Description : The spacing of transverse reinforcement of column is decided by the following consideration. (A) The least lateral dimension of the column (B) Sixteen times the diameter of the smallest longitudinal ... column (C) Forty-eight times the diameter of transverse reinforcement (D) All the above
Last Answer : Answer: Option D
Description : Minimum pitch of transverse reinforcement in a column is (A) The least lateral dimension of the member (B) Sixteen times the smallest diameter of longitudinal reinforcement bar to be tied (C) Forty-eight times the diameter of transverse reinforcement (D) Lesser of the above three values
Description : The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii
Last Answer : [ D ] i, ii and iii
Description : The diameter of transverse reinforcement of columns should be equal to one-fourth of the diameter of the main steel rods but not less than (A) 4 mm (B) 5 mm (C) 6 mm (D) 7 mm
Description : The transverse reinforcements provided at right angles to the main reinforcement (A) Distribute the load (B) Resist the temperature stresses (C) Resist the shrinkage stress (D) All the above
Description : The transverse reinforcements provided at right angles to the main reinforcement. (a) To distribute the load. (b) To resist the temp stresses (c) To resist the shrinkage stresses (d) All the above
Last Answer : (d) All the above
Description : The purpose of transverse reinforcement, in a slab is to (a) Distribute the effect to f point load on the slab more evenly and uniformly (b) Distribute the shrinkage and temp cracks more ever (c) Keep the main reinforcement in position (d) All of the above.
Last Answer : (d) All of the above.
Description : A part of the slab may be considered as the flange of the T-beam if (A) Flange has adequate reinforcement transverse to beam (B) It is built integrally with the beam (C) It is effectively bonded together with the beam (D) All the above
Description : Pick up the assumption for the design of a pre-stressed concrete member from the following: (A) A transverse plane section remains a plane after bending (B) During deformation limits, Hook's ... of stress in reinforcement due to changes in external loading is negligible (D) All the above
Description : In a singly reinforced beam, the effective depth is measured from its compression edge to (A) Tensile edge (B) Tensile reinforcement (C) Neutral axis of the beam (D) Longitudinal central axis
Last Answer : Answer: Option B
Description : Pick up the correct statement from the following: (A) Lateral reinforcement in R.C.C. columns is provided to prevent the longitudinal reinforcement from buckling (B) Lateral reinforcement prevents ... Lateral reinforcement stops breaking away of concrete cover, due to buckling (D) All the above
Description : The limits of percentage p of the longitudinal reinforcement in a column is given by (A) 0.15% to 2% (B) 0.8% to 4% (C) 0.8% to 6% (D) 0.8% to 8%
Last Answer : Answer: Option C
Description : Which of the following statements is incorrect? (A) Minimum cross sectional area of longitudinal reinforcement in a column is 0.8% (B) Spacing of longitudinal bars measured along the periphery of ... (D) The number of longitudinal bars provided in a circular column should not be less than four
Description : A counter may be defined as an imaginary line passing through (a) Points on the longitudinal section (b) Points of equal elevation (c) Point of equal local ground slope (d) Points of transverse section surveys
Last Answer : (b) Points of equal elevation
Description : If force act in a direction parallel to the direction of weld, then fillet weld is called as? a) Transverse b) Longitudinal c) Parallel d) Longitudinal or Parallel
Last Answer : d) Longitudinal or Parallel
Description : In R.C. sewer pipes, the percentage longitudinal reinforcement to the cross-sectional area of concrete is kept A. 10.0 B. 5.0 C. 2.0 D. 0.25
Last Answer : ANS: D
Description : Distribution reinforcement in a simply supported slab, is provided to distribute (A) Load (B) Temperature stress (C) Shrinkage stress (D) All the above
Description : in a simply supported slab, the pitch of distribution reinforcement should not be more than_____________the effective depth of slab or 60cm which ever is smaller. (a) Double (b) Three times (c) Five times (d) Six times
Last Answer : (c) Five times
Description : The diameter of bars used for distribution reinforcement in slabs, may vary from (a) 2 to 4mm (b) 4 to 6mm (c) 6mm to 8mm (d) 8 to 12mm
Last Answer : (c) 6mm to 8mm
Description : If high yield strength deformed bars are used, the are of distribution reinforcement in slabs, should not less than. (a) 0.12% of the gross area of concrete (b) 0.15% of the gross area of concrete (c) 0.18% of the gross area of concrete (d) 0.20% of the gross area of concrete
Last Answer : (a) 0.12% of the gross area of concrete
Description : If plain bars are used, the area of distribution reinforcement in slabs should not less than (a) 0.12% of the gross area f concrete (b) 0.15% of the gross area of concrete (c) 0.18% of the gross area of concrete (d) 0.20% of the gross area of concrete
Last Answer : (b) 0.15% of the gross area of concrete
Description : can mechanical waves be both transverse and longitudinal?
Last Answer : mechanical waves can be both transverse and longitudinal, but all electromagnetic waves are transverse.
Description : Are longitudinal waves traveling through the ground transverse?
Last Answer : Feel Free to Answer
Description : Which term describes the distance between any two crest in a transverse wave or the distance between any two rarefaction's in a longitudinal wave?
