Maximum area of tension reinforcement shall not exceed [ A ] 0.02 bd [ B ] 0.02 bD [ C ] 0.04 bd [ D ] 0.04 bD

Maximum area of tension reinforcement shall not exceed
[ A ] 0.02 bd
[ B ] 0.02 bD
[ C ] 0.04 bd
[ D ] 0.04 bD
by

1 Answer

Answer :

[ D ] 0.04 bD
by

Related questions

Maximum area of compression reinforcement shall not exceed [ A ] 0.02 bd [ B ] 0.02 bD [ C ] 0.04 bd [ D ] 0.04 bD

Description : Maximum area of compression reinforcement shall not exceed [ A ] 0.02 bd [ B ] 0.02 bD [ C ] 0.04 bd [ D ] 0.04 bD

Last Answer : [ C ] 0.04 bd

The maximum area of tension reinforcement in beams shall not exceed (A) 0.15 % (B) 1.5 % (C) 4 % (D) 1 %

Description : The maximum area of tension reinforcement in beams shall not exceed (A) 0.15 % (B) 1.5 % (C) 4 % (D) 1 %

Last Answer : Answer: Option C

Side face reinforcement shall not exceed [ A ] 0.1% of total cross sectional area [ B ] 0.2% of total cross sectional area [ C ] 0.1% web area [ D ] 0.2 % web area.

Description : Side face reinforcement shall not exceed [ A ] 0.1% of total cross sectional area [ B ] 0.2% of total cross sectional area [ C ] 0.1% web area [ D ] 0.2 % web area.

Last Answer : [ C ] 0.1% web area

According to IS: 456-2000 Maximum spacing of shear reinforcement in no case shall not exceed [ A ] 250 mm [ B ] 300 mm [ C ] 350 mm [ D ] 450 mm

Description : According to IS: 456-2000 Maximum spacing of shear reinforcement in no case shall not exceed [ A ] 250 mm [ B ] 300 mm [ C ] 350 mm [ D ] 450 mm

Last Answer : [ B ] 300 mm

The maximum of spacing of side face reinforcement shall not exceed [ A ] 300 mm [ B ] Web thickness [ C ] Lesser of (a) and (b) [ D ] Greater of (a) and (b)

Description : The maximum of spacing of side face reinforcement shall not exceed [ A ] 300 mm [ B ] Web thickness [ C ] Lesser of (a) and (b) [ D ] Greater of (a) and (b)

Last Answer : [ C ] Lesser of (a) and (b)

In a limit state method of design, when shear reinforcement is not provided, the calculated shear stress at the critical section of a slab shall not exceed; [ A ] Ks 0.25 v fck [ B ] ks 0.20 v fck [ C ] ks 0.16 v fck [ D ] ks 0.10 v fck

Description : In a limit state method of design, when shear reinforcement is not provided, the calculated shear stress at the critical section of a slab shall not exceed; [ A ] Ks 0.25 v fck [ B ] ks 0.20 v fck [ C ] ks 0.16 v fck [ D ] ks 0.10 v fck

Last Answer : [ A ] Ks 0.25 v fck

The area is measured correct to the nearest (A) 0.01 sqm (B) 0.02 sqm (C) 0.03 sqm (D) 0.04 sqm

Description : The area is measured correct to the nearest (A) 0.01 sqm (B) 0.02 sqm (C) 0.03 sqm (D) 0.04 sqm

Last Answer : (A) 0.01 sqm

Which of the following statements is incorrect? (A) Minimum cross sectional area of longitudinal reinforcement in a column is 0.8% (B) Spacing of longitudinal bars measured along the periphery of column should not exceed 300 mm (C) Reinforcing bars in a column should not be less than 12 mm in diameter (D) The number of longitudinal bars provided in a circular column should not be less than four

Description : Which of the following statements is incorrect? (A) Minimum cross sectional area of longitudinal reinforcement in a column is 0.8% (B) Spacing of longitudinal bars measured along the periphery of ... (D) The number of longitudinal bars provided in a circular column should not be less than four

Last Answer : Answer: Option D

In slabs the Maximum horizontal distance between parallel main reinforcement should not exceed i.Three times effective depth ii Five times effective depth iii 300mm iv 450 mm [ A ] i and iii [ B ] i and iv [ C ] ii and iii [ D ] ii and iv

