A counter may be defined as an imaginary line passing through (a) Points on the longitudinal section (b) Points of equal elevation (c) Point of equal local ground slope (d) Points of transverse section surveys

A counter may be defined as an imaginary line passing through
(a) Points on the longitudinal section
(b) Points of equal elevation
(c) Point of equal local ground slope
(d) Points of transverse section surveys
by

1 Answer

Answer :

(b) Points of equal elevation
by

Related questions

Imaginary line passing through points having equal magnetic declination is termed as (A) Isogon (B) Agonic line (C) Isoclinic line (D) None of these

Description : Imaginary line passing through points having equal magnetic declination is termed as (A) Isogon (B) Agonic line (C) Isoclinic line (D) None of these

Last Answer : (A) Isogon

An imaginary line joining the points of equal elevation on the surface of the earth, represents (A) Contour surface (B) Contour gradient (C) Contour line (D) Level line

Description : An imaginary line joining the points of equal elevation on the surface of the earth, represents (A) Contour surface (B) Contour gradient (C) Contour line (D) Level line

Last Answer : (C) Contour line

If the formation level of a highway has a uniform gradient for a particular length, and the ground is also having a longitudinal slope, the earthwork may be calculated by (A) Mid-section formula (B) Trapezoidal formula (C) Prismoidal formula (D) All the above

Description : If the formation level of a highway has a uniform gradient for a particular length, and the ground is also having a longitudinal slope, the earthwork may be calculated by (A) Mid-section formula (B) Trapezoidal formula (C) Prismoidal formula (D) All the above

Last Answer : (D) All the above

An isobar is a line which connects all points below the ground surface at which (a) The local ground elevation is same (b) The settlement is same (c) The vertical stress is the same (d) The ground elevation is varying

Description : An isobar is a line which connects all points below the ground surface at which (a) The local ground elevation is same (b) The settlement is same (c) The vertical stress is the same (d) The ground elevation is varying

Last Answer : (c) The vertical stress is the same

Determining the difference in elevation between two points on the surface of the earth, is known as (A) Levelling (B) Simple levelling (C) Differential levelling (D) Longitudinal levelling

Description : Determining the difference in elevation between two points on the surface of the earth, is known as (A) Levelling (B) Simple levelling (C) Differential levelling (D) Longitudinal levelling

Last Answer : (C) Differential levelling

The imaginary line passing through the intersection of cross hairs and the optical centre of the objective, is known as (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Description : The imaginary line passing through the intersection of cross hairs and the optical centre of the objective, is known as (A) Line of sight (B) Line of collimation (C) Axis of the telescope (D) None of these

Last Answer : (B) Line of collimation

Are longitudinal waves traveling through the ground transverse?

Description : Are longitudinal waves traveling through the ground transverse?

Last Answer : Feel Free to Answer

If B is the width of formation, d is the height of the embankment, side slope S : 1, for a highway with no transverse slope, the area of cross-section is (A) B + d + Sd (B) Bd + Sd2 (C) B × d - Sd1/2 (D) ½ (Bd + Sd2

Description : If B is the width of formation, d is the height of the embankment, side slope S : 1, for a highway with no transverse slope, the area of cross-section is (A) B + d + Sd (B) Bd + Sd2 (C) B × d - Sd1/2 (D) ½ (Bd + Sd2

Last Answer : (B) Bd + Sd2

Contour line is the imaginary line joining places of equal : (1) Rainfall (2) Humidity (3) Elevation (4) Temperature

Description : Contour line is the imaginary line joining places of equal : (1) Rainfall (2) Humidity (3) Elevation (4) Temperature

Last Answer : (3) Elevation Explanation: Contour line is a line on a map or chart joining points of equal height (elevation) or depth. Closely spaced contour lines indicate a steeper grade than the more loosely spaced lines.

Contour line is the imaginary line joining places of equal : (1) Rainfall (2) Humidity (3) Elevation (4) Temperature

Description : Contour line is the imaginary line joining places of equal : (1) Rainfall (2) Humidity (3) Elevation (4) Temperature

Last Answer : Elevation

Pick up the correct statement from the following (A) The contour lines having the same elevation cannot unite and continue as one line (B) A contour can not end abruptly, but must ultimately close itself not necessarily within the limits of map (C) The direction of steepest slope at a point on a contour is at right angles to the contour (D) All the above

Description : Pick up the correct statement from the following (A) The contour lines having the same elevation cannot unite and continue as one line (B) A contour can not end abruptly, but must ultimately close itself not ... slope at a point on a contour is at right angles to the contour (D) All the above

