Minimum number of bars for a circular column [ A ] Four [ B ] Five [ C ] Six [ D ] Eight

Minimum number of bars for a circular column
[ A ] Four
[ B ] Five
[ C ] Six
[ D ] Eight
by

1 Answer

Answer :

[ C ] Six
by

Related questions

Minimum number of bars for a column of rectangular section [ A ] Two [ B ] Four [ C ] Six [ D ] Eight

Description : Minimum number of bars for a column of rectangular section [ A ] Two [ B ] Four [ C ] Six [ D ] Eight

Last Answer : [ B ] Four

Which of the following statements is incorrect? (A) Minimum cross sectional area of longitudinal reinforcement in a column is 0.8% (B) Spacing of longitudinal bars measured along the periphery of column should not exceed 300 mm (C) Reinforcing bars in a column should not be less than 12 mm in diameter (D) The number of longitudinal bars provided in a circular column should not be less than four

Description : Which of the following statements is incorrect? (A) Minimum cross sectional area of longitudinal reinforcement in a column is 0.8% (B) Spacing of longitudinal bars measured along the periphery of ... (D) The number of longitudinal bars provided in a circular column should not be less than four

Last Answer : Answer: Option D

Select the incorrect statement from the following [ A ] Reinforcing bars in a column should not be less than 12 mm in diameter [ B ] The number of longitudinal bars in a circular column should not exceed four [ C ] The minimum percentage of longitudinal steel in columns should be 0.8% [ D ] None of the above

Description : Select the incorrect statement from the following [ A ] Reinforcing bars in a column should not be less than 12 mm in diameter [ B ] The number of longitudinal bars in a circular column should not ... The minimum percentage of longitudinal steel in columns should be 0.8% [ D ] None of the above

Last Answer : [ B ] The number of longitudinal bars in a circular column should not exceed four

The pitch of the main bars in a simply supported slab, should not exceed its effective depth by (A) Three times (B) Four times (C) Five times (D) Six times

Description : The pitch of the main bars in a simply supported slab, should not exceed its effective depth by (A) Three times (B) Four times (C) Five times (D) Six times

Last Answer : Answer: Option D

In multiple point mooring system, vessel is secured to minimum of (A) Two points (B) Four points (C) Six points (D) Eight points

Description : In multiple point mooring system, vessel is secured to minimum of (A) Two points (B) Four points (C) Six points (D) Eight points

Last Answer : (B) Four points

The minimum number of main steel bars provided in R.C.C. (A) Rectangular columns is 4 (B) Circular columns is 6 (C) Octagonal columns is 8 (D) All the above

Description : The minimum number of main steel bars provided in R.C.C. (A) Rectangular columns is 4 (B) Circular columns is 6 (C) Octagonal columns is 8 (D) All the above

Last Answer : Answer: Option D

The minimum diameter of longitudinal bars in a column is (A) 6 mm (B) 8 mm (C) 12 mm (D) 16 mm

Description : The minimum diameter of longitudinal bars in a column is (A) 6 mm (B) 8 mm (C) 12 mm (D) 16 mm

Last Answer : Answer: Option C

Minimum clear cover (in mm) to the main steel bars in slab, beam, column and footing respectively, are (a) 10, 15, 20 and 25 (b) 15, 25, 40 and 75 (c ) 20, 25, 30 and 40 (d) 20, 35, 40 and 75

Description : Minimum clear cover (in mm) to the main steel bars in slab, beam, column and footing respectively, are (a) 10, 15, 20 and 25 (b) 15, 25, 40 and 75 (c ) 20, 25, 30 and 40 (d) 20, 35, 40 and 75

Last Answer : (b) 15, 25, 40 and 75

The pitch of bars of main reinforcement in slab should not exceed ________the effective depth of slab. (a) Double (b) Three times (c) Five times (d) Six times

Description : The pitch of bars of main reinforcement in slab should not exceed ________the effective depth of slab. (a) Double (b) Three times (c) Five times (d) Six times

Last Answer : (b) Three times

Minimum pitch of transverse reinforcement in a column is (A) The least lateral dimension of the member (B) Sixteen times the smallest diameter of longitudinal reinforcement bar to be tied (C) Forty-eight times the diameter of transverse reinforcement (D) Lesser of the above three values

Description : Minimum pitch of transverse reinforcement in a column is (A) The least lateral dimension of the member (B) Sixteen times the smallest diameter of longitudinal reinforcement bar to be tied (C) Forty-eight times the diameter of transverse reinforcement (D) Lesser of the above three values

Last Answer : Answer: Option D

Sukanya Samriddhi Account can be opened up to age of ________ years only from the date of birth A. Five years B. Four years C. Six years D. Eight years E. Ten years

Description : Sukanya Samriddhi Account can be opened up to age of ________ years only from the date of birth A. Five years B. Four years C. Six years D. Eight years E. Ten years

Last Answer : E. Ten years Explanation: Sukanya Samriddhi Account can be opened up to age of 10 years only from the date of birth.

