The limits of percentage p of the longitudinal reinforcement in a column is given by
(A) 0.15% to 2%
(B) 0.8% to 4%
(C) 0.8% to 6%
(D) 0.8% to 8%

1 Answer

Answer :

Answer: Option C

Related questions

Description : Maximum percentage of longitudinal steel in a column should be less than [ A ] 6% [ B ] 8% [ C ] 9% [ D ] 10%

Last Answer : [ B ] 8%

Description : SBI has been named as domestic systemically important banks (D-SIBs) this year. What additional capital it will have to maintain as a percent of loans and investments? A) 0.2% B) 0.4% C) 0.6% D) 0.8% E) None of these

Last Answer : C) 0.6% Explanation: Based on the methodology announced by the central bank, SBI will need to maintain additional capital equivalent to 0.6 per cent of its loans and investments while ICICI will need to maintain 0.2 per cent more.

Description : As per IS : 456, the reinforcement in a column should not be less than (A) 0.5% and not more than 5% of cross-sectional area (B) 0.6% and not more than 6% of cross-sectional area (C) 0.7% and not more than 7% of cross-sectional area (D) 0.8% and not more than 8% of cross-sectional area

Last Answer : Answer: Option D

Description : Which of the following statements is incorrect? (A) Minimum cross sectional area of longitudinal reinforcement in a column is 0.8% (B) Spacing of longitudinal bars measured along the periphery of ... (D) The number of longitudinal bars provided in a circular column should not be less than four

Last Answer : Answer: Option D

Description : Earthquakes and tsunamis constitute disaster percentage = ..? a. 8% b. 4% c. 6% d. 17%

Last Answer : a. 8%

Description : If the compression ratio of an engine working on Otto cycle is increased from 5 to 7 the percentage increase in efficiency will be a. 2% b. 4% c. 8% d. 14%

Last Answer : ANSWER d. 14%

Description : Select the incorrect statement from the following [ A ] Reinforcing bars in a column should not be less than 12 mm in diameter [ B ] The number of longitudinal bars in a circular column should not ... The minimum percentage of longitudinal steel in columns should be 0.8% [ D ] None of the above

Last Answer : [ B ] The number of longitudinal bars in a circular column should not exceed four

Description : The maximum amount of chlorides and sulphates should not be more than [ A ] 0.15% and 4% by mass of cement respectively [ B ] 4% and 0.15% by mass of cement respectively [ C ] 0.30% and 2% by mass of cement respectively [ D ] 2% and 0.30% by mass of cement respectively

Last Answer : [ A ] 0.15% and 4% by mass of cement respectively

Description : The maximum amount of chlorides and sulphates should not be more than [ A ] 0.15% and 4% by mass of cement respectively [ B ] 4% and 0.15% by mass of cement respectively [ C ] 0.30% and 2% by mass of cement respectively [ D ] 2% and 0.30% by mass of cement respectively

Last Answer : [ A ] 0.15% and 4% by mass of cement respectively

Description : 39. India is one of the twelve Mega diversity countries in the world due to ... e) Having 2.5% of the land area and 8.2% global species diversity. f) Having 2.4% of the land area and 8. ... area and 8.3% global species diversity. h) Having 2.4% of the land area and 8.2% global species diversity.

Last Answer : f) Having 2.4% of the land area and 8.1% global species diversity.

Description : 19. India is one of the twelve Mega diversity countries in the world due to ... a) Having 2.5% of the land area and 8.2% global species diversity. b) Having 2.4% of the land area and 8.1% ... area and 8.3% global species diversity. d) Having 2.4% of the land area and 8.2% global species diversity.

Last Answer : b) Having 2.4% of the land area and 8.1% global species diversity.

Description : The carbohydrate content of Ig M is about (A) 2.8% (B) 6.4% (C) 8.0% (D) 10.2%

Last Answer : Answer : D

Description : Present rate of interested on on 1, 2, 4, 5 years fixed deposit(TD) is a) 6.25%, 6.50%, 7.25%, 7.50% b) 7.25%, 7.50%, 8%, 8.2% c) 8.2%, 8.3%, 8.4%, 8.5% d) None of these

Last Answer : c) 8.2%, 8.3%, 8.4%, 8.5%

Description : According to 2017 census what is the share of Balochistan in the total Population of Pakistan A. 15% B. 5% C. 2% D. 6%

Last Answer : ANSWER: D

Description : According to 2017 census what is the share of Balochistan in the total Population of Pakistan A. 15% B. 5% C. 2% D. 6%

Last Answer : ANSWER: D

Description : The spacing of transverse reinforcement of column is decided by the following consideration. (A) The least lateral dimension of the column (B) Sixteen times the diameter of the smallest longitudinal ... column (C) Forty-eight times the diameter of transverse reinforcement (D) All the above

