The yield line ultimate moment is obtained when the yield line is --------------- to the direction of the reinforcement [ A ] Parallel [ B ] At right angles. [ C ] Passes through [ D ] Crosses at an angle of 45°

The yield line ultimate moment is obtained when the yield line is --------------- to the direction of the reinforcement
[ A ] Parallel
[ B ] At right angles.
[ C ] Passes through
[ D ] Crosses at an angle of 45°
by

1 Answer

Answer :

[ B ] At right angles.
by

Related questions

The direction of steepest slope on a contour, is (A) Along the contour (B) At an angle of 45° to the contour (C) At right angles to the contour (D) None of these

Description : The direction of steepest slope on a contour, is (A) Along the contour (B) At an angle of 45° to the contour (C) At right angles to the contour (D) None of these

Last Answer : (C) At right angles to the contour

In stone masonry, stones (stratified rocks) are so placed that the direction of pressure to the plane of bedding is (A) Right angles (B) 45° (C) 60° (D) Paralle

Description : In stone masonry, stones (stratified rocks) are so placed that the direction of pressure to the plane of bedding is (A) Right angles (B) 45° (C) 60° (D) Paralle

Last Answer : Answer: Option A

For the manufacture of plywood, veneers are placed so that grains of adjacent veneers (A) Run at right angles (B) Parallel (C) Inclined at 45° (D) Inclined at 60°

Description : For the manufacture of plywood, veneers are placed so that grains of adjacent veneers (A) Run at right angles (B) Parallel (C) Inclined at 45° (D) Inclined at 60°

Last Answer : Answer: Option A

For determining the support reactions at A and B of a three hinged arch, points B and Care joined and produced to intersect the load line at D and a line parallel to the load line through A at D'. Distances AD, DD' and AD' when measured were 4 cm, 3 cm and 5 cm respectively. The angle between the reactions at A and B is (A) 30° (B) 45° (C) 60° (D) 90

Description : For determining the support reactions at A and B of a three hinged arch, points B and Care joined  and produced to intersect the load line at D and a line parallel to the load line through A at D'.  Distances AD, DD ... reactions at A and B is  (A) 30°  (B) 45°  (C) 60°  (D) 90

Last Answer : (D) 90

The slab is said to be orthotropically reinforced , when the reinforcement is arranged in; [ A ] Single direction [ B ] Two directions at right angles with equal meshes [ C ] Two directions at right angles with unequal meshes [ D ] At the corners only

Description : The slab is said to be orthotropically reinforced , when the reinforcement is arranged in; [ A ] Single direction [ B ] Two directions at right angles with equal meshes [ C ] Two directions at right angles with unequal meshes [ D ] At the corners only

Last Answer : [ C ] Two directions at right angles with unequal meshes

Pick up the correct statement from the following: Method of sawing timber (A) Tangentially to annual rings, is known as tangential method (B) In four quarters such that each board cuts annual rings at angles not less than 45°, is known as quarter sawing method (C) Cut out of quarter logs, parallel to the medullary rays and perpendicular to annual rings, is known as radial sawing (D) All the above

Description : Pick up the correct statement from the following: Method of sawing timber (A) Tangentially to annual rings, is known as tangential method (B) In four quarters such that each board cuts annual rings ... medullary rays and perpendicular to annual rings, is known as radial sawing (D) All the above

Last Answer : Answer: Option D

If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for (A) Horizontal sights (B) Inclined sights upward (C) Inclined sight downward (D) None of these

Description : If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for (A) Horizontal sights (B) Inclined sights upward (C) Inclined sight downward (D) None of these

Last Answer : (A) Horizontal sights

According to Newton's 2nd law the object's acceleration and centripetal force are A. at right angles to each other B. anti parallel to each other C. make acute angle with each other D. in same direction

Description : According to Newton's 2nd law the object's acceleration and centripetal force are A. at right angles to each other B. anti parallel to each other C. make acute angle with each other D. in same direction

Last Answer : in same direction

Maximum number of vehicles can be parked with (A) Parallel parking (B) 30° angle parking (C) 45° angle parking (D) 90° angle parking

Description : Maximum number of vehicles can be parked with (A) Parallel parking (B) 30° angle parking (C) 45° angle parking (D) 90° angle parking

