What is the pipe called which lifts water from a reservoir to a greater height than the initial level in the supply reservoir? (A) Penstock (B) Siphon (C) Tunnel (D) Pressure pipeline

What is the pipe called which lifts water from a reservoir to a greater
height than the initial level in the supply reservoir?
(A) Penstock
(B) Siphon
(C) Tunnel
(D) Pressure pipeline
by

1 Answer

Answer :

(B) Siphon
by

Related questions

Water hamming effect is occurs in a) Surge tank b) Penstock c) Turbine d) Reservoir

Description : Water hamming effect is occurs in a) Surge tank b) Penstock c) Turbine d) Reservoir

Last Answer : Ans: Penstock

Hydraulic intensifier is used for increasing the (A) Rate of velocity of liquid supply (B) Rate of flow through delivery pipeline of a pump (C) Intensity of pressure of the liquid (D) Momentum rate through delivery pipe

Description : Hydraulic intensifier is used for increasing the (A) Rate of velocity of liquid supply (B) Rate of flow through delivery pipeline of a pump (C) Intensity of pressure of the liquid (D) Momentum rate through delivery pipe

Last Answer : (C) Intensity of pressure of the liquid

In a pressure penstock 4500 m long, water is flowing at a velocity of 4 m/s. If the velocity of the pressure wave traveling in the pipe, due sudden complete closure of a valve at the downstream end, is given as 1500 m/s, what would be the period of oscillation in second under frictionless conditions? (a) 6 (b) 8 (c) 9 (d) 11

Description : In a pressure penstock 4500 m long, water is flowing at a velocity of 4 m/s. If the velocity of the pressure wave traveling in the pipe, due sudden complete closure of a valve at the downstream end, is ... period of oscillation in second under frictionless conditions? (a) 6 (b) 8 (c) 9 (d) 11

Last Answer : (a) 6

The siphon will work satisfactorily, if the minimum pressure in the pipe is __________ vapour pressure of liquid. (A) Equal to (B) Less than (C) More than (D) None of these

Description : The siphon will work satisfactorily, if the minimum pressure in the pipe is __________ vapour pressure of liquid. (A) Equal to (B) Less than (C) More than (D) None of these

Last Answer : Answer: Option C

The difference in the reservoir level and the lowest point of the water mains is 180 m. The expected pressure due to water hammer is 7.5 kg/cm2 in a pressure conduit of diameter 1 m. Assuming the efficiency of the riveted joints of the pipe as 0.6 and minimum cover 3 mm for corrosion, the thickness of the pipe materials, is (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Description : The difference in the reservoir level and the lowest point of the water mains is 180 m. The  expected pressure due to water hammer is 7.5 kg/cm2  in a pressure conduit of diameter 1 m.  Assuming the efficiency of the ... , is  (A) 10 mm  (B) 15 mm  (C) 20 mm  (D) 25 mm 

Last Answer : (C) 20 mm

Purpose of hydraulic accumulator is to (A) Ensure intermittent supply of hydraulic pressure (B) Increase the pressure and store/ accumulate it (C) Accumulate pressure to increase force (D) Generate high pressure to operate hydraulic machines like cranes, lifts, presses etc

Description : Purpose of hydraulic accumulator is to (A) Ensure intermittent supply of hydraulic pressure (B) Increase the pressure and store/ accumulate it (C) Accumulate pressure to increase force (D) Generate high pressure to operate hydraulic machines like cranes, lifts, presses etc

Last Answer : (D) Generate high pressure to operate hydraulic machines like cranes, lifts, presses etc

An inverted siphon is designed generally for A. One pipe B. Two pipes C. Three pipes D. Four pipes

Description : An inverted siphon is designed generally for A. One pipe B. Two pipes C. Three pipes D. Four pipes

Last Answer : ANS: C

For sewers, inverted siphon is provided for A. One pipe B. Two pipes C. Three pipes D. Four pipes

Description : For sewers, inverted siphon is provided for A. One pipe B. Two pipes C. Three pipes D. Four pipes