Description : In slabs the Maximum horizontal distance between parallel main reinforcement should not exceed i.Three times effective depth ii Five times effective depth iii 300mm iv 450 mm [ A ] i and iii [ B ] i and iv [ C ] ii and iii [ D ] ii and iv

Last Answer : [ A ] i and iii

A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff readings at and were 1.22 and 1.06. With the level set up at , the readings at and were 1.55 and 1.37. The collimation error per 100 m length of sight is (A) 0.02 m inclined upwards (B) 0.04 m inclined downwards (C) 0.04 m inclined upward (D) None of these

Description : A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff  readings at and were 1.22 and 1.06. With the level set up at , the readings at  and were 1.55 and ... upwards  (B) 0.04 m inclined downwards  (C) 0.04 m inclined upward  (D) None of these

Last Answer : (B) 0.04 m inclined downwards 

If D is the degree of a curve, the percentage reduction of gradient, is (A) 0.01 D (B) 0.02 D (C) 0.03 D (D) 0.04 D

Description : If D is the degree of a curve, the percentage reduction of gradient, is (A) 0.01 D (B) 0.02 D (C) 0.03 D (D) 0.04 D

Last Answer : Answer: Option D

The volume is measured correct to the nearest (A) 0.01 cum (B) 0.02 cum (C) 0.03 cum (D) 0.04 cum

Description : The volume is measured correct to the nearest (A) 0.01 cum (B) 0.02 cum (C) 0.03 cum (D) 0.04 cum

Last Answer : (A) 0.01 cum

Minimum percentage area of tension reinforcement , when the grade of steel is Fe-250 [ A ] 0.2 [ B ] 0.25 [ C ] 0.34 [ D ] 0.44

Description : Minimum percentage area of tension reinforcement , when the grade of steel is Fe-250 [ A ] 0.2 [ B ] 0.25 [ C ] 0.34 [ D ] 0.44

Last Answer : [ C ] 0.34

The area of side face reinforcement shall not be less than [ A ] 0.10 percent of the web area on each vertical face [ B ] 0.05 percent of the web area on each vertical face [ C ] 0.15 percent of the web area on each vertical face [ D ] 0.20 percent of the web area

Description : The area of side face reinforcement shall not be less than [ A ] 0.10 percent of the web area on each vertical face [ B ] 0.05 percent of the web area on each vertical face [ C ] 0.15 percent of the web area on each vertical face [ D ] 0.20 percent of the web area

Last Answer : [ B ] 0.05 percent of the web area on each vertical face

The Maximum spacing of Main reinforcement „m‟ slabs shall be [ A ] Less than three times of the effective depth [ B ] Less than 300mm [ C ] Smaller of (a) and (b) [ D ] Greater of (a) and (b)

Description : The Maximum spacing of Main reinforcement „m‟ slabs shall be [ A ] Less than three times of the effective depth [ B ] Less than 300mm [ C ] Smaller of (a) and (b) [ D ] Greater of (a) and (b)

Last Answer : [ C ] Smaller of (a) and (b)

In a slab, the pitch of the main reinforcement should not exceed its effective depth (A) Three times (B) Four times (C) Five times (D) Two times

Description : In a slab, the pitch of the main reinforcement should not exceed its effective depth (A) Three times (B) Four times (C) Five times (D) Two times

Last Answer : Answer: Option A

The pitch of bars of main reinforcement in slab should not exceed ________the effective depth of slab. (a) Double (b) Three times (c) Five times (d) Six times

Description : The pitch of bars of main reinforcement in slab should not exceed ________the effective depth of slab. (a) Double (b) Three times (c) Five times (d) Six times

Last Answer : (b) Three times

Consider the following statements: Maximum slenderness ratio of load-bearing masonry walls for a dwelling having more than two storeys shall not exceed. 1. 12, if lime mortar is used 2. 18, if cement-lime mortar 1:2:9 is used 3. 24, if cement mortar 1:6 is used\ Which of these statements are correct? (a) 1 and 2 only b) 2 and 3 only c) 1 and 3 only d)1, 2 and 3

Description : Consider the following statements: Maximum slenderness ratio of load-bearing masonry walls for a dwelling having more than two storeys shall not exceed. 1. 12, if lime mortar is used 2. 18, if cement-lime mortar 1:2:9 is used 3. 24, ... ? (a) 1 and 2 only b) 2 and 3 only c) 1 and 3 only d)1, 2 and 3

Last Answer : b) 2 and 3 only

Maximum slenderness ratio for load-bearing masonry wall in cement mortar, as per IS code, shall not exceed. (a) 13 (b) 20 (c) 27 (d) 30

