An aeroplane of 110,000kg has its CG at 22.6m aft of the datum. The CG limits are 18m to 22m aft of the datum. How much mass must be removed from a hold 30m aft of the datum to bring the CG to its mid point? a. 26,800 kg b. 28,600 kg c. 86,200 kg d. 62,800 kg

An aeroplane of 110,000kg has its CG at 22.6m aft of the datum. The CG limits are 18m to
22m aft of the datum. How much mass must be removed from a hold 30m aft of the datum to
bring the CG to its mid point?
a. 26,800 kg
b. 28,600 kg
c. 86,200 kg
d. 62,800 kg
by

1 Answer

Answer :

b. 28,600 kg
by

Related questions

An aeroplane of 110,000kg has its CG at 22.6m aft of the datum. The CG limits are 18m to 22m aft of the datum. How much mass must be removed from a hold 30m aft of the datum to bring the CG to its mid point? a. 26,800 kg b. 28,600 kg c. 86,200 kg d. 62,800 kg

Description : An aeroplane of 110,000kg has its CG at 22.6m aft of the datum. The CG limits are 18m to 22m aft of the datum. How much mass must be removed from a hold 30m aft of the datum to bring the CG to its mid point? a. 26,800 kg b. 28,600 kg c. 86,200 kg d. 62,800 kg

Last Answer : b. 28,600 kg

The CG is found to be 652.5 inches aft of the datum.. What percentage is the CG to the MAC?

Description : The CG is found to be 652.5 inches aft of the datum.. What percentage is the CG to the MAC?

Last Answer : 20%

To ensure some degree of longitudinal stability in flight, the position of the CG: a. Must always coincide with the AC b. Must be forward of the Neutral Point c. Must be aft of the Neutral Point d. Must not be forward of the aft CG limi

Description : To ensure some degree of longitudinal stability in flight, the position of the CG: a. Must always coincide with the AC b. Must be forward of the Neutral Point c. Must be aft of the Neutral Point d. Must not be forward of the aft CG limi

Last Answer : b. Must be forward of the Neutral Point

How is fuel consumption affect by the C of G position, in terms of ANM/kg? a. Increases with a forward C of G b. Decreases with an aft C of G c. Decreases with a forward C of G d. Fuel consumption is not affected by the C of G position

Description : How is fuel consumption affect by the C of G position, in terms of ANM/kg? a. Increases with a forward C of G b. Decreases with an aft C of G c. Decreases with a forward C of G d. Fuel consumption is not affected by the C of G position

Last Answer : c. Decreases with a forward C of G

Refer to CAP697 MRJT1 Fig. 4.3.6 Given: Distance to alternate 400nm Landing mass at alternate 50,000kg Headwind component 25kt The alternate fuel required is: a. 2550kg b. 2800kg c. 2900kg d. 2650kg

Description : Refer to CAP697 MRJT1 Fig. 4.3.6 Given: Distance to alternate 400nm Landing mass at alternate 50,000kg Headwind component 25kt The alternate fuel required is: a. 2550kg b. 2800kg c. 2900kg d. 2650kg

Last Answer : b. 2800kg

Refer to CAP697 MRJT1 Fig. 4.2 & 4.5.3.2 Estimated take-off mass 57,000kg; ground distance 150nm; temperature ISA -10C; cruise at M0.74. What is the optimum cruise altitude and TAS? a. 25,000ft & 445kt b. 33,000ft & 420kt c. 25,000ft & 435kt d. 33,000ft & 430kt

Description : Refer to CAP697 MRJT1 Fig. 4.2 & 4.5.3.2 Estimated take-off mass 57,000kg; ground distance 150nm; temperature ISA -10C; cruise at M0.74. What is the optimum cruise altitude and TAS? a. 25,000ft & 445kt b. 33,000ft & 420kt c. 25,000ft & 435kt d. 33,000ft & 430kt

Last Answer : c. 25,000ft & 435kt

The mass of 2.5 m3 of a certain liquid is 2 tonnes. Its mass density is (A) 200 kg/m3 (B) 400 kg/m3 (C) 600 kg/m3 (D) 800 kg/m

Description : The mass of 2.5 m3 of a certain liquid is 2 tonnes. Its mass density is (A) 200 kg/m3 (B) 400 kg/m3 (C) 600 kg/m3 (D) 800 kg/m

