Maximum size of clay particles is: (A) 0.002 mm (B) 0.04 mm (C) 0.06 mm (D) 0.08 mm

Maximum size of clay particles is:
(A) 0.002 mm
(B) 0.04 mm
(C) 0.06 mm
(D) 0.08 mm
by

1 Answer

Answer :

(A) 0.002 mm
by

Related questions

Minimum size of the particles of silt soil, is (A) 0.002 mm (B) 0.04 mm (C) 0.06 mm (D) 0.08 mm

Description : Minimum size of the particles of silt soil, is (A) 0.002 mm (B) 0.04 mm (C) 0.06 mm (D) 0.08 mm

Last Answer : (A) 0.002 mm

Pick up the correct statement from the following: (A) The maximum size of a coarse aggregate, is 75 mm and minimum 4.75 mm (B) The maximum size of the fine aggregate, is 4.75 mm and minimum 0.075 mm (C) The material having particles of size varying from 0.06 mm to 0.002 mm, is known as silt (D) All the ab

Description : Pick up the correct statement from the following: (A) The maximum size of a coarse aggregate, is 75 mm and minimum 4.75 mm (B) The maximum size of the fine aggregate, is 4.75 mm and minimum 0.075 mm ( ... having particles of size varying from 0.06 mm to 0.002 mm, is known as silt (D) All the ab

Last Answer : Answer: Option D

Particles of 0.002 mm size are that of (A) Clay (B) Sand (C) Gravel (D) None of these

Description : Particles of 0.002 mm size are that of (A) Clay (B) Sand (C) Gravel (D) None of these

Last Answer : Answer: Option A

The size of clay particles are— (A) 1•0 mm (B) 0•2 – 0•02 mm (C) < 0•02 mm (D) < 0•002 mm

Description : The size of clay particles are— (A) 1•0 mm (B) 0•2 – 0•02 mm (C) < 0•02 mm (D) < 0•002 mm

Last Answer : (D) < 0•002 mm

According to IS classification, the range of silt size particles is (A) 4.75 mm to 2.00 mm (B) 2.00 mm to 0.425 mm (C) 0.425 mm to 0.075 mm (D) 0.075 mm to 0.002 mm

Description : According to IS classification, the range of silt size particles is (A) 4.75 mm to 2.00 mm (B) 2.00 mm to 0.425 mm (C) 0.425 mm to 0.075 mm (D) 0.075 mm to 0.002 mm

Last Answer : (D) 0.075 mm to 0.002 mm

Calculate the dipole moment of a dipole with equal charges 2C and -2C separated by a distance of 2cm. a) 0.02 b) 0.04 c) 0.06 d) 0.08

Description : Calculate the dipole moment of a dipole with equal charges 2C and -2C separated by a distance of 2cm. a) 0.02 b) 0.04 c) 0.06 d) 0.08

Last Answer : b) 0.04

The alcoholic content of **** is approximately _____. a. 0.02 b. 0.04 c. 0.06 d. 0.08

Description : The alcoholic content of beer is approximately _____. a. 0.02 b. 0.04 c. 0.06 d. 0.08

Last Answer : b. 0.04

Indicate the number of Regional Offices of National Council of Teacher Education. (A) 04 (B) 05 (C) 06 (D) 08

Description : Indicate the number of Regional Offices of National Council of Teacher Education. (A) 04 (B) 05 (C) 06 (D) 08

Last Answer : Answer: A 

The diameter of very fine sand particles is- (a) Below 0.002 mm (b) 0.05-0.002mm (c) 0.01-0.05 mm (d) 0.05-0.10mm

Description : The diameter of very fine sand particles is- (a) Below 0.002 mm (b) 0.05-0.002mm (c) 0.01-0.05 mm (d) 0.05-0.10mm

Last Answer : (c) 0.01-0.05 mm

Stoke's law does not hold good if the size of particle is smaller than (A) 0.0002 mm (B) 0.002 mm (C) 0.02 mm (D) 0.2 mm

Description : Stoke's law does not hold good if the size of particle is smaller than (A) 0.0002 mm (B) 0.002 mm (C) 0.02 mm (D) 0.2 mm

Last Answer : (A) 0.0002 mm

A rolled steel joist is simply supported at its ends and carries a uniformly distributed load which causes a maximum deflection of 10 mm and slope at the ends of 0.002 radian. The length of the joist will be, (A) 10 m (B) 12 m (C) 14 m (D) 16 m

