A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is (A) 0° (B) 30° (C) 45° (D) 60°

A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is
(A) 0°
(B) 30°
(C) 45°
(D) 60°
by

1 Answer

Answer :

(C) 45°
by

Related questions

Projectile will attain its maximum range, if it is fired at an angle of A. 30° B. 47° C. 90° D. 45°

Description : Projectile will attain its maximum range, if it is fired at an angle of A. 30° B. 47° C. 90° D. 45°

Last Answer : 45°

A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of internal friction for the soil are respectively (A) 0.5 N/mm² and 30° (B) 0.05 N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Description : A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of ... N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Last Answer : Answer: Option B

The maximum shear stress occurs on the filament which makes an angle with the horizontal plane equal to (A) 30° (B) 45° (C) 60° (D) 90

Description : The maximum shear stress occurs on the filament which makes an angle with the horizontal plane equal to (A) 30° (B) 45° (C) 60° (D) 90

Last Answer : (B) 45°

The angle of minimum deviation of an equiangular prism, having a refractive index of 1.732 is (a) 60° (b) 30° (c) 45° (d) 0°

Description : The angle of minimum deviation of an equiangular prism, having a refractive index of 1.732 is (a) 60° (b) 30° (c) 45° (d) 0°

Last Answer : Ans:(a)

The angle between skew back of a flat arch and the horizontal, is kept approximately equal to (A) 0° (B) 30° (C) 60° (D) 90

Description : The angle between skew back of a flat arch and the horizontal, is kept approximately equal to (A) 0° (B) 30° (C) 60° (D) 90

Last Answer : Answer: Option C

The angle in which a cricket ball should be hit to travel maximum horizontal distance is : (1) 60° with horizontal (2) 45° with horizontal (3) 30° with horizontal (4) 15° with horizontal

Description : The angle in which a cricket ball should be hit to travel maximum horizontal distance is : (1) 60° with horizontal (2) 45° with horizontal (3) 30° with horizontal (4) 15° with horizontal

Last Answer : (2) 45° with horizontal Explanation: This has to do with the equation of a parabola or trajectory which is z = (tane)x 2 cos 9) 2. We can see that if the ball is fired at a 45 degree angle from the ground, the horizontal distance will be a maximum.

The angle in which a cricket ball should be hit to travel maximum horizontal distance is : (1) 60° with horizontal (2) 45° with horizontal (3) 30° with horizontal (4) 15° with horizontal

Description : The angle in which a cricket ball should be hit to travel maximum horizontal distance is : (1) 60° with horizontal (2) 45° with horizontal (3) 30° with horizontal (4) 15° with horizontal

Last Answer : 45° with horizontal 

sin 2A = 2 sin A is true when A = a 30° b 45° c 0° d 60°

Description : sin 2A = 2 sin A is true when A = a 30° b 45° c 0° d 60°

Last Answer : a 0

Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is (A) 0° (B) 30° (C) 45° (D) 90°

Description : Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is (A) 0° (B) 30° (C) 45° (D) 90°

Last Answer : Answer: Option D

For determining the support reactions at A and B of a three hinged arch, points B and Care joined and produced to intersect the load line at D and a line parallel to the load line through A at D'. Distances AD, DD' and AD' when measured were 4 cm, 3 cm and 5 cm respectively. The angle between the reactions at A and B is (A) 30° (B) 45° (C) 60° (D) 90

Description : For determining the support reactions at A and B of a three hinged arch, points B and Care joined  and produced to intersect the load line at D and a line parallel to the load line through A at D'.  Distances AD, DD ... reactions at A and B is  (A) 30°  (B) 45°  (C) 60°  (D) 90

Last Answer : (D) 90

The angle of intersection of a contour and a ridge line, is (A) 30° (B) 45° (C) 60° (D) 90°

Description : The angle of intersection of a contour and a ridge line, is  (A) 30°  (B) 45°  (C) 60°  (D) 90° 

Last Answer : (D) 90° 

A well conditioned triangle has no angle less than (A) 20° (B) 30° (C) 45° (D) 60°

Description : A well conditioned triangle has no angle less than  (A) 20°  (B) 30°  (C) 45°  (D) 60°

Last Answer : (B) 30° 

The angle between two plane mirrors of optical square, is (A) 20° (B) 30° (C) 45° (D) 60°

