The magnetism left in the iron after exciting field has been removed is known as (a) permeance (b) residual magnetism (c) susceptance (d) reluctance

The magnetism left in the iron after
exciting field has been removed is known
as
(a) permeance
(b) residual magnetism
(c) susceptance
(d) reluctance
by

1 Answer

Answer :

(b) residual magnetism
by

Related questions

The magnetism left in the iron after exciting field has been removed is known as

Last Answer : The magnetism left in the iron after exciting field has been removed is known as residual magnetism.

In the left hand rule, forefinger always represents (a) voltage (b) current (c) magnetic field (d) direction of force on the conductor

Description : In the left hand rule, forefinger always represents (a) voltage (b) current (c) magnetic field (d) direction of force on the conductor

Last Answer : (c) magnetic field

The working of a meter is based on the use of a permanent magnet. In order to protect the meter functioning from stray magnetic fields (a) meter is surrounded by strong magnetic fields (b) a soft iron shielding is used (c) a plastic shielding is provided (d) a shielding of anon-magnetic material is used

Description : The working of a meter is based on the use of a permanent magnet. In order to protect the meter functioning from stray magnetic fields (a) meter is surrounded by strong magnetic fields (b) a soft ... is used (c) a plastic shielding is provided (d) a shielding of anon-magnetic material is used

Last Answer : (b) a soft iron shielding is used

The range of wavelength values that a given photodiode will respond. ∙ A. spectral response ∙ B. permeance ∙ C. dark current ∙ D. reluctance

Description : The range of wavelength values that a given photodiode will respond. ∙ A. spectral response ∙ B. permeance ∙ C. dark current ∙ D. reluctance

Last Answer : A. spectral response

Define reluctance and permeance with respect to magnetic circuit.

Description : Define reluctance and permeance with respect to magnetic circuit.

Last Answer : Reluctance: The opposition offered by magnetic circuit to establish magnetic flux in it, is called as “Reluctance”.  Permeance: It is the reciprocal of reluctance and implies the magnetic core’s readiness with which magnetic flux is developed. 

Define the following terms: i) Magnetic flux density, ii) Reluctance, iii) Magneto-motive force, iv) Permeance.

Description : Define the following terms: i) Magnetic flux density, ii) Reluctance, iii) Magneto-motive force, iv) Permeance.

Last Answer : (i) Magnetic flux density (B): It is the magnetic flux per unit area measured at right angles to the flux path. (Its unit is weber/m2 or tesla).  (ii) Reluctance: It is the ... flux to set up through it and it is reciprocal of reluctance. Permeance = 1/ Reluctance. Unit: weber/ampere.

Which of the following is expected to have the maximum permeability ? (a) Brass (b) Copper (c) Zinc (d) Ebonite

Description : Which of the following is expected to have the maximum permeability ? (a) Brass (b) Copper (c) Zinc (d) Ebonite

Last Answer : (d) Ebonite

Which of the following is not a unit of flux? (a) Maxwell (b) Telsa (c) Weber (d) All of the above

Description : Which of the following is not a unit of flux? (a) Maxwell (b) Telsa (c) Weber (d) All of the above

Last Answer : (b) Telsa

Which of the following is the unit of magnetic flux density ? (a) weber (b) lumens (c) tesla (d) none of the above

Description : Which of the following is the unit of magnetic flux density ? (a) weber (b) lumens (c) tesla (d) none of the above

Last Answer : (c) tesla

The relative permeability is less than unity is case of (a) ferromagnetic materials (b) ferrites (c) non-ferrous materials (d) diamagnetic materials

Description : The relative permeability is less than unity is case of (a) ferromagnetic materials (b) ferrites (c) non-ferrous materials (d) diamagnetic materials

Last Answer : (d) diamagnetic materials

Reciprocal of permeability is (a) reluctivity (b) susceptibility (c) permittivity (d) conductance

Description : Reciprocal of permeability is (a) reluctivity (b) susceptibility (c) permittivity (d) conductance

Last Answer : (a) reluctivity

Gilbert is a unit of (a) electromotive force (6) magnetomotive force (c) conductance (d) permittivity

Description : Gilbert is a unit of (a) electromotive force (6) magnetomotive force (c) conductance (d) permittivity

Last Answer : (6) magnetomotive force

Ferrites are a sub-group of (a) non-magnetic materials (6) ferro-magnetic materials (c) paramagnetic materials (d) ferri-magnetic materials

Description : Ferrites are a sub-group of (a) non-magnetic materials (6) ferro-magnetic materials (c) paramagnetic materials (d) ferri-magnetic materials

