5. Unit of surface tension in S.I. unit is (A) Watt/m (B) Joule/m2 (C) Newton/m2 (D) Joule/m

5. Unit of surface tension in S.I. unit is
(A) Watt/m
(B) Joule/m2
(C) Newton/m2
(D) Joule/m
by

1 Answer

Answer :

Option B
by

Related questions

The unit of power in S.I. units is (A) Newton meter (B) Watt (C) Joule (D) Kilogram meter/sec

Description : The unit of power in S.I. units is (A) Newton meter (B) Watt (C) Joule (D) Kilogram meter/sec

Last Answer : (B) Watt

The unit of power in S.I. units is  (a) newton  (b) pascal  (c) erg  (d) watt  (e) joule.

Description : The unit of power in S.I. units is  (a) newton  (b) pascal  (c) erg  (d) watt  (e) joule.

Last Answer : Answer : d

Which of the following is NOT an SI unit of measure? w) watt x) newton y) joule z) erg e) second

Description : Which of the following is NOT an SI unit of measure? w) watt x) newton y) joule z) erg e) second

Last Answer : ANSWER: Z -- ERG

The force which produces an acceleration of 1 m/sec2 in a mass of 1 kg is called a.100 ergs b.one Newton c.one watt d.One erg e.one joule

Description : The force which produces an acceleration of 1 m/sec2 in a mass of 1 kg is called a.100 ergs b.one Newton c.one watt d.One erg e.one joule

Last Answer : b. one Newton

Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger, the shell pressure drop is maximum for orifice baffles (C) S.I. unit of fouling factor is Watt/m2 .°K (D) Longitudinal fins are used in extended surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Description : Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger ... surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Last Answer : (C) S.I. unit of fouling factor is Watt/m2 .°K

Name the quantities which are measured by the following units. (i) Newton (ii) Joule (iii) Watt (iv) Volt (v) Light year (vi) Angstrom (vii) Acre-foot (viii) Becquerel (ix) Hertz (x) Cusec

Description : Name the quantities which are measured by the following units. (i) Newton (ii) Joule (iii) Watt (iv) Volt (v) Light year (vi) Angstrom (vii) Acre-foot (viii) Becquerel (ix) Hertz (x) Cusec

Last Answer : Answers: (i) Force (ii) Work Energy (iii) Power of electricity (iv) Potential difference (v) Distance of stars and planets (vi) Length (vii) Volume (viii) Radioactivity (ix) Frequency (x) Rate of flow of water

The steam engine was invented by (1) James Watt (2) James Prescott Joule (3) New Commen (4) Isaac Newton

Description : The steam engine was invented by (1) James Watt (2) James Prescott Joule (3) New Commen (4) Isaac Newton

Last Answer : (1) James Watt

The unit of energy in S.I. units is  (a) watt  (b) joule  (c) joule/s  (d) joule/m  (e) joule m.

Description : The unit of energy in S.I. units is  (a) watt  (b) joule  (c) joule/s  (d) joule/m  (e) joule m.

Last Answer : Answer : b

Which of the following is not a unit of energy? a.Joule b.kW c.N-m d.Electron volt e.Watt-hour

Description : Which of the following is not a unit of energy? a.Joule b.kW c.N-m d.Electron volt e.Watt-hour

Last Answer : b. kW

SI unit for the surface tension is ____. (1) kg/m2 (2) kg/m3 (3) N/m (4) kg/m

Description : SI unit for the surface tension is ____. (1) kg/m2 (2) kg/m3 (3) N/m (4) kg/m

Last Answer : (3) N/m Explanation: Surface tension is measured in force per unit length. Its SI unit is Newton per meter.

