Water hamming effect is occurs in a) Surge tank b) Penstock c) Turbine d) Reservoir

Water hamming effect is occurs in
a) Surge tank
b) Penstock
c) Turbine
d) Reservoir
by

1 Answer

Answer :

Ans: Penstock
by

Related questions

State the function of following with respect to hydro power plant : I) Storage reservoir II) Surge tank II) Spillways IV) Trash rack

Description : State the function of following with respect to hydro power plant : I) Storage reservoir II) Surge tank II) Spillways IV) Trash rack

Last Answer : I) Storage reservoir: It is the basic requirement of hydroelectric plant. Its purpose is to store water which may be utilized to run the prime mover to produce electrical power. A reservoir stores during ... of nozzles of impulse turbines. It is made of steel bars and is placed across the intake.

What is the pipe called which lifts water from a reservoir to a greater height than the initial level in the supply reservoir? (A) Penstock (B) Siphon (C) Tunnel (D) Pressure pipeline

Description : What is the pipe called which lifts water from a reservoir to a greater height than the initial level in the supply reservoir? (A) Penstock (B) Siphon (C) Tunnel (D) Pressure pipeline

Last Answer : (B) Siphon

What is the use of surge tank?

Description : What is the use of surge tank?

Last Answer : The surge tank is used to provide better regulation of water pressure in the system. The surge tank controls the water when the load on the turbine decreases and supplies water when the ... variations resulting from the rapid changes in water flow in penstock and hence prevents water hammer.

Explain about penstock?

Description : Explain about penstock?

Last Answer : The pipe between surge tank and prime mover is known as penstock. It is designed to withstand high pressure. It is made up of reinforced concrete. In very cold areas, the penstock is buried to prevent ice formation and to reduce the expansion joints.

State the effect of Water hammering effect in penstock of HPS and method to reduce it.

Description : State the effect of Water hammering effect in penstock of HPS and method to reduce it. 

Last Answer : Water hammering effect in penstock of HPS: When load on power plant or alternator decreases then Governor (valve) reduces discharge of water. Due to sudden reduction in water discharge causes ... helps by storing this rejected water immediately. In this way it avoids water hammer effect. 

When gravity and pumping systems of water distribution are adopted, the type of distribution reservoir, is (A) Elevated tank (B) Ground source reservoir (C) Intz tank (D) Stand pipe

Description : When gravity and pumping systems of water distribution are adopted, the type of distribution  reservoir, is  (A) Elevated tank  (B) Ground source reservoir  (C) Intz tank  (D) Stand pipe

Last Answer : (A) Elevated tank 

The purpose of a surge tank is (A) To control the pressure variations due to rapid changes in the pipe line flow (B) To eliminate water hammer possibilities (C) To regulate flow of water to turbines by providing necessary retarding head of water (D) All of the above

Description : The purpose of a surge tank is (A) To control the pressure variations due to rapid changes in the pipe line flow (B) To eliminate water hammer possibilities (C) To regulate flow of water to turbines by providing necessary retarding head of water (D) All of the above

Last Answer : Answer: Option D

Is there a rear reservoir tank for the rear wiper on a 2006 Jeep Commander?

Description : Is there a rear reservoir tank for the rear wiper on a 2006 Jeep Commander?

Last Answer : No. Both washer systems use the under hood reservoir.

What is the use of surge tank?

Description : What is the use of surge tank?

Last Answer : The surge tank is used to provide better regulation of water pressure in the system. The surge tank controls the water when the load on the turbine decreases and supplies water when the ... variations resulting from the rapid changes in water flow in penstock and hence prevents water hammer.

What Is The Use Of Surge Tank?

Description : What Is The Use Of Surge Tank?

Last Answer : The surge tank is used to provide better regulation of water pressure in the system. The surge tank controls the water when the load on the turbine decreases and supplies water when the ... variations resulting from the rapid changes in water flow in penstock and hence prevents water hammer.

State the need of surge tank in hydroelectric power plant.

Description : State the need of surge tank in hydroelectric power plant.

Last Answer : It is the tank provided in the path of penstock to avoid pulsating discharge at inlet of turbines. To reduce effect of water hammer surge tanks are provided. During flow of ... reservoir to turbine through penstock pressure surges are created to compensate these surges surge tank is provided.

State the purpose of surge tank and spill way in hydroelectric power station.

Description : State the purpose of surge tank and spill way in hydroelectric power station.