Last Answer : Answer: Option D

The 28 days cube strength of mass concrete using aggregates of maximum size 5 cm for gravity dams should be (A) Between 150 to 300 kg/cm2 (B) Between 350 to 600 kg/cm2 (C) Between 150 to 500 kg/cm2 (D) Below 200 kg/cm2

Description : The 28 days cube strength of mass concrete using aggregates of maximum size 5 cm for gravity dams should be (A) Between 150 to 300 kg/cm2 (B) Between 350 to 600 kg/cm2 (C) Between 150 to 500 kg/cm2 (D) Below 200 kg/cm2

Last Answer : Answer: Option D

Two trains starting at the same time from two stations 200 km apart and going in opposite directions cross each other at a distance of 110 km from one of the stations. What is the ratio of their speeds? A.9 : 28 B.11 : 9 C.11 : 8 D.9 : 22 E.None of these

Description : Two trains starting at the same time from two stations 200 km apart and going in opposite directions cross each other at a distance of 110 km from one of the stations. What is the ratio of their speeds? A.9 : 28 B.11 : 9 C.11 : 8 D.9 : 22 E.None of these

Last Answer : Answer – B (11 : 9) Explanation – In the same time, they cover 110 km and 90 km respectively.Ratio of their speeds = 110 : 90 = 11 : 9 

An aeroplane is starting a non-precision approach with an MDH of 250ft and minimum visibility of 800 meters. ATC gives threshold, mid-runway and final third RVRs. When may the approach be started? a. When threshold and mid-runway RVRs are greater than 800m b. When all 3 RVRs are greater than 800m c. When the met viz is greater than 800m. RVR is for precision approaches only. d. When threshold RVR is greater than 800m

Description : An aeroplane is starting a non-precision approach with an MDH of 250ft and minimum visibility of 800 meters. ATC gives threshold, mid-runway and final third RVRs. When may the approach be started? ... than 800m. RVR is for precision approaches only. d. When threshold RVR is greater than 800m

Last Answer : d. When threshold RVR is greater than 800m

The daily water allowance for normal adult (60 kg) is about (A) 200–600 ml (B) 500–800 ml (C) 800–1500 ml (D) 1800–2500 ml

Description : The daily water allowance for normal adult (60 kg) is about (A) 200–600 ml (B) 500–800 ml (C) 800–1500 ml (D) 1800–2500 ml

Last Answer : Answer : D

For a turbojet aeroplane the third segment of climb begins when:

Description : For a turbojet aeroplane the third segment of climb begins when:

Last Answer : Acceleration to a flap retraction speed begins (min 400ft)

For a turbojet aeroplane the second segment of the climb begins when:

Description : For a turbojet aeroplane the second segment of the climb begins when:

Last Answer : Landing gear is fully retracted

A DISTRESS message differs from an URGENCY message because: a. There is grave and imminent danger which requires immediate assistance b. The aeroplane has suffered damage that endangers the ability to fly c. The aeroplane will not be able to reach a suitable aerodrome d. The situation concerns the safety of passengers on board or within sight

Description : A DISTRESS message differs from an URGENCY message because: a. There is grave and imminent danger which requires immediate assistance b. The aeroplane has suffered damage that endangers the ability ... suitable aerodrome d. The situation concerns the safety of passengers on board or within sight

Last Answer : a. There is grave and imminent danger which requires immediate assistance

The vertical spacing between ties must be no more than? a. 8m (26 feet) b. 10m (33 feet) c. 12m (39 feet) d. 6m (20 feet)

Description : The vertical spacing between ties must be no more than? a. 8m (26 feet) b. 10m (33 feet) c. 12m (39 feet) d. 6m (20 feet)

Last Answer : a. 8m (26 feet)

What are the VMC limits for Class B airspace? a. 8km flight visibility, clear of cloud and in sight of the surface b. 8km flight visibility, 1000ft vertically and 1500m horizontally from cloud c. 5km flight visibility, 1000ft vertically and 1500m horizontally from cloud d. The same as Class D

Description : What are the VMC limits for Class B airspace? a. 8km flight visibility, clear of cloud and in sight of the surface b. 8km flight visibility, 1000ft vertically and 1500m horizontally from cloud c. 5km flight visibility, 1000ft vertically and 1500m horizontally from cloud d. The same as Class D