If a concrete column 200 × 200 mm in cross-section is reinforced with four steel bars of 1200 mm2 total cross-sectional area. Calculate the safe load for the column if permissible stress in concrete is 5 N/mm2 and Es is 15 Ec (A) 264 MN (B) 274 MN (C) 284 MN (D) 294 MN

Description : If a concrete column 200 200 mm in cross-section is reinforced with four steel bars of 1200  mm2  total cross-sectional area. Calculate the safe load for the column if permissible stress in  concrete is 5 N/mm2 ... 15 Ec (A) 264 MN  (B) 274 MN  (C) 284 MN  (D) 294 MN 

Last Answer : (C) 284 MN 

The total number of planets revolving around the sun is – (1) Five (2) Eight (3) Seven (4) Six

Description : The total number of planets revolving around the sun is – (1) Five (2) Eight (3) Seven (4) Six

Last Answer : (2) Eight Explanation:There are 8 planets of the solar system that revolve around the sun: Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune. Pluto was stripped of its planetary status and categorized as a 'dwarf planet' by the International Astronomical Union in 2005.

The total number of planets revolving around the sun is (1) Five (2) Eight (3) Seven (4) Six

Description : The total number of planets revolving around the sun is (1) Five (2) Eight (3) Seven (4) Six

Last Answer : Eight

The minimum number of polypeptide chains in an immunoglobulin is (A) Two (B) Four (C) Five (D) Six

Description : The minimum number of polypeptide chains in an immunoglobulin is (A) Two (B) Four (C) Five (D) Six

Last Answer : Answer : B

How do you write eight hundred six thousand two hundred fifty five in standard form?

Description : How do you write eight hundred six thousand two hundred fifty five in standard form?

Last Answer : You would write it like this: 806,255.

Constant segments of heavy chains are of (A) Five types (B) Six types (C) Seven types (D) Eight types

Description : Constant segments of heavy chains are of (A) Five types (B) Six types (C) Seven types (D) Eight types

Last Answer : Answer : D

IUCN categorized major threatened species under : (1) seven classes (2) five classes (3) six classes (4) Eight classes

Description : IUCN categorized major threatened species under : (1) seven classes (2) five classes (3) six classes (4) Eight classes

Last Answer : Explanation: At present, the IUCN Red List of Threatened Species (also known as the Red Data List) lists eight classes of organism under the group of "threatened categories" of endangered; ... tag is applied are: mammals; birds; reptiles; amphibians; fishes; insects; mollusks; and plants.

How many pairs of contrasting characters in pea plants were studied by Mendel in his experiments? (a) Eight (b) Seven (c) Five (d) Six

Description : How many pairs of contrasting characters in pea plants were studied by Mendel in his experiments? (a) Eight (b) Seven (c) Five (d) Six

Last Answer : b) flower position

In the foreign post for the purpose of fixing surcharges and combined charges all the countries and territories are divided into a) Six groups b) Seven groups c) Five groups d) Eight groups

Description : In the foreign post for the purpose of fixing surcharges and combined charges all the countries and territories are divided into a) Six groups b) Seven groups c) Five groups d) Eight groups

Last Answer : a) Six groups

Among flowers of Calotropis, tulip, Sesbania, Asparagus, Colchicum, sweet pea, Petunia, Indigofera, mustard, soybean, tobacco and groundnut, how many plants have corolla with valvate aestivation? (a) Six (b) Seven (c) Eight (d) Five

Description : Among flowers of Calotropis, tulip, Sesbania, Asparagus, Colchicum, sweet pea, Petunia, Indigofera, mustard, soybean, tobacco and groundnut, how many plants have corolla with valvate aestivation? (a) Six (b) Seven (c) Eight (d) Five

Last Answer : (b) Seven

Agriculture census (in world ) is carried out after every _____ years? a. Ten b. Eight c. Six d. Five

Description : Agriculture census (in world ) is carried out after every _____ years? a. Ten b. Eight c. Six d. Five

Last Answer : a. Ten

Agriculture census ( in India )is carried out after every _____ years? a. Ten b. Eight c. Six d. Five

Description : Agriculture census ( in India )is carried out after every _____ years? a. Ten b. Eight c. Six d. Five

Last Answer : d. Five

National AQI published by Central Pollution Control Board (CPCB) considers concentration of how many pollutants for determining the index: a. Five b. Eight c. Six d. Twelve