Last Answer : Surge tank :- A surge tank is the small reservoir or tank. It is open at the top. It is installed near Vale house of turbine. It avoids water hammer effect when load on turbine reduces. (It ... ; during floods etc. In this way spill way avoids damage of dam due to excess pressure of water.

The function of a surge tank is to

Description : The function of a surge tank is to  (1) produce surge in the pipeline (2) relieve water hammer pressure in the penstock (3) supply water at constant pressure (4) none of above

Last Answer : The function of a surge tank is to relieve water hammer pressure in the penstock

In a pressure penstock 4500 m long, water is flowing at a velocity of 4 m/s. If the velocity of the pressure wave traveling in the pipe, due sudden complete closure of a valve at the downstream end, is given as 1500 m/s, what would be the period of oscillation in second under frictionless conditions? (a) 6 (b) 8 (c) 9 (d) 11

Description : In a pressure penstock 4500 m long, water is flowing at a velocity of 4 m/s. If the velocity of the pressure wave traveling in the pipe, due sudden complete closure of a valve at the downstream end, is ... period of oscillation in second under frictionless conditions? (a) 6 (b) 8 (c) 9 (d) 11

Last Answer : (a) 6

Explain about penstock?

Description : Explain about penstock?

Last Answer : The pipe between surge tank and prime mover is known as penstock. It is designed to withstand high pressure. It is made up of reinforced concrete. In very cold areas, the penstock is buried to prevent ice formation and to reduce the expansion joints.

Explain About Penstock?

Description : Explain About Penstock?

Last Answer : The pipe between surge tank and prime mover is known as penstock. It is designed to withstand high pressure. It is made up of reinforced concrete. In very cold areas, the penstock is buried to prevent ice formation and to reduce the expansion joints.

What is penstock? What is its function?

Description : What is penstock? What is its function?

Last Answer : What is Penstock:- The penstock is the long pipe line. It consists of heavy duty steel pipe.  Function of Penstock:- Function of penstock is to carry water from the water intake (reservoir) to turbine.

For a turbine agitated and baffled tank, operating at low Reynold's number (based on impeller diameter), the power number (Np ) varies with NRe as (A) Np ∝ NRe (B) Np ∝ √NRe (C) Np → constan(D) Np ∝ 1/NRe

Description : For a turbine agitated and baffled tank, operating at low Reynold's number (based on impeller diameter), the power number (Np ) varies with NRe as (A) Np ∝ NRe (B) Np ∝ √NRe (C) Np → constan (D) Np ∝ 1/NRe

Last Answer : (D) Np ∝ 1/NRe

Pick out the wrong statement pertaining to the turbine agitator. (A) Recommended peripheral speed for the turbine agitator is 200-250 metres/minute (B) Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow (C) Generally, the diameter of the agitator is kept between l/3rd to l/6th of the tank diameter while the blade length is l/4th of agitator diameter (with central disc, it is l/8th of the agitator diameter)

Description : Pick out the wrong statement pertaining to the turbine agitator. (A) Recommended peripheral speed for the turbine agitator is 200-250 metres/minute (B) Pitched blade turbine agitator gives only radial flow with ... l/4th of agitator diameter (with central disc, it is l/8th of the agitator diameter)

Last Answer : (B) Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow

LH surge occurs during phase of menstrual cycle.

Description : LH surge occurs during phase of menstrual cycle.

Last Answer : LH surge occurs during phase of menstrual cycle. A. Menstrual phase B. Beginning of proliferstive phase. C ... phase D. At the middle of the cycle.

About which day in a normal human menstrual cycle does rapid secretion of LH (popularly called LH surge) normally occurs? (a) 14th day (b) 20th day (c) 5th day (d) 11th day (

Description : About which day in a normal human menstrual cycle does rapid secretion of LH (popularly called LH surge) normally occurs? (a) 14th day (b) 20th day (c) 5th day (d) 11th day (

Last Answer : (a) 14th day

Which of the following statements is incorrect? (a) Station batteries are used to operate relay only (b) The lightning arresters are basically surge diverters (c) An impedance relay has maximum fault current when fault occurs near the relay (d) A high speed relay has an operation of 1 to 2 cycles

Description : Which of the following statements is incorrect? (a) Station batteries are used to operate relay only (b) The lightning arresters are basically surge diverters (c) An impedance relay has maximum fault current when fault occurs near the relay (d) A high speed relay has an operation of 1 to 2 cycles

Last Answer : (a) Station batteries are used to operate relay only

What is the main purpose of the reservoir?