Last Answer : d. The same as Class D

A nose wheel control system a. Prevents the nosewheel from castering at all times b. Allows the nosewheel to caster within preset limits about the neutral position c. Allows the nosewheel to caster freely at all times d. Prevents the nose gear from lowering if the nosewheels are not centralised

Description : A nose wheel control system a. Prevents the nosewheel from castering at all times b. Allows the nosewheel to caster within preset limits about the neutral position c. Allows the nosewheel to caster freely at all times d. Prevents the nose gear from lowering if the nosewheels are not centralised

Last Answer : b. Allows the nosewheel to caster within preset limits about the neutral position

When would the negative differential limits be reached/exceeded? a. Rapid descent when AC descends below cabin altitude b. During ground pressure testing c. Rapid ascent when aircraft climbs d. When changing to manual operation

Description : When would the negative differential limits be reached/exceeded? a. Rapid descent when AC descends below cabin altitude b. During ground pressure testing c. Rapid ascent when aircraft climbs d. When changing to manual operation

Last Answer : a. Rapid descent when AC descends below cabin altitude

A gun barrel of mass 600 Kg has a recoil spring of stiffness 294 KN/m. If the barrel recoils 1.3 m on firing, what will be the initial recoil velocity of the barrel? (A) 28.77 m/s (B) 32.77 m/s (C) 35.77 m/s (D) 40.77 m/s

Description : A gun barrel of mass 600 Kg has a recoil spring of stiffness 294 KN/m. If the barrel recoils 1.3 m on firing, what will be the initial recoil velocity of the barrel? (A) 28.77 m/s (B) 32.77 m/s (C) 35.77 m/s (D) 40.77 m/s

Last Answer : (A) 28.77 m/s

What is 600 cg to g?

Description : What is 600 cg to g?

Last Answer : Need answer

An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Description : An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Last Answer : a. 500 ft/min

Given: True track 215; mountain elevation 11,600 ft; local airfield gives qnh as 1035 mb; Required terrain clearance 1500 ft; temparute ISA-15C Which of the following is the minimum flight level considering the temperature?

Description : Given: True track 215; mountain elevation 11,600 ft; local airfield gives qnh as 1035 mb; Required terrain clearance 1500 ft; temparute ISA-15C Which of the following is the minimum flight level considering the temperature?

Last Answer : FL140

The ratio of the monthly salaries of A and B is in the ratio 15 : 16 and that of B and C is in the ratio 17 : 18. Find the monthly income of C if the total of their monthly salary is Rs 1,87,450. A) Rs 66,240 B) Rs 72,100 C) Rs 62,200 D) Rs 65,800 E) Rs 60,300

Description : The ratio of the monthly salaries of A and B is in the ratio 15 : 16 and that of B and C is in the ratio 17 : 18. Find the monthly income of C if the total of their monthly salary is Rs 1,87,450. A) Rs 66,240 B) Rs 72,100 C) Rs 62,200 D) Rs 65,800 E) Rs 60,300

Last Answer : Answer: A A/B = 15/16 and B/C = 17*18 So A : B : C = 15*17 : 16*17 : 16*18 = 255 : 272 : 288 So C’s salary = [288/(255+272+288)] * 1,87,450= Rs 66,240

The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of 4 tonnes at the centre. The maximum stress in the bottom most fibre at the mid span section, is (A) 13.33 kg/cm2 tensile (B) 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Description : The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of ... 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Last Answer : (C) 26.67 kg/cm2 tensile

Is 62 even and 6M odd?

Description : Is 62 even and 6M odd?

Last Answer : 6M is odd because the number has a lot of questions because 62is even because the number can go up or down below zero.

The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left Side .045 - .047, Bottom .045 - .041 Which of the f A. both the aft and foward bearings should be replaced. B. Shims should be removed from the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Description : The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left ... the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Last Answer : Answer: A

The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END -AFT END, Top .045 - .049 , Right Side .045 - .047, Left Side .045 - .047 , Bottom .045 - .041 Which of the fo A. The aft bearing should be realigned or replaced. B. Shims should be removed from the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Description : The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END -AFT END, Top .045 - .049 , Right Side .045 - .047, Left ... the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Last Answer : Answer: A

A circular solid of uniform thickness 20 mm, radius 200 mm and mass 20 kg, is used as a flywheel. If it rotates at 600 rpm, the kinetic energy of the flywheel, in joules is 1. 395 2. 790 3. 1580 4. 3160