The unit of surface tension is (A) N/m (B) N/m2 (C) N/m3 (D) N-m

Description : The unit of surface tension is (A) N/m (B) N/m2 (C) N/m3 (D) N-m

Last Answer : Answer: Option A

The unit of work or energy in S.I. units is (A) Newton (B) Pascal (C) Kilogram meter (D) Joule

Description : The unit of work or energy in S.I. units is (A) Newton (B) Pascal (C) Kilogram meter (D) Joule

Last Answer : (D) Joule

The unit of force in S.I. units is (A) Kilogram (B) Newton (C) Watt (D) Dyne

Description : The unit of force in S.I. units is (A) Kilogram (B) Newton (C) Watt (D) Dyne

Last Answer : (B) Newton

Unit of Power is_____________. A. Watt B. Joule C. Ampere D. Coulomb

Description : Unit of Power is_____________. A. Watt B. Joule C. Ampere D. Coulomb 

Last Answer : Unit of Power is Watt. 

In SI units, thermal conductivity is expressed in (A) Watt/m.°K (B) Watt/m2 . °K (C) Watt/m2 . °K (D) Watt/m4 . °K

Description : In SI units, thermal conductivity is expressed in (A) Watt/m.°K (B) Watt/m2 . °K (C) Watt/m2 . °K (D) Watt/m4 . °K

Last Answer : (A) Watt/m.°K

Which is the basic unit of lumen , joule , mole and newton ?

Last Answer : The middle mole is a basic unit.

Which of the following is a unit of isolation factor? (A) Newton (B) Joule (C) Hz (D) None of the above

Description : Which of the following is a unit of isolation factor? (A) Newton (B) Joule (C) Hz (D) None of the above

Last Answer : (D) None of the above

Which of the following is correct regarding isolation factor? a) Dimensionless quantity b) Has Newton as its unit c) Has joule as its Unit d) Has Hz as its unit

Description : Which of the following is correct regarding isolation factor? a) Dimensionless quantity b) Has Newton as its unit c) Has joule as its Unit d) Has Hz as its unit

Last Answer : a) Dimensionless quantity

_________ is the unit of pressure and stress.  a) Newton  b) Pascal  c) Hertz  d) Joule

Description : _________ is the unit of pressure and stress.  a) Newton  b) Pascal  c) Hertz  d) Joule

Last Answer : Pascal

__________ is the unit of force.  a) Newton  b) Pascal  c) Hertz  d) Joule

Description : __________ is the unit of force.  a) Newton  b) Pascal  c) Hertz  d) Joule

Last Answer : Newton

What is the SI unit of energy?  A. Newton  B. Btu  C. Calorie  D. Joule

Description : What is the SI unit of energy?  A. Newton  B. Btu  C. Calorie  D. Joule

Last Answer : Joule

One joule is the energy required to (A) Raise the temperature of 1 gm of water by 1°C (B) Raise the temperature of 1 kg of water by 1°C (C) Move a mass of 1 gm by 1 cm distance by a force of 1 Newton (D) Move a mass of 1 kg by 1 m distance by a force of 1 Newton

Description : One joule is the energy required to (A) Raise the temperature of 1 gm of water by 1°C (B) Raise the temperature of 1 kg of water by 1°C (C) Move a mass of 1 gm by 1 cm distance by a force of 1 Newton (D) Move a mass of 1 kg by 1 m distance by a force of 1 Newton

Last Answer : Answer : D

Surface tension has the units of (A) Newton-sec/mB) Newton-m/sec (C) Newton/m (D) Newton

Description : Surface tension has the units of (A) Newton-sec/m B) Newton-m/sec (C) Newton/m (D) Newton

Last Answer : Answer: Option C

What is the SI unit of frequency? (1) Newton (2) Watt (3) Farad (4) Hertz

Description : What is the SI unit of frequency? (1) Newton (2) Watt (3) Farad (4) Hertz

Last Answer : (4) Hertz Explanation: The number of waves or vibrations passing through a point in one second is called Frequency. The SI (System International) Unit of Frequency is Hertz(Hz).