Description : What is the main purpose of the reservoir?

Last Answer : The main purpose of reservoir is to store water received from catchments areas during the rainy seasons and supply the same during the dry season.

When insulation failure produces a low resistance current path between two conductors, the resulting condition is known as ____________. A. an open B. a short circuit C. a ground D. a surge

Description : When insulation failure produces a low resistance current path between two conductors, the resulting condition is known as ____________. A. an open B. a short circuit C. a ground D. a surge

Last Answer : Answer: B

What is the function of the interpoles installed in DC motors? A. To provide greater torque by strengthening the main field. B. To provide sparkless commutation without having to shift the brushes. C. To limit the production of counter-electromotive force. D. To limit the starting surge current.

Description : What is the function of the interpoles installed in DC motors? A. To provide greater torque by strengthening the main field. B. To provide sparkless commutation without having to shift the brushes. C. To limit the production of counter-electromotive force. D. To limit the starting surge current.

Last Answer : Answer: B

Fuses placed in series with a thermal trip-type circuit breaker are used for _____________. A. time-delay protection B. short-circuit protection C. short duration surge protection D. sustained overload protection

Description : Fuses placed in series with a thermal trip-type circuit breaker are used for _____________. A. time-delay protection B. short-circuit protection C. short duration surge protection D. sustained overload protection

Last Answer : Answer: B

What is meant by voltage surge?

Description : What is meant by voltage surge?

Last Answer : Voltage surge is sudden excessive rise in voltage that may be dangerous to the electrical equipment of an installation. Voltage surge cause damage to insulation of the system. Voltage surges are caused because of lightning, switching on and off the load at high voltages

What is meant by Lightning arrester or surge diverter?

Description : What is meant by Lightning arrester or surge diverter?

Last Answer : A Surge Diverter is a device that is connected between line and earth, i.e, in parallel with the equipment under protection at the substation. It limits the duration and amplitude of the follow current

What is the difference between the lightning arrester and surge absorber?

Description : What is the difference between the lightning arrester and surge absorber?

Last Answer : Lightning arrester limits the duration and amplitude of the follow current while a surge absorber reduces the steepness of the wave front for a particular surge

What is the difference between surge arrestor and lightning arrestor?

Description : What is the difference between surge arrestor and lightning arrestor?

Last Answer : LA is installed outside and the effect of lightning is grounded, where as surge arrestor installed inside panels comprising of resistors which consumes the energy and nullify the effect of surge.

What Is The Difference Between Surge Arrestor And Lightning Arrestor?

Description : What Is The Difference Between Surge Arrestor And Lightning Arrestor?

Last Answer : LA is installed outside and the effect of lightning is grounded,where as surge arrestor installed inside panels comprising of resistors which consumes the energy and nullify the effect of surge.

What is the difference between surge arrestor and lightning arrestor?

Description : What is the difference between surge arrestor and lightning arrestor?

Last Answer : A:Lightning Arrestor is installed outside and the effect of lightning is grounded where as surge arrestor installed inside panels comprising of resistors which consumes the energy and nullify the effect of surge.

What is the difference between surge arrestor and lightning arrestor?

Description : What is the difference between surge arrestor and lightning arrestor?

Last Answer : Lightning arrestor is installed outside and the effect of lightning is grounded, whereas surge arrestor installed inside panels comprising of resistors which consumes the energy and nullify the effect of surge.

How does the over voltage surge affect the power system?

Description : How does the over voltage surge affect the power system?

Last Answer : The over voltage of the power system leads to insulation breakdown of the equipments. It causes the line insulation to flash over and may also damage the nearby transformer, generators and the other equipment connected to the line.

What is Recurrent Surge Oscillograph (RSO) Test?

Description : What is Recurrent Surge Oscillograph (RSO) Test?

Last Answer : RSO test is performed to detect faults in rotor windings. The electrical faults in generator rotors fall into two main categories. The faults from the winding to the body and the ... The existence of the faults will frequently display excessive mechanical vibration and cause serious concern. 

What are the uses of high voltage surge test?

Description : What are the uses of high voltage surge test?  

Last Answer : This test gives distinct wave forms giving indications of various defects such as, a. Turn to turn short in same phases. b. Coil to coil short in same phases. c. Partial phase to phase short. ... connections. g. Open coil connections. h. Short to ground partial. i. Short to ground complete. 