Last Answer : ANS: C

Fluid flow in a/an __________ is an example of pressure flow. (A) Partially filled pipeline (B) Pipe (C) Open channel (D) River

Description : Fluid flow in a/an __________ is an example of pressure flow. (A) Partially filled pipeline (B) Pipe (C) Open channel (D) River

Last Answer : (B) Pipe

Which of the following factors does not contribute to the pressure drop in a pipeline? (A) Velocity of fluid (B) Size of pipe (C) Length of pipe and number of bends (D) None of these

Description : Which of the following factors does not contribute to the pressure drop in a pipeline? (A) Velocity of fluid (B) Size of pipe (C) Length of pipe and number of bends (D) None of these

Last Answer : (D) None of these

A Venturimeter cannot be used for the direct measurement of (A) Datum difference in the stretch of pipe-flow (B) Pressure difference in the flow through pipeline(C) Friction loss in pipe flow(D) All (A), (B) and (C)

Description : A Venturimeter cannot be used for the direct measurement of (A) Datum difference in the stretch of pipe-flow (B) Pressure difference in the flow through pipeline (C) Friction loss in pipe flow (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Disc compensators are provided in large diameter fuel gas carrying pipelines to (A) Keep the pipe in proper orientation (B) Make the pipe joint leak-proof (C) Account for contraction/expansion of pipe due to temperature changes of the surroundings (D) Account for the pressure variation side the pipeline

Description : Disc compensators are provided in large diameter fuel gas carrying pipelines to (A) Keep the pipe in proper orientation (B) Make the pipe joint leak-proof (C) Account for contraction/expansion ... due to temperature changes of the surroundings (D) Account for the pressure variation side the pipeline

Last Answer : (C) Account for contraction/expansion of pipe due to temperature changes of the surroundings

An example of unsteady non uniform flow is the flow of liquid under pressure through a (A) Tapering pipe at constant flow rate (B) Tapering pipe at either decreasing or increasing flow rate (C) Long pipeline of constant diameter (D) None of these

Description : An example of unsteady non uniform flow is the flow of liquid under pressure through a (A) Tapering pipe at constant flow rate (B) Tapering pipe at either decreasing or increasing flow rate (C) Long pipeline of constant diameter (D) None of these

Last Answer : (B) Tapering pipe at either decreasing or increasing flow rate

To pump water from a water reservoir 3 m deep and maximum water level at 135 m, a pump is installed to lift water up to R.L. 175 m at a constant rate of 36,00,000 litres per hour. If the length of the pipe is 1506 m and f = 0.01, ignoring other minor losses and assuming the economical diameter from Lea's formula D = 1.2 Q, the water horse power of the pump is (A) 400 (B) 450 (C) 500(D) 600

Description : To pump water from a water reservoir 3 m deep and maximum water level at 135 m, a pump is  installed to lift water up to R.L. 175 m at a constant rate of 36,00,000 litres per hour. If the length  of the ... the water horse power of the pump is  (A) 400  (B) 450  (C) 500 (D) 600

Last Answer : (D) 600

Two or more computers connected to each other of sharing information form a _____ 1) Network 2) Router 3) Server 4) Tunnel 5) Pipeline

Description : Two or more computers connected to each other of sharing information form a _____ 1) Network 2) Router 3) Server 4) Tunnel 5) Pipeline

Last Answer : Answer :1

The energy loss over a length of pipeline according to Darcy-Weisbach equation for pipe flow is ___________ the mean velocity of flow. (A) Directly proportional to (B) Directly proportional to square of (C) Inversely proportional to (D) Inversely proportional to square of

Description : The energy loss over a length of pipeline according to Darcy-Weisbach equation for pipe flow is ___________ the mean velocity of flow. (A) Directly proportional to (B) Directly proportional to square of (C) Inversely proportional to (D) Inversely proportional to square of

Last Answer : (B) Directly proportional to square of

A man lifts a stone weighting 300 g from the ground to a height of 2m and throws it horizontally with a velocity of 6 m/sec. The work done by the man is a.7.686 J b.11.286 J c.5.886 J d.8.343 J e.Tapered bearing

