The function of an expansion joint in rigid pavements is to (A) Relieve warping stresses (B) Relieve shrinkage stresses (C) Resist stresses due to expansion (D) Allow free expansion

The function of an expansion joint in rigid pavements is to
(A) Relieve warping stresses
(B) Relieve shrinkage stresses
(C) Resist stresses due to expansion
(D) Allow free expansion
by

1 Answer

Answer :

Answer: Option D
by

Related questions

The maximum thickness of expansion joint in rigid pavements is (A) 0 (B) 25 mm (C) 50 mm (D) 100 mm

Description : The maximum thickness of expansion joint in rigid pavements is (A) 0 (B) 25 mm (C) 50 mm (D) 100 mm

Last Answer : Answer: Option B

Tie bars in cement concrete pavements are at (A) Expansion joints (B) Contraction joints (C) Warping joints (D) Longitudinal joints

Description : Tie bars in cement concrete pavements are at (A) Expansion joints (B) Contraction joints (C) Warping joints (D) Longitudinal joints

Last Answer : Answer: Option D

To prevent compressive stresses in a rigid concrete pavement, the joint provided, is (A) Expansion joint (B) Contraction joint (C) Hinged joint (D) All the above

Description : To prevent compressive stresses in a rigid concrete pavement, the joint provided, is (A) Expansion joint (B) Contraction joint (C) Hinged joint (D) All the above

Last Answer : Answer: Option D

The transverse reinforcements provided at right angles to the main reinforcement (A) Distribute the load (B) Resist the temperature stresses (C) Resist the shrinkage stress (D) All the above

Description : The transverse reinforcements provided at right angles to the main reinforcement (A) Distribute the load (B) Resist the temperature stresses (C) Resist the shrinkage stress (D) All the above

Last Answer : Answer: Option D

The transverse reinforcements provided at right angles to the main reinforcement. (a) To distribute the load. (b) To resist the temp stresses (c) To resist the shrinkage stresses (d) All the above

Description : The transverse reinforcements provided at right angles to the main reinforcement. (a) To distribute the load. (b) To resist the temp stresses (c) To resist the shrinkage stresses (d) All the above

Last Answer : (d) All the above

The presence of sand in brick earth prevents: (A) Cracking of bricks (B) Shrinkage of bricks (C) Warping of bricks (D) None of these

Description : The presence of sand in brick earth prevents: (A) Cracking of bricks (B) Shrinkage of bricks (C) Warping of bricks (D) None of these

Last Answer : Answer: Option C

Which of the following statements are true about eccentrically loaded circular base? a) All bolts are symmetrically spaced with equal angle on either side of vertical b) Bolts are not preloaded c) Bearing is rigid d) Dowel pins are used to relieve stresses

Description : Which of the following statements are true about eccentrically loaded circular base? a) All bolts are symmetrically spaced with equal angle on either side of vertical b) Bolts are not preloaded c) Bearing is rigid d) Dowel pins are used to relieve stresses

Last Answer : a) All bolts are symmetrically spaced with equal angle on either side of vertical

The critical combination of stresses for corner region in cement concrete roads is (A) Load stress + warping stress frictional stress (B) Load stress + warping stress + frictional stress (C) Load stress + warping stress (D) Load stress + frictional stress

Description : The critical combination of stresses for corner region in cement concrete roads is (A) Load stress + warping stress frictional stress (B) Load stress + warping stress + frictional stress (C) Load stress + warping stress (D) Load stress + frictional stress

Last Answer : Answer: Option C

The maximum spacing of contraction joints in rigid pavements is (A) 2.5 m (B) 3.5 m (C) 4.5 m (D) 5.5 m

Description : The maximum spacing of contraction joints in rigid pavements is (A) 2.5 m (B) 3.5 m (C) 4.5 m (D) 5.5 m

Last Answer : Answer: Option C

In a heat exchanger, floating head is provided to (A) Facilitate cleaning of the exchanger (B) Increase the heat transfer area (C) Relieve stresses caused by thermal expansion (D) Increase log mean temperature gradient

