten signals, each requiring 3000 Hz, are multiplexed on to a single channel using FDM. How much minimum bandwidth is required for the multiplexed channel ? Assume that the guard bands are 300 Hz wide. (A) 30,000 (B) 32,700 (C) 33,000 (D) None of the above
by

1 Answer

Answer :

(B) 32,700
by

Related questions

Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it is assumed that each sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Description : Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it ... sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Last Answer : (C) 128 kbps

Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is ............... (A) 400 bps (B) 800 bps (C) 1600 bps (D) 3200 bps

Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is ............... (A) 400 bps (B) 800 bps (C) 1600 bps (D) 3200 bps

Last Answer : (D) 3200 bps Answer: D Explanation: The multiplexer is shown in the Figure. Each frame carries 1 byte from each channel; the size of each frame, therefore, is 4 bytes, or 32 bits. Because each ... channel, the frame rate must be 100 frames per second. The bit rate is 100 32 = 3200 bps. 

What is the channel bandwidth of a standard analogue telephone system? A. 300-500 Hz B. 1200 kHz C. 100-300 Hz D. 300-3400 Hz

Description : What is the channel bandwidth of a standard analogue telephone system? A. 300-500 Hz B. 1200 kHz C. 100-300 Hz D. 300-3400 Hz

Last Answer : D. 300-3400 Hz

Assume that we need to download text documents at the rate of 100 pages per minute. A page is an average of 24 lines with 80 characters in each line and each character requires 8 bits. Then the required bit rate of the channel is ................ (A) 1.636 Kbps (B) 1.636 Mbps (C) 2.272 Mbps (D) 3.272 Kbps

Description : Assume that we need to download text documents at the rate of 100 pages per minute. A page is an average of 24 lines with 80 characters in each line and each character requires 8 bits. Then the required bit rate of the channel is ... ...... (A) 1.636 Kbps (B) 1.636 Mbps (C) 2.272 Mbps (D) 3.272 Kbps

Last Answer : Answer: Marks given to all

Station A uses 32 byte packets to transmit messages to station B using sliding window protocol. The round trip delay between A and B is 40 milli seconds and the bottleneck bandwidth on the path between A and B is 64 kbps. The optimal window size of A is (1) 20 (2) 10 (3) 30 (4) 40

Description : Station A uses 32 byte packets to transmit messages to station B using sliding window protocol. The round trip delay between A and B is 40 milli seconds and the bottleneck bandwidth on the path between A and B is 64 kbps. The optimal window size of A is (1) 20 (2) 10 (3) 30 (4) 40

Last Answer : (2) 10

Consider a 32 - bit microprocessor, with a 16 - bit external data bus, driven by an 8 MHz input clock. Assume that the microprocessor has a bus cycle whose minimum duration equals four input clock cycles. What is the maximum data transfer rate for this microprocessor? (A) 8x106 bytes/sec (B) 4x106 bytes/sec (C) 16x106 bytes/sec (D) 4x109 bytes/sec

Description : Consider a 32 - bit microprocessor, with a 16 - bit external data bus, driven by an 8 MHz input clock. Assume that the microprocessor has a bus cycle whose minimum duration equals four input clock cycles. What ... (A) 8x106 bytes/sec (B) 4x106 bytes/sec (C) 16x106 bytes/sec (D) 4x109 bytes/sec 

Last Answer : (B) 4x106 bytes/sec

Consider the fractional knapsack instance n = 4, (p1, p2, p3, p4) = (10, 10, 12, 18), (w1, w2, w3, w4) = (2, 4, 6, 9) and M = 15. The maximum profit is given by (Assume p and w denotes profit and weight of objects respectively) (A) 40 (B) 38 (C) 32 (D) 30

Description : Consider the fractional knapsack instance n = 4, (p1, p2, p3, p4) = (10, 10, 12, 18), (w1, w2, w3, w4) = (2, 4, 6, 9) and M = 15. The maximum profit is given by (Assume p and w denotes profit and weight of objects respectively) (A) 40 (B) 38 (C) 32 (D) 30