_________ is the quantity of heat required to raise the temperature of one pound of water 1 F˚ from 63 ˚F to 64 ˚F.  a. one Joule  b. one calorie  c. one watt  d. one BTU

Description : _________ is the quantity of heat required to raise the temperature of one pound of water 1 F˚ from 63 ˚F to 64 ˚F.  a. one Joule  b. one calorie  c. one watt  d. one BTU

Last Answer : one BTU

For a light detector, responsivity is measured in: a. amps per watt b. µW per amp c. mA per joule d. µsec per µW

Description : For a light detector, responsivity is measured in: a. amps per watt b. µW per amp c. mA per joule d. µsec per µW

Last Answer : a. amps per watt

The Scientist who told “Heat is a form of Energy” was------? A. Thomas Alva Edison B. Newton C. Joule (Answer) D. Kepler

Description : The Scientist who told “Heat is a form of Energy” was------? A. Thomas Alva Edison B. Newton C. Joule (Answer) D. Kepler

Last Answer : C. Joule (Answer)

Entropy is measured in ______.  A. Joule/Kelvin  B. Joule-Meter/Kelvin  C. Meter/Kelvin  D. Newton/Kelvin

Description : Entropy is measured in ______.  A. Joule/Kelvin  B. Joule-Meter/Kelvin  C. Meter/Kelvin  D. Newton/Kelvin

Last Answer : Joule/Kelvin

The unit of bulk modulus of elasticity for a liquid in S.I. unit is (A) N (B) N/m (C) N/m2 (D) N/m3

Description : The unit of bulk modulus of elasticity for a liquid in S.I. unit is (A) N (B) N/m (C) N/m2 (D) N/m3

Last Answer : (C) N/m2

In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (θ) and thermal diffusivity (α). The units of these quantities are. (A) μ , α and θ all have units of m/s (B) μ , α and θ all have units of m2/s (C) α and θ have units of m2/s, while μ has unit of m/s (D) α and θ have units of m/s, while μ has unit of m2/s

Description : In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (θ) and thermal diffusivity (α). The units of these quantities are. (A) μ , α and θ all have units of m/ ... μ has unit of m/s (D) α and θ have units of m/s, while μ has unit of m2/s

Last Answer : Option C

Who invented the Railway engine first? A. Charles Babbage B. George Stephenson C. James Watt D. Isaac Newton

Description : Who invented the Railway engine first? A. Charles Babbage B. George Stephenson C. James Watt D. Isaac Newton

Last Answer : B [George Stephenson] Explanation: In In 1825 George Stephenson built the Locomotion for the Stockton and Darlington Railway. This was the first public steam railway in the world and then in 1829, ... is divided into 18 zones. Recently added South Coast Railway zones in Indian Railway (2019).

Units of stress are A. Newton B. Joules C. Pascal D. Watt

Description : Units of stress are A. Newton B. Joules C. Pascal D. Watt

Last Answer :  Pascal

Who invented the railway engine? (a) Charles Babbage (b) Isaac Newton (c) James Watt (d) George Stephenson

Description : Who invented the railway engine? (a) Charles Babbage (b) Isaac Newton (c) James Watt (d) George Stephenson

Last Answer : (d) George Stephenson

The unit of kinematic viscosity in S. I. units is (A) N-m/s (B) N-s/m2 (C) m 2 /s (D) N-m

Description : The unit of kinematic viscosity in S. I. units is (A) N-m/s (B) N-s/m2 (C) m 2 /s (D) N-m

Last Answer : Answer: Option C

The unit of dynamic viscosity in S.I. units is (A) N-m/s2 (B) N-s/m2 (C) Poise (D) Stoke

Description : The unit of dynamic viscosity in S.I. units is (A) N-m/s2 (B) N-s/m2 (C) Poise (D) Stoke

Last Answer : Answer: Option B

S.I. unit of Magnetic flux is (1) weber (2) weber/m (3) weber/m4 (4) weber–m2

Description : S.I. unit of Magnetic flux is (1) weber (2) weber/m (3) weber/m4 (4) weber–m2 