Last Answer : (d) ferri-magnetic materials

Which of the following is a ferromagnetic material ? (a) Tungsten (b) Aluminium (c) Copper (d) Nickel

Description : Which of the following is a ferromagnetic material ? (a) Tungsten (b) Aluminium (c) Copper (d) Nickel

Last Answer : (d) Nickel

Two infinitely long parallel conductors in vacuum any separated 1 metre between centers >then a current of 1 ampere flows the. uk each conductor, produce on each other a force of (a) 2 x 1(T2 N/m) (b) 2 x KT3 N/m (c) 2 x 10"5 N/m (d) 2x 1(T7 N/m)

Description : Two infinitely long parallel conductors in vacuum any separated 1 metre between centers >then a current of 1 ampere flows the. uk each conductor, produce on each other a force of (a) 2 x 1(T2 N/m) (b) 2 x KT3 N/m (c) 2 x 10"5 N/m (d) 2x 1(T7 N/m)

Last Answer : (d) 2x 1(T7 N/m)

The substances which have a large number of free electrons and offer a low resistance are called (a) insulators (b) inductors (c) semi-conductors (d) conductors

Description : The substances which have a large number of free electrons and offer a low resistance are called (a) insulators (b) inductors (c) semi-conductors (d) conductors

Last Answer : (d) conductors

Electric pressure is also called (a) resistance (b) power (c) voltage (d) energy

Description : Electric pressure is also called (a) resistance (b) power (c) voltage (d) energy

Last Answer : (c) voltage

The S.I. unit of power is (a) Henry (b) coulomb (c) watt (d) watt-hour

Description : The S.I. unit of power is (a) Henry (b) coulomb (c) watt (d) watt-hour

Last Answer : (c) watt

Which of the methods listed is used to start a AC generator turning? A. Residual magnetism remaining in the field poles. B. Residual magnetism remaining in the field coils. C. Residual magnetism remaining in the armature. D. Rotation by a mechanical prime mover.

Description : Which of the methods listed is used to start a AC generator turning? A. Residual magnetism remaining in the field poles. B. Residual magnetism remaining in the field coils. C. Residual magnetism remaining in the armature. D. Rotation by a mechanical prime mover.

Last Answer : Answer: D

One of the generator bearing shells is generally insulated from the end housing in order to prevent _____________. A. rapid brush wear B. residual magnetism leak off C. excessive field winding heat D. circulation of shaft currents

Description : One of the generator bearing shells is generally insulated from the end housing in order to prevent _____________. A. rapid brush wear B. residual magnetism leak off C. excessive field winding heat D. circulation of shaft currents

Last Answer : Answer: D

Loss of or weak residual magnetism in an alternator or generator can be corrected for by _________________. A. running the rotor in the opposite direction for 5 minutes B. allowing the generator to run at 10% of normal speed for 5 minutes C. running the generator at normal speed with the field rheostat fully counterclockwise D. using a storage battery or battery charger to 'flash' the field

Description : Loss of or weak residual magnetism in an alternator or generator can be corrected for by _________________. A. running the rotor in the opposite direction for 5 minutes B. allowing the generator ... rheostat fully counterclockwise D. using a storage battery or battery charger to 'flash' the field

Last Answer : Answer: D

Voltage build up in an isolated induction generator depends on A. Capacitor bank value B. Residual magnetism of the rotor iron C. Residual magnetism of the stator iron a) A, B b) A, B, C c) B d) A, C

Description : Voltage build up in an isolated induction generator depends on A. Capacitor bank value B. Residual magnetism of the rotor iron C. Residual magnetism of the stator iron a) A, B b) A, B, C c) B d) A, C

Last Answer : Ans: A

In replacing a defective transformer with a new one, which of the following actions must be carried out to insure proper operation of the equipment it serves? A. The secondary leads must be grounded for 10 minutes to remove static charges. B. The transformer connections must be made as before with regard to the indicated polarity. C. The iron core of the transformer must be flashed to pre-magnetize it. D. The iron core must be grounded for 10 minutes to remove any residual magnetism.

Description : In replacing a defective transformer with a new one, which of the following actions must be carried out to insure proper operation of the equipment it serves? A. The secondary leads must be grounded ... magnetize it. D. The iron core must be grounded for 10 minutes to remove any residual magnetism.