Description : A rolled steel joist is simply supported at its ends and carries a uniformly distributed load which  causes a maximum deflection of 10 mm and slope at the ends of 0.002 radian. The length of the  joist will be,  (A) 10 m  (B) 12 m  (C) 14 m  (D) 16 m 

Last Answer : (D) 16 m 

A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff readings at and were 1.22 and 1.06. With the level set up at , the readings at and were 1.55 and 1.37. The collimation error per 100 m length of sight is (A) 0.02 m inclined upwards (B) 0.04 m inclined downwards (C) 0.04 m inclined upward (D) None of these

Description : A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff  readings at and were 1.22 and 1.06. With the level set up at , the readings at  and were 1.55 and ... upwards  (B) 0.04 m inclined downwards  (C) 0.04 m inclined upward  (D) None of these

Last Answer : (B) 0.04 m inclined downwards 

The settling velocity of the particles larger than 0.06 mm in a settling tank of depth 2.4 is 0.33 m per sec. The detention period recommended for the tank, is A. 30 minutes B. 1 hour C. 1 hour and 30 minutes D. 2 hours

Description : The settling velocity of the particles larger than 0.06 mm in a settling tank of depth 2.4 is 0.33 m per sec. The detention period recommended for the tank, is A. 30 minutes B. 1 hour C. 1 hour and 30 minutes D. 2 hours

Last Answer : ANS: D

Pick up the correct statement about silt soil from the following: (A) The silt soil has particle size from 0.02 mm to 0.06 mm (B) In organic fine grained silt soil possesses no plasticity (C) The least plastic type normally consists of more or less equidimensional grains of quartz (D) All the above

Description : Pick up the correct statement about silt soil from the following: (A) The silt soil has particle size from 0.02 mm to 0.06 mm (B) In organic fine grained silt soil possesses no ... The least plastic type normally consists of more or less equidimensional grains of quartz (D) All the above

Last Answer : Answer: Option D

2.5 x 0.08 ÷ (1.9)^2= ? a) 2.5 b) 1.2 c) 0.008 d) 0.06 e) 0.03

Description : 2.5 x 0.08 ÷ (1.9)^2= ? a) 2.5 b) 1.2 c) 0.008 d) 0.06 e) 0.03

Last Answer : 2.5 × 0.08 ÷ (1.9)^2 = ? = 2.5 × 0.08/3.61 = ? = 0.0554 = 0.06 (approx) Answer: d)

A straight wire of length 0.20 m moves at a steady speed of 3.0 m s-1 at right angles to the magnetic field of flux density 0.10 T. The e.m.f induced across ends of wire is A. 0.5 V B. 0.06 V C. 0.05 V D. 0.04 V

Description : A straight wire of length 0.20 m moves at a steady speed of 3.0 m s-1 at right angles to the magnetic field of flux density 0.10 T. The e.m.f induced across ends of wire is A. 0.5 V B. 0.06 V C. 0.05 V D. 0.04 V

Last Answer : 0.06 V

Calculate damping ratio if mass = 200Kg, ω = 20rad/s and damping coefficient = 800 N/m/s A. 0.03 B. 0.04 C. 0.05 D. 0.06

Description : Calculate damping ratio if mass = 200Kg, ω = 20rad/s and damping coefficient = 800 N/m/s A. 0.03 B. 0.04 C. 0.05 D. 0.06

Last Answer : A. 0.03

Calculate damping ratio from the following data: mass = 200Kg ω = 20rad/s damping coefficient = 1000 N/m/s a) 0.03 b) 0.04 c) 0.05 d) 0.06

Description : Calculate damping ratio from the following data: mass = 200Kg ω = 20rad/s damping coefficient = 1000 N/m/s a) 0.03 b) 0.04 c) 0.05 d) 0.06

Last Answer : b) 0.04

Calculate damping ratio from the following data: mass = 200Kg ω = 20rad/s damping coefficient = 800 N/m/s a) 0.03 b) 0.04 c) 0.05 d) 0.06

Description : Calculate damping ratio from the following data: mass = 200Kg ω = 20rad/s damping coefficient = 800 N/m/s a) 0.03 b) 0.04 c) 0.05 d) 0.06

Last Answer : a) 0.03

A neon flashlight cell with an emf of 1.5V gives a current of 15A when connected directly to an ammeter of resistance 0.04?. Internal resistance of the cell is a. 0.0004? b. 0.06? c. 0.10? d. 0.13?