Description : A man lifts a stone weighting 300 g from the ground to a height of 2m and throws it horizontally with a velocity of 6 m/sec. The work done by the man is a.7.686 J b.11.286 J c.5.886 J d.8.343 J e.Tapered bearing

Last Answer : b. 11.286 J

In a construction site, a crane lifts 1000 kg of concrete mix to roof top at a height of 20 meters in 50 seconds. If the value of gravity 'g' due to earth is 10 m s-2, the power of elevator will be. -Physics

Description : In a construction site, a crane lifts 1000 kg of concrete mix to roof top at a height of 20 meters in 50 seconds. If the value of gravity 'g' due to earth is 10 m s-2, the power of elevator will be. -Physics

Last Answer : 4 KW (kilowatt)

A worker lifts a 10 kilogram block a vertical height of 2 meters. The work he does on the block is: w) 5 Joules x) 20 Joules y) 49 Joules z) 200 Joules

Description : A worker lifts a 10 kilogram block a vertical height of 2 meters. The work he does on the block is: w) 5 Joules x) 20 Joules y) 49 Joules z) 200 Joules

Last Answer : ANSWER: Z -- 200 JOULES

Steam trap is used to (A) Condense the steam flowing in the pipeline (B) Remove water resulting from partial condensation of steam (C) Stop the supply of steam (D) None of these

Description : Steam trap is used to (A) Condense the steam flowing in the pipeline (B) Remove water resulting from partial condensation of steam (C) Stop the supply of steam (D) None of these

Last Answer : (B) Remove water resulting from partial condensation of steam

When gravity and pumping systems of water distribution are adopted, the type of distribution reservoir, is (A) Elevated tank (B) Ground source reservoir (C) Intz tank (D) Stand pipe

Description : When gravity and pumping systems of water distribution are adopted, the type of distribution  reservoir, is  (A) Elevated tank  (B) Ground source reservoir  (C) Intz tank  (D) Stand pipe

Last Answer : (A) Elevated tank 

Why would visual inspection of the excess weld metal at the bottom of a cross country pipeline be important? a) It is the most difficult area to weld b) It is the dirtiest part of the pipe as it is near the ground c) Welders always forget to weld the bottom d) It is the most difficult area to radiograph

Description : Why would visual inspection of the excess weld metal at the bottom of a cross country pipeline be important? a) It is the most difficult area to weld b) It is the dirtiest part of the pipe as ... ground c) Welders always forget to weld the bottom d) It is the most difficult area to radiograph

Last Answer : a) It is the most difficult area to weld

An air vessel is provided at the summit in a siphon to (A) Avoid interruption in the flow (B) Increase discharge (C) Increase velocity (D) Maintain pressure difference

Description : An air vessel is provided at the summit in a siphon to (A) Avoid interruption in the flow (B) Increase discharge (C) Increase velocity (D) Maintain pressure difference

Last Answer : Answer: Option A

State the effect of Water hammering effect in penstock of HPS and method to reduce it.

Description : State the effect of Water hammering effect in penstock of HPS and method to reduce it. 

Last Answer : Water hammering effect in penstock of HPS: When load on power plant or alternator decreases then Governor (valve) reduces discharge of water. Due to sudden reduction in water discharge causes ... helps by storing this rejected water immediately. In this way it avoids water hammer effect. 

What was your initial reaction to the transit-tunnel beating incident in Seattle?

Description : What was your initial reaction to the transit-tunnel beating incident in Seattle?

Last Answer : Time for a new security policy. I fully expect citizens to get involved in these situations.

Explain about penstock?

Description : Explain about penstock?

Last Answer : The pipe between surge tank and prime mover is known as penstock. It is designed to withstand high pressure. It is made up of reinforced concrete. In very cold areas, the penstock is buried to prevent ice formation and to reduce the expansion joints.

Explain about penstock?

Description : Explain about penstock?

Last Answer : The pipe between surge tank and prime mover is known as penstock. It is designed to withstand high pressure. It is made up of reinforced concrete. In very cold areas, the penstock is buried to prevent ice formation and to reduce the expansion joints.

Explain About Penstock?

Description : Explain About Penstock?