Last Answer : (B) 38

Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Last Answer : d. 3200 bps

A pure ALOHA Network transmit 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is .............. (A) 0.384 (B) 0.184 (C) 0.286 (D) 0.586

Description : A pure ALOHA Network transmit 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is .............. (A) 0.384 (B) 0.184 (C) 0.286 (D) 0.586

Last Answer : (B) 0.184

A gas is compressed in a cylinder by a movable piston to a volume onehalf its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be  (a) 300 Nm  (b) 300,000 Nm  (c) 30 Nm  (d) 3000 Nm  (e) 30,000 Nm.

Description : A gas is compressed in a cylinder by a movable piston to a volume onehalf its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be  (a) 300 Nm  (b) 300,000 Nm  (c) 30 Nm  (d) 3000 Nm  (e) 30,000 Nm.

Last Answer : Answer : b

The colored bands for a 4,700 ohm resistor with a ten percent tolerance are?

Description : The colored bands for a 4,700 ohm resistor with a ten percent tolerance are? A.yellow, violet, red, gold B.yellow, violet, orange, gold C.yellow, violet, red, silver D.orange, violet, red, silver

Last Answer : The colored bands for a 4,700 ohm resistor with a ten percent tolerance are? A.yellow, violet, red, gold B.yellow, violet, orange, gold C.yellow, violet, red, silver D.orange, violet, red, silver

A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network ? (A) 2 Mbps (B) 60 Mbps (C) 120 Mbps (D) 10 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network ? (A) 2 Mbps (B) 60 Mbps (C) 120 Mbps (D) 10 Mbps

Last Answer : (A) 2 Mbps Explanation: In data transmission, throughput is the amount of data moved successfully from one place to another in a given period of time, and typically measured in bits per second (bps), ... second (Mbps) or gigabits per second (Gbps). Here, Throughput = 15000 x 8000/60 = 2 Mbps 

A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? (A) 1 Mbps (B) 2 Mbps (C) 10 Mbps (D) 12 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? (A) 1 Mbps (B) 2 Mbps (C) 10 Mbps (D) 12 Mbps

Last Answer : (B) 2 Mbps

Pulse – amplitude modulation signals are multiplexed by using

Description : Pulse – amplitude modulation signals are multiplexed by using

Last Answer : FET switches

An FDM hierarchy which is formed by frequency – division multiplexing five groups containing 12 channels each for a combined bandwidth of 240 kHz

Description : An FDM hierarchy which is formed by frequency – division multiplexing five groups containing 12 channels each for a combined bandwidth of 240 kHz

Last Answer : Supergroup

A piezo-electric type pressure sensor has a sensitivity of 1 mV/kPa and a bandwidth of 300 Hz to 300 kHz.

Description : A piezo-electric type pressure sensor has a sensitivity of 1 mV/kPa and a bandwidth of 300 Hz to 300 kHz. For a constant (dc) pressure of 100 kPa, the steady state output of the sensor in millivolt is (A) 0 (B) 2 (C) 4 (D) 6

Last Answer : A piezo-electric type pressure sensor has a sensitivity of 1 mV/kPa and a bandwidth of 300 Hz to 300 kHz. For a constant (dc) pressure of 100 kPa, the steady state output of the sensor in millivolt is 0

Consider a discrete memoryless channel and assume that H(x) is the amount of information per symbol at the input of the channel; H(y) is the amount of information per symbol at the output of the channel; H(x|y) is the amount of uncertainty remaining on x knowing y; and I(x;y) is the information transmission. Which of the following does not define the channel capacity of a discrete memoryless channel?