Last Answer : Answer: Option D

Description : Minimum pitch of transverse reinforcement in a column is (A) The least lateral dimension of the member (B) Sixteen times the smallest diameter of longitudinal reinforcement bar to be tied (C) Forty-eight times the diameter of transverse reinforcement (D) Lesser of the above three values

Last Answer : Answer: Option D

Description : In the total proteins percentage of α1 globulin is about (A) 0.2–1.2% (B) 1.2–2.0% (C) 2.4–4.4% (D) 5.0–10.0%

Last Answer : Answer : C

Description : The percentage increase in power consumption of a compressor with suction side air filter and with the pressure drop across the filter of 200 mmWc is ____ a) 1.0% b) 3% c) 2.4% d) 1.6% 

Last Answer : d) 1.6%

Description : Number of students in 4th and 5th class is in the ratio 6 : 11. 40% in class 4 are girls and 48% in class 5 are girls. What percentage of students in both the classes are boys? A) 62.5% B) 54.8% C) 52.6% D) 55.8% E) 53.5%

Last Answer : Answer: B Total students in both = 6x+11x = 17x Boys in class 4 = (60/100)*6x = 360x/100 Boys in class 5 = (52/100)*11x = 572x/100 So total boys = 360x/100 + 572x/100 = 932x/100 = 9.32x % of boys = [9.32x/17x] * 100=54.8%

Description : What is the percentage error when 3 resistors with ratings 100 Ω at 5%, 150 Ω at 6% and 250 Ω at 8% respectively, are connected in series? A) 6.33% B) 6.80% C) 19% D) None of these

Last Answer : What is the percentage error when 3 resistors with ratings 100 Ω at 5%, 150 Ω at 6% and 250 Ω at 8% respectively, are connected in series? A) 6.33% B) 6.80% C) 19% D) None of these

Description : In an experiment, the percentage of error occurred in the measurement of physical quantities A, B, C and D are 1%, 2%, 3% and 4% respectively.

Last Answer : In an experiment, the percentage of error occurred in the measurement of physical quantities A, B, C and D are 1%, 2%, ... % (C) (3/13) % (D) 16 %

Description : To be a regional party the minimum percentage of votes, that a party needs to secure in any election is (1) 2% (2) 3% (3) 4% (4) 5%

Last Answer : 2) 3% Explanation: According to the rules, a party has to win three percent of the total number of seats in a state assembly to become a regional party. In October 2011, the Election Commission ( ... the total valid votes polled in a state in addition to winning at least two seats in that Assembly.

Description : What percentage of the cell is made up of carbohydrates a. 1% b. 2% c. 3% d. 4%

Last Answer : 1%

Description : A shopkeeper marked a suit at Rs.400. He sold it after allowing a discount, and still made at a profit of 25%. At what percentage above its cost price did he marked the suit, if he sold it for Rs.320? a)50% b)66 2/3% c)62 1/2% d)56 1/4%

Last Answer : d)56 1/4%

Description : Nandu purchased a mobile phone and got a discount of 5% from dealer. he sold that mobile phone at a profit of 10% on his purchase price. What is the percentage profit on actual price of the mobile phone? 1. 2% 2. 3% 3. 4% 4. 4.5 %

Last Answer : 4. 4.5 %

Description : 15. Find the simple interest and the amount when: (a) Principal = Rs 6400, rate = 6% p.a. and time = 2 years (b)Principal = Rs 2650, rate = 8% p.a. and time = 212212 years?

Last Answer : when followed by a vowel sound or used as an emphatic form

Description : In R.C. sewer pipes, the percentage longitudinal reinforcement to the cross-sectional area of concrete is kept A. 10.0 B. 5.0 C. 2.0 D. 0.25

Last Answer : ANS: D

Description : Sanki purchased 20 dozen notebook at Rs. 48 per dozen. He sold 8 dozen at 10% profit and remaining 12 dozen with 20% profit. What is his profit percentage in the transaction? A. 8% B. 15% C. 16% D. 19% 

Last Answer : Answer – C (16%) Explanation – C.P of 20 dozen = Rs.(48 x 20) = Rs.960 C.P of 8 dozen = Rs. (48 x8) = Rs. 384. C.P of 12 dozen =Rs. (960 – 384) = Rs. 576 Total S.P = Rs. (110/100 x 384 +120/100 x 576) = Rs.1113.60 ∴ Profit % = (153.60/960 x 100)% =16%

Description : Minimum percentage of longitudinal steel in a column should not be less than [ A ] 0.60% [ B ] 0.80% [ C ] 1.00% [ D ] 1.20%

Last Answer : [ B ] 0.80%

Description : Side face reinforcement shall not exceed [ A ] 0.1% of total cross sectional area [ B ] 0.2% of total cross sectional area [ C ] 0.1% web area [ D ] 0.2 % web area.

