Consider the following statements Fibre saturation point in wood is reached when 1. Free water is removed 2. Cell water is removed 3. Shrinkage of wood is rapid 4. Strength gain is rapid Which of these statements are correct? (a) 1, 2 and 3 (b) 1 and 2 only (c) 2 and 4 only (d) 1, 3 and 4

Consider the following statements
Fibre saturation point in wood is reached when
1. Free water is removed 2. Cell water is removed
3. Shrinkage of wood is rapid 4. Strength gain is rapid
Which of these statements are correct?
(a) 1, 2 and 3 (b) 1 and 2 only (c) 2 and 4 only (d) 1, 3 and 4
by

1 Answer

Answer :

(d) 1, 3 and 4
by

Related questions

Consider the following statements: Cement mortars richer than 1 : 3 are not used in masonry work because 1. There is no gain in strength of masonry 2. There is high shrinkage 3. They are prone to segregation Which of these statements are correct? (a) 1, 2 and 3 (b) 1 and 2 only (c) 2 and 3 only (d) 1 and 3 only

Description : Consider the following statements: Cement mortars richer than 1 : 3 are not used in masonry work because 1. There is no gain in strength of masonry 2. There is high shrinkage 3. They are prone to segregation Which of these statements ... 1, 2 and 3 (b) 1 and 2 only (c) 2 and 3 only (d) 1 and 3 only

Last Answer : (b) 1 and 2 only

Consider the following statements. The role of the gravel bed in a rapid sand filter is : 1. To filter out large suspended matter 2. To support the sand bed above it 3. To prevent the escape of sand particles 4. To uniformly distribute the backwash water 5. To prevent algae growth Which of the following statements are correct ? a) 1, 2, 3, 4 and 5 b) 2, 3 and 4 only c) 3, 4 and 5 only d) 1, 2 and 3 only

Description : Consider the following statements. The role of the gravel bed in a rapid sand filter is : 1. To filter out large suspended matter 2. To support the sand bed above it 3. To prevent the escape of sand particles 4. To uniformly ... and 5 b) 2, 3 and 4 only c) 3, 4 and 5 only d) 1, 2 and 3 only

Last Answer : b) 2, 3 and 4 only

Rapid hardening cement is used (a) Where high early strength is desired (b) Where form work is to be removed as early as possible (c) For construction of road pavements. (d) All of the above

Description : Rapid hardening cement is used (a) Where high early strength is desired (b) Where form work is to be removed as early as possible (c) For construction of road pavements. (d) All of the above

Last Answer : (d) All of the above

Pick up the correct statement from the following: (A) In soils, the flow index indicates variation in shear strength with water content (B) Liquid limit minus plastic limit, is known as plasticity index of the soil (C) Plastic limit minus shrinkage limit, is known as shrinkage index of the soil (D) All the above

Description : Pick up the correct statement from the following: (A) In soils, the flow index indicates variation in shear strength with water content (B) Liquid limit minus plastic limit, is known as plasticity ... Plastic limit minus shrinkage limit, is known as shrinkage index of the soil (D) All the above

Last Answer : Answer: Option D

Steady state temperature reached by a small amount of liquid evaporating into a large amount of unsaturated vapour-gas mixture is called the __________ temperature. (A) Dry-bulb (B) Wet-bulb (C) Dew point (D) Adiabatic saturation

Description : Steady state temperature reached by a small amount of liquid evaporating into a large amount of unsaturated vapour-gas mixture is called the __________ temperature. (A) Dry-bulb (B) Wet-bulb (C) Dew point (D) Adiabatic saturation

Last Answer : (B) Wet-bulb

Consider the following statements: 1. Carbonate hardness is due to bicarbonates. 2. Non-carbonate hardness is due to sulphates and chlorides of Ca and Mg. 3. Both the hardnesses can be removed by lime-soda method. 4. Both the hardnesses can be removed by ion-exchange method. Which of these statements are correct? (a) 1, 2 & 3 only (b) 1, 2 & 4 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Description : Consider the following statements: 1. Carbonate hardness is due to bicarbonates. 2. Non-carbonate hardness is due to sulphates and chlorides of Ca and Mg. 3. Both the hardnesses can be removed by lime-soda method. 4. Both the hardnesses can be ... (b) 1, 2 & 4 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Last Answer : (a) 1, 2 & 3 only

