Plywood is made from (A) Common timber (B) Bamboo fibre (C) Teak wood only (D) Asbestos sheets

Plywood is made from
(A) Common timber
(B) Bamboo fibre
(C) Teak wood only
(D) Asbestos sheets
by

1 Answer

Answer :

Answer: Option C
by

Related questions

In the manufacture of viscose rayon, the raw material used industrially is (A) Eucalyptus wood (B) Bamboo (C) Bagasse (D) Fine teak wood

Description : In the manufacture of viscose rayon, the raw material used industrially is (A) Eucalyptus wood (B) Bamboo (C) Bagasse (D) Fine teak wood

Last Answer : (D) Fine teak wood

Plywood is obtained by gluing wooden sheets at (A) 100 to 150 N/cm2 (B) 100 to 130°C (C) Both (A) and (B) (D) Neither (A) n

Description : Plywood is obtained by gluing wooden sheets at (A) 100 to 150 N/cm2 (B) 100 to 130°C (C) Both (A) and (B) (D) Neither (A) nor (b)

Last Answer : Answer: Option C

The most valuable timber may be obtained from (A) Chir (B) Shishum (C) Sal (D) Teak

Description : The most valuable timber may be obtained from (A) Chir (B) Shishum (C) Sal (D) Teak

Last Answer : Answer: Option D

The timber having maximum resistance against white ants, is obtained from (A) Chir (B) Shishum (C) Sal (D) Teak

Description : The timber having maximum resistance against white ants, is obtained from (A) Chir (B) Shishum (C) Sal (D) Teak

Last Answer : Answer: Option B

Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is (A) 0° (B) 30° (C) 45° (D) 90°

Description : Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is (A) 0° (B) 30° (C) 45° (D) 90°

Last Answer : Answer: Option D

The plywood (A) Has good strength along the panel only (B) Can be spilt in the plane of the panel (C) Has greater impact resistance to blows than ordinary wood (D) Cannot be bent more easily than ordinary wood of same thickness

Description : The plywood (A) Has good strength along the panel only (B) Can be spilt in the plane of the panel (C) Has greater impact resistance to blows than ordinary wood (D) Cannot be bent more easily than ordinary wood of same thickness

Last Answer : Answer: Option C

Seasoning of timber is essential to remove (A) Knots from timber (B) Sap from timber (C) Twisted fibre from timber (D) Roughness of timber

Description : Seasoning of timber is essential to remove (A) Knots from timber (B) Sap from timber (C) Twisted fibre from timber (D) Roughness of timber

Last Answer : Answer: Option B

Sapwood consists of (A) Innermost annular rings around the pith (B) Portion of timber between heartwood and cambium layer (C) Thin layers below the bark (D) Thin fibre which extends from the pith outwards and holds the annular rings together

Description : Sapwood consists of (A) Innermost annular rings around the pith (B) Portion of timber between heartwood and cambium layer (C) Thin layers below the bark (D) Thin fibre which extends from the pith outwards and holds the annular rings together

Last Answer : Answer: Option B

Generally wooden moulds are made from (A) Ply wood (B) Shishum wood (C) Deodar wood (D) Teak wood

Description : Generally wooden moulds are made from (A) Ply wood (B) Shishum wood (C) Deodar wood (D) Teak wood

Last Answer : Answer: Option B

What wood is plywood mostly made from

Description : What wood is plywood mostly made from

Last Answer : Birch

Consider the following statements: 1. Dry rot in sap wood is caused by fungal attack 2. Brown rot in coniferous woods is a result of fungal attack 3. Alternate wetting and drying of unseasoned timber causes ‘powdery’ form of decay in wood. Which of these statements are correct? (a) 1, 2 and 3 b)1 and 2 only c)2 and 3 only d)1 and 3 only

Description : Consider the following statements: 1. Dry rot in sap wood is caused by fungal attack 2. Brown rot in coniferous woods is a result of fungal attack 3. Alternate wetting and drying of unseasoned timber causes powdery' form of decay in ... ? (a) 1, 2 and 3 b)1 and 2 only c)2 and 3 only d)1 and 3 only

Last Answer : (a) 1, 2 and 3

Teak wood is suitable for (A) Sports articles (B) Furnitures (C) Railway sleepers (D) All the above