Last Answer : [ C ] 0.1% web area

Description : If high yield strength deformed bars are used, the are of distribution reinforcement in slabs, should not less than. (a) 0.12% of the gross area of concrete (b) 0.15% of the gross area of concrete (c) 0.18% of the gross area of concrete (d) 0.20% of the gross area of concrete

Last Answer : (a) 0.12% of the gross area of concrete

Description : If plain bars are used, the area of distribution reinforcement in slabs should not less than (a) 0.12% of the gross area f concrete (b) 0.15% of the gross area of concrete (c) 0.18% of the gross area of concrete (d) 0.20% of the gross area of concrete

Last Answer : (b) 0.15% of the gross area of concrete

Description : Minimum reinforcement in slabs, when High yield strength deformed bars [ A ] 0.12% of gross cross sectional area [ B ] 0.15% of gross cross sectional area [ C ] 0.20% of gross cross sectional area [ D ] 0.25% of gross cross sectional area.

Last Answer : [ A ] 0.12% of gross cross sectional area

Description : Find: (i) 32% of 425 (ii) 1623% of 16 (iii) 6.5% of 400 (iv) 136% of 70 (v) 2.8% of 35 (vi) 0.6% of 45 -Maths

Last Answer : answer:

Description : Which material is suitable for shaft material? a. High speed steel b. Stainless steel or high carbon steel c. Grey cast iron d. Steel having approx. 0.4% carbon and 0.8% manganese

Last Answer : d. Steel having approx. 0.4% carbon and 0.8% manganese

Description : Interest rate on 10 year NSC is  a) 8.6% b) 8.4% c) 8.5% d) 8.9%

Last Answer : d) 8.9%

Description : When caring for a patient with an uncomplicated, mild urinary tract infection (UTI), the nurse knows that recent studies have shown which of the following drugs to be a good choice for ... to be significantly more effective than TMP-SMX in community-based patients and in nursing home residents.

Last Answer : a) Levofloxacin (Levaquin) Levofloxacin, a floroquinolone, is a good choice for short-course therapy of uncomplicated, mild to moderate UTI. Clinical trial data show high patient compliance with the 3-day regimen (95.6%) and a high eradication rate for all pathogens (96.4%).

Description : If weed population is 70/m2 and the crop 140/ m2, weed intensity would be a). 33.3% b). 66.6% c). 50% d). 73.4%

Last Answer : a). 33.3%

Description : If the count of Echinochloa in weedy check is 70 and that in a treatment 25/m2, weed control efficiency will be a). 54.3% b). 64.3% c). 73.4% d). 79.6%

Last Answer : b). 64.3%

Description : The population of a town was 200000 three years ago. If increased by 4%, 6% and 10% respectively in the last three years, then the present population of town is a) 1,10,313 b) 1,10,314 c) 2,42,528 d) 2,93,313 e) 2,10,313

Last Answer : Answer: C The present population = (1+4/100)×(1+6/100)×(1+10/100)×200000  = (104/100) × (106/100) × (110/100) × 200000  = 1.04×1.06×1.1×200000  = 2,42,528

Description : State and justify which of the following two transformers is better:  Transformer A = 4% voltage regulation  Transformer B = 6% voltage regulation

Last Answer : Transformer A with 4% voltage regulation is better.  Justification: Voltage regulation refers to the percentage change in secondary voltage when load is changed from no-load to full-load with primary voltage ... 4% voltage regulation, which is less as compared to 6% of transformer B, it is better.

Description : Maximum carbon content in welding is usually limited to a) 0.22% b) 0.8% c) 1.5% d) 2%

Last Answer : a) 0.22%

Description : If the price of coffee falls by 8% and the demand for Tea declines by 2%. The corss price elasticity of demand for Tea is (a) 0.45 ; (b) 0.25 ; (c) +0.44 ; (d) -0.30

Last Answer : (b) 0.25 ;

Description : In a singly reinforced beam, the effective depth is measured from its compression edge to (A) Tensile edge (B) Tensile reinforcement (C) Neutral axis of the beam (D) Longitudinal central axis

Last Answer : Answer: Option B

Description : Pick up the correct statement from the following: (A) Lateral reinforcement in R.C.C. columns is provided to prevent the longitudinal reinforcement from buckling (B) Lateral reinforcement prevents ... Lateral reinforcement stops breaking away of concrete cover, due to buckling (D) All the above

Last Answer : Answer: Option D

Description : The distribution reinforcement is also called _______________reinforcement. (a) Longitudinal (b) Transverse (c) Main (d) None of the these

Last Answer : (b) Transverse

Description : The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ D ] i, ii and iii

Description : The spacing of stirrups in doubly reinforced beams should be least of the following (i)Least Lateral dimension (ii)Sixteen times the diameter of longitudinal steel (iii)Forty eight times the diameter of transverse reinforcement [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ D ] i, ii and iii

Description : Pick up the assumption for the design of a pre-stressed concrete member from the following: (A) A transverse plane section remains a plane after bending (B) During deformation limits, Hook's ... of stress in reinforcement due to changes in external loading is negligible (D) All the above

Last Answer : Answer: Option D