Description : Maximum slenderness ratio for load-bearing masonry wall in cement mortar, as per IS code, shall not exceed. (a) 13 (b) 20 (c) 27 (d) 30

Last Answer : (c) 27

Safe and adequate daily dietary intake of chromium in adults in mg is (A) 0.01–0.02 (B) 0.02–0.03 (C) 0.03–0.04 (D) 0.05–0.2

Description : Safe and adequate daily dietary intake of chromium in adults in mg is (A) 0.01–0.02 (B) 0.02–0.03 (C) 0.03–0.04 (D) 0.05–0.2

Last Answer : Answer : D

Calculate the phase constant of a conductor with attenuation constant given by 0.04 units. a) 0.02 b) 0.08 c) 0.0016 d) 0.04

Description : Calculate the phase constant of a conductor with attenuation constant given by 0.04 units. a) 0.02 b) 0.08 c) 0.0016 d) 0.04

Last Answer : d) 0.04

Calculate the dipole moment of a dipole with equal charges 2C and -2C separated by a distance of 2cm. a) 0.02 b) 0.04 c) 0.06 d) 0.08

Description : Calculate the dipole moment of a dipole with equal charges 2C and -2C separated by a distance of 2cm. a) 0.02 b) 0.04 c) 0.06 d) 0.08

Last Answer : b) 0.04

Find the curl of the vector and state its nature at (1,1,-0.2) F = 30 i + 2xy j + 5xz 2 k a) √4.01 b) √4.02 c) √4.03 d) √4.04

Description : Find the curl of the vector and state its nature at (1,1,-0.2) F = 30 i + 2xy j + 5xz 2 k a) √4.01 b) √4.02 c) √4.03 d) √4.04

Last Answer : d) √4.04

The alcoholic content of **** is approximately _____. a. 0.02 b. 0.04 c. 0.06 d. 0.08

Description : The alcoholic content of beer is approximately _____. a. 0.02 b. 0.04 c. 0.06 d. 0.08

Last Answer : b. 0.04

A 3-phase 50HZ SCIM takes a power input of 30 KW at its full load speed of 1440 rpm. Total stator losses are 1 KW. The slip and rotor ohmic losses at full load are a) 0.02, 600 W b) 0.04, 580 W c) 0.04, 1160 W d) 0.04, 1200 W

Description : A 3-phase 50HZ SCIM takes a power input of 30 KW at its full load speed of 1440 rpm. Total stator losses are 1 KW. The slip and rotor ohmic losses at full load are a) 0.02, 600 W b) 0.04, 580 W c) 0.04, 1160 W d) 0.04, 1200 W

Last Answer : Ans: 0.04, 1160 W

What is Tony Lewis Update (02/04/2020 , 22:31) ?

Description : What is Tony Lewis Update (02/04/2020 , 22:31) ?

Last Answer : Tony Lewis, one of the inventors of the Darkworth -Lewis-Stern or DLS method, has died in a weather-affected limited-overs cricket match. The England and Wales Cricket Board (ECB) made ... awarded the fifth highest honors MBE in the British Empire for their contributions to cricket and mathematics.

What is Harbhajan Singh's update (02/04/2020 , 16:16) ?

Description : What is Harbhajan Singh's update (02/04/2020 , 16:16) ?

Last Answer : After saying goodbye to cricket, Shahid Afridi has joined himself in various developmental works of the society. He is helping poor people in Pakistan with antiseptic soap , relief supplies and food. His one-time rivals ... world. Let us pray to God for every human being. O Guru , bless us all. '

What is Dibala Update (02/04/2020 , 16:43) ?

Description : What is Dibala Update (02/04/2020 , 16:43) ?

Last Answer : Brazil and Argentina are the two eternal enemies in world football. But for the last decade, Portuguese superstar Cristiano Ronaldo has snatched Brazil's position. Because he is the main rival of Argentine ... in Argentina. He missed the World Cup and the Copa America for exactly the same reason.