Description : The angle between two plane mirrors of optical square, is  (A) 20°  (B) 30°  (C) 45°  (D) 60° 

Last Answer : (C) 45° 

In any good staircase, the maximum and minimum pitch respectively should be (A) 90° and 0° (B) 75° and 30° (C) 60° and 10° (D) 40° and 25°

Description : In any good staircase, the maximum and minimum pitch respectively should be (A) 90° and 0° (B) 75° and 30° (C) 60° and 10° (D) 40° and 25°

Last Answer : Option D

A projectile is thrown at an angle of 30° to the horizontal. What should be the range of initial velocity (u)

Description : A projectile is thrown at an angle of 30° to the horizontal. What should be the range of initial velocity (u)

Last Answer : A projectile is thrown at an angle of 30° to the horizontal. What should be the range of initial velocity (u) ... 40m and 50 m? Assume g = 10 m s-2.

The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane

Description : The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane

Last Answer : b. 30? with vertical

For a parallel load on a fillet weld of equal legs, the plane of maximum shear occurs at (a) 22.5° (b) 30° (c) 45° (d) 60°

Description : For a parallel load on a fillet weld of equal legs, the plane of maximum shear occurs at (a) 22.5° (b) 30° (c) 45° (d) 60°

Last Answer : (c) 45°

The zone in which transverse bending is likely to occur may be obtained by drawing a line from the (A) 30° (B) 45° (C) 60° (D) None of these

Description : The zone in which transverse bending is likely to occur may be obtained by drawing a line from the (A) 30° (B) 45° (C) 60° (D) None of these

Last Answer : Answer: Option B

During the motion of a projectile fired from the earth surface, ______. (1) its kinetic energy remains constant (2) its momentum remains constant (3) vertical component of its velocity remains constant (4) horizontal component of its velocity remains constant

Description : During the motion of a projectile fired from the earth surface, ______. (1) its kinetic energy remains constant (2) its momentum remains constant (3) vertical component of its velocity remains constant (4) horizontal component of its velocity remains constant

Last Answer : (4) horizontal component of its velocity remains constant Explanation: The motion of a projectile is a two-dimensional motion-Horizontal motion and vertical motion-that take place independent ... continuously affects the vertical component, so the vertical motion is a uniformly accelerated motion.

During the motion of a projectile fired from the earth surface, _______ (1) its kinetic energy remains constant (2) its momentum remains constant (3) vertical component of its velocity remains constant (4) horizontal component of its velocity remains constant

Description : During the motion of a projectile fired from the earth surface, _______ (1) its kinetic energy remains constant (2) its momentum remains constant (3) vertical component of its velocity remains constant (4) horizontal component of its velocity remains constant

Last Answer : horizontal component of its velocity remains constant

The value of 2 tan 2 45°+ cos 2 30° − sin 2 60° is (a) 0 (b) 1 (c) -2 (d) 2

Description : The value of 2 tan 2 45°+ cos 2 30° − sin 2 60° is (a) 0 (b) 1 (c) -2 (d) 2

Last Answer : (d) 2

Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil

Description : Select the incorrect statement. Effective angle of shearing resistance (A) Increases as the size of particles increases (B) Increases as the soil gradation improves (C) Is limited to a maximum value of 45° (D) Is rarely more than 30° for fine grained soil

Last Answer : (C) Is limited to a maximum value of 45°

Maximum number of vehicles can be parked with (A) Parallel parking (B) 30° angle parking (C) 45° angle parking (D) 90° angle parking

Description : Maximum number of vehicles can be parked with (A) Parallel parking (B) 30° angle parking (C) 45° angle parking (D) 90° angle parking

Last Answer : Answer: Option D

If the horizontal range of a projectile is four times its maximum height, the angle of projection is

Description : If the horizontal range of a projectile is four times its maximum height, the angle of projection is 

Last Answer : 45°

A projectile is fired into the air at an angle of 23 degrees. At what other angle would this projectile have the same range if air resistance is neglected? w) 46 degrees x) 60 degrees y) 67 degrees z) 68 degrees

Description : A projectile is fired into the air at an angle of 23 degrees. At what other angle would this projectile have the same range if air resistance is neglected? w) 46 degrees x) 60 degrees y) 67 degrees z) 68 degrees