Description : A neon flashlight cell with an emf of 1.5V gives a current of 15A when connected directly to an ammeter of resistance 0.04?. Internal resistance of the cell is a. 0.0004? b. 0.06? c. 0.10? d. 0.13?

Last Answer : b. 0.06?

A 400kW, 3-phase, 440V, 50Hz induction motor has a speed of 950 r.p.m. on fullload. The machine has 6 poles. The slip of the machine will be _______________. (A) 0.06 (B) 0.10 (C) 0.04 (D) 0.05

Description : A 400kW, 3-phase, 440V, 50Hz induction motor has a speed of 950 r.p.m. on fullload. The machine has 6 poles. The slip of the machine will be _______________. (A) 0.06 (B) 0.10 (C) 0.04 (D) 0.05

Last Answer : Ans: D N = Ns (1-S) 950 = 120 x 50 (1-S)/6 S = 0.05

The percentage of fluoride present in normal bone is (A) 0.01–0.03 (B) 0.04–0.08 (C) 0.10–0.12 (D) 0.15–0.2

Description : The percentage of fluoride present in normal bone is (A) 0.01–0.03 (B) 0.04–0.08 (C) 0.10–0.12 (D) 0.15–0.2

Last Answer : Answer : A

Calculate the phase constant of a conductor with attenuation constant given by 0.04 units. a) 0.02 b) 0.08 c) 0.0016 d) 0.04

Description : Calculate the phase constant of a conductor with attenuation constant given by 0.04 units. a) 0.02 b) 0.08 c) 0.0016 d) 0.04

Last Answer : d) 0.04

A saturated soil sample has water content of 40% and specific gravity of soil particles 2.7. The void ratio of the soil, is (A) 0.4 (B) 0.52 (C) 1.08 (D) None of these

Description : A saturated soil sample has water content of 40% and specific gravity of soil particles 2.7. The void ratio of the soil, is (A) 0.4 (B) 0.52 (C) 1.08 (D) None of these

Last Answer : (C) 1.08

Safe to take Pure Compounded Hydrocodone Bitartrate, which was filled on 10/08/12, and expired on 02/06/13? NO Preservatives!

Description : Safe to take Pure Compounded Hydrocodone Bitartrate, which was filled on 10/08/12, and expired on 02/06/13? NO Preservatives!

Last Answer : I'm not a doctor, nor am I a pharmacist, but my first thought was NO! Do not take them. Meds have an expiration date for a reason. I've heard that the chemicals in medication change over time ... them away. Better safe than sorry. I know it sucks to waste money, but your health is more important.

It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of vaporisation is 2100 kJ/kg and the specific heat of the solution is 4 kJ/kg.K. The rate at which the heat has to be supplied in (kJ/min) to the evaporator is (A) 3.06 × 10 5 (B) 6.12 × 10 5 (C) 7.24 × 10 5 (D) 9.08 × 10

Description : It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of ... 3.06 10 5 (B) 6.12 10 5 (C) 7.24 10 5 (D) 9.08 10

Last Answer : (A) 3.06 × 10

National innovationproject was started in the yeara.2005-06 b.2007-08 c.2009-10 d.2011-12

Description : National innovationproject was started in the yeara.2005-06 b.2007-08 c.2009-10 d.2011-12

Last Answer : a.2005-06

The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm. (A) 0.001 (B) 0.01 (C) 0.002 (D) 0.02

Description : The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm. (A) 0.001 (B) 0.01 (C) 0.002 (D) 0.02

Last Answer : Option C

Consider a project with the following functional units : Number of user inputs = 50 Number of user outputs = 40 Number of user enquiries = 35 Number of user files = 06 Number of external interfaces = 04 Assuming all complexity adjustment factors and weighing factors as average, the function points for the project will be (A) 135 (B) 722 (C) 675 (D) 672

Description : Consider a project with the following functional units : Number of user inputs = 50 Number of user outputs = 40 Number of user enquiries = 35 Number of user files = 06 Number of external interfaces = 04 ... average, the function points for the project will be (A) 135 (B) 722 (C) 675 (D) 672