10 mole of carbon contains A. 6.02 × 1024 atoms B. 6.03 × 1023 atoms C. 6.02 × 1023 atoms D. 6.04 × 1024 atoms

Description : 10 mole of carbon contains A. 6.02 × 1024 atoms B. 6.03 × 1023 atoms C. 6.02 × 1023 atoms D. 6.04 × 1024 atoms

Last Answer : 6.02 × 1024 atoms

f an Ethernet destination address is07:01:02:03:04:05, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Description : f an Ethernet destination address is07:01:02:03:04:05, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Last Answer : multicast

A cylinder contains oxygen at a pressure of 10 atm and a temperature of 300 K. The volume of the cylinder is 10 liters. What is the mass of the oxygen in grams? Molecular weight (MW) of oxygen is 32 g/mole?  a. 125.02  b. 130.08  c. 135.05  d. 120.04

Description : A cylinder contains oxygen at a pressure of 10 atm and a temperature of 300 K. The volume of the cylinder is 10 liters. What is the mass of the oxygen in grams? Molecular weight (MW) of oxygen is 32 g/mole?  a. 125.02  b. 130.08  c. 135.05  d. 120.04

Last Answer : 130.08 {(10atm)(10)(32)/(0.0821) (300K)}

79.93 × 35.02 -59.93 × 85.08 + 74.98 × 44.04 =? a) 1420 b) 1000 c) 1580 d) 870 e) 1260

Description : 79.93 × 35.02 -59.93 × 85.08 + 74.98 × 44.04 =? a) 1420 b) 1000 c) 1580 d) 870 e) 1260

Last Answer : ? ≈ 80 × 35-60 × 85 + 75 × 44 =2800 – 5100 + 3300 = 1000 Answer: b)

The shear reinforcement in R.C.C. is provided to resist (A) Vertical shear (B) Horizontal shear (C) Diagonal compression (D) Diagonal tension

Description : The shear reinforcement in R.C.C. is provided to resist (A) Vertical shear (B) Horizontal shear (C) Diagonal compression (D) Diagonal tension

Last Answer : Answer: Option D

The length of lap in tension reinforcement should not be less than the bar diameter × (actual tension / four times the permissible average bond stress) if it is more than (A) 18 bar diameters (B) 24 bar diameters (C) 30 bar diameters (D) 36 bar diameters

Description : The length of lap in tension reinforcement should not be less than the bar diameter × (actual tension / four times the permissible average bond stress) if it is more than (A) 18 bar diameters (B) 24 bar diameters (C) 30 bar diameters (D) 36 bar diameters

Last Answer : Answer: Option C

Shear resistance of concrete in a reinforced concrete beam is dependent on (a) Tension reinforcement in the beam (b) Compression reinforcement in the beam (c ) Shear reinforcement in the beam (d) None of the reinforcements in the beam

Description : Shear resistance of concrete in a reinforced concrete beam is dependent on (a) Tension reinforcement in the beam (b) Compression reinforcement in the beam (c ) Shear reinforcement in the beam (d) None of the reinforcements in the beam

Last Answer : (a) Tension reinforcement in the beam

Side face reinforcement shall be provided in the beam when depth of the web in a beam exceeds (A) 50 cm (B) 75 cm (C) 100 cm (D) 120 cm

Description : Side face reinforcement shall be provided in the beam when depth of the web in a beam exceeds (A) 50 cm (B) 75 cm (C) 100 cm (D) 120 cm

Last Answer : Answer: Option B

The maximum time lag between the primer coat and the Ist finishing coat shall not exceed a) 3 days b) 7 days* c) 4 days d) 12 days

Description : The maximum time lag between the primer coat and the Ist finishing coat shall not exceed a) 3 days b) 7 days* c) 4 days d) 12 days

Last Answer : b) 7 days*

The maximum time lag between surface preparation and the application of primer coat shall not exceed a) 12 hours b) 24 hours* c) 48 hours d) 36 hours

Description : The maximum time lag between surface preparation and the application of primer coat shall not exceed a) 12 hours b) 24 hours* c) 48 hours d) 36 hours

Last Answer : b) 24 hours*

For a ribbed slab (A) Clear spacing between ribs shall not be greater than 4.5 cm (B) Width of the rib shall not be less than 7.5 cm (C) Overall depth of the slab shall not exceed four times the breadth of the rib (D) All the above

Description : For a ribbed slab (A) Clear spacing between ribs shall not be greater than 4.5 cm (B) Width of the rib shall not be less than 7.5 cm (C) Overall depth of the slab shall not exceed four times the breadth of the rib (D) All the above

Last Answer : Answer: Option D

According to IS:456-1978, the spacing of stirrups shall not exceed a distance ______the leverarm of the resisting moment. (a) Equal to (b) Two times (c) Three times (d) All the above