Consider the following statements: 1. Dry rot in sap wood is caused by fungal attack 2. Brown rot in coniferous woods is a result of fungal attack 3. Alternate wetting and drying of unseasoned timber causes ‘powdery’ form of decay in wood. Which of these statements are correct? (a) 1, 2 and 3 b)1 and 2 only c)2 and 3 only d)1 and 3 only

Description : Consider the following statements: 1. Dry rot in sap wood is caused by fungal attack 2. Brown rot in coniferous woods is a result of fungal attack 3. Alternate wetting and drying of unseasoned timber causes powdery' form of decay in ... ? (a) 1, 2 and 3 b)1 and 2 only c)2 and 3 only d)1 and 3 only

Last Answer : (a) 1, 2 and 3

Which one of the following statements is not correct with respect to PSC beams? (a) Loss due to shrinkage is proportional to water-cement ratio used in concrete (b) Loss due to creep is proportional to the age of the member at the time of loading. (c) Loss due to elastic deformation is directly proportionally to the modulus of elasticity of concrete (d) Loss due to friction occurs in post tensioned concrete members

Description : Which one of the following statements is not correct with respect to PSC beams? (a) Loss due to shrinkage is proportional to water-cement ratio used in concrete (b) Loss due to creep is ... to the modulus of elasticity of concrete (d) Loss due to friction occurs in post tensioned concrete members

Last Answer : (c) Loss due to elastic deformation is directly proportionally to the modulus of elasticity of concrete

The cracks caused by shrinkage of the exterior surface of the wood exposed to atmosphere, are called: (A) Radial shakes (B) Heart shakes (C) Wind cracks (D) Twisted fib

Description : The cracks caused by shrinkage of the exterior surface of the wood exposed to atmosphere, are called: (A) Radial shakes (B) Heart shakes (C) Wind cracks (D) Twisted fib

Last Answer : Answer: Option C

Consider the following statements: 1. For a saturated soil, Skempton’s B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing strength in case of dense sand. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. For a saturated soil, Skempton's B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing ... 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (a) 1, 2 & 3

Consider the following statements: For pure clay, the shear strength parameters will be 1. Cohesion c = 0; and angle of internal friction  will be maximum. 2. Cohesion c is maximum; and angle of internal friction  is also maximum. 3. Angle of internal friction  is zero, with some value of cohesion c. Which of these statements is/are correct? (a) 1, 2 & 3 (b) 1 only (c) 3 only (d) 2 only

Description : Consider the following statements: For pure clay, the shear strength parameters will be 1. Cohesion c = 0; and angle of internal friction  will be maximum. 2. Cohesion c is maximum; and angle of internal friction  is also maximum. ... is/are correct? (a) 1, 2 & 3 (b) 1 only (c) 3 only (d) 2 only

Last Answer : (c) 3 only

Consider the following statements relating to foundations on expansive soils: 1. Strength should be improved and compressibility should be reduced. 2. Compressibility should be increased. 3. No stabilization should be done. Which of these statements is/are correct? (a) 1, 2 & 3 (b) 2 only (c) 1 only (d) 3 only

Description : Consider the following statements relating to foundations on expansive soils: 1. Strength should be improved and compressibility should be reduced. 2. Compressibility should be increased. 3. No stabilization should be done. Which of these ... ? (a) 1, 2 & 3 (b) 2 only (c) 1 only (d) 3 only

Last Answer : (c) 1 only

The minimum water content at which the soil retains its liquid state and also possesses a small shearing strength against flowing, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Description : The minimum water content at which the soil retains its liquid state and also possesses a small shearing strength against flowing, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Last Answer : (A) Liquid limit