Description : A circular solid of uniform thickness 20 mm, radius 200 mm and mass 20 kg, is used as a flywheel. If it rotates at 600 rpm, the kinetic energy of the flywheel, in joules is 1. 395 2. 790 3. 1580 4. 3160

Last Answer : 2. 790

BIRMINGHAM EGBB/BHX SA0850 280850 18014kt 9999 SCT024 BKN030 BKN045 12/08 Q1011 = FC0600 280600Z 280816 190015G27kt 9999 BKN025 TEMPO 0812 5000 – DZ BKN012 BECMG 1214 19022G37 = FT0400 280434Z 281212 19022G37 9999 BKN025 TEMPO 1902 5000 RA BKN010 BECMG 2201 25007kt Refer to weather information for Birmingham above. What is the total time for which the weather is forecast? a. 9 hours b. 18 hours c. 24 hours d. 28 hours

Description : BIRMINGHAM EGBB/BHX SA0850 280850 18014kt 9999 SCT024 BKN030 BKN045 12/08 Q1011 = FC0600 280600Z 280816 190015G27kt 9999 BKN025 TEMPO 0812 5000 - DZ BKN012 BECMG 1214 19022G37 = FT0400 280434Z 281212 19022G37 9999 ... weather is forecast? a. 9 hours b. 18 hours c. 24 hours d. 28 hours

Last Answer : d. 28 hours

What is the assessed GMT service life of 60 kg 90 UTS rail? a. 650 GMT b. 600 GMT c. 800 GMT* d. 500 GMT

Description : What is the assessed GMT service life of 60 kg 90 UTS rail? a. 650 GMT b. 600 GMT c. 800 GMT* d. 500 GMT

Last Answer : c. 800 GMT*

Minimum excretory urinary volume for waste products elimination during 24 hrs is (A) 200–300 ml (B) 200–400 ml (C) 500–600 ml (D) 800 ml

Description : Minimum excretory urinary volume for waste products elimination during 24 hrs is (A) 200–300 ml (B) 200–400 ml (C) 500–600 ml (D) 800 ml

Last Answer : Answer : C

The daily requirement of calcium is (A) 200 mg (B) 400 mg (C) 800 mg (D) 600 mg

Description : The daily requirement of calcium is (A) 200 mg (B) 400 mg (C) 800 mg (D) 600 mg

Last Answer : Answer : C

The daily calcium requirement in pregnancy and lactation is about (A) 600 mg (B) 800 mg (C) 1,200 mg (D) 1,500 mg

Description : The daily calcium requirement in pregnancy and lactation is about (A) 600 mg (B) 800 mg (C) 1,200 mg (D) 1,500 mg

Last Answer : Answer : C

Number of meiotic divisions required to produce 200/400 seeds of pea would be (a) 200/400 (b) 400/800 (c) 300/600 (d) 250/500

Description : Number of meiotic divisions required to produce 200/400 seeds of pea would be (a) 200/400 (b) 400/800 (c) 300/600 (d) 250/500

Last Answer : (d) 250/500.

Regeneration of molecular sieve requires it to be heated to a temperature of about __________ °C. (A) 80-120 (B) 200-300 (C) 600-800 (D) 1000-1100

Description : Regeneration of molecular sieve requires it to be heated to a temperature of about __________ °C. (A) 80-120 (B) 200-300 (C) 600-800 (D) 1000-1100

Last Answer : (D) 1000-1100

Capital employed is Rs.50,000 Trading Profit amounted Rs.12,200, Rs.15,000 and Rs.2000 loss for 2016, 2017 and 2018 respectively. Rate of interest is 8% and the rate of risk is 2% Remuneration from alternative employment of the proprietor is Rs.3,600 pa. Amount of Goodwill at 3 years. purchase of super Profit is A Rs.8,000 B Rs.8,800 C Rs.8,850 D Rs.9,500 ANS: Rs.8,850

Description : Capital employed is Rs.50,000 Trading Profit amounted Rs.12,200, Rs.15,000 and Rs.2000 loss for 2016, 2017 and 2018 respectively. Rate of interest is 8% and the rate of risk is 2% Remuneration from alternative employment of the ... A Rs.8,000 B Rs.8,800 C Rs.8,850 D Rs.9,500 ANS: Rs.8,850

Last Answer : A

1000 kg of wet solids are to be dried from 60% to 20% moisture (by weight). The mass of moisture removed in kg is (A) 520 (B) 200(C) 400 (D) 500

Description : 1000 kg of wet solids are to be dried from 60% to 20% moisture (by weight). The mass of moisture removed in kg is (A) 520 (B) 200 (C) 400 (D) 500

Last Answer : (C) 400

Which is bigger 3000 mg 250 cg or 3 kg?