Last Answer : The pipe between surge tank and prime mover is known as penstock. It is designed to withstand high pressure. It is made up of reinforced concrete. In very cold areas, the penstock is buried to prevent ice formation and to reduce the expansion joints.

What is penstock? What is its function?

Description : What is penstock? What is its function?

Last Answer : What is Penstock:- The penstock is the long pipe line. It consists of heavy duty steel pipe.  Function of Penstock:- Function of penstock is to carry water from the water intake (reservoir) to turbine.

A single petrol tank supplies the petrol to the whole city, while the petrol tank is fed by a single pipeline filling the tank with the stream of uniform volume. When the petrol tank is full and if 20,000 litres of petrol is used daily, the supply fails in 45 days. If 16,000 litres of petrol is used daily, it fails in 30 days. How much petrol can be used daily without the supply every failing? a) 28000 b) 47000 c) 24000 d) 42000

Description : A single petrol tank supplies the petrol to the whole city, while the petrol tank is fed by a single pipeline filling the tank with the stream of uniform volume. When the petrol tank is full and if 20, ... petrol can be used daily without the supply every failing? a) 28000 b) 47000 c) 24000 d) 42000

Last Answer : A Let x litre be the per day filling and y litre be the capacity of the tank, then 45x + y = 20000 × 45 =900000…. (1) 30x + y = 16000 × 30 =480000…. (2) Solving eq. (1) and (2), we get 15x=420000 X=420000/15 x = 28000 Hence, 28000 litres per day can be used without the failure of supply

In case of a pipe exit fitted with a nozzle, the (A) Conversion of kinetic head to pressure head is facilitated (B) Conversion of pressure head to kinetic head is facilitated (C) Power transmitted through the nozzle is maximum, when the head lost due to friction in the pipe is equal to one third of the total supply head (D) Both (B) and (C)

Description : In case of a pipe exit fitted with a nozzle, the (A) Conversion of kinetic head to pressure head is facilitated (B) Conversion of pressure head to kinetic head is facilitated (C) Power transmitted through the nozzle ... in the pipe is equal to one third of the total supply head (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Sele(A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement. (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter

Silicon diodes designed for a specific reverse breakdown voltage, become useful as an electronic power supply voltage regulator, called _____________. A. tunnel diodes B. hot-carrier diodes C. compensating diodes D. Zener diodes

Description : Silicon diodes designed for a specific reverse breakdown voltage, become useful as an electronic power supply voltage regulator, called _____________. A. tunnel diodes B. hot-carrier diodes C. compensating diodes D. Zener diodes

Last Answer : Answer: D

The most effective arrangement for diverting excess storm water into a natural drainage, is A. Leaping weir B. Overflow weir C. Siphon spill way D. None of these

Description : The most effective arrangement for diverting excess storm water into a natural drainage, is A. Leaping weir B. Overflow weir C. Siphon spill way D. None of these

Last Answer : ANS: C

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

Surge tanks are provided in high pressure water pipelines to (A) Store a definite quantity of water all the time (B) Reduce the water hammer (C) Facilitate easy dismantling of pipeline for cleaning and maintenance (D) None of these

Description : Surge tanks are provided in high pressure water pipelines to (A) Store a definite quantity of water all the time (B) Reduce the water hammer (C) Facilitate easy dismantling of pipeline for cleaning and maintenance (D) None of these

Last Answer : (B) Reduce the water hammer

Water hammer in a pipeline results from the (A) Bursting of pipelines due to closure by a valve (B) Rapid pressure change due to a rapid change in the rate of flow (C) Pressure increase due to closure of a valve resulting in decrease in rate of flow (D) None of these

Description : Water hammer in a pipeline results from the (A) Bursting of pipelines due to closure by a valve (B) Rapid pressure change due to a rapid change in the rate of flow (C) Pressure increase due to closure of a valve resulting in decrease in rate of flow (D) None of these

Last Answer : (B) Rapid pressure change due to a rapid change in the rate of flow

Which of the following is used for regulated electric supply? (1) Zener diode (2) Junction diode (3) Gun diode (4) Tunnel diode

Description : Which of the following is used for regulated electric supply? (1) Zener diode (2) Junction diode (3) Gun diode (4) Tunnel diode

Last Answer : (1) Zener diode Explanation: The Zener diode is like a generalpurpose signal diode. When based in the forward direction it behaves just like a normal signal diode, but when a reverse voltage ... property. Many diodes described as "Zener" diodes rely instead on avalanche breakdown as the mechanism.