Quick lime is (i) Slow in setting (ii) Rapid in slacking (iii) Good in strength The correct answer is (A) Only (i) (B) Only (ii) (C) Both (i) and (ii) (D) Both (ii) and (

Description : Quick lime is (i) Slow in setting (ii) Rapid in slacking (iii) Good in strength The correct answer is (A) Only (i) (B) Only (ii) (C) Both (i) and (ii) (D) Both (ii) and (

Last Answer : Answer: Option C

As compared to ordinary Portland cement, use of pozzolana cement (A) Reduces workability (B) Increases bleeding (C) Increases shrinkage (D) Increases strength

Description : As compared to ordinary Portland cement, use of pozzolana cement (A) Reduces workability (B) Increases bleeding (C) Increases shrinkage (D) Increases strength

Last Answer : Answer: Option C

Addition of pozzolana to ordinary port land cement, causes (A) Decrease in early strength (B) Reduction in chemical action with sulphates (C) Increase in shrinkage (D) All the above

Description : Addition of pozzolana to ordinary port land cement, causes (A) Decrease in early strength (B) Reduction in chemical action with sulphates (C) Increase in shrinkage (D) All the above

Last Answer : Answer: Option D

Plywood is made from (A) Common timber (B) Bamboo fibre (C) Teak wood only (D) Asbestos sheets

Description : Plywood is made from (A) Common timber (B) Bamboo fibre (C) Teak wood only (D) Asbestos sheets

Last Answer : Answer: Option C

Consider the following zones : 1. Saturation zone 2. Capillary zone 3. Intermediate zone 4. Soilwater zone Which of these does not relate to the zone of aeration in the soil profile ? a) 1 and 2 b) 2 and 3 c) 4 only d) 1 only

Description : Consider the following zones : 1. Saturation zone 2. Capillary zone 3. Intermediate zone 4. Soilwater zone Which of these does not relate to the zone of aeration in the soil profile ? a) 1 and 2 b) 2 and 3 c) 4 only d) 1 only

Last Answer : d) 1 only

Insufficient washing of sand grains in a rapid sand filter causes (A) Air binding (B) Shrinkage of filtering media (C) Mud balls (D) Expansion of filtering media

Description : Insufficient washing of sand grains in a rapid sand filter causes (A) Air binding (B) Shrinkage of filtering media (C) Mud balls (D) Expansion of filtering media

Last Answer : (C) Mud balls

Consider the following statements: Percentage of steel for balanced designed of a singly reinforced rectangular section by limit state method depends on (1) Characteristic strength of concrete (2) Yield strength of concrete (3) Modulus of elasticity of steel (4) Geometry of the section. Which of these statements are correct? (a) 2, 3 and 4 (b) 1, 3 and 4 (c) 1, 2 and 4 (d) 1, 2 and 3

Description : Consider the following statements: Percentage of steel for balanced designed of a singly reinforced rectangular section by limit state method depends on (1) Characteristic strength of concrete (2) Yield strength of concrete (3) Modulus of elasticity ... (b) 1, 3 and 4 (c) 1, 2 and 4 (d) 1, 2 and 3

Last Answer : 1,2,4

Presence of high phosphorous in cast iron increases its (A) Fluidity (B) Melting point (C) Shrinkage (D) Tensile strength

Description : Presence of high phosphorous in cast iron increases its (A) Fluidity (B) Melting point (C) Shrinkage (D) Tensile strength

Last Answer : (A) Fluidity

In “Product Life Cycle” a stage represents rapid growth of product sale known as_____. a.Saturation stage b.Mature stage c.Growth stage d.Introduction stage

Description : In “Product Life Cycle” a stage represents rapid growth of product sale known as_____. a.Saturation stage b.Mature stage c.Growth stage d.Introduction stage