Description : Consider a discrete memoryless channel and assume that H(x) is the amount of information per symbol at the input of the channel; H(y) is the amount of information per symbol at the output of the channel; H(x|y) is the amount of uncertainty ... (H(x) - H(x|y))]  p(x) (D) max H(x|y)  p(x)

Last Answer : (D) max H(x|y)   p(x)

The number of function points of a proposed system is calculated as 500. Suppose that the system is planned to be developed in Java and the LOC/FP ratio of Java is 50. Estimate the effort (E) required to complete the project using the effort formula of basic COCOMO given below: E = a(KLOC)b Assume that the values of a and b are 2.5 and 1.0 respectively. (A) 25 person months (B) 75 person months (C) 62.5 person months (D) 72.5 person months

Description : The number of function points of a proposed system is calculated as 500. Suppose that the system is planned to be developed in Java and the LOC/FP ratio of Java is 50. Estimate the effort (E) required to ... ) 25 person months (B) 75 person months (C) 62.5 person months (D) 72.5 person months

Last Answer : (C) 62.5 person months 

____ system transmits frequency-division-multiplexed voice band signals over a coaxial cable for distances up to 4000 miles. A. T carrier B. X carrier C. L carrier D. F carrier

Description : ____ system transmits frequency-division-multiplexed voice band signals over a coaxial cable for distances up to 4000 miles. A. T carrier B. X carrier C. L carrier D. F carrier

Last Answer : C. L carrier

Analog signals can be ________by combining them with a carrier frequency (A) Carried (B) Transported (C) Multiplexed (D) Mixed

Description : Analog signals can be ________by combining them with a carrier frequency (A) Carried (B) Transported (C) Multiplexed (D) Mixed

Last Answer : (C) Multiplexed

A UNIX file system has 1 KB block size and 4-byte disk addresses. What is the maximum file size if the inode contains ten direct block entries, one single indirect block entry, one double indirect block entry and one triple indirect block entry? (A) 30 GB (B) 64 GB (C) 16 GB (D) 1 GB

Description : A UNIX file system has 1 KB block size and 4-byte disk addresses. What is the maximum file size if the inode contains ten direct block entries, one single indirect block entry, one double indirect block entry and one triple indirect block entry? (A) 30 GB (B) 64 GB (C) 16 GB (D) 1 GB

Last Answer : (C) 16 GB

To the nearest rupee, what is the net present value of a replacement project whose cash flows are -Rs.104,000; Rs.34,444; Rs.39,877; Rs.25,000; and Rs.52,800 for years 0 through 4, respectively? The firm has decided to assume that the appropriate cost of capital is 10% and the appropriate risk-free rate is 6%. A. Rs.15,115 B. Rs.26,798 C. Rs.33,346 D. Rs.48,121

Description : To the nearest rupee, what is the net present value of a replacement project whose cash flows are -Rs.104,000; Rs.34,444; Rs.39,877; Rs.25,000; and Rs.52,800 for years 0 through 4, respectively? The firm has decided to ... -free rate is 6%. A. Rs.15,115 B. Rs.26,798 C. Rs.33,346 D. Rs.48,121

Last Answer : C. Rs.33,346

Demodulation is the process of A. converting digital signals toanalog signals B. converting analogsignals todigital signals C. combining many low speed channels into onehigh speed channel D. dividing the high-speed signals into frequency bands E. None of the above

Description : Demodulation is the process of A. converting digital signals toanalog signals B. converting analogsignals todigital signals C. combining many low speed channels into onehigh speed channel D. dividing the high-speed signals into frequency bands E. None of the above

Last Answer : converting analogsignals todigital signals

Given two jugs of capacities 5 litres and 3 litres with no measuring markers on them. Assume that there is endless supply of water. Then the minimum number of states to measure 4 litres water will be (A) 3 (B) 4 (C) 5 (D) 7

Description : Given two jugs of capacities 5 litres and 3 litres with no measuring markers on them. Assume that there is endless supply of water. Then the minimum number of states to measure 4 litres water will be (A) 3 (B) 4 (C) 5 (D) 7

Last Answer : (D) 7

A single phase transformer rated at 3000 kVA, 69 kV 4.16 kV, 60 Hz has a total internal impedance Zp of 127...