Description : Teak wood is suitable for (A) Sports articles (B) Furnitures (C) Railway sleepers (D) All the above

Last Answer : Answer: Option B

In which of the following pairs both trees yield soft wood? (A) Deodar and Shishum (B) Chir and sal (C) Sal and teak (D) Chir and deodar

Description : In which of the following pairs both trees yield soft wood? (A) Deodar and Shishum (B) Chir and sal (C) Sal and teak (D) Chir and deodar

Last Answer : Answer: Option D

Veneering means (A) Carving out designs on timber planks (B) Chemically treating timber planks (C) Thick layer of superior wood glued to inferior wood (D) Thin layer of superior wood glued to inferior wood

Description : Veneering means (A) Carving out designs on timber planks (B) Chemically treating timber planks (C) Thick layer of superior wood glued to inferior wood (D) Thin layer of superior wood glued to inferior wood

Last Answer : Answer: Option C

Inner part of a timber log surrounding the pitch, is called (A) Sapwood (B) Cambium layer (C) Heart wood (D) None to these

Description : Inner part of a timber log surrounding the pitch, is called (A) Sapwood (B) Cambium layer (C) Heart wood (D) None to these

Last Answer : Answer: Option C

What kind of wood and plywood used in home decor?

Description : What kind of wood and plywood used in home decor?

Last Answer : Well, thanks to the growth of the wood and plywood industry, that the answer to this question What kind of wood and plywood used in home decor?' cannot have one single answer. Amulya Mica being ... , the selection depends on you will be using the plywood in future for home décor purpose.In Plywood

Consider the following statements Fibre saturation point in wood is reached when 1. Free water is removed 2. Cell water is removed 3. Shrinkage of wood is rapid 4. Strength gain is rapid Which of these statements are correct? (a) 1, 2 and 3 (b) 1 and 2 only (c) 2 and 4 only (d) 1, 3 and 4

Description : Consider the following statements Fibre saturation point in wood is reached when 1. Free water is removed 2. Cell water is removed 3. Shrinkage of wood is rapid 4. Strength gain is rapid Which of these statements are correct? (a) 1, 2 and 3 (b) 1 and 2 only (c) 2 and 4 only (d) 1, 3 and 4

Last Answer : (d) 1, 3 and 4

I'm looking to buy Modal or Bamboo fiber bed sheets at discount?

Description : I'm looking to buy Modal or Bamboo fiber bed sheets at discount?

Last Answer : I bought my organic cotton sheets on sale at Marshall’s. They probably don’t have bamboo all the time, but you might be able to find it if you get lucky. Overstock.com carries stuff like that, but it may or may not actually be at a discount, you gotta do your homework.

Part of the insulation of practically all electrical machinery is in the form of organic compounds which contain some amount of ______________. A. asbestos B. water C. fibre D. plastic

Description : Part of the insulation of practically all electrical machinery is in the form of organic compounds which contain some amount of ______________. A. asbestos B. water C. fibre D. plastic

Last Answer : Answer: B

The chemical used in breather is A. Asbestos fibre B. Silica sand C. Sodium chloride D. Silica gel

Description : The chemical used in breather is A. Asbestos fibre B. Silica sand C. Sodium chloride D. Silica gel

Last Answer : Silica gel

Cellulose content in bamboo fibre is about __________ percent. (A) 10 (B) 20 (C) 50 (D) 85

Description : Cellulose content in bamboo fibre is about __________ percent. (A) 10 (B) 20 (C) 50 (D) 85

Last Answer : (C) 50

Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms of permanganate number (C) Bagasse fibre contains both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Description : Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms ... both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Last Answer : (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Cellulose percentage in bamboo fibre is about (A) 10 (B) 20 (C) 50 (D) 85

Description : Cellulose percentage in bamboo fibre is about (A) 10 (B) 20 (C) 50 (D) 85

Last Answer : (C) 50

Is it safe to leave teak wood patio furniture outside year round?

Description : Is it safe to leave teak wood patio furniture outside year round?

Last Answer : Yes you can leave it outside. It should be washed occasionally though.

Where can I find teak wood dinning sets?

Description : Where can I find teak wood dinning sets?