Last Answer : Answer: Option D

When the width of car parking space and width of street are limited, generally preferred parking system is (A) Parallel parking (B) 45° angle parking (C) 65° angle parking (D) 90° angle parking

Description : When the width of car parking space and width of street are limited, generally preferred parking system is (A) Parallel parking (B) 45° angle parking (C) 65° angle parking (D) 90° angle parking

Last Answer : Answer: Option A

A train travelling at 36 kmph completely crosses another train having half its length and travelling in the opposite direction at 54 kmph, in 12 seconds. If it also passes a railway platform in 112 minutes, the length of the platform is : a) 560 metres b) 620 metres c) 700 meres d) 750 metres e) 720 meters

Description : A train travelling at 36 kmph completely crosses another train having half its length and travelling in the opposite direction at 54 kmph, in 12 seconds. If it also passes a railway platform in 112 minutes, the length ... is : a) 560 metres b) 620 metres c) 700 meres d) 750 metres e) 720 meters

Last Answer : Answer: c)

A passenger train travelling at 96 kmph completely crosses another train having half its length and travelling in opposite direction at 84 kmph, in 24 seconds. It also passes a railway platform in 90 seconds. The length of the platform is A) 1250 m B) 2258m C) 1600 m D) 3725m

Description : A passenger train travelling at 96 kmph completely crosses another train having half its length and travelling in opposite direction at 84 kmph, in 24 seconds. It also passes a railway platform in 90 seconds. The length of the platform is A) 1250 m B) 2258m C) 1600 m D) 3725m

Last Answer :  ANSWER:C  Explanation:  Let the length of the first train be x metres  Then, is x /2metres  Relative speed = (96+84)kmph  = 180 kmph  Convert km/hr into m/s,  = 180*5/18  = 50 m/s  Therefore (x ...  (800+y) = 90*480/18  y = 2400- 800  = 1600  Hence, the length of the platform is 1600 m

An R.C.C. beam not provided with shear reinforcement may develop cracks in its bottom inclined roughly to the horizontal at (A) 25° (B) 35° (C) 45° (D) 55°

Description : An R.C.C. beam not provided with shear reinforcement may develop cracks in its bottom inclined roughly to the horizontal at (A) 25° (B) 35° (C) 45° (D) 55°

Last Answer : Answer: Option C

Maximum allowable spacing of shear reinforcement for inclined stirrups with an inclination of 45° is restricted to [ A ] 0.75 d [ B ] 0.45 d [ C ] 0.90 d [ D ] d

Description : Maximum allowable spacing of shear reinforcement for inclined stirrups with an inclination of 45° is restricted to [ A ] 0.75 d [ B ] 0.45 d [ C ] 0.90 d [ D ] d

Last Answer : [ D ] d

When a load crosses a through type Pratt truss in the direction left to right, the nature of force in any diagonal member in the left half of the span would (A) Change from compression to tension (B) Change from tension to compression (C) Always be compression (D) Always be tension

Description : When a load crosses a through type Pratt truss in the direction left to right, the nature of force in any diagonal member in the left half of the span would (A) Change from compression to tension (B) Change from tension to compression (C) Always be compression (D) Always be tension

Last Answer : (A) Change from compression to tension

The zone in which transverse bending is likely to occur may be obtained by drawing a line from the (A) 30° (B) 45° (C) 60° (D) None of these

Description : The zone in which transverse bending is likely to occur may be obtained by drawing a line from the (A) 30° (B) 45° (C) 60° (D) None of these

Last Answer : Answer: Option B

0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre(B) In the standard rolled channels, the shear centre is on the horizontal line passing through and away from the C.G. beyond web (C) In equal angles, the shear centre is on the horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Description : 0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre (B) In the standard rolled channels, the shear centre ... horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Last Answer : (D) All the above

01. Whenever a plate is held immersed at some angle with the direction of flow of the liquid, it is subjected to some pressure. The component of this pressure, at right angles to the direction of flow of the liquid is known as lift. A) True B) False

Description : 01. Whenever a plate is held immersed at some angle with the direction of flow of the liquid, it is subjected to some pressure. The component of this pressure, at right angles to the direction of flow of the liquid is known as lift. A) True B) False

Last Answer : A

The transverse reinforcements provided at right angles to the main reinforcement (A) Distribute the load (B) Resist the temperature stresses (C) Resist the shrinkage stress (D) All the above