Last Answer : wavelength
Description : The most common mode of cell division in bacteria is a. Binary fission b. Transverse binary fission c. Longitudinal binary fission d. None of these
Last Answer : Ans: C
Description : Sound waves in air are (a) Transverse (b) Longitudinal (c) Electromagnetic (d) Polarised
Last Answer : Ans:(b)
Description : Energy is not carried by (a) Transverse progressive waves (b) Longitudinal progressive waves (c) Stationary waves (d) Electromagnetic waves
Last Answer : Ans:(c)
Description : Stationary wave is formed by – (1) a transverse wave superposing a longitudinal wave (2) two waves of the same speed superposing (3) two waves of same frequency travelling in the same direction (4) two waves of same frequency travelling in the opposite direction
Last Answer : (4) two waves of same frequency travelling in the opposite direction Explanation: Stationary or standing waves are formed in a medium when two waves having equal amplitude and frequency moving in ... and the reflected wave. Both longitudinal and transverse types of waves can form a stationary wave.
Description : Which of these waves can be polarized? (1) Sound waves in air (2) Longitudinal waves on a string (3) Transverse waves on a string (4) Light waves
Last Answer : (4) Light waves Explanation: It is possible to transform unpolarized light into polarized light. A light. wave that is vibrating in more than one plane is referred to as unpolarized light. Polarized light waves are light waves in which the vibrations occur in a single plane.
Description : X- rays are ______ waves. (1) Longitudinal (2) Transverse (3) Electromagnetic (4) Elastic
Last Answer : (3) Electromagnetic Explanation: X-rays are a form of electromagnetic radiation as are radio waves.
Description : When a stone is thrown in the calm water of a pond the waves produced on the surface of water in the pond are – (1) longitudinal (2) transverse (3) both longitudinal and transverse (4) waves are not produced
Last Answer : (2) transverse Explanation: The waves produced on the surface of water in the pond is an example of transverse waves as particles of the medium do not move along with the wave. Only the disturbance is carried forward. Another example of such waves is the vibrations of a string.
Description : Sound waves in air are ______. (1) transverse (2) longitudinal (3) electromagnetic (4) polarised
Last Answer : (2) longitudinal Explanation: Sound can propagate through compressible media such as air, water and solids as longitudinal waves and also as a transverse wave in solids.
Description : Matter waves are – (1) de Broglie waves (2) Electromagnetic waves (3) Transverse waves (4) Longitudinal waves
Last Answer : (1) de Broglie waves Explanation: In mechanics, matter waves or de Broglie waves reflects the wave-particle duality of matter. The de Broglie relations show that the wavelength is inversely proportional to the momentum of a particle and is also called de Broglie wavelength.
Description : Longitudinal waves and Transverse waves are types of - (1) Mechanical waves (2) Non-Mechanical waves (3) Both of above (4) None of Above
Last Answer : (1) Mechanical waves Explanation: Mechanical Waves are waves which propagate through a material medium (solid, liquid, or gas) at a wave speed which depends on the elastic and inertial properties of that medium.
Description : Distinguish between transverse waves and longitudinal waves.
Last Answer : Transverse waves 1. Particles vibrate in the direction perpendicular to the direction of wave propagation. 2. The wave propagates in the form of crests and troughs. 3. One crest and one ... and one rarefaction constitute a wave. Ex: Sound waves, vibration in gases, oscillation of spring.
Description : The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in A Transverse vibrations B Torsional vibrations C Longitudinal vibrations D None of the mentioned
Last Answer : A Transverse vibrations
Description : Which of the following is a type of free vibration? A Longitudinal vibrations B Transverse vibrations C Torsional vibrations D A, B and C
Last Answer : D A, B and C
Description : When the particles of the shaft or disc move in a circle about the axis of the shaft, then the vibrations are known as ___________ . A Longitudinal vibrations B Transverse vibrations C Torsional vibrations D None of these
Last Answer : C Torsional vibrations
Description : The vibrations perpendicular to the shaft axis are known as A Transverse B Longitudinal C Torsional D None of the mentioned
Last Answer : A Transverse
Description : For the same dimensions of the shaft which of the following has the greater natural frequency? A. Transverse B. Longitudinal C. Depends on thickness D. Depends upon length
Last Answer : B. Longitudinal
Description : When the particles of the shaft or disc move in a circle about the axis of the shaft, then the vibrations are known as ___________ . A. longitudinal vibrations B. transverse vibrations C. torsional vibrations D. none of these
Last Answer : C. torsional vibrations
Description : Which of the following is a type of free vibration? A. Longitudinal vibrations B. Transverse vibrations C. Torsional vibrations D. A, B and C
Last Answer : D. A, B and C
Description : Critical speed of shaft and disc system A) Is equal to natural frequency of the system in transverse vibration B) Is equal to natural frequency of the system in torsional vibration C) Is ... of the system in longitudinal vibration D) Bears no relationship to any of the system natural frequency
Last Answer : A) Is equal to natural frequency of the system in transverse vibration
Description : If the particle of a body vibrate along a circular arc, whose centre lies on the axis of the shaft then the body is said to have A) Transverse vibration B) Longitudinal vibration C) Torsional vibration D) None of the above
Last Answer : C) Torsional vibration
Description : Which of the following is a type of free vibration? ( A ) Longitudinal vibrations ( C ) Torsional vibrations D ( B ) Transverse vibrations ( D ) A, B and C
Last Answer : ( D ) A, B and C
Description : The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in a) transverse vibrations b) torsional vibrations c) longitudinal vibrations d) none of the mentioned
Last Answer : a) transverse vibrations
Description : For the same dimensions of the shaft which of the following has the greater natural frequency? (A) Transverse (B) Longitudinal (C) Depends on thickness (D) Depends upon length
Last Answer : (B) Longitudinal
Description : For the same dimensions of the shaft which of the following has the greater natural frequency? a) Transverse b) Longitudinal c) Depends on thickness d) Depends upon length
Last Answer : b) Longitudinal
Description : For the same dimensions of a beam, transverse vibrations have a lower frequency than longitudinal frequency.a) True b) False
Last Answer : a) True