Description : In a heat exchanger, floating head is provided to (A) Facilitate cleaning of the exchanger (B) Increase the heat transfer area (C) Relieve stresses caused by thermal expansion (D) Increase log mean temperature gradient

Last Answer : (C) Relieve stresses caused by thermal expansion

Due to shrinkage stresses, a simply supported beam having reinforcement only at bottom tends to (A) Deflect downward (B) Deflect upward (C) Deflect downward or upward (D) None of the above

Description : Due to shrinkage stresses, a simply supported beam having reinforcement only at bottom tends to (A) Deflect downward (B) Deflect upward (C) Deflect downward or upward (D) None of the above

Last Answer : Answer: Option A

Minimum shear reinforcement is necessary to [ A ] Prevent brittle shear failure [ B ] Prevent failure due to shrinkage and thermal stresses [ C ] Hold the reinforcements in place while pouring concrete [ D ] All the above.

Description : Minimum shear reinforcement is necessary to [ A ] Prevent brittle shear failure [ B ] Prevent failure due to shrinkage and thermal stresses [ C ] Hold the reinforcements in place while pouring concrete [ D ] All the above.

Last Answer : [ D ] All the above.

In railway tracks, a small gap is left between the rails _____. A. To permit the shrinkage of metal B. To save the cost of metal C. To allow for the expansion during heat D. None of the above

Description : In railway tracks, a small gap is left between the rails _____. A. To permit the shrinkage of metal B. To save the cost of metal C. To allow for the expansion during heat D. None of the above

Last Answer : ANSWER: C

In railway tracks, a small gap is left between the rails _____. A. To permit the shrinkage of metal B. To save the cost of metal C. To allow for the expansion during heat D. None of the above

Description : In railway tracks, a small gap is left between the rails _____. A. To permit the shrinkage of metal B. To save the cost of metal C. To allow for the expansion during heat D. None of the above

Last Answer : ANSWER: C

Plastic bitumen is generally used for (A) Road pavements (B) Expansion joints (C) Crack fillings (D) None to these

Description : Plastic bitumen is generally used for (A) Road pavements (B) Expansion joints (C) Crack fillings (D) None to these

Last Answer : Answer: Option C

In symmetrically reinforced sections, shrinkage stresses in concrete and steel are respectively (A) Compressive and tensile (B) Tensile and compressive (C) Both compressive (D) Both tensile

Description : In symmetrically reinforced sections, shrinkage stresses in concrete and steel are respectively (A) Compressive and tensile (B) Tensile and compressive (C) Both compressive (D) Both tensile

Last Answer : Answer: Option D

The purpose of reinforcement in pre-stressed concrete is (A) To provide adequate bond stress (B) To resist tensile stresses (C) To impart initial compressive stress in concrete (D) All of the above

Description : The purpose of reinforcement in pre-stressed concrete is (A) To provide adequate bond stress (B) To resist tensile stresses (C) To impart initial compressive stress in concrete (D) All of the above

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) Construction joints are necessarily planned for their locations (B) Expansion joints are provided to accommodate thermal expansion (C) Construction joints are provided to control shrinkage cracks (D) All the above

Description : Pick up the correct statement from the following: (A) Construction joints are necessarily planned for their locations (B) Expansion joints are provided to accommodate thermal expansion (C) Construction joints are provided to control shrinkage cracks (D) All the above

Last Answer : Answer: Option D

Independent displacement components at each joint of a rigid-jointed plane frame are (A) Three linear movements (B) Two linear movements and one rotation (C) One linear movement and two rotations (D) Three rotations

Description : Independent displacement components at each joint of a rigid-jointed plane frame are (A) Three linear movements (B) Two linear movements and one rotation (C) One linear movement and two rotations (D) Three rotations

Last Answer : (B) Two linear movements and one rotation

The number of independent displacement components at each joint of a rigid-jointed space frame is (A) 1 (B) 2 (C) 3 (D) 6

Description : The number of independent displacement components at each joint of a rigid-jointed space frame is (A) 1 (B) 2 (C) 3 (D) 6