Last Answer : Answer: B

If overloading a DC machine becomes necessary in an emergency, you should ____________. A. cool the machine with portable blowers and fans B. hold thermal overload relays open with blocks of wood C. inject small amounts of CO2 into the windings for cooling D. increase the residual magnetism value of windings to reduce eddy currents

Description : If overloading a DC machine becomes necessary in an emergency, you should ____________. A. cool the machine with portable blowers and fans B. hold thermal overload relays open with blocks of ... the windings for cooling D. increase the residual magnetism value of windings to reduce eddy currents

Last Answer : Answer: A

The insulation of electric generators during short idle periods should be _____________. A. allowed to cool slowly to ambient temperatures B. flashed with direct current to remove any residual magnetism C. kept warm by using strip or space heaters D. relieved of all capacitive charge by grounding the conductors

Description : The insulation of electric generators during short idle periods should be _____________. A. allowed to cool slowly to ambient temperatures B. flashed with direct current to remove any residual ... using strip or space heaters D. relieved of all capacitive charge by grounding the conductors

Last Answer : Answer: C

If a magnetic controller contact fails to pick up when the operating coil is energized, one possible cause may be _______________. A. low spring pressure B. low voltage to the coil C. the residual magnetism of the contact faces D. dirty contact faces

Description : If a magnetic controller contact fails to pick up when the operating coil is energized, one possible cause may be _______________. A. low spring pressure B. low voltage to the coil C. the residual magnetism of the contact faces D. dirty contact faces

Last Answer : Answer: B

Insufficient brush pressure on a DC motor may cause _______. A. generator overload B. excess residual magnetism C. water vapor absorption D. sparking of the brushes

Description : Insufficient brush pressure on a DC motor may cause _______. A. generator overload B. excess residual magnetism C. water vapor absorption D. sparking of the brushes

Last Answer : Answer: D

The greatest detrimental effect on idle electrical equipment, such as cargo pump motors, is the _____________. A. loss of residual magnetism B. absorption of moisture in the insulation C. insulation varnish flaking D. dirt collecting on the windings

Description : The greatest detrimental effect on idle electrical equipment, such as cargo pump motors, is the _____________. A. loss of residual magnetism B. absorption of moisture in the insulation C. insulation varnish flaking D. dirt collecting on the windings

Last Answer : Answer: B

Residual magnetism in steel for magnets is increased by the addition of (A) Nickel (B) Cobalt (C) Tungsten (D) Chromium

Description : Residual magnetism in steel for magnets is increased by the addition of (A) Nickel (B) Cobalt (C) Tungsten (D) Chromium

Last Answer : (B) Cobalt

Addition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets. (A) Chromium (B) Nickel (C) Tungsten (D) Cobalt

Description : Addition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets. (A) Chromium (B) Nickel (C) Tungsten (D) Cobalt

Last Answer : (D) Cobalt

What is residual magnetism?*

Description : What is residual magnetism?*

Last Answer : Magnetism remaining in a Ferro magnetic material after the removal of magnetizing force.

What is residual magnetism? Where is it important?

Description : What is residual magnetism? Where is it important?

Last Answer : Residual magnetism is a property in which certain amount of excitation remains back in the conductor even after the removal of the magnets. It is required as we need some magnetism to start off the generation before the field winding has power to produce the full field.

What is the meaning of residual magnetism?

Description : What is the meaning of residual magnetism?

Last Answer : Residual magnetism is a property in which certain amount of excitation remains back in the conductor even after the removal of the magnets.

If residual magnetism is present in a D.C. generator, the induced e.m.f. at zero speed will be?

Description : If residual magnetism is present in a D.C. generator, the induced e.m.f. at zero speed will be?

Last Answer : If residual magnetism is present in a D.C. generator, the induced e.m.f. at zero speed will be zero.

In D.C. machines the residual magnetism is of the order of?

Last Answer : In D.C. machines the residual magnetism is of the order of 2 to 3 percent.

In transmission line, which of the following is the first step in the procedure of using stub matching? A. Calculate stub susceptance. B. Calculate load admittance C. Connect stub to load D. Transform conductance to resistance

Description : In transmission line, which of the following is the first step in the procedure of using stub matching? A. Calculate stub susceptance. B. Calculate load admittance C. Connect stub to load D. Transform conductance to resistance

Last Answer : B. Calculate load admittance

Define susceptance and admittance for parallel circuit.

Description : Define susceptance and admittance for parallel circuit.

Last Answer : Admittance (Y): Admittance is defined as the ability of the circuit to carry (admit) alternating current through it. It is the reciprocal of impedance Z. i.e Y = 1/Z. For parallel circuit consisting two ... In DC circuit, the reactance is absent, hence X = 0 and susceptance equals to zero.