Description : A single phase transformer rated at 3000 kVA, 69 kV 4.16 kV, 60 Hz has a total internal impedance Zp of 127 ohm, referred to the primary side. Calculate the primary current if the secondary is accidentally short circuited.  (A) 43.5 A (B) 543 A (C) 9006 A (D) 721 A 

Last Answer : 543A

A client-server system uses a satellite network, with the satellite at a height of 40,000 kms. What is the best-case delay in response to a request? (Note that the speed of light in air is 3,00,000 km/second). (A) 133.33 m sec (B) 266.67 m sec (C) 400.00 m sec (D) 533.33 m sec

Description : A client-server system uses a satellite network, with the satellite at a height of 40,000 kms. What is the best-case delay in response to a request? (Note that the speed of light in air is 3,00,000 km/second). (A) 133.33 m sec (B) 266.67 m sec (C) 400.00 m sec (D) 533.33 m sec

Last Answer : (D) 533.33 m sec Explanation: The request has to go up and down, and the response has to go up and down. The total path length traversed is thus 160.000 km. The speed of light in air and vacuum is 300,000 km/sec, so the propagation delay alone is 160,000/300,000 sec or about 533 msec. 

What is the channel spacing for SITOR frequencies? A. 500 Hz B. 170 Hz C. 300 Hz D. 3 kHz

Description : What is the channel spacing for SITOR frequencies? A. 500 Hz B. 170 Hz C. 300 Hz D. 3 kHz

Last Answer : A. 500 Hz

A unix file system has 1-KB blocks and 4-byte disk addresses. What is the maximum file size if i-nodes contain 10 direct entries and one single, double and triple indirect entry each? (A) 32 GB (B) 64 GB (C) 16 GB (D) 1 GB

Description : A unix file system has 1-KB blocks and 4-byte disk addresses. What is the maximum file size if i-nodes contain 10 direct entries and one single, double and triple indirect entry each? (A) 32 GB (B) 64 GB (C) 16 GB (D) 1 GB

Last Answer : (C) 16 GB

A dynamic RAM has refresh cycle of 32 times per msec. Each refresh operation requires 100 nsec and a memory cycle requires 250 nsec. What percentage of memory’s total operating time is required for refreshes? (A) 0.64 (B) 0.96 (C) 2.00 (D) 0.32

Description : A dynamic RAM has refresh cycle of 32 times per msec. Each refresh operation requires 100 nsec and a memory cycle requires 250 nsec. What percentage of memory’s total operating time is required for refreshes? (A) 0.64 (B) 0.96 (C) 2.00 (D) 0.32

Last Answer : Answer: D Explanation: in 1ms : refresh = 32 times Memory cycle = 1ms/250ns = 106ns/250ns = 4000 times Therefore, % of refresh time = (32 x 100ns)/(4000 x 250ns) = 3200ns/1000000 x 100% = 0.32%

Assume a frequency range of 401.000 MHz to 401.050 MHz, if you apply 25 kHz channeling plan, determine the center frequency of the first channel from the lower limit. A. 401.010 MHz B. 401.0125 MHz C. 401.025 MHz D. 401.00625 MHz

Description : Assume a frequency range of 401.000 MHz to 401.050 MHz, if you apply 25 kHz channeling plan, determine the center frequency of the first channel from the lower limit. A. 401.010 MHz B. 401.0125 MHz C. 401.025 MHz D. 401.00625 MHz

Last Answer : B. 401.0125 MHz

If an integer occupies 4 bytes and a character occupies 1 byte of memory, each element of the following structure would occupy how many bytes ? struct name { int age; char name[30]; }; A) 30 B) 32 C) 34 D) 36

Description : If an integer occupies 4 bytes and a character occupies 1 byte of memory, each element of the following structure would occupy how many bytes ? struct name { int age; char name[30]; }; A) 30 B) 32 C) 34 D) 36