Last Answer : (D) 6

In cement concrete pavements, tensile stress is due to: (A) Bending or deflection under wheel loads (B) Difference in temperature of the top and bottom of pavement (C) Contraction of slab during falling temperature (D) All the above

Description : In cement concrete pavements, tensile stress is due to: (A) Bending or deflection under wheel loads (B) Difference in temperature of the top and bottom of pavement (C) Contraction of slab during falling temperature (D) All the above

Last Answer : Answer: Option D

Excess of silica in brick earth results in (A) Cracking and warping of bricks (B) Loss of cohesion (C) Enhancing the impermeability of bricks (D) None of the above

Description : Excess of silica in brick earth results in (A) Cracking and warping of bricks (B) Loss of cohesion (C) Enhancing the impermeability of bricks (D) None of the above

Last Answer : Answer: Option B

In a concrete pavement, during summer, at and soon after mid-day, the combined stress at the interior of the slab is equal to : (a) Wheel load stress + Temperature warping stress + Sub grade resistance stress (b) Wheel load stress + Temperature warping stress – Sub grade resistant stress (c) Wheel load stress – Temperature warping stress + Sub grade resistant stress (d) Wheel load stress – Temperature warping stress − Sub grade resistant stress

Description : In a concrete pavement, during summer, at and soon after mid-day, the combined stress at the interior of the slab is equal to : (a) Wheel load stress + Temperature warping stress + Sub ... + Sub grade resistant stress (d) Wheel load stress - Temperature warping stress − Sub grade resistant stress

Last Answer : (b) Wheel load stress + Temperature warping stress – Sub grade resistant stress

Which one of the following east flowing rivers of India has rift valley due to down warping (a) Damodar (b) Mahanadi (c) Sone (d) Yamuna

Description : Which one of the following east flowing rivers of India has rift valley due to down warping (a) Damodar (b) Mahanadi (c) Sone (d) Yamuna

Last Answer : Ans: (a)

Which one of the following east flowing rivers of India forms rift valley due to down warping? [IAS 1998] (a) Damodar (b) Mahanadi (c) Son (d) Yamuna

Description : Which one of the following east flowing rivers of India forms rift valley due to down warping? [IAS 1998] (a) Damodar (b) Mahanadi (c) Son (d) Yamuna

Last Answer : Ans: (a)

Which east flowing river of India forms rift valley due to down warping?

Description : Which east flowing river of India forms rift valley due to down warping?

Last Answer : Damodar

Insufficient washing of sand grains in a rapid sand filter causes (A) Air binding (B) Shrinkage of filtering media (C) Mud balls (D) Expansion of filtering media

Description : Insufficient washing of sand grains in a rapid sand filter causes (A) Air binding (B) Shrinkage of filtering media (C) Mud balls (D) Expansion of filtering media

Last Answer : (C) Mud balls

After pre-stressing process is completed, a loss of stress is due to (A) Shrinkage of concrete (B) Elastic shortening of concrete (C) Creep of concrete (D) All the above

Description : After pre-stressing process is completed, a loss of stress is due to (A) Shrinkage of concrete (B) Elastic shortening of concrete (C) Creep of concrete (D) All the above

Last Answer : Answer: Option D

A pre-stressed concrete member is preferred because (A) Its dimensions are not decided from the diagonal tensile stress (B) Large size of long beams carrying large shear force need not be adopted (C) Removal of cracks in the members due to shrinkage (D) All the above

Description : A pre-stressed concrete member is preferred because (A) Its dimensions are not decided from the diagonal tensile stress (B) Large size of long beams carrying large shear force need not be adopted (C) Removal of cracks in the members due to shrinkage (D) All the above

Last Answer : Answer: Option D

Which of the following losses of pre-stress occurs only in pre-tensioning and not in posttensioning? (A) Elastic shortening of concrete (B) Shrinkage of concrete (C) Creep of concrete (D) Loss due to frictio

Description : Which of the following losses of pre-stress occurs only in pre-tensioning and not in posttensioning? (A) Elastic shortening of concrete (B) Shrinkage of concrete (C) Creep of concrete (D) Loss due to friction