Description : According to IS:456-1978, the spacing of stirrups shall not exceed a distance ______the leverarm of the resisting moment. (a) Equal to (b) Two times (c) Three times (d) All the above

Last Answer : (a) Equal to

The Pitch of helixes in circular columns shall not exceed [ A ] 25 mm [ B ] 50 mm [ C ] 60 mm [ D ] 75 mm

Description : The Pitch of helixes in circular columns shall not exceed [ A ] 25 mm [ B ] 50 mm [ C ] 60 mm [ D ] 75 mm

Last Answer : [ D ] 75 mm

For Unbraced column, the ratio of the clear height of the column to the minimum dimension of the column shall not exceed [ A ] 30 [ B ] 40 [ C ] 50 [ D ] 60

Description : For Unbraced column, the ratio of the clear height of the column to the minimum dimension of the column shall not exceed [ A ] 30 [ B ] 40 [ C ] 50 [ D ] 60

Last Answer : [ A ] 30

The heat of hydration for low heat cement at the age of 7 days shall not exceed [ A ] 80 cal / gm [ B ] 75 cal / gm [ C ] 70 cal / gm [ D ] 65 cal / gm

Description : The heat of hydration for low heat cement at the age of 7 days shall not exceed [ A ] 80 cal / gm [ B ] 75 cal / gm [ C ] 70 cal / gm [ D ] 65 cal / gm

Last Answer : [ D ] 65 cal / gm

In fineness test on cement, residue left on I.S. sieve no.9 shall not exceed __________ by weight of the sample of cement [ A ] 5% [ B ] 10% [ C ] 15% [ D ] 20%

Description : In fineness test on cement, residue left on I.S. sieve no.9 shall not exceed __________ by weight of the sample of cement [ A ] 5% [ B ] 10% [ C ] 15% [ D ] 20%

Last Answer : [ B ] 10%

In Portland Blast furnace slag cement, the blast furnace slag content shall not exceed [ A ] 50% [ B ] 65% [ C ] 80% [ D ] 90%

Description : In Portland Blast furnace slag cement, the blast furnace slag content shall not exceed [ A ] 50% [ B ] 65% [ C ] 80% [ D ] 90%

Last Answer : [ B ] 65%

Maximum size of clay particles is: (A) 0.002 mm (B) 0.04 mm (C) 0.06 mm (D) 0.08 mm

Description : Maximum size of clay particles is: (A) 0.002 mm (B) 0.04 mm (C) 0.06 mm (D) 0.08 mm

Last Answer : (A) 0.002 mm

Mark the correct option a) Non-attendance in obedience to an order from public servant shall be punished with simple imprisonment for a term which may extend to one month, or with fine which may extend to five hundred rupees, or with both b) Non appearance in response to a proclamation under section 82 shall be punished with imprisonment for a term which may extend to 3 year or with fine or bothc) Both the A and Bd) Neither A nor B

Description : Mark the correct option a) Non-attendance in obedience to an order from public servant shall be punished  with simple imprisonment for a term which may extend to one month, or with fine  which may extend to five hundred ... to 3 year or with fine or both c) Both the A and B d) Neither A nor B

Last Answer : c) Both the A and B

Mr. Kapoor has Bb autosomal gene pair and d allele sex-linked. What shall be proportion of Bd in sperms? (a) Zero (b) 1/2 (c) 1/4 (d) 1/8

Description : Mr. Kapoor has Bb autosomal gene pair and d allele sex-linked. What shall be proportion of Bd in sperms? (a) Zero (b) 1/2 (c) 1/4 (d) 1/8

Last Answer : (c) 1/4

Maximum allowable spacing of shear reinforcement for inclined stirrups with an inclination of 45° is restricted to [ A ] 0.75 d [ B ] 0.45 d [ C ] 0.90 d [ D ] d

Description : Maximum allowable spacing of shear reinforcement for inclined stirrups with an inclination of 45° is restricted to [ A ] 0.75 d [ B ] 0.45 d [ C ] 0.90 d [ D ] d

Last Answer : [ D ] d

Maximum allowable spacing of shear reinforcement for vertical stirrups is restricted to [ A ] d [ B ] 0.45 d [ C ] 0.75 d [ D ] 0.90 d

Description : Maximum allowable spacing of shear reinforcement for vertical stirrups is restricted to [ A ] d [ B ] 0.45 d [ C ] 0.75 d [ D ] 0.90 d

Last Answer : [ C ] 0.75 d