Last Answer : (D) All the above

The reduced levels of points, 30 metres apart along the longitudinal section of a road portion between chainages 5 and 9 are shown in the given figure. If there is a uniform up-gradient of the road 120 in 1, the chainage of the point with no filling or cutting is (A) (6 + 15) chains (B) (6 + 12) chains (C) (6 + 18) chains (D) None of these

Description : The reduced levels of points, 30 metres apart along the longitudinal section of a road portion between chainages 5 and 9 are shown in the given figure. If there is a uniform up-gradient of the road 120 in 1, the chainage ... 15) chains (B) (6 + 12) chains (C) (6 + 18) chains (D) None of these

Last Answer : (B) (6 + 12) chains

Pick up the correct statement from the following: (A) The horizontal angle between magnetic meridian and true meridian at a place is called magnetic declination or variance of the compass (B) The imaginary lines which pass through points at which the magnetic declinations are equal at a given time are called isogonic lines (C) The isogonic lines through places at which the declination is zero are termedagonic lines (D) All the above

Description : Pick up the correct statement from the following: (A) The horizontal angle between magnetic meridian and true meridian at a place is called magnetic declination or variance of the compass (B) The ... lines through places at which the declination is zero are termedagonic lines (D) All the above

Last Answer : (D) All the above

First operation during the detailed survey of a hill road, is (A) Hydrological and soil surveys (B) Adjustment of alignment along with curves (C) Derivation of longitudinal and cross-sections (D) Fixation of Bench Marks

Description : First operation during the detailed survey of a hill road, is (A) Hydrological and soil surveys (B) Adjustment of alignment along with curves (C) Derivation of longitudinal and cross-sections (D) Fixation of Bench Marks

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The directions of plumb lines suspended at different points in a survey are not strictly parallel (B) In surveys of small extent, the effect of curvature may be ignored and the level surface of the earth is assumed as horizontal (C) In surveys of large extent, the effect of curvature of the earth must be considered (D) All the above

Description : Pick up the correct statement from the following: (A) The directions of plumb lines suspended at different points in a survey are not strictly parallel (B) In surveys of small extent, the effect of ... of large extent, the effect of curvature of the earth must be considered (D) All the above

Last Answer : (D) All the above

Best side slope for most economical trapezoidal section in open channel flow, wherein side slopes are defined by : X horizontal to 1 vertical, is when X equals : (a) 0.404 (b) 0.500 (c) 0.577 (d) 0.673

Description : Best side slope for most economical trapezoidal section in open channel flow, wherein side slopes are defined by : X horizontal to 1 vertical, is when X equals : (a) 0.404 (b) 0.500 (c) 0.577 (d) 0.673

Last Answer : (c) 0.577

The spacing of transverse reinforcement of column is decided by the following consideration. (A) The least lateral dimension of the column (B) Sixteen times the diameter of the smallest longitudinal reinforcing rods in the column (C) Forty-eight times the diameter of transverse reinforcement (D) All the above

Description : The spacing of transverse reinforcement of column is decided by the following consideration. (A) The least lateral dimension of the column (B) Sixteen times the diameter of the smallest longitudinal ... column (C) Forty-eight times the diameter of transverse reinforcement (D) All the above

Last Answer : Answer: Option D

Minimum pitch of transverse reinforcement in a column is (A) The least lateral dimension of the member (B) Sixteen times the smallest diameter of longitudinal reinforcement bar to be tied (C) Forty-eight times the diameter of transverse reinforcement (D) Lesser of the above three values

Description : Minimum pitch of transverse reinforcement in a column is (A) The least lateral dimension of the member (B) Sixteen times the smallest diameter of longitudinal reinforcement bar to be tied (C) Forty-eight times the diameter of transverse reinforcement (D) Lesser of the above three values

Last Answer : Answer: Option D

The distribution reinforcement is also called ________________reinforcement. (a) Longitudinal (b) Transverse (c) Main (d) None of the these

Description : The distribution reinforcement is also called _______________reinforcement. (a) Longitudinal (b) Transverse (c) Main (d) None of the these

Last Answer : (b) Transverse

The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Description : The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ D ] i, ii and iii

The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Description : The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ D ] i, ii and iii

The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in A Transverse vibrations B Torsional vibrations C Longitudinal vibrations D None of the mentioned

Description : The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in A Transverse vibrations B Torsional vibrations C Longitudinal vibrations D None of the mentioned

Last Answer : A Transverse vibrations

Critical speed of shaft and disc system A) Is equal to natural frequency of the system in transverse vibration B) Is equal to natural frequency of the system in torsional vibration C) Is equal to natural frequency of the system in longitudinal vibration D) Bears no relationship to any of the system natural frequency

Description : Critical speed of shaft and disc system A) Is equal to natural frequency of the system in transverse vibration B) Is equal to natural frequency of the system in torsional vibration C) Is ... of the system in longitudinal vibration D) Bears no relationship to any of the system natural frequency