Last Answer : c.Growth stage

Shrinkage of concrete depends upon (i) Humidity of atmosphere (ii) Passage of time (iii) Stress The correct answer is (A) (i) and (ii) (B) (ii) and (iii) (C) Only (iii) (D) All (i), (ii) an

Description : Shrinkage of concrete depends upon (i) Humidity of atmosphere (ii) Passage of time (iii) Stress The correct answer is (A) (i) and (ii) (B) (ii) and (iii) (C) Only (iii) (D) All (i), (ii) an

Last Answer : Answer: Option A

When would the negative differential limits be reached/exceeded? a. Rapid descent when AC descends below cabin altitude b. During ground pressure testing c. Rapid ascent when aircraft climbs d. When changing to manual operation

Description : When would the negative differential limits be reached/exceeded? a. Rapid descent when AC descends below cabin altitude b. During ground pressure testing c. Rapid ascent when aircraft climbs d. When changing to manual operation

Last Answer : a. Rapid descent when AC descends below cabin altitude

When would the negative differential limits be reached/exceeded? a. Rapid descent when AC descends below cabin altitude b. During ground pressure testing c. Rapid ascent when aircraft climbs d. When changing to manual operation

Description : When would the negative differential limits be reached/exceeded? a. Rapid descent when AC descends below cabin altitude b. During ground pressure testing c. Rapid ascent when aircraft climbs d. When changing to manual operation

Last Answer : a. Rapid descent when AC descends below cabin altitude

Fibre glass (A) Retains heat-longer (B) Has a higher strength to weight ratio (C) Is shock proof and fire retardant (D) All the above

Description : Fibre glass (A) Retains heat-longer (B) Has a higher strength to weight ratio (C) Is shock proof and fire retardant (D) All the above

Last Answer : Answer: Option D

Which of the following statements is correct? (a) Sulphate resisting cement is particularly used for canal lining. (b) Low heat cement should not be used for thin concrete structures. (c) Rapid hardening cement should not be used for massive concrete structures (d) All of the above

Description : Which of the following statements is correct? (a) Sulphate resisting cement is particularly used for canal lining. (b) Low heat cement should not be used for thin concrete structures. (c) Rapid hardening cement should not be used for massive concrete structures (d) All of the above

Last Answer : (d) All of the above

The purpose of transverse reinforcement, in a slab is to (a) Distribute the effect to f point load on the slab more evenly and uniformly (b) Distribute the shrinkage and temp cracks more ever (c) Keep the main reinforcement in position (d) All of the above.

Description : The purpose of transverse reinforcement, in a slab is to (a) Distribute the effect to f point load on the slab more evenly and uniformly (b) Distribute the shrinkage and temp cracks more ever (c) Keep the main reinforcement in position (d) All of the above.

Last Answer : (d) All of the above.

In the ___________ process, one starts with a single block of solid material larger than the finalsize of the desired object and material is removed until the desired shape is reached. a.Subtractive process b.Additive process c.Formative process d.All of above

Description : In the ___________ process, one starts with a single block of solid material larger than the finalsize of the desired object and material is removed until the desired shape is reached. a.Subtractive process b.Additive process c.Formative process d.All of above

Last Answer : a.Subtractive process

The function of an expansion joint in rigid pavements is to (A) Relieve warping stresses (B) Relieve shrinkage stresses (C) Resist stresses due to expansion (D) Allow free expansion

Description : The function of an expansion joint in rigid pavements is to (A) Relieve warping stresses (B) Relieve shrinkage stresses (C) Resist stresses due to expansion (D) Allow free expansion

Last Answer : Answer: Option D

The effect of adding calcium chloride in concrete is (i) To increase shrinkage (ii) To decrease shrinkage (iii) To increase setting time (iv) To decrease setting time The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Description : The effect of adding calcium chloride in concrete is (i) To increase shrinkage (ii) To decrease shrinkage (iii) To increase setting time (iv) To decrease setting time The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Last Answer : (B) (i) and (iv)