Last Answer : ANSWER: Y -- 67 DEGREES

The angle of internal friction of clays, is usually (A) 0° to 5° (B) 5° to 20° (C) 20° to 30° (D) 30° to 45

Description : The angle of internal friction of clays, is usually (A) 0° to 5° (B) 5° to 20° (C) 20° to 30° (D) 30° to 45

Last Answer : Answer: Option B

What is the value of included angle of a triangular notch for maximum discharge? (A) 30° (B) 60° (C) 90° (D) 120°

Description : What is the value of included angle of a triangular notch for maximum discharge? (A) 30° (B) 60° (C) 90° (D) 120°

Last Answer : (C) 90°

If the long chord and tangent length of a circular curve of radius R are equal the angle of deflection, is (A) 30° (B) 60° (C) 90° (D) 120°

Description : If the long chord and tangent length of a circular curve of radius R are equal the angle of deflection, is (A) 30° (B) 60° (C) 90° (D) 120°

Last Answer : D

ABCD is a regular parallelogram plot of land whose angle BAD is 60°. If the bearing of the line AB is 30°, the bearing of CD, is (A) 90° (B) 120° (C) 210° (D) 270°

Description : ABCD is a regular parallelogram plot of land whose angle BAD is 60°. If the bearing of the line AB is 30°, the bearing of CD, is (A) 90° (B) 120° (C) 210° (D) 270°

Last Answer : (C) 210°

A lemniscate curve will not be transitional throughout, if its deflection angle, is (A) 45° (B) 60° (C) 90° (D) 120°

Description : A lemniscate curve will not be transitional throughout, if its deflection angle, is (A) 45° (B) 60° (C) 90° (D) 120°

Last Answer : (A) 45°

The anchorage value of a hook is assumed sixteen times the diameter of the bar if the angle of the bend, is (A) 30° (B) 40° (C) 45° (D) All the above

Description : The anchorage value of a hook is assumed sixteen times the diameter of the bar if the angle of the bend, is (A) 30° (B) 40° (C) 45° (D) All the above

Last Answer : Answer: Option D

A ship strikes the berth generally at an angle (A) 90° with the face of the dock (B) 45° with the face of the dock (C) 30° with the face of the dock (D) 10° with the face of the dock

Description : A ship strikes the berth generally at an angle (A) 90° with the face of the dock (B) 45° with the face of the dock (C) 30° with the face of the dock (D) 10° with the face of the dock

Last Answer : (D) 10° with the face of the dock

When horizontal range of a projectile equal to the distance through which projectile will rise, then the angle of projection of the particle will be equal to a.36? b.24? c.48? d.107 dynes e.76?

Description : When horizontal range of a projectile equal to the distance through which projectile will rise, then the angle of projection of the particle will be equal to a.36? b.24? c.48? d.107 dynes e.76?

Last Answer : e. 76?

After a projectile is fired horizontally near the earth's surface, the horizontal component of its velocity, neglecting any air resistance: w) increases steadily x) decreases steadily y) first decreases, then increases z) remains constant

Description : After a projectile is fired horizontally near the earth's surface, the horizontal component of its velocity, neglecting any air resistance: w) increases steadily x) decreases steadily y) first decreases, then increases z) remains constant

Last Answer : ANSWER: Z -- REMAINS CONSTANT 

If the angle of incidence formed on a concave mirror at a point is 30° then the angle of reflection will be: (1) 15° (2) 30° (3) 60° (4) 90°

Description : If the angle of incidence formed on a concave mirror at a point is 30° then the angle of reflection will be: (1) 15° (2) 30° (3) 60° (4) 90°

Last Answer : (2) 30° Explanation: The angle between the incident ray and the normal is known as the angle of inci dence. The angle between the reflected ray and the normal is known as the angle of reflection.