Last Answer : C) 34

Let E1 and E2 be two entities in E-R diagram with simple single valued attributes. R1 and R2 are two relationships between E1 and E2 where R1 is one-many and R2 is many-many. R1 and R2 do not have any attributes of their own. How many minimum number of tables are required to represent this situation in the Relational Model? (A) 4 (B) 3 (C) 2 (D) 1

Description : Let E1 and E2 be two entities in E-R diagram with simple single valued attributes. R1 and R2 are two relationships between E1 and E2 where R1 is one-many and R2 is many-many. R1 and R2 do not have any ... are required to represent this situation in the Relational Model? (A) 4 (B) 3 (C) 2 (D) 1

Last Answer : (B) 3 

Let M and N be two entities in an E-R diagram with simple single vale attributes. R1 and R2 are two relationship between M and N, whereas R1 is one-to-many and R2 is many-to-many. The minimum number of tables required to represent M, N, R1 and R2 in the relational model are .......... (1) 4 (2) 6 (3) 7 (4) 3

Description : Let M and N be two entities in an E-R diagram with simple single vale attributes. R1 and R2 are two relationship between M and N, whereas R1 is one-to-many and R2 is many-to-many. The minimum number of tables required to ... and R2 in the relational model are .......... (1) 4 (2) 6 (3) 7 (4) 3

Last Answer : Answer: 4

Air enters an adiabatic compressor at 300K. The exit temperature for a compression ratio of 3, assuming air to be an ideal gas (Y = Cp/Cv = 7/5) and the process to be reversible, is (A) 300 × (32/7) (B) 300 × (33/5) (C) 300 × (333/7) (D) 300 × (35/7)

Description : Air enters an adiabatic compressor at 300K. The exit temperature for a compression ratio of 3, assuming air to be an ideal gas (Y = Cp/Cv = 7/5) and the process to be reversible, is (A) 300 × (32/7) (B) 300 × (33/5) (C) 300 × (333/7) (D) 300 × (35/7)

Last Answer : A) 300 × (32/7)

_____ isan analog multiplexing technique to combine optical signals. A) FDM B) TDM C) WDM D) None of the above

Description : _____ isan analog multiplexing technique to combine optical signals. A) FDM B) TDM C) WDM D) None of the above

Last Answer : WDM

Which multiplexing technique involves signals composed of light beams? A) FDM B) TDM C) WDM D) none of the above

Description : Which multiplexing technique involves signals composed of light beams? A) FDM B) TDM C) WDM D) none of the above

Last Answer : WDM

Which multiplexing technique transmits digital signals? A) FDM B) TDM C) WDM D) None of the above

Description : Which multiplexing technique transmits digital signals? A) FDM B) TDM C) WDM D) None of the above

Last Answer : TDM

Which multiplexing technique transmits analog signals? A) FDM B) TDM C) WDM D) (a) and (c)

Description : Which multiplexing technique transmits analog signals? A) FDM B) TDM C) WDM D) (a) and (c)

Last Answer : (a) and (c)

What will be the output? numberGames = {} numberGames[(1,2,4)] = 8 numberGames[(4,2,1)] = 10 numberGames[(1,2)] = 12 sum = 0 for k in numberGames: sum += numberGames[k] print len(numberGames) + sum Page No 36 a) 30 b) 24 c) 33 d) 12

Description : What will be the output? numberGames = {} numberGames[(1,2,4)] = 8 numberGames[(4,2,1)] = 10 numberGames[(1,2)] = 12 sum = 0 for k in numberGames: sum += numberGames[k] print len(numberGames) + sum Page No 36 a) 30 b) 24 c) 33 d) 12

Last Answer : a) 30

The band of frequencies least susceptible to atmospheric noise and interference is: A. 30 – 300 kHz B. 300 – 3000 kHz C. 3 – 30 MHz D. 300 – 3000 MHz

Description : The band of frequencies least susceptible to atmospheric noise and interference is: A. 30 – 300 kHz B. 300 – 3000 kHz C. 3 – 30 MHz D. 300 – 3000 MHz