Capacitive susceptance is a measure of?

Description : Capacitive susceptance is a measure of?

Last Answer : Capacitive susceptance is a measure of a purely capacitive circuit's ability to pass current.

What is permeance?

Description : What is permeance?

Last Answer : It is the reciprocal of reluctance, which helps to develop or establish magnetic flux easily in a magnetic material as in the case of conductivity in an electrical circuit.

Define permeance.

Description : Define permeance.

Last Answer : The reluctance is the opposition to the flow of magnetic flux. And the reciprocal of reluctance is known as permeance. The unit of reluctance is ampere per weber so the unit of permeance is ... . permeance is the property of magnetic circuit which allows the flow of magnetic flux through it.

The function of the commutator in a DC motor is to ________. A. reverse the flow of current through the armature B. reverse the flow of current in the field poles C. reduce the reluctance of the magnetic path through the motor D. shift the neutral running plane of the brushes to prevent sparking

Description : The function of the commutator in a DC motor is to ________. A. reverse the flow of current through the armature B. reverse the flow of current in the field poles C. reduce the reluctance of the magnetic path through the motor D. shift the neutral running plane of the brushes to prevent sparking

Last Answer : Answer: A

43 The purpose of providing an iron core in a transformer is to A.Provide support to windings B. Reduce hysteresis loss C. decrease the reluctance of the magnetic path D. reduce eddy current losses

Description : 43 The purpose of providing an iron core in a transformer is to A.Provide support to windings B. Reduce hysteresis loss C. decrease the reluctance of the magnetic path D. reduce eddy current losses

Last Answer : C. Decrease the reluctance of the magnetic path

The slot leakage can be calculated by making which of the following assumptions ? (a) The current in the slot conductors is uniformly distributed over their cross-section (b) The leakage path is straight across the slot and around the iron at the bottom (c) The permanence of air paths is only considered. The reluctance of iron paths is assumed as zero (d) All of the above

Description : The slot leakage can be calculated by making which of the following assumptions ? (a) The current in the slot conductors is uniformly distributed over their cross-section (b) The leakage path is straight ... is only considered. The reluctance of iron paths is assumed as zero (d) All of the above

Last Answer : (d) All of the above

Is there any way to remove residual product left in pipes after a batch operation?

Description : Is there any way to remove residual product left in pipes after a batch operation?

Last Answer : OEG Company in Osaka, Japan commercialized a device called Pushkun that runs through pipes and pushes out left over product. The system is particularly valuable in batch operations where product recovery is ... depend on the scale of the system, but are typically around $10,000 US (1998).

Using Weber’s molecular theory of magnetism, describe the polarity of the magnetic poles produced by stroking a magnetic material from right to left with the south pole of a magnet.

Description : Using Weber’s molecular theory of magnetism, describe the polarity of the magnetic poles produced by stroking a magnetic material from right to left with the south pole of a magnet.

Last Answer : South pole at the right, north pole at the left.

Dipoles in any electric field undergo a) Magnetism b) Electromagnetism c) Magnetisation d) Polarisation

Description : Dipoles in any electric field undergo a) Magnetism b) Electromagnetism c) Magnetisation d) Polarisation

Last Answer : d) Polarisation

If you throw a ball across a field, which forces are most likely to cause it to stop? a) Inertia and Magnetism b) Friction and Gravity c) Wind resistance and magnetism d) Gravity and Inertia

Description : If you throw a ball across a field, which forces are most likely to cause it to stop? a) Inertia and Magnetism b) Friction and Gravity c) Wind resistance and magnetism d) Gravity and Inertia

Last Answer : b) Friction and Gravity

When a piece of iron is rubbed with a magnet it acquires magnetism ' What kind of change is this and why ?

Description : When a piece of iron is rubbed with a magnet it acquires magnetism ' What kind of change is this and why ?

Last Answer : When a piece of iron is rubbed by a magnet, it acquires magnetism ' is a physical or positional change. This is because when rubbed by a magnet, no other substance is formed from iron. Again , when a piece of magnetized iron is heated, it loses its magnetism and is converted into ordinary iron.

Indicate which of the following material does not retain magnetism permanently. (a) Soft iron (b) Stainless steel (e) Hardened steel (d) None of the above

Description : Indicate which of the following material does not retain magnetism permanently. (a) Soft iron (b) Stainless steel (e) Hardened steel (d) None of the above

Last Answer : (a) Soft iron

What's new or exciting in your field?

Description : What's new or exciting in your field?

Last Answer : AI driven, real time denoising of images and animations with minimum sampling.