Description : The transverse reinforcements provided at right angles to the main reinforcement (A) Distribute the load (B) Resist the temperature stresses (C) Resist the shrinkage stress (D) All the above

Last Answer : Answer: Option D

The transverse reinforcements provided at right angles to the main reinforcement. (a) To distribute the load. (b) To resist the temp stresses (c) To resist the shrinkage stresses (d) All the above

Description : The transverse reinforcements provided at right angles to the main reinforcement. (a) To distribute the load. (b) To resist the temp stresses (c) To resist the shrinkage stresses (d) All the above

Last Answer : (d) All the above

An angle of 45° with a chain line may be set out with (A) Optical square (B) Open cross staff (C) French cross staff (D) Prismatic square

Description : An angle of 45° with a chain line may be set out with  (A) Optical square  (B) Open cross staff  (C) French cross staff  (D) Prismatic square

Last Answer : (C) French cross staff

The angle of intersection of a contour and a ridge line, is (A) 30° (B) 45° (C) 60° (D) 90°

Description : The angle of intersection of a contour and a ridge line, is  (A) 30°  (B) 45°  (C) 60°  (D) 90° 

Last Answer : (D) 90° 

It is essential that the all possible yield line patterns have to be investigated to find the ------- ----- [ A ] Highest value of the ultimate load [ B ] Lowest value of the ultimate load [ C ] Average value of all the loads. [ D ] None of the above.

Description : It is essential that the all possible yield line patterns have to be investigated to find the ------------ [ A ] Highest value of the ultimate load [ B ] Lowest value of the ultimate load [ C ] Average value of all the loads. [ D ] None of the above.

Last Answer : [ B ] Lowest value of the ultimate load

Pick up the correct statement from the following: (A) Higher the gauge, more deficient will be the rain catch (B) Heavier the rain, lesser will be the rain catch (C) The trees serving as wind brakes in the vicinity of the gauge, should not subtend angles greater than 45° (D) All the above

Description : Pick up the correct statement from the following: (A) Higher the gauge, more deficient will be the rain catch (B) Heavier the rain, lesser will be the rain catch (C) The trees serving as wind brakes in the vicinity of the gauge, should not subtend angles greater than 45° (D) All the above

Last Answer : Answer: Option D

If the resultant vector forms an angle of 45°, then the two components are A. parallel to each otheB. perpendicular to each other C. anti parallel to each other D. anti perpendicular to each otherr

Description : If the resultant vector forms an angle of 45°, then the two components are A. parallel to each other B. perpendicular to each other C. anti parallel to each other D. anti perpendicular to each other

Last Answer : perpendicular to each other

Which of the following is characteristic feature of Le Fort II fracture Options: 1) The fracture line runs through the root of the nose, lacrimal bone, floor of orbit, upper part of maxillary sinus and pterygoid plates 2) The fracture line runs above and parallel to the palate and crosses lower part of nasal septum, maxillary antra and the pterygoid plates 3) Complete separation of the facial bones from the cranial bones 4) Isolated fracture of orbital floor

Description : Which of the following is characteristic feature of Le Fort II fracture Options: 1) The fracture line runs through the root of the nose, lacrimal bone, floor of orbit, upper part of maxillary ... ) Complete separation of the facial bones from the cranial bones 4) Isolated fracture of orbital floor

Last Answer : Correct Answer: 1) The fracture line runs through the root of the nose, lacrimal bone, floor of orbit, upper part of maxillary sinus and pterygoid plates

Pick up the correct statement from the following (A) The contour lines having the same elevation cannot unite and continue as one line (B) A contour can not end abruptly, but must ultimately close itself not necessarily within the limits of map (C) The direction of steepest slope at a point on a contour is at right angles to the contour (D) All the above

Description : Pick up the correct statement from the following (A) The contour lines having the same elevation cannot unite and continue as one line (B) A contour can not end abruptly, but must ultimately close itself not ... slope at a point on a contour is at right angles to the contour (D) All the above

Last Answer : (D) All the above

If high yield strength deformed bars are used, the are of distribution reinforcement in slabs, should not less than. (a) 0.12% of the gross area of concrete (b) 0.15% of the gross area of concrete (c) 0.18% of the gross area of concrete (d) 0.20% of the gross area of concrete

Description : If high yield strength deformed bars are used, the are of distribution reinforcement in slabs, should not less than. (a) 0.12% of the gross area of concrete (b) 0.15% of the gross area of concrete (c) 0.18% of the gross area of concrete (d) 0.20% of the gross area of concrete

Last Answer : (a) 0.12% of the gross area of concrete

Minimum reinforcement in slabs, when High yield strength deformed bars [ A ] 0.12% of gross cross sectional area [ B ] 0.15% of gross cross sectional area [ C ] 0.20% of gross cross sectional area [ D ] 0.25% of gross cross sectional area.