What law states that it is impossible to operate an engine operating in a cycle that will have no other effect than to extract heat from a reservoir and turn it into an equivalent amount of work?

Description : What law states that it is impossible to operate an engine operating in a cycle that will have no other effect than to extract heat from a reservoir and turn it into an equivalent amount of work? ...  B. First law of thermodynamics  C. Second law of thermodynamics  D. Third law of thermodynamics

Last Answer : Second law of thermodynamics

Is the cyclic redundancy check better than hamming code?

Description : Is the cyclic redundancy check better than hamming code?

Last Answer : It depends on what you are doing.The cyclic redundancy check will only detect an error, while thehamming code can also correct many types of errors. However toperform this correction the extra ... channels, disk sectors).Normally hamming code is done on individual bytes or words ofcomputer memory.

Hamming codes was developed in _ a 1953 b. 1950 c. 1945 d. 1956

Description : Hamming codes was developed in _ a 1953 b. 1950 c. 1945 d. 1956

Last Answer : b. 1950

The bit positionina can be numbered from 1 through 2h, a. Hamming code word b. Hamming distance word c. Both d. None of these

Description : The bit positionina can be numbered from 1 through 2h, a. Hamming code word b. Hamming distance word c. Both d. None of these

Last Answer : a. Hamming code word

In block coding, ifn = 5, the maximum Hamming distance between two codewords is ________. A) 2 B) 3 C) 5 D) none of the above

Description : In block coding, ifn = 5, the maximum Hamming distance between two codewords is ________. A) 2 B) 3 C) 5 D) none of the above

Last Answer : 5

The Hamming distance between 100 and 001 is ________. A) 2 B) 0 C) 1 D) none of the above

Description : The Hamming distance between 100 and 001 is ________. A) 2 B) 0 C) 1 D) none of the above

Last Answer : 2

The Hamming distance between equal codewords is _________. A) 1 B) n C) 0 D) none of the above

Description : The Hamming distance between equal codewords is _________. A) 1 B) n C) 0 D) none of the above

Last Answer : 0

To guarantee correction ofup to 5 errors in all cases, the minimum Hamming distance in a block code must be________. A) 5 B) 6 C) 11 D) none of the above

Description : To guarantee correction ofup to 5 errors in all cases, the minimum Hamming distance in a block code must be________. A) 5 B) 6 C) 11 D) none of the above

Last Answer : 11

To guarantee the detectionof up to 5errors in all cases, the minimum Hamming distance in a block code mustbe _______. A) 5 B) 6 C) 11 D) none of the above

Description : To guarantee the detectionof up to 5errors in all cases, the minimum Hamming distance in a block code mustbe _______. A) 5 B) 6 C) 11 D) none of the above

Last Answer : 6

The ________ between two words is the number ofdifferences between corresponding bits. A) Hamming code B) Hamming distance C) Hamming rule D) none of the above

Description : The ________ between two words is the number ofdifferences between corresponding bits. A) Hamming code B) Hamming distance C) Hamming rule D) none of the above

Last Answer : Hamming distance

Error detection ata data link level is achieved by A. bit stuffing B. cyclic redundancy codes C. Hamming codes D. equalization

Description : Error detection ata data link level is achieved by A. bit stuffing B. cyclic redundancy codes C. Hamming codes D. equalization

Last Answer : cyclic redundancy codes

To guarantee correction of upto t errors, the minimum Hamming distance d min in a block code must be ________. a. t+1 b. t−2 c. 2t−1 d. 2t+1

Description : To guarantee correction of upto t errors, the minimum Hamming distance d min in a block code must be ________. a. t+1 b. t−2 c. 2t−1 d. 2t+1

Last Answer : d. 2t+1

_______ can detect burst error of length less than or equal to degree of the polynomial and detects burst errors that affect odd number of bits. a. Hamming Code b. CRC c. VRC d. None of the above

Description : _______ can detect burst error of length less than or equal to degree of the polynomial and detects burst errors that affect odd number of bits. a. Hamming Code b. CRC c. VRC d. None of the above

Last Answer : b. CRC

Coding schemes can be divided into two broad categories…………, ……A. character coding, integer coding B. hamming coding and block coding C. Hamming coding and convolution coding D. Block Coding and Convolution Coding.

Description : Coding schemes can be divided into two broad categories…………, …… A. character coding, integer coding B. hamming coding and block coding C. Hamming coding and convolution coding D. Block Coding and Convolution Coding.

Last Answer : D. Block Coding and Convolution Coding.