In the illustration, the component VR2 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to terminal 1 that controls the input to terminal 10 C. a zener diode that regulates the voltage to terminal 2 at 9.1 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Description : In the illustration, the component VR2 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to terminal ... 2 at 9.1 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Last Answer : Answer: C

In the illustration, the component VR1 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to terminal 9 that controls the input to terminal 10 C. a zener diode that regulates the voltage to terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Description : In the illustration, the component VR1 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to ... terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Last Answer : Answer: A

In the illustration, the component VR1 on the A1A1 PCB is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply B. a variable resistor diode to control the output to terminal 9 that controls the input to terminal 10 C. a zener diode that regulates the voltage to terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Description : In the illustration, the component VR1 on the A1A1 PCB is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply B. a variable resistor diode to control the output to terminal 9 that controls ... terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Last Answer : Answer: C

Which of the following is used for regulated electric supply ? (1) Zener diode (2) Junction diode (3) Gun diode (4) Tunnel diode

Description : Which of the following is used for regulated electric supply ? (1) Zener diode (2) Junction diode (3) Gun diode (4) Tunnel diode

Last Answer : Zener diode

Air valves are generally provided in pressure pipes of water supply (A) At pipe junctions (B) At summits (C) At low points (D) Near service pipes

Description : Air valves are generally provided in pressure pipes of water supply  (A) At pipe junctions  (B) At summits  (C) At low points  (D) Near service pipes 

Last Answer : (B) At summits 

If you had the ability to siphon money from someone just by touch, your hand must remain on them and you get 10k per minute of contact, who would you touch and how would you convince them to let you keep your hand on them?

Description : If you had the ability to siphon money from someone just by touch, your hand must remain on them and you get 10k per minute of contact, who would you touch and how would you convince them to let you keep your hand on them?

Last Answer : Start up a glory hole in a wealthy metropolitan area

The absorption of ink by blotting paper involves: A. Viscosity of ink B. Capillary action phenomenon C. Diffusion of ink through the blotting D. Siphon action

Description : The absorption of ink by blotting paper involves: A. Viscosity of ink B. Capillary action phenomenon C. Diffusion of ink through the blotting D. Siphon action

Last Answer : ANSWER: B

The absorption of ink by blotting paper involves (a) Viscosity of ink (b) Capillary action phenomenon (c) Diffusion of ink through the blotting (d) Siphon action

Description : The absorption of ink by blotting paper involves (a) Viscosity of ink (b) Capillary action phenomenon (c) Diffusion of ink through the blotting (d) Siphon action

Last Answer : Ans:(b)

The absorption of ink by blotting paper involves - (1) capillary action phenomenon (2) viscosity of ink (3) siphon action (4) diffusion of ink through the blotting

Description : The absorption of ink by blotting paper involves - (1) capillary action phenomenon (2) viscosity of ink (3) siphon action (4) diffusion of ink through the blotting

Last Answer : (1) capillary action phenomenon Explanation: The ability of a liquid to flow in narrow spaces without the assistance of, or even in opposition to, external forces like gravity.

The absorption of ink by blotting paper involves-----? A. Viscosity of ink B. Capillary action phenomenon (Answer) C. Diffusion of ink through the blotting D. Siphon action

Description : The absorption of ink by blotting paper involves-----? A. Viscosity of ink B. Capillary action phenomenon (Answer) C. Diffusion of ink through the blotting D. Siphon action

Last Answer : B. Capillary action phenomenon (Answer)

14. A siphon is used to connect two reservoirs at different levels intervened by a high ridge. A) True B) False

Description : 14. A siphon is used to connect two reservoirs at different levels intervened by a high ridge. A) True B) False

Last Answer : A