Last Answer : Patio Furniture USA is a good place to buy garden furniture. They have a large range of styles and materials, including teak, at good prices. Visit www.patiofurnitureusa.com.

Is teak wood good for patio furniture?

Description : Is teak wood good for patio furniture?

Last Answer : Rain will not affect the strength or durability of the teak wood in any way however if you use unfinished teak it will turn silver gray due to the sun and may develop water stains from the rain during the first few months. These can be cleaned off using soap though so it is not much of a problem

Best wood for wooden sleepers is A. Sal B. Teak C. Deodar D. Chir

Description : Best wood for wooden sleepers is A. Sal B. Teak C. Deodar D. Chir

Last Answer : B [Teak]

The horizontal timber piece provided at the apex of a roof truss which supports the common rafter is called (A) Ridge board (B) Hip rafter (C) Eaves board (D) Valley rafte

Description : The horizontal timber piece provided at the apex of a roof truss which supports the common rafter is called (A) Ridge board (B) Hip rafter (C) Eaves board (D) Valley rafte

Last Answer : Answer: Option A

For the manufacture of plywood, veneers are placed so that grains of adjacent veneers (A) Run at right angles (B) Parallel (C) Inclined at 45° (D) Inclined at 60°

Description : For the manufacture of plywood, veneers are placed so that grains of adjacent veneers (A) Run at right angles (B) Parallel (C) Inclined at 45° (D) Inclined at 60°

Last Answer : Answer: Option A

Plywood is normally available (A) 1 mm thick (B) 2 mm thick (C) 2 to 3 mm thick (D) 3 mm to 4 mm thick

Description : Plywood is normally available (A) 1 mm thick (B) 2 mm thick (C) 2 to 3 mm thick (D) 3 mm to 4 mm thick

Last Answer : Answer: Option D

Plywood has the advantage of (A) Greater tensile strength in longer direction (B) Greater tensile strength in shorter direction (C) Same tensile strength in all directions (D) None of the above

Description : Plywood has the advantage of (A) Greater tensile strength in longer direction (B) Greater tensile strength in shorter direction (C) Same tensile strength in all directions (D) None of the above

Last Answer : Answer: Option C

The smoothened surface of the front face of the guay walls, is known as fending which is made of (A) Granite stone (B) Timber (C) Steel (D) All the above

Description : The smoothened surface of the front face of the guay walls, is known as fending which is made of (A) Granite stone (B) Timber (C) Steel (D) All the above

Last Answer : (D) All the above

Size reduction of fibrous materials like wood, asbestos, mica etc. is done by a disintegrator exemplified by the(A) Blake jaw crusher(B) Cage mill(C) Stamp mill(D) Bradford's breaker

Description : Size reduction of fibrous materials like wood, asbestos, mica etc. is done by a disintegrator exemplified by the (A) Blake jaw crusher (B) Cage mill (C) Stamp mill (D) Bradford's breaker

Last Answer : (B) Cage mill

Which of the following is not used as filter aid? (A) Asbestos (B) Diatomaceous earth (C) Purified wood cellulose (D) Rice husk

Description : Which of the following is not used as filter aid? (A) Asbestos (B) Diatomaceous earth (C) Purified wood cellulose (D) Rice husk

Last Answer : (D) Rice husk

I am trying to construct a giant book made with plywood for the corner of a children's room. How should I go about constructing the binding/support for the book to stay standing, and also be able to open the book 90 degrees?

Description : I am trying to construct a giant book made with plywood for the corner of a children's room. How should I go about constructing the binding/support for the book to stay standing, and also be able to open the book 90 degrees?

Last Answer : Maybe an internal metal frame, and the moving parts rested on wheels.

Bamboo or wood laminate?

Description : Bamboo or wood laminate?

Last Answer : The bamboo is a very very hard wood. It is very light, and very attractive.

Bamboo or wood blinds?

Description : Bamboo or wood blinds?

Last Answer : Nothing beats the beauty and warmth of natural hardwood blinds. Many varieties are lightweight, easy to clean and resist warping.