Pick up the correct statement from the following: (A) Sand stones may be divided into calcareous, siliceous and ferruginous sand stones (B) Concrete using sand stones, cracks due to excessive shrinkage (C) Broken bricks produce a concrete having good fire resisting qualities (D) All the above

Description : Pick up the correct statement from the following: (A) Sand stones may be divided into calcareous, siliceous and ferruginous sand stones (B) Concrete using sand stones, cracks due to excessive shrinkage (C) Broken bricks produce a concrete having good fire resisting qualities (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Construction joints are necessarily planned for their locations (B) Expansion joints are provided to accommodate thermal expansion (C) Construction joints are provided to control shrinkage cracks (D) All the above

Description : Pick up the correct statement from the following: (A) Construction joints are necessarily planned for their locations (B) Expansion joints are provided to accommodate thermal expansion (C) Construction joints are provided to control shrinkage cracks (D) All the above

Last Answer : Answer: Option D

The high strength of rapid hardening cement at early stage, is due to its (A) Finer grinding (B) Burning at high temperature (C) Increased lime cement (D) Higher content of tricalcium

Description : The high strength of rapid hardening cement at early stage, is due to its (A) Finer grinding (B) Burning at high temperature (C) Increased lime cement (D) Higher content of tricalcium

Last Answer : Answer: Option C

The cement whose strength is a little lower than the ordinary cement during the first three months but attains afterwards the same strength, is known as (A) Low-heat Portland cement (B) Rapid hardening Portland cement (C) Portland blast slag cement (D) Portland pozzolana cement

Description : The cement whose strength is a little lower than the ordinary cement during the first three months but attains afterwards the same strength, is known as (A) Low-heat Portland cement (B) Rapid hardening Portland cement (C) Portland blast slag cement (D) Portland pozzolana cement

Last Answer : Answer: Option A

Rapid hardening cement attains early strength due to (A) Larger proportion of lime grounded finer than normal cement (B) Lesser proportion of lime grounded coarser than normal cement (C) Lesser proportion of lime grounded finer than normal cement (D) Excess percentage of gypsum

Description : Rapid hardening cement attains early strength due to (A) Larger proportion of lime grounded finer than normal cement (B) Lesser proportion of lime grounded coarser than normal cement (C) Lesser proportion of lime grounded finer than normal cement (D) Excess percentage of gypsum

Last Answer : Answer: Option A

Early attainment of strength in rapid hardening cement is mainly due to (A) Gypsum (B) Finer grinding (C) Tri-calcium silicate (D) Tri-calcium aluminate

Description : Early attainment of strength in rapid hardening cement is mainly due to (A) Gypsum (B) Finer grinding (C) Tri-calcium silicate (D) Tri-calcium aluminate

Last Answer : Answer: Option B

Which of the following cements is expected to have the highest compressive strength after 3 days (a) Ordinary Portland cement (b) Rapid hardening cement (c) High alumina cement (d) Sulphate resisting cement.

Description : Which of the following cements is expected to have the highest compressive strength after 3 days (a) Ordinary Portland cement (b) Rapid hardening cement (c) High alumina cement (d) Sulphate resisting cement.

Last Answer : (c) High alumina cement

High percentage of tricalcium silicate and low percentage of dicalcium silicate in cement results in. (a) Rapid hardening (b) High early strength (c) High heat of generation (d) All the above

Description : High percentage of tricalcium silicate and low percentage of dicalcium silicate in cement results in. (a) Rapid hardening (b) High early strength (c) High heat of generation (d) All the above

Last Answer : (d) All the above

Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) The acoustical boards prepared by impregnating fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Description : Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) ... fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Last Answer : Answer: Option D

Pick up the correct statements from the following: (A) Cracks appear on the plastered surface in the form of hair cracks (B) In brick work, the efflorescence is removed by applying a solution of zinc sulphate and water (C) Excessive thermal variations in the backing or plaster causes the plaster to fall (D) All the above

Description : Pick up the correct statements from the following: (A) Cracks appear on the plastered surface in the form of hair cracks (B) In brick work, the efflorescence is removed by applying a solution ... Excessive thermal variations in the backing or plaster causes the plaster to fall (D) All the above

Last Answer : Answer: Option D

Consider a 3-puzzle where, like in the usual 8-puzzle game, a tile can only move to an adjacent empty space. Given the initial state which of the following state cannot be reached?