Last Answer : weber

S.I unit of strain is a) Newton b) N m–2 c) Pascal d) no unit

Description : S.I unit of strain is a) Newton b) N m–2 c) Pascal d) no unit

Last Answer : a) Newton

S.I unit of stress is: a) N/m b) N m c) Nm–2 d) Newton

Description : S.I unit of stress is: a) N/m b) N m c) Nm–2 d) Newton

Last Answer : c) Nm–2

What is the unit of thermal conductivity? (A) Kcal/hr. m2 °C (B) Kcal/hr.m.°C (C) Kcal/hr.m (D) Kcal/hr. °C

Description : What is the unit of thermal conductivity? (A) Kcal/hr. m2 °C (B) Kcal/hr.m.°C (C) Kcal/hr.m (D) Kcal/hr. °C

Last Answer : (B) Kcal/hr.m.°C

The unit of conductance in SI unit is (A) W/m (B) W/m2 (C) W/°K (D) W/m°K

Description : The unit of conductance in SI unit is (A) W/m (B) W/m2 (C) W/°K (D) W/m°K

Last Answer : (C) W/°K

. One stoke (unit of kinematic viscosity) is equivalent to (A) 1 cm2 /second (B) 1 m2 /second (C) 1 gm/cm. second (D) 1 kg. m/second

Description : . One stoke (unit of kinematic viscosity) is equivalent to (A) 1 cm2 /second (B) 1 m2 /second (C) 1 gm/cm. second (D) 1 kg. m/second

Last Answer : (A) 1 cm2 /second

The unit of dynamic viscosity in SI unit is (A) kg/m. sec (B) N/m2 (C) m2 /sec (D) m/N. sec

Description : The unit of dynamic viscosity in SI unit is (A) kg/m. sec (B) N/m2 (C) m2 /sec (D) m/N. sec

Last Answer : (A) kg/m. sec

N. second/m2 is (A) The S.I. unit of dynamic viscosity (B) The S.I. unit of kinematic viscosity (C) Equivalent to one poise (D) Equivalent to one stoke

Description : N. second/m2 is (A) The S.I. unit of dynamic viscosity (B) The S.I. unit of kinematic viscosity (C) Equivalent to one poise (D) Equivalent to one stoke

Last Answer : (A) The S.I. unit of dynamic viscosity

Which of the following is not the unit of energy? (A) kg m (B) kcal (C) watt (D) watt hours

Description : Which of the following is not the unit of energy?  (A) kg m  (B) kcal  (C) watt  (D) watt hours 

Last Answer : (C) watt 

S.I. unit of energy is joule and it is equivalent to

Description : S.I. unit of energy is joule and it is equivalent to

Last Answer : S.I. unit of energy is joule and it is equivalent to (A) 106 erg (B) 10-7 erg (C) 107 erg (D) 105 erg

A cylindrical pillar is 50 cm in diameter and 3.5 m in height. Find the cost of painting the curved surface of the pillar at the rate of ₹12.50 per m2 . -Maths 9th

Description : A cylindrical pillar is 50 cm in diameter and 3.5 m in height. Find the cost of painting the curved surface of the pillar at the rate of ₹12.50 per m2 . -Maths 9th

Last Answer : Diameter of the pillar = 50 cm ∴ Radius (r) = 502m = 25 m = 14m and height (h) = 3.5m Curved surface area of a pillar = 2πrh ∴ Curved surface area to be painted = 112m2 ∴ Cost of painting of 1 m2 pillar = Rs. 12.50 ∴ Cost of painting of 112 m2 pillar = Rs. ( 112 x 12.50 ) = Rs. 68.75.

Define surface tension. State its S.I. unit.

Description : Define surface tension. State its S.I. unit.

Last Answer : Definition:- The force acting per unit length of an imaginary line drawn to surface of liquid.  OR  The surface tension is defined as the property of liquids by virtue of which the surface of a liquid is ... due to the tendency to contract and occupy minimum surface area.  S.I. unit :- N/m