Description : Minimum reinforcement in slabs, when High yield strength deformed bars [ A ] 0.12% of gross cross sectional area [ B ] 0.15% of gross cross sectional area [ C ] 0.20% of gross cross sectional area [ D ] 0.25% of gross cross sectional area.

Last Answer : [ A ] 0.12% of gross cross sectional area

As per IS: 1139, permissible stress in compression steel reinforcement for High Yield strength deformed bars is [ A ] 140 N/mm2 [ B ] 190 N/mm2 [ C ] 230 N/mm2 [ D ] 415 N/mm2

Description : As per IS: 1139, permissible stress in compression steel reinforcement for High Yield strength deformed bars is [ A ] 140 N/mm2 [ B ] 190 N/mm2 [ C ] 230 N/mm2 [ D ] 415 N/mm2

Last Answer : [ B ] 190 N/mm2

A clinometer is used for (A) Measuring angle of slope (B) Correcting line of collimation (C) Setting out right angles (D) Defining natural features

Description : A clinometer is used for (A) Measuring angle of slope (B) Correcting line of collimation (C) Setting out right angles (D) Defining natural features

Last Answer : (A) Measuring angle of slope

Pick up the correct statement from the following: (A) The bent up bars at a support resist the negative bending moment (B) The bent up bars at a support resist the sharing force (C) The bending of bars near supports is generally at 45° (D) All the above

Description : Pick up the correct statement from the following: (A) The bent up bars at a support resist the negative bending moment (B) The bent up bars at a support resist the sharing force (C) The bending of bars near supports is generally at 45° (D) All the above

Last Answer : (D) All the above

When a series of wheel loads crosses a simply supported girder, the maximum bending moment under any given wheel load occurs when (A) The centre of gravity of the load system is midway between the centre of span and wheel load under consideration (B) The centre of span is midway between the centre of gravity of the load system and the wheel load under consideration (C) The wheel load under consideration is midway between the centre of span and the centre of gravity of the load system (D) None of the above

Description : When a series of wheel loads crosses a simply supported girder, the maximum bending moment under any given wheel load occurs when (A) The centre of gravity of the load system is midway between the centre of ... the centre of span and the centre of gravity of the load system (D) None of the above

Last Answer : (B) The centre of span is midway between the centre of gravity of the load system and the wheel load under consideration

A uniformly distributed load (w) of length shorter than the span crosses a girder. The bending moment at a section in the girder will be maximum when (a) Head of the load is at the section (b) Tail of the load is at the section (c) Section divides the load in the same ratio as it divides the span (d) Section divides the load in two equal lengths.

Description : A uniformly distributed load (w) of length shorter than the span crosses a girder. The bending moment at a section in the girder will be maximum when (a) Head of the load is at the section (b) Tail ... load in the same ratio as it divides the span (d) Section divides the load in two equal lengths.

Last Answer : (c) Section divides the load in the same ratio as it divides the span

While propagating through homogeneous, isotropic media, (A) Directions of both the fields are orthogonal (B) Both the fields are at right angles to the direction of propagation (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : While propagating through homogeneous, isotropic media, (A) Directions of both the fields are orthogonal (B) Both the fields are at right angles to the direction of propagation (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : Answer: Option C

F = BIL can only be used if the magnetic field and electric current are A. at right angles to each other B. in same direction C. anti-parallel to each other D. anti-perpendicular to each other

Description : F = BIL can only be used if the magnetic field and electric current are A. at right angles to each other B. in same direction C. anti-parallel to each other D. anti-perpendicular to each other

Last Answer : at right angles to each other

The pressure acting on the stones in stone masonry construction should be (A) Along the direction of bedding planes (B) At 45° to the direction of bedding planes (C) At 60° to the direction of bedding planes (D) Perpendicular to the direction of bedding planes