Last Answer : A) Is equal to natural frequency of the system in transverse vibration

The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in a) transverse vibrations b) torsional vibrations c) longitudinal vibrations d) none of the mentioned

Description : The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in a) transverse vibrations b) torsional vibrations c) longitudinal vibrations d) none of the mentioned

Last Answer : a) transverse vibrations

The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in a) transverse vibrations b) torsional vibrations c) longitudinal vibrations d) none of the mentioned

Description : The critical speed of a shaft with a disc supported in between is equal to the natural frequency of the system in a) transverse vibrations b) torsional vibrations c) longitudinal vibrations d) none of the mentioned

Last Answer : a) transverse vibrations

The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Description : The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Last Answer : (A) Chain surveying

Isohyets are the imaginary lines joining the points of equal (A) Pressure (B) Height (C) Humidity (D) Rainfall

Description : Isohyets are the imaginary lines joining the points of equal (A) Pressure (B) Height (C) Humidity (D) Rainfall

Last Answer : Answer: Option D

An imaginary line lying throughout the surface of ground and preserving a constant inclination to the horizontal is known as (A) Contour line (B) Horizontal equivalent (C) Contour interval (D) Contour gradient

Description : An imaginary line lying throughout the surface of ground and preserving a constant inclination to the horizontal is known as (A) Contour line (B) Horizontal equivalent (C) Contour interval (D) Contour gradient

Last Answer : (D) Contour gradient

Equator represents – (1) line joining North and South poles (2) imaginary line passing round the Earth midway between North & South poles (3) a belt (ring) around the planet Saturn (4) axis of rotation of Earth

Description : Equator represents – (1) line joining North and South poles (2) imaginary line passing round the Earth midway between North & South poles (3) a belt (ring) around the planet Saturn (4) axis of rotation of Earth

Last Answer : (2) imaginary line passing round the Earth midway between North & South poles Explanation: An equator is the intersection of a sphere's surface with the plane perpendicular to the sphere ... astronomical bodies have equators similarly defined. The length of the Equator is roughly 40,075 kilometres.

Equator represents (1) line joining North and South poles (2) imaginary line passing round the Earth midway between North & South poles (3) a belt (ring) around the planet Saturn (4) axis of rotation of Earth

Description : Equator represents (1) line joining North and South poles (2) imaginary line passing round the Earth midway between North & South poles (3) a belt (ring) around the planet Saturn (4) axis of rotation of Earth

Last Answer : imaginary line passing round the Earth midway between North & South poles

If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2(D) D/6m(h1 - h2)3

Description : If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2 (D) D/6m(h1 - h2)3

Last Answer : (C) D/6m(h1 - h2)2

The R.L. of ground water table on the sides of a valley is 1505 m whereas R.L. of the stream water is 1475 m. If 60° slope consists of pervious soil between R.L. 1485 m to 1500 m, the gravity spring may be expected at the point of reduced level (A) 1500 m (B) 1505 m (C) 1475 m (D) 1485 m

Description : The R.L. of ground water table on the sides of a valley is 1505 m whereas R.L. of the stream water  is 1475 m. If 60° slope consists of pervious soil between R.L. 1485 m to 1500 m, the gravity spring  may ... of reduced level  (A) 1500 m  (B) 1505 m  (C) 1475 m  (D) 1485 m 

Last Answer : (D) 1485 m 

0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre(B) In the standard rolled channels, the shear centre is on the horizontal line passing through and away from the C.G. beyond web (C) In equal angles, the shear centre is on the horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Description : 0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre (B) In the standard rolled channels, the shear centre ... horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Last Answer : (D) All the above

What is meant by the term antenna bandwidth A. Antenna length divided by the number of elements. B. The angle between the half-power radiation points C. The frequency range over which and antenna can be expected to perform well D. The angle formed between two imaginary line drawn through the ends of the elements

Description : What is meant by the term antenna bandwidth A. Antenna length divided by the number of elements. B. The angle between the half-power radiation points C. The frequency range over which and antenna ... perform well D. The angle formed between two imaginary line drawn through the ends of the elements

Last Answer : C. The frequency range over which and antenna can be expected to perform well

Where to Find the slope of the line passing through (5 -1) and (4 -5)?

Description : Where to Find the slope of the line passing through (5 -1) and (4 -5)?

Last Answer : slope = change in y / change in x= (-5 - -1)/(4 - 5)= -4/-1= 4

What is the slope of the line passing through (5 5) and (-4 5).?

Description : What is the slope of the line passing through (5 5) and (-4 5).?

Last Answer : The slope is -9.

What is the slope of the line passing through (6 -3) and (8 0).?

Description : What is the slope of the line passing through (6 -3) and (8 0).?