Description : Consider a 3-puzzle where, like in the usual 8-puzzle game, a tile can only move to an adjacent empty space. Given the initial state  which of the following state cannot be reached? 

Last Answer : Answer: C

A control system with excessive noise, is likely to suffer from (a) saturation in amplifying stages (b) loss of gain (c) vibrations (d) oscillations

Description : A control system with excessive noise, is likely to suffer from (a) saturation in amplifying stages (b) loss of gain (c) vibrations (d) oscillations

Last Answer : Ans: A

An operational amplifier has an open loop gain of 200,000. Its output exhibits saturation at 10V.

Description : An operational amplifier has an open loop gain of 200,000. Its output exhibits saturation at 10V. The threshold differential voltage of the amplifier is  A) 25 micro-volt B) 50 micro-volt C) 5 Volts D) 10 volts

Last Answer : An operational amplifier has an open loop gain of 200,000. Its output exhibits saturation at 10V. The threshold differential voltage of the amplifier is 50 micro-volt

Consider the following statements: In the critical path method of construction planning, Free Float can be. 1. Greater than Total Float. 2. Greater than Independent Float 3. Equal to Total Float. 4. Less than Independent Float. Of these statements (A) 1 and 4 are correct (B) 2 and 3 are correct (C) 1 and 4 are correct (D) 1 and 2 are correct

Description : Consider the following statements: In the critical path method of construction planning, Free Float can be. 1. Greater than Total Float. 2. Greater than Independent Float 3. Equal to Total Float. 4. Less than ... (B) 2 and 3 are correct (C) 1 and 4 are correct (D) 1 and 2 are correct

Last Answer : (B) 2 and 3 are correct

The plywood (A) Has good strength along the panel only (B) Can be spilt in the plane of the panel (C) Has greater impact resistance to blows than ordinary wood (D) Cannot be bent more easily than ordinary wood of same thickness

Description : The plywood (A) Has good strength along the panel only (B) Can be spilt in the plane of the panel (C) Has greater impact resistance to blows than ordinary wood (D) Cannot be bent more easily than ordinary wood of same thickness

Last Answer : Answer: Option C

With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct? (a) Increasing atmospheric CO2 concentration up to 0.05% can enhance CO2 fixation rate.(b) C3 plants respond to higher temperature with enhanced photosynthesis while C4 plants have much lower temperature optimum. (c) Tomato is a greenhouse crop which can be grown in CO2-enriched atmosphere for higher yield. (d) Light saturation for CO2 fixation occurs at 10% of full sunlight.

Description : With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct? (a) Increasing atmospheric CO2 concentration up to 0.05% can enhance CO2 fixation rate. ( ... for higher yield. (d) Light saturation for CO2 fixation occurs at 10% of full sunlight.

Last Answer : (b) C3 plants respond to higher temperature with enhanced photosynthesis while C4 plants have much lower temperature optimum

With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct ? (1) Increasing atmospheric CO 2 concentration up to 0.05% can enhance CO 2 fixation rate (2) C 3 plants respond to higher temperatures with enhanced photosynthesis while C 4 plants have much lower temperature optimum (3) Tomato is a greenhouse crop which can be grown in CO 2 - enriched atmosphere for higher yield (4) Light saturation for CO 2 fixation occurs at 10% of full sunlight

Description : With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct ? (1) Increasing atmospheric CO 2 concentration up to 0.05% can enhance CO 2 fixation ... for higher yield (4) Light saturation for CO 2 fixation occurs at 10% of full sunlight

Last Answer : (2) C 3 plants respond to higher temperatures with enhanced photosynthesis while C 4 plants have much lower temperature optimum