Description : National AQI published by Central Pollution Control Board (CPCB) considers concentration of how many pollutants for determining the index: a. Five b. Eight c. Six d. Twelve

Last Answer : b. Eight

National AQI published by Central Pollution Control Board (CPCB) considers concentration of how many pollutants for determining the index: a. Five b. Eight c. Six d. Twelve

Description : National AQI published by Central Pollution Control Board (CPCB) considers concentration of how many pollutants for determining the index: a. Five b. Eight c. Six d. Twelve

Last Answer : b. Eight

No of Ingredient of Portion are? (i) Five. (ii) Six (iii) Seven* (iv) Eight

Description : No of Ingredient of Portion are? (i) Five. (ii) Six (iii) Seven* (iv) Eight

Last Answer : (iii) Seven*

Claims for ____ relationships between a nutrient or a food and the risk of a disease or health-related condition are now allowed on food labels. a. five c. seven b. six d. eight

Description : Claims for ____ relationships between a nutrient or a food and the risk of a disease or health-related condition are now allowed on food labels. a. five c. seven b. six d. eight

Last Answer : d. eight

One ounce of blue cheese has ____ grams of fat. a. five c. seven b. six d. eight

Description : One ounce of blue cheese has ____ grams of fat. a. five c. seven b. six d. eight

Last Answer : d. eight

The diameter of longitudinal bars of a column should never be less than (A) 6 mm (B) 8 mm (C) 10 mm (D) 12 mm

Description : The diameter of longitudinal bars of a column should never be less than (A) 6 mm (B) 8 mm (C) 10 mm (D) 12 mm

Last Answer : Answer: Option D

A short column 20 cm × 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2 , the Safe load on the column, should not exceed (A) 4120 kg (B) 41,200 kg (C) 412,000 kg (D) None of these

Description : A short column 20 cm 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2 , the Safe load on ... should not exceed (A) 4120 kg (B) 41,200 kg (C) 412,000 kg (D) None of these

Last Answer : Answer: Option B

If the size of a column is reduced above the floor, the main bars of the columns, are (A) Continued up (B) Bent inward at the floor level (C) Stopped just below the floor level and separate lap bars provided (D) All the above

Description : If the size of a column is reduced above the floor, the main bars of the columns, are (A) Continued up (B) Bent inward at the floor level (C) Stopped just below the floor level and separate lap bars provided (D) All the above

Last Answer : Answer: Option D

If the diameter of longitudinal bars of a square column is 16 mm, the diameter of lateral ties should not be less than (A) 4 mm (B) 5 mm (C) 6 mm (D) 8 mm

Description : If the diameter of longitudinal bars of a square column is 16 mm, the diameter of lateral ties should not be less than (A) 4 mm (B) 5 mm (C) 6 mm (D) 8 mm

Last Answer : Answer: Option B

An R.C.C. column of 30 cm diameter is reinforced with 6 bars 12 mm placed symmetrically along the circumference. If it carries a load of 40, 000 kg axially, the stress is (A) 49.9 kg/cm2 (B) 100 kg/cm2 (C) 250 kg/cm2 (D) 175 kg/cm

Description : An R.C.C. column of 30 cm diameter is reinforced with 6 bars 12 mm placed symmetrically along the circumference. If it carries a load of 40, 000 kg axially, the stress is (A) 49.9 kg/cm2 (B) 100 kg/cm2 (C) 250 kg/cm2 (D) 175 kg/cm

Last Answer : Answer: Option A

Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of the column (C) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column

Description : Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of ... ) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column

Last Answer : Answer: Option C

Top bars are extended to the projecting parts of the combined footing of two columns Ldistance apart for a distance of (A) 0.1 L from the outer edge of column (B) 0.1 L from the centre edge of column (C) Half the distance of projection (D) One-fourth the distance of projection

Description : Top bars are extended to the projecting parts of the combined footing of two columns Ldistance apart for a distance of (A) 0.1 L from the outer edge of column (B) 0.1 L from the centre edge of column (C) Half the distance of projection (D) One-fourth the distance of projection

Last Answer : Answer: Option B

The purpose of lateral ties in short R.C. columns is to (a) Increase the load carrying capacity of column (b) Facilitate compaction of concrete (c) Facilitate construction (d) Avoid buckling of longitudinal bars

Description : The purpose of lateral ties in short R.C. columns is to (a) Increase the load carrying capacity of column (b) Facilitate compaction of concrete (c) Facilitate construction (d) Avoid buckling of longitudinal bars

Last Answer : (d) Avoid buckling of longitudinal bars

The Maximum spacing of the longitudinal bars measured long the periphery of the column should be [ A ] 250 mm [ B ] 300 mm [ C ] 400 mm [ D ] 450 mm