Last Answer : Points: (6, -3) and (8, 0)Slope: 3/2

What is the slope of the line passing through (5 5) and (-4 5).?

Description : What is the slope of the line passing through (5 5) and (-4 5).?

Last Answer : The slope is -9.

Before providing super-elevation on roads, the portion of the carriageway between the crown and the outer edge is made (A) To have a reduced fall (B) Horizontal (C) To have slope of the camber on the other half of the carriageway (D) None of these

Description : Before providing super-elevation on roads, the portion of the carriageway between the crown and the outer edge is made (A) To have a reduced fall (B) Horizontal (C) To have slope of the camber on the other half of the carriageway (D) None of these

Last Answer : Answer: Option C

The transverse section of a plant shows following anatomical features : (i) Large number of scattered vascular bundles surrounded by bundle sheath (ii) Large conspicuous parenchymatous ground tissue (iii)vascular bundles conjoint and closed (iv) phloem parenchyma absent Identify the category of plant and its part. (a) Monocotyledonous stem (b) Monocotyledonous root (c) Dicotyledonous stem (d) Dicotyledonous root

Description : The transverse section of a plant shows following anatomical features : (i) Large number of scattered vascular bundles surrounded by bundle sheath (ii) Large conspicuous parenchymatous ground ... (a) Monocotyledonous stem (b) Monocotyledonous root (c) Dicotyledonous stem (d) Dicotyledonous root

Last Answer : (a) Monocotyledonous stem

If the elevations along a road increase, the slope of the road along the longitudinal direction, is known as (A) Gradient (B) Grade (C) Positive grade (D) Negative grade

Description : If the elevations along a road increase, the slope of the road along the longitudinal direction, is known as (A) Gradient (B) Grade (C) Positive grade (D) Negative grade

Last Answer : Answer: Option A

Two different channels, M and N, in two different sites are designed based on Lacey’s theory, to carry same quantum of discharge. But the bed material of M is found to be finer than that of N. a) Channel M will have steeper longitudinal slope b) Channel N will have steeper longitudinal slope c) Channels M and N can have same longitudinal slopes d) Silting is more in M than in N

Description : Two different channels, M and N, in two different sites are designed based on Lacey's theory, to carry same quantum of discharge. But the bed material of M is found to be finer than that of N. a) ... slope c) Channels M and N can have same longitudinal slopes d) Silting is more in M than in N

Last Answer : b) Channel N will have steeper longitudinal slope

The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of 4 tonnes at the centre. The maximum stress in the bottom most fibre at the mid span section, is (A) 13.33 kg/cm2 tensile (B) 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Description : The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of ... 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Last Answer : (C) 26.67 kg/cm2 tensile

The intensity of direct longitudinal stress in the cross-section at any point distant r from the neutral axis, is proportional to (A) r (B) 1/r (C) r2 (D) 1/r²

Description : The intensity of direct longitudinal stress in the cross-section at any point distant r from the neutral axis, is proportional to (A) r (B) 1/r (C) r2 (D) 1/r²

Last Answer : (A) r

What is a line connecting points of equal elevation?

Description : What is a line connecting points of equal elevation?

Last Answer : property line

determining stresses in frames by methods of sections, the frame is divided into two parts by an imaginary section drawn in such a way as not to cut more than (A) Two members with unknown forces of the frame (B) Three members with unknown forces of the frame (C) Four members with unknown forces of the frame (D) Three members with known forces of the frame

Description : determining stresses in frames by methods of sections, the frame is divided into two parts by an imaginary section drawn in such a way as not to cut more than (A) Two members with unknown forces ... C) Four members with unknown forces of the frame (D) Three members with known forces of the frame

Last Answer : (B) Three members with unknown forces of the frame

can mechanical waves be both transverse and longitudinal?

Description : can mechanical waves be both transverse and longitudinal?

Last Answer : mechanical waves can be both transverse and longitudinal, but all electromagnetic waves are transverse.

Which term describes the distance between any two crest in a transverse wave or the distance between any two rarefaction's in a longitudinal wave?

Description : Which term describes the distance between any two crest in a transverse wave or the distance between any two rarefaction's in a longitudinal wave?

Last Answer : wavelength

The most common mode of cell division in bacteria is a. Binary fission b. Transverse binary fission c. Longitudinal binary fission d. None of these

Description : The most common mode of cell division in bacteria is a. Binary fission b. Transverse binary fission c. Longitudinal binary fission d. None of these

Last Answer : Ans: C

Sound waves in air are (a) Transverse (b) Longitudinal (c) Electromagnetic (d) Polarised

Description : Sound waves in air are (a) Transverse (b) Longitudinal (c) Electromagnetic (d) Polarised

Last Answer : Ans:(b)