Last Answer : D. 300 – 3000 MHz

.The grating used to observe, diffraction of visible light can have approximately __________. A.300 lines per cm B.3000 lines per cm, C. 15000 lines per cm D. 30 lines per cm

Description : .The grating used to observe, diffraction of visible light can have approximately __________. A.300 lines per cm B.3000 lines per cm, C. 15000 lines per cm D. 30 lines per cm

Last Answer : C. 15000 lines per cm

Number of weed species identified in the world a). 30 b). 300 c). 3000 d). 30000

Description : Number of weed species identified in the world a). 30 b). 300 c). 3000 d). 30000

Last Answer : d). 30000

What is a typical wavelength of an AM radio wave? w) 3000 meters x) 300 meters y) 30 meters z) 3 meters

Description : What is a typical wavelength of an AM radio wave? w) 3000 meters x) 300 meters y) 30 meters z) 3 meters

Last Answer : ANSWER: X -- 300 METERS

How wide is the spectrum bandwidth of a single GSM carrier? A. 100 kHz B. 200 kHz C. 50 kHz D. 16 kHz

Description : How wide is the spectrum bandwidth of a single GSM carrier? A. 100 kHz B. 200 kHz C. 50 kHz D. 16 kHz

Last Answer : B. 200 kHz

Consider a disk queue with request for input/output to block on cylinders 98, 183, 37, 122, 14, 124, 65, 67 in that order. Assume that disk head is initially positioned at cylinder 53 and moving towards cylinder number 0. The total number of head movements using Shortest Seek Time First (SSTF) and SCAN algorithms are respectively (A) 236 and 252 cylinders (B) 640 and 236 cylinders (C) 235 and 640 cylinders (D) 235 and 252 cylinders

Description : Consider a disk queue with request for input/output to block on cylinders  98, 183, 37, 122, 14, 124, 65, 67  in that order. Assume that disk head is initially positioned at cylinder 53 and moving ... and 252 cylinders (B) 640 and 236 cylinders (C) 235 and 640 cylinders (D) 235 and 252 cylinders

Last Answer : Answer: 236 and 208 cylinders Explanation: SSTF Initial head position =53 The closest queue to initial head position=65 head moves from 53 to 65=12 head moves from 65 to 67=2 head moves from 67 ... 122=24 head moves from 122 to 124=2 head moves from 124 to 183=59 Total head movement=208 

Let us assume that you construct ordered tree to represent the compound proposition (~(p˄q))↔(~p˅~q). Then, the prefix expression and post-fix expression determined using this ordered tree are given as ........... and ............. respectively. (A) ↔~˄pq˅ ~~pq, pq˄~p~q~˅↔ (B) ↔~˄pq˅ ~p~q, pq˄~p~q~˅↔ (C) ↔~˄pq˅ ~~pq, pq˄~p~ ~q˅↔ (D) ↔~˄pq˅ ~p~q, pq˄~p~~q˅↔

Description : Let us assume that you construct ordered tree to represent the compound proposition (~(p˄q))↔(~p˅~q). Then, the prefix expression and post-fix expression determined using this ordered tree are given as ........... and .......... ... ~p~q~˅↔ (C) ↔~˄pq˅ ~~pq, pq˄~p~ ~q˅↔ (D) ↔~˄pq˅ ~p~q, pq˄~p~~q˅↔

Last Answer : (B) ↔~˄pq˅ ~p~q, pq˄~p~q~˅↔

Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)? a. 200 hPa b. 700 hPa c. 500 hPa d. 300 hPa

Description : Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)?  a. 200 hPa  b. 700 hPa  c. 500 hPa  d. 300 hPa

Last Answer : d. 300 hPa

Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)? a. 200 hPa b. 700 hPa c. 500 hPa d. 300 hPa

Description : Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)? a. 200 hPa b. 700 hPa c. 500 hPa d. 300 hPa

Last Answer : d. 300 hPa