Description : The Maximum spacing of the longitudinal bars measured long the periphery of the column should be [ A ] 250 mm [ B ] 300 mm [ C ] 400 mm [ D ] 450 mm

Last Answer : [ B ] 300 mm

Hydraulic diameter for non-circular ducts is equal to __________ times the area of flow divided by the perimeter. (A) Two (B) Three (C) Four (D) Eight

Description : Hydraulic diameter for non-circular ducts is equal to __________ times the area of flow divided by the perimeter. (A) Two (B) Three (C) Four (D) Eight

Last Answer : (C) Four

According to Euler’s column theory, the crippling load for a column of length (l) fixed at both ends is __________ the crippling load for a similar column hinged at both ends. (a) equal to (b) two times (c) four times (d) eight times

Description : According to Euler’s column theory, the crippling load for a column of length (l) fixed at both ends is __________ the crippling load for a similar column hinged at both ends. (a) equal to (b) two times (c) four times (d) eight times

Last Answer : (c) four times

The spacing of transverse reinforcement of column is decided by the following consideration. (A) The least lateral dimension of the column (B) Sixteen times the diameter of the smallest longitudinal reinforcing rods in the column (C) Forty-eight times the diameter of transverse reinforcement (D) All the above

Description : The spacing of transverse reinforcement of column is decided by the following consideration. (A) The least lateral dimension of the column (B) Sixteen times the diameter of the smallest longitudinal ... column (C) Forty-eight times the diameter of transverse reinforcement (D) All the above

Last Answer : Answer: Option D

What is the maximum time interval permissible between two successive sessions of the Parliament? (1) Four months (2) Six months (3) Eight months (4) Nine months

Description : What is the maximum time interval permissible between two successive sessions of the Parliament? (1) Four months (2) Six months (3) Eight months (4) Nine months

Last Answer : (2) Six months Explanation: The period during which the House meets to conduct its business is called a session. The Constitution empowers the President to summon each House at such intervals that there ... month's gap between the two sessions. Hence the Parliament must meet at least twice a year.

How many minutes for each degree of longitude does the local time of any place vary from the Greenwich time? (1) Two minutes (2) Four minutes (3) Six minutes (4) Eight minutes

Description : How many minutes for each degree of longitude does the local time of any place vary from the Greenwich time? (1) Two minutes (2) Four minutes (3) Six minutes (4) Eight minutes

Last Answer : (2) Four minutes Explanation: The first of these ideas is the relationship between time and the rotation of the Earth. It takes an average time of 24 hours for the Earth to rotate 360 degrees. If you ... four minutes. 1 hour = 60 minutes / 15° = 4 minutes per degree Physical Geography (Set: 09)

How many PM knowledge areas are defined by Project Management Institute (PMI) A. Six B. Four C. Eight D. Ten (Ans.)

Description : How many PM knowledge areas are defined by Project Management Institute (PMI)  A. Six  B. Four  C. Eight  D. Ten (Ans.)

Last Answer : D. Ten (Ans.)

For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? a) three b) four c) six d) eight

Description : For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? a) three b) four c) six d) eight

Last Answer : c) six

For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? A : Three B : Four C : Six D : Eight

Description : For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? A : Three B : Four C : Six D : Eight

Last Answer : C : Six

For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? A : Three B : Four C : Six D : Eight

Description : For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? A : Three B : Four C : Six D : Eight

Last Answer : C : Six

1-Buten-3-yne has (a) six σ and four π bonds (b) seven σ and three π bonds (c) eight σ and two π bonds (d) nine σ and one π bond

Description : 1-Buten-3-yne has (a) six σ and four π bonds (b) seven σ and three π bonds (c) eight σ and two π bonds (d) nine σ and one π bond

Last Answer : seven σ and three π bonds

The expected efficiency of a single riveted lap joint is of the order of 50%. If the thickness of the plate is increased four times, then the rivet diameter will have to be increased __________ times. (A) Two (B) Four (C) Six (D) Eight

Description : The expected efficiency of a single riveted lap joint is of the order of 50%. If the thickness of the plate is increased four times, then the rivet diameter will have to be increased __________ times. (A) Two (B) Four (C) Six (D) Eight

Last Answer : Option A

For a major bridge, the URN would comprise of a) single digit b)eight digits* c) six digits d) four digits

Description : For a major bridge, the URN would comprise of a) single digit b)eight digits* c) six digits d) four digits

Last Answer : b)eight digits*

There are hoe many phases in RMDFR model of digital forensics? a. Four b. Six c. Eight d. Ten

Description : There are hoe many phases in RMDFR model of digital forensics? a. Four b. Six c. Eight d. Ten

Last Answer : b. Six