The asbestos cement pipes are generally laid A. Horizontally B. Vertically C. At an angle of 30° D. At an angle of 60°

Description : The asbestos cement pipes are generally laid A. Horizontally B. Vertically C. At an angle of 30° D. At an angle of 60°

Last Answer : ANS: B

The screens are fixed A. Perpendicular to the direction of flow B. Parallel to the direction of flow C. At an angle 30° to 60° to the direction of flow D. None of these

Description : The screens are fixed A. Perpendicular to the direction of flow B. Parallel to the direction of flow C. At an angle 30° to 60° to the direction of flow D. None of these

Last Answer : ANS: C

The disc angle of a good plough varies between a) 25°-30° b) 10°-15° c) 18°-24° d) 42°-45°

Description : The disc angle of a good plough varies between a) 25°-30° b) 10°-15° c) 18°-24° d) 42°-45°

Last Answer : 42°-45°

The helix angle for double helical gears may be made up to (A) 45° (B) 60° (C) 75° (D) 90°

Description : The helix angle for double helical gears may be made up to (A) 45° (B) 60° (C) 75° (D) 90°

Last Answer : (A) 45°

At what value of crank angle (roughly), no flow of water from or into the air vessel takes place in case of a double acting reciprocating pump? (A) 40° and 140° (B) 45° and 60° (C) 90° and 80° (D) 20° and 120°

Description : At what value of crank angle (roughly), no flow of water from or into the air vessel takes place in case of a double acting reciprocating pump? (A) 40° and 140° (B) 45° and 60° (C) 90° and 80° (D) 20° and 120°

Last Answer : (A) 40° and 140

If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Description : If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Last Answer : (B) 45°

The maximum slope of a belt conveyor can be (A) 15° (B) 30° (C) 45° (D) 60

Description : The maximum slope of a belt conveyor can be (A) 15° (B) 30° (C) 45° (D) 60

Last Answer : (B) 30°

The bearing of C from A is N 30° E and from B, 50 metres east of A, is N 60° W. The departure of C from A is (A) 50 m (B) 50 m (C) 25 m (D) 25 m

Description : The bearing of C from A is N 30° E and from B, 50 metres east of A, is N 60° W. The departure of C from A is (A) 50 m (B) 50 m (C) 25 m (D) 25 m

Last Answer : (D) 25 m

In stone masonry, stones (stratified rocks) are so placed that the direction of pressure to the plane of bedding is (A) Right angles (B) 45° (C) 60° (D) Paralle

Description : In stone masonry, stones (stratified rocks) are so placed that the direction of pressure to the plane of bedding is (A) Right angles (B) 45° (C) 60° (D) Paralle

Last Answer : Answer: Option A

For the manufacture of plywood, veneers are placed so that grains of adjacent veneers (A) Run at right angles (B) Parallel (C) Inclined at 45° (D) Inclined at 60°

Description : For the manufacture of plywood, veneers are placed so that grains of adjacent veneers (A) Run at right angles (B) Parallel (C) Inclined at 45° (D) Inclined at 60°

Last Answer : Answer: Option A

The pressure acting on the stones in stone masonry construction should be (A) Along the direction of bedding planes (B) At 45° to the direction of bedding planes (C) At 60° to the direction of bedding planes (D) Perpendicular to the direction of bedding planes

Description : The pressure acting on the stones in stone masonry construction should be (A) Along the direction of bedding planes (B) At 45° to the direction of bedding planes (C) At 60° to the direction of bedding planes (D) Perpendicular to the direction of bedding planes

Last Answer : Answer: Option D

The angle between the index glass and the horizon glass of a box sextant is 40°; the horizontal angle between the two points sighted by the instruments is : (a) 20° (b) 60° (c) 40° (d) 80°

Description : The angle between the index glass and the horizon glass of a box sextant is 40°; the horizontal angle between the two points sighted by the instruments is : (a) 20° (b) 60° (c) 40° (d) 80°

Last Answer : (a) 20°

For the maximum range of a projectile the angle of projection should be a.90? b.30? c.22 d.45? e.15?

Description : For the maximum range of a projectile the angle of projection should be a.90? b.30? c.22 d.45? e.15?

Last Answer : d. 45?

A projectile reaches maximum range, when angle of projection is at?

Description : A projectile reaches maximum range, when angle of projection is at?

Last Answer : 450

How does the unbalanced force of gravity affect the horizontal and vertical velocity of an object in projectile?

Description : How does the unbalanced force of gravity affect the horizontal and vertical velocity of an object in projectile?

Last Answer : In the absence of air resistance, the force of gravity has noeffect on the horizontalcomponent of a projectile's velocity, and causes the verticalcomponent of its velocityto increase by 9.8 meters (32.2 feet) per second downward forevery second of its flight.