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) Sand stones may be divided into calcareous, siliceous and ferruginous sand stones (B) Concrete using sand stones, cracks due to excessive shrinkage (C) Broken bricks produce a concrete having good fire resisting qualities (D) All the above

Description : Pick up the correct statement from the following: (A) Sand stones may be divided into calcareous, siliceous and ferruginous sand stones (B) Concrete using sand stones, cracks due to excessive shrinkage (C) Broken bricks produce a concrete having good fire resisting qualities (D) All the above

Last Answer : Answer: Option D

Which one of the following statements is not correct with respect to PSC beams? (a) Loss due to shrinkage is proportional to water-cement ratio used in concrete (b) Loss due to creep is proportional to the age of the member at the time of loading. (c) Loss due to elastic deformation is directly proportionally to the modulus of elasticity of concrete (d) Loss due to friction occurs in post tensioned concrete members

Description : Which one of the following statements is not correct with respect to PSC beams? (a) Loss due to shrinkage is proportional to water-cement ratio used in concrete (b) Loss due to creep is ... to the modulus of elasticity of concrete (d) Loss due to friction occurs in post tensioned concrete members

Last Answer : (c) Loss due to elastic deformation is directly proportionally to the modulus of elasticity of concrete

The main function of alumina in brick earth is (A) To impart plasticity (B) To make the brick durable (C) To prevent shrinkage (D) To make the brick impermeable

Description : The main function of alumina in brick earth is (A) To impart plasticity (B) To make the brick durable (C) To prevent shrinkage (D) To make the brick impermeable

Last Answer : Answer: Option A

What are the functions of different components of a typical expansion joint?

Description : What are the functions of different components of a typical expansion joint?

Last Answer : In a typical expansion joint, it normally contains the following components: joint sealant, joint filler, dowel bar, PVC dowel sleeve, bond breaker tape and cradle bent. Joint sealant: it seals the ... the joint . Cradle bar: It helps to uphold the dowel bar in position during construction.

In pumping stations, the type of joint generally used, is (A) Socket and spigot joint (B) Flanged joint (C) Expansion joint (D) Dresser coupling joint

Description : In pumping stations, the type of joint generally used, is (A) Socket and spigot joint (B) Flanged joint (C) Expansion joint (D) Dresser coupling joint

Last Answer : (B) Flanged joint

Steel pipe are (A) Suitable for withstanding high internal pressure (B) Connected by riveted or welded joints (C) Generally laid underground and no expansion joint is required (D) Likely to last 100 years under ordinary conditions

Description : Steel pipe are  (A) Suitable for withstanding high internal pressure  (B) Connected by riveted or welded joints  (C) Generally laid underground and no expansion joint is required  (D) Likely to last 100 years under ordinary conditions 

Last Answer : (D) Likely to last 100 years under ordinary conditions 

The surface where two successive placements of concrete meet, is known as (A) Contraction joint (B) Expansion joint (C) Construction joint (D) Both (a) and (b)

Description : The surface where two successive placements of concrete meet, is known as (A) Contraction joint (B) Expansion joint (C) Construction joint (D) Both (a) and (b)

Last Answer : Answer: Option C

The nominal thickness of an expansion joint in brick walls, is kept more than (A) 5 mm (B) 10 mm (C) 15 mm (D) 20 mm

Description : The nominal thickness of an expansion joint in brick walls, is kept more than (A) 5 mm (B) 10 mm (C) 15 mm (D) 20 mm

Last Answer : Answer: Option D

California Bearing Ratio method of designing flexible pavements is more accurate as it involves (A) Characteristics of soils (B) Traffic intensities (C) Character of the road making materials (D) None of these

Description : California Bearing Ratio method of designing flexible pavements is more accurate as it involves (A) Characteristics of soils (B) Traffic intensities (C) Character of the road making materials (D) None of these

Last Answer : Answer: Option C

The width of road pavements, depends upon (A) Width of traffic lane (B) Number of traffic (C) Width of median strip (D) All the above