Last Answer : (D) 672

If a solid shaft (diameter 20 cm, length 400 cm, N = 0.8 × 105 N/mm2 ) when subjected to a twisting moment, produces maximum shear stress of 50 N/mm2 , the angle of twist in radians, is (A) 0.001 (B) 0.002 (C) 0.0025 (D) 0.003

Description : If a solid shaft (diameter 20 cm, length 400 cm, N = 0.8 × 105  N/mm2 ) when subjected to a twisting  moment, produces maximum shear stress of 50 N/mm2 , the angle of twist in radians, is  (A) 0.001  (B) 0.002  (C) 0.0025  (D) 0.003 

Last Answer : (C) 0.0025 

If the viscosity of ground water is 1.00, the Slitcher's constant is 400, the effective size of soil particles in aquifer is 0.5 mm and hydraulic gradient is 1 in 80, the velocity of flow is (A) 0.25 m/day (B) 0.50 m/day (C) 1.00 m/day (D) 1.25 m/day

Description : If the viscosity of ground water is 1.00, the Slitcher's constant is 400, the effective size of soil particles in aquifer is 0.5 mm and hydraulic gradient is 1 in 80, the velocity of flow is (A) 0.25 m/day (B) 0.50 m/day (C) 1.00 m/day (D) 1.25 m/day

Last Answer : Answer: Option D

A coil is wound with 200 feet of No. 16 tinned copper wire and connected to a 12 volt battery. What is the current if the resistance per 1000 feet of No. 16 tinned copper wire is 4.26 ohms? A. 1.14 amps B. 7.04 amps C. 10.22 amps D. 14.08 amps

Description : A coil is wound with 200 feet of No. 16 tinned copper wire and connected to a 12 volt battery. What is the current if the resistance per 1000 feet of No. 16 tinned copper wire is 4.26 ohms? A. 1.14 amps B. 7.04 amps C. 10.22 amps D. 14.08 amps

Last Answer : Answer: D

The NSC introduced from a) 08-05-1989 b) 01-04-1988 c) 01-04-1990 d) None of these

Description : The NSC introduced from a) 08-05-1989 b) 01-04-1988 c) 01-04-1990 d) None of these 

Last Answer : a) 08-05-1989

From ----------- the accounts work relating to the postal branch of the P& T department was separated from P& T audit a. 01.04.1977 b.01.04.1976 c. 01.08.1980

Description : From ----------- the accounts work relating to the postal branch of the P& T department was separated from P& T audit a. 01.04.1977 b.01.04.1976 c. 01.08.1980

Last Answer : b.01.04.1976

A cylinder contains oxygen at a pressure of 10 atm and a temperature of 300 K. The volume of the cylinder is 10 liters. What is the mass of the oxygen in grams? Molecular weight (MW) of oxygen is 32 g/mole?  a. 125.02  b. 130.08  c. 135.05  d. 120.04

Description : A cylinder contains oxygen at a pressure of 10 atm and a temperature of 300 K. The volume of the cylinder is 10 liters. What is the mass of the oxygen in grams? Molecular weight (MW) of oxygen is 32 g/mole?  a. 125.02  b. 130.08  c. 135.05  d. 120.04

Last Answer : 130.08 {(10atm)(10)(32)/(0.0821) (300K)}

79.93 × 35.02 -59.93 × 85.08 + 74.98 × 44.04 =? a) 1420 b) 1000 c) 1580 d) 870 e) 1260

Description : 79.93 × 35.02 -59.93 × 85.08 + 74.98 × 44.04 =? a) 1420 b) 1000 c) 1580 d) 870 e) 1260

Last Answer : ? ≈ 80 × 35-60 × 85 + 75 × 44 =2800 – 5100 + 3300 = 1000 Answer: b)

On Ashok marg, three consecutive traffic lights change after 36, 42 and 72 seconds respectively. If the lights are switched on at 9.00 A.M sharp, at what time will they change simultaneously? a) 9 :08 :44 b) 9:08:24 c) 9:08:04 d) 9:08:34

Description : On Ashok marg, three consecutive traffic lights change after 36, 42 and 72 seconds respectively. If the lights are switched on at 9.00 A.M sharp, at what time will they change simultaneously? a) 9 :08 :44 b) 9:08:24 c) 9:08:04 d) 9:08:34

Last Answer : b) 9:08:24

Justify use of tool inserts. State the materials used for inserts. Identify the parameters of insert designated as C – N – M – G – 12 – 04 – 08 as per ISO