Description : Which is bigger 3000 mg 250 cg or 3 kg?

Last Answer : 3000mg

How is fuel consumption affect by the C of G position, in terms of ANM/kg? a. Increases with a forward C of G b. Decreases with an aft C of G c. Decreases with a forward C of G d. Fuel consumption is not affected by the C of G position

Description : How is fuel consumption affect by the C of G position, in terms of ANM/kg? a. Increases with a forward C of G b. Decreases with an aft C of G c. Decreases with a forward C of G d. Fuel consumption is not affected by the C of G position

Last Answer : c. Decreases with a forward C of G

CG Co manufactures a single product T. Budgeted production output of product T during June is 200 units. Each unit of product T requires 6 labour hours for completion and CG Co anticipates 20 per cent idle time. Labour is paid at a rate of Rs7 per hour. The direct labour cost budget for March is (a) Rs 6,720 (b) 8,400 (c) 10,080 (d) 10,500

Description : CG Co manufactures a single product T. Budgeted production output of product T during June is  200 units. Each unit of product T requires 6 labour hours for completion and CG Co anticipates 20 per  cent idle time. Labour is paid at ... for March is (a) Rs 6,720 (b) 8,400 (c) 10,080 (d) 10,500

Last Answer : (d) 10,500

The correct reply to the instruction “HOLD SHORT AT RUNWAY” is:

Description : The correct reply to the instruction “HOLD SHORT AT RUNWAY” is:

Last Answer : HOLDING SHORT

Following a communication failure the time at which aircraft should aim to leave the hold is:

Description : Following a communication failure the time at which aircraft should aim to leave the hold is:

Last Answer : EAT or ETA

The correct reply to the instruction “HOLD SHORT AT RUNWAY” is: a. WILCO b. ROGER c. HOLDING SHORT d. UNDERSTOOD

Description : The correct reply to the instruction “HOLD SHORT AT RUNWAY” is: a. WILCO b. ROGER c. HOLDING SHORT d. UNDERSTOOD

Last Answer : c. HOLDING SHORT

The definition of the phrase “STANDBY” is: a. Consider the transmission as not sent b. Proceed with your message c. Wait and I will call you d. Hold your present position

Description : The definition of the phrase “STANDBY” is: a. Consider the transmission as not sent b. Proceed with your message c. Wait and I will call you d. Hold your present position

Last Answer : c. Wait and I will call you

Following a communications failure, the time at which the aircraft should aim to leave the hold is: a. Within 10 minutes of the EAT or ETA b. Within 30 minutes of the EAT or ETA c. EAT or ETA d. Before it runs out of fuel

Description : Following a communications failure, the time at which the aircraft should aim to leave the hold is: a. Within 10 minutes of the EAT or ETA b. Within 30 minutes of the EAT or ETA c. EAT or ETA d. Before it runs out of fuel

Last Answer : c. EAT or ETA

How is fuel consumption affected by the C of G position, in terms of ANM/kg?

Description : How is fuel consumption affected by the C of G position, in terms of ANM/kg?

Last Answer : decreases with a forward C of G

Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)? a. 200 hPa b. 700 hPa c. 500 hPa d. 300 hPa

Description : Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)?  a. 200 hPa  b. 700 hPa  c. 500 hPa  d. 300 hPa

Last Answer : d. 300 hPa

You are cruising at FL 200, OAT is -40°C, sea level pressure is 1033 hPa. Calculate the true altitude. a. 20,660 ft b. 21,740 ft c. 18,260 ft d. 19, 340 ft

Description : You are cruising at FL 200, OAT is -40°C, sea level pressure is 1033 hPa. Calculate the true  altitude.  a. 20,660 ft  b. 21,740 ft  c. 18,260 ft  d. 19, 340 ft

Last Answer : d. 19, 340 ft

Orbital radius of GPS satellites is approximately: (A) 15,200 km (B) 26,600 km (C) 18,400 km (D) 36,000 km

Description : Orbital radius of GPS satellites is approximately: (A) 15,200 km (B) 26,600 km (C) 18,400 km (D) 36,000 km

Last Answer : Answer: Option B