Description : The width of road pavements, depends upon (A) Width of traffic lane (B) Number of traffic (C) Width of median strip (D) All the above

Last Answer : Answer: Option D

In case of cement concrete pavements, pick up the incorrect statement (A) Tractive resistance is low (B) Initial cost of construction is high (C) Initial cost of construction is low (D) Visibility during nights is high

Description : In case of cement concrete pavements, pick up the incorrect statement (A) Tractive resistance is low (B) Initial cost of construction is high (C) Initial cost of construction is low (D) Visibility during nights is high

Last Answer : Answer: Option C

The camber on pavements, is provided by (A) Straight line method (B) Parabolic method (C) Straight line and parabolic at crown (D) Elliptical method

Description : The camber on pavements, is provided by (A) Straight line method (B) Parabolic method (C) Straight line and parabolic at crown (D) Elliptical method

Last Answer : Answer: Option C

The formula for calculating the depth of concrete pavements suggested by Gold beck, is (A) d = 3W/ max (B) d W/ max) (C) d W/ max) (D) d W/ max)

Description : The formula for calculating the depth of concrete pavements suggested by Gold beck, is (A) d = 3W/ max (B) d W/ max) (C) d W/ max) (D) d W/ max)

Last Answer : Answer: Option B

Camber in pavements is provided by (A) Straight line method (B) Parabola method (C) Straight at the edges and parabolic at the crown (D) All the above

Description : Camber in pavements is provided by (A) Straight line method (B) Parabola method (C) Straight at the edges and parabolic at the crown (D) All the above

Last Answer : Answer: Option D

Reinforcement in cement concrete slab of road pavements, is placed (A) Longitudinally (B) Transversely (C) Longitudinally and transversely (D) In the form of welded wire mesh

Description : Reinforcement in cement concrete slab of road pavements, is placed (A) Longitudinally (B) Transversely (C) Longitudinally and transversely (D) In the form of welded wire mesh

Last Answer : Answer: Option D

Maximum daily traffic capacity of bituminous pavements is (A) 500 tonnes per day (B) 1000 tonnes per day (C) 1500 tonnes per day (D) 2000 tonnes per day

Description : Maximum daily traffic capacity of bituminous pavements is (A) 500 tonnes per day (B) 1000 tonnes per day (C) 1500 tonnes per day (D) 2000 tonnes per day

Last Answer : Answer: Option C

Design of flexible pavements is based on (A) Mathematical analysis (B) Empirical formulae (C) A compromise of pure theory and pure empirical formula (D) None of these

Description : Design of flexible pavements is based on (A) Mathematical analysis (B) Empirical formulae (C) A compromise of pure theory and pure empirical formula (D) None of these

Last Answer : Answer: Option C

Excessive camber on pavements may cause (A) Deterioration of central portion (B) Slip of the speedy vehicles towards the edges (C) Erosion of the berms (D) All the above

Description : Excessive camber on pavements may cause (A) Deterioration of central portion (B) Slip of the speedy vehicles towards the edges (C) Erosion of the berms (D) All the above

Last Answer : Answer: Option D

Select the correct statement. (A) Quantity of binder required for tack coat is less than that required for prime coat (B) Prime coat treatment is given for plugging the voids in water bound macadam during bituminous road construction (C) Seal coat is the final coat over certain previous bituminous pavements (D) A bitumen primer is a high viscosity cutback

Description : Select the correct statement. (A) Quantity of binder required for tack coat is less than that required for prime coat (B) Prime coat treatment is given for plugging the voids in water ... the final coat over certain previous bituminous pavements (D) A bitumen primer is a high viscosity cutback

Last Answer : Answer: Option D

Which of the following is considered to be the highest quality construction in the group of black top pavements? (A) Mastic asphalt (B) Sheet asphalt (C) Bituminous carpet (D) Bituminous concrete

Description : Which of the following is considered to be the highest quality construction in the group of black top pavements? (A) Mastic asphalt (B) Sheet asphalt (C) Bituminous carpet (D) Bituminous concrete

Last Answer : Answer: Option D