Production of one ton of dry paper pulp requires about __________ tons of bamboo or wood. (A) 1 (B) 2.5 (C) 5 (D) 10

Description : Production of one ton of dry paper pulp requires about __________ tons of bamboo or wood. (A) 1 (B) 2.5 (C) 5 (D) 10

Last Answer : (B) 2.5

Which one of the following is resistant to enzyme action? (a) Pollen exine (b) Leaf cuticle (c) Cork (d) Wood fibre

Description : Which one of the following is resistant to enzyme action? (a) Pollen exine (b) Leaf cuticle (c) Cork (d) Wood fibre

Last Answer : (a) Pollen exine

The common tree species in Nilgiri hills is – (1) Sal (2) Pine (3) Eucalyptus (4) Teak

Description : The common tree species in Nilgiri hills is – (1) Sal (2) Pine (3) Eucalyptus (4) Teak

Last Answer : (3) Eucalyptus Explanation: Nilgiri mountains are a range of mountains with at least 24 peaks above 2,000 metres (6,600 ft), in the westernmost part of Tamil Nadu state at the ... larger Western Ghats mountain chain making up the southwestern edge of the Deccan Plateau. Eucalyptus is common.

The advantage of a concrete pile over a timber pile, is (A) No decay due to termites (B) No restriction on length (C) Higher bearing capacity (D) All the above

Description : The advantage of a concrete pile over a timber pile, is (A) No decay due to termites (B) No restriction on length (C) Higher bearing capacity (D) All the above

Last Answer : Answer: Option D

Dry rot (A) Cracks the timber (B) Reduces the strength of timber (C) Reduces the timber to powder (D) Spoils the appearance of timber

Description : Dry rot (A) Cracks the timber (B) Reduces the strength of timber (C) Reduces the timber to powder (D) Spoils the appearance of timber

Last Answer : Answer: Option C

The presence of original rounded surface on the manufactured piece of timber, is called (A) Wane (B) Torn grain (C) Diagonal grain (D) Chipmark

Description : The presence of original rounded surface on the manufactured piece of timber, is called (A) Wane (B) Torn grain (C) Diagonal grain (D) Chipmark

Last Answer : Answer: Option A

Apiece of sawn timber whose cross-sectional dimensions exceed 5 cm, in one direction and 20 cm in the other direction, is called a (A) Cant (B) Deal (C) Baulk (D) Strip

Description : Apiece of sawn timber whose cross-sectional dimensions exceed 5 cm, in one direction and 20 cm in the other direction, is called a (A) Cant (B) Deal (C) Baulk (D) Strip

Last Answer : Answer: Option C

A well seasoned timber may contain moisture up to (A) 4 to 6 % (B) 6 to 8 % (C) 8 to 10 % (D) 10 to 12 %

Description : A well seasoned timber may contain moisture up to (A) 4 to 6 % (B) 6 to 8 % (C) 8 to 10 % (D) 10 to 12 %

Last Answer : Answer: Option D

Knots in timber are (A) Defects caused by crushing fibres (B) Splits radiating from the centre (C) Speckled strains (D) Signs of branches cut off

Description : Knots in timber are (A) Defects caused by crushing fibres (B) Splits radiating from the centre (C) Speckled strains (D) Signs of branches cut off

Last Answer : Answer: Option D

A piece of timber whose thickness and width are respectively 5 cm and 10 cm is called (A) Slate (B) Plank (C) Board (D) Strip

Description : A piece of timber whose thickness and width are respectively 5 cm and 10 cm is called (A) Slate (B) Plank (C) Board (D) Strip

Last Answer : Answer: Option D

The most commonly used base for timber painting, is (A) Red lead (B) Zinc white (C) White lead (D) Titanium white

Description : The most commonly used base for timber painting, is (A) Red lead (B) Zinc white (C) White lead (D) Titanium white

Last Answer : Answer: Option C

The moisture content in a well seasoned timber is (A) 4 % to 6 % (B) 10 % to 12 % (C) 15 % to 20 % (D) 100 %

Description : The moisture content in a well seasoned timber is (A) 4 % to 6 % (B) 10 % to 12 % (C) 15 % to 20 % (D) 100 %

Last Answer : Answer: Option B

Seasoning of timber is done for (A) Increasing moisture content (B) Decreasing moisture content (C) Increasing strength of timber (D) None to these

Description : Seasoning of timber is done for (A) Increasing moisture content (B) Decreasing moisture content (C) Increasing strength of timber (D) None to these

Last Answer : Answer: Option B