Description : Justify use of tool inserts. State the materials used for inserts. Identify the parameters of insert designated as C – N – M – G – 12 – 04 – 08 as per ISO

Last Answer : Justification of tool inserts: The tools with indexible inserts of harder and special grade carbide or ceramic materials. A wear resistant layer of Titanium nitride of Titanium carbide is coated on the ... Symbol for tolerance 08: Turning insert nose radius G: symbol for fixing for chip breaker

A simply supported beam carries uniformly distributed load of 20 kN/m over the length of 5 m. If flexural rigidity is 30000 kN.m2, what is the maximum deflection in the beam? a. 5.4 mm b. 1.08 mm c. 6.2 mm d. 8.6 mm

Description : A simply supported beam carries uniformly distributed load of 20 kN/m over the length of 5 m. If flexural rigidity is 30000 kN.m2, what is the maximum deflection in the beam? a. 5.4 mm b. 1.08 mm c. 6.2 mm d. 8.6 mm

Last Answer : a. 5.4 mm

If the permeability of a soil is 0.8 mm/sec, the type of soil is (A) Gravel (B) Sand (C) Silt (D) Clay

Description : If the permeability of a soil is 0.8 mm/sec, the type of soil is (A) Gravel (B) Sand (C) Silt (D) Clay

Last Answer : (B) Sand

Which of the following is the correct order of increasing size of the grains of soil particles? 1. Clay 2. Silt 3. Sand 4. Gravel (a) BCDA (b) ABCD (c) DCBA (d) ADCB

Description : Which of the following is the correct order of increasing size of the grains of soil particles? 1. Clay 2. Silt 3. Sand 4. Gravel (a) BCDA (b) ABCD (c) DCBA (d) ADCB

Last Answer : Ans: (b)

The thickness of metallic shielding on cables is usually (a) 0.04 mm (b) 0.2 to 0.4 mm (e) 3 to 5 mm (d) 40 to 60 mm

Description : The thickness of metallic shielding on cables is usually (a) 0.04 mm (b) 0.2 to 0.4 mm (e) 3 to 5 mm (d) 40 to 60 mm

Last Answer : (a) 0.04 mm

Threshold limit value (TLV) means maximum permissible/acceptable concentration. TLV of phosgene in air is about __________ ppm (parts per million). (A) 0.002 (B) 0.2 (C) 1.2 (D) 4.8

Description : Threshold limit value (TLV) means maximum permissible/acceptable concentration. TLV of phosgene in air is about __________ ppm (parts per million). (A) 0.002 (B) 0.2 (C) 1.2 (D) 4.8

Last Answer : (B) 0.2

Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determined for wet grinding should be multiplied with __________ to get the same for dry grinding. (A) 1.0 (B) 0.5 (C) 1.34 (D) 4.34

Description : Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determined for wet grinding should ... to get the same for dry grinding. (A) 1.0 (B) 0.5 (C) 1.34 (D) 4.34

Last Answer : (C) 1.34

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below : Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, the minimum fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle ... fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Last Answer : (B) 16 mm/s

The soil which contains finest grain particles, is (A) Coarse sand (B) Fine sand (C) Silt (D) Clay

Description : The soil which contains finest grain particles, is (A) Coarse sand (B) Fine sand (C) Silt (D) Clay

Last Answer : (D) Clay

The admixture of coarser particles like sand or silt to clay causes (A) Decrease in liquid limit and increase in plasticity index (B) Decrease in liquid limit and no change in plasticity index (C) Decrease in both liquid limit and plasticity index (D) Increase in both liquid limit and plasticity index

Description : The admixture of coarser particles like sand or silt to clay causes (A) Decrease in liquid limit and increase in plasticity index (B) Decrease in liquid limit and no change in plasticity index ... in both liquid limit and plasticity index (D) Increase in both liquid limit and plasticity index

Last Answer : Answer: Option C

When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the permeability of the soil, is (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Description : When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the ... (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Last Answer : Answer: Option B

The ultimate failure is assumed to be reached when the section reaches a uniform compression strain of [ A ] 0.002 [ B ] 0.0035 [ C ] 0.0045 [ D ] 0.005

Description : The ultimate failure is assumed to be reached when the section reaches a uniform compression strain of [ A ] 0.002 [ B ] 0.0035 [ C ] 0.0045 [ D ] 0.005

Last Answer : [ A ] 0.002