Description : The pressure acting on the stones in stone masonry construction should be (A) Along the direction of bedding planes (B) At 45° to the direction of bedding planes (C) At 60° to the direction of bedding planes (D) Perpendicular to the direction of bedding planes

Last Answer : Answer: Option D

The Tropic of Cancer which passes through India is _____ to/of the equator. (a) at right angles (b) to the North (c) to the South (d) 90º to the South

Description : The Tropic of Cancer which passes through India is _____ to/of the equator. (a) at right angles (b) to the North (c) to the South (d) 90º to the South

Last Answer : Ans: (b)

Contact force always acts at A. acute angles to the surface producing it B. right angles to the surface producing it C. obtuse angle to the surface producing it D. parallel to the surface producing it

Description : Contact force always acts at A. acute angles to the surface producing it B. right angles to the surface producing it C. obtuse angle to the surface producing it D. parallel to the surface producing it

Last Answer : right angles to the surface producing it

In which of the following directions, the strength of timber is maximum? (A) Parallel to grains (B) 45° to grains (C) Perpendicular to grains (D) Same in all directions

Description : In which of the following directions, the strength of timber is maximum? (A) Parallel to grains (B) 45° to grains (C) Perpendicular to grains (D) Same in all directions

Last Answer : Answer: Option A

A well conditioned triangle has no angle less than (A) 20° (B) 30° (C) 45° (D) 60°

Description : A well conditioned triangle has no angle less than  (A) 20°  (B) 30°  (C) 45°  (D) 60°

Last Answer : (B) 30° 

The angle between two plane mirrors of optical square, is (A) 20° (B) 30° (C) 45° (D) 60°

Description : The angle between two plane mirrors of optical square, is  (A) 20°  (B) 30°  (C) 45°  (D) 60° 

Last Answer : (C) 45° 

A lemniscate curve will not be transitional throughout, if its deflection angle, is (A) 45° (B) 60° (C) 90° (D) 120°

Description : A lemniscate curve will not be transitional throughout, if its deflection angle, is (A) 45° (B) 60° (C) 90° (D) 120°

Last Answer : (A) 45°

The bearings of the lines AB and BC are 146° 30' and 68° 30'. The included angle ABC is (A) 102° (B) 78° (C) 45° (D) None of these

Description : The bearings of the lines AB and BC are 146° 30' and 68° 30'. The included angle ABC is (A) 102° (B) 78° (C) 45° (D) None of these

Last Answer : (A) 102

A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is (A) 0° (B) 30° (C) 45° (D) 60°

Description : A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is (A) 0° (B) 30° (C) 45° (D) 60°

Last Answer : (C) 45°

A member is balanced at its end by two inclined members carrying equal forces. For equilibrium the angle between the inclined bars must be (A) 3° (B) 45° (C) 90° (D) 120°

Description : A member is balanced at its end by two inclined members carrying equal forces. For equilibrium  the angle between the inclined bars must be  (A) 3°  (B) 45°  (C) 90°  (D) 120° 

Last Answer : (D) 120° 

The maximum shear stress occurs on the filament which makes an angle with the horizontal plane equal to (A) 30° (B) 45° (C) 60° (D) 90

Description : The maximum shear stress occurs on the filament which makes an angle with the horizontal plane equal to (A) 30° (B) 45° (C) 60° (D) 90

Last Answer : (B) 45°

The passive earth pressure of a soil is proportional to (where is the angle of internal friction of the soil.) (A) tan (45° - ) (B) tan (45° + ) (C) tan2 (45° - ) (D) tan2 (45° + )

Description : The passive earth pressure of a soil is proportional to (where is the angle of internal friction of the soil.) (A) tan (45° - ) (B) tan (45° + ) (C) tan2 (45° - ) (D) tan2 (45° + )

Last Answer : (D) tan2 (45° + )

Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil

Description : Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil

Last Answer : (C) Is limited to a maximum value of 45°

The active earth pressure of a soil is proportional to (where is the angle of friction of the soil) (A) tan (45° - ) (B) tan2 (45° + /2) (C) tan2 (45° - /2) (D) tan (45° + )

Description : The active earth pressure of a soil is proportional to (where is the angle of friction of the soil) (A) tan (45° - ) (B) tan2 (45° + /2) (C) tan2 (45° - /2) (D) tan (45° + )

Last Answer : Answer: Option C