The plywood (A) Has good strength along the panel only (B) Can be spilt in the plane of the panel (C) Has greater impact resistance to blows than ordinary wood (D) Cannot be bent more easily than ordinary wood of same thickness

The plywood
(A) Has good strength along the panel only
(B) Can be spilt in the plane of the panel
(C) Has greater impact resistance to blows than ordinary wood
(D) Cannot be bent more easily than ordinary wood of same thickness
by

1 Answer

Answer :

Answer: Option C
by

Related questions

Plywood has the advantage of (A) Greater tensile strength in longer direction (B) Greater tensile strength in shorter direction (C) Same tensile strength in all directions (D) None of the above

Description : Plywood has the advantage of (A) Greater tensile strength in longer direction (B) Greater tensile strength in shorter direction (C) Same tensile strength in all directions (D) None of the above

Last Answer : Answer: Option C

Plywood is made from (A) Common timber (B) Bamboo fibre (C) Teak wood only (D) Asbestos sheets

Description : Plywood is made from (A) Common timber (B) Bamboo fibre (C) Teak wood only (D) Asbestos sheets

Last Answer : Answer: Option C

Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is (A) 0° (B) 30° (C) 45° (D) 90°

Description : Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is (A) 0° (B) 30° (C) 45° (D) 90°

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The distinct plane of division along which a stone can easily be split, is called natural bed of stone (B) The natural bed of sedimentary rocks is along the planes of stratification (C) The natural bed of igneous rocks is not defined (D) All the above

Description : Pick up the correct statement from the following: (A) The distinct plane of division along which a stone can easily be split, is called natural bed of stone (B) The natural bed of sedimentary ... planes of stratification (C) The natural bed of igneous rocks is not defined (D) All the above

Last Answer : Answer: Option D

Granite is not suitable for ordinary building purpose because (A) It cannot be polished (B) It is not a fire proof material (C) It is costly (D) It has less crushing strength

Description : Granite is not suitable for ordinary building purpose because (A) It cannot be polished (B) It is not a fire proof material (C) It is costly (D) It has less crushing strength

Last Answer : Answer: Option C

Air is said to be saturated when - (1) it contains maximum content of water vapour (2) its pressure is minimum (3) its thickness is maximum (4) it blows over the barren land

Description : Air is said to be saturated when - (1) it contains maximum content of water vapour (2) its pressure is minimum (3) its thickness is maximum (4) it blows over the barren land

Last Answer : (1) it contains maximum content of water vapour Explanation: When a volume of air at a given temperature holds the maximum amount of water vapour, the air is said to be saturated. Mr is said ... 100 percent or is saturated, moisture will condense, mean-ing the water vapor changes to liquid vapor.

Air is said to be saturated when : (1) it contains maximum content of water vapour (2) its pressure is minimum (3) its thickness is maximum (4) it blows over the barren land

Description : Air is said to be saturated when : (1) it contains maximum content of water vapour (2) its pressure is minimum (3) its thickness is maximum (4) it blows over the barren land

Last Answer :  it contains maximum content of water vapour

What kind of wood and plywood used in home decor?

Description : What kind of wood and plywood used in home decor?

Last Answer : Well, thanks to the growth of the wood and plywood industry, that the answer to this question What kind of wood and plywood used in home decor?' cannot have one single answer. Amulya Mica being ... , the selection depends on you will be using the plywood in future for home décor purpose.In Plywood

What wood is plywood mostly made from

Description : What wood is plywood mostly made from

Last Answer : Birch

Acrylic sheets (A) Possess 10 to 17 times greater breakage resistance than that of glass of equivalent thickness (B) Are generally unaffected by most household detergents (C) Possess the light transmission rate of 93% (D) All the above

Description : Acrylic sheets (A) Possess 10 to 17 times greater breakage resistance than that of glass of equivalent thickness (B) Are generally unaffected by most household detergents (C) Possess the light transmission rate of 93% (D) All the above

Last Answer : Answer: Option D

Drop manholes at the junctions of sewer lines, are provided if A. Invert level of a branch sewer is more than 60 cm that of the main sewer B. Sewer line runs along a main road C. Ordinary manhole cannot be built D. Two sewer lines intersect

Description : Drop manholes at the junctions of sewer lines, are provided if A. Invert level of a branch sewer is more than 60 cm that of the main sewer B. Sewer line runs along a main road C. Ordinary manhole cannot be built D. Two sewer lines intersect

Last Answer : ANS: A

Light waves are bent more easily than sound waves. True or False?

Description : Light waves are bent more easily than sound waves. True or False?

Last Answer : FALSE

Light waves are bent more easily than sound waves. True or False?

Description : Light waves are bent more easily than sound waves. True or False?

Last Answer : FALSE

The cement whose strength is a little lower than the ordinary cement during the first three months but attains afterwards the same strength, is known as (A) Low-heat Portland cement (B) Rapid hardening Portland cement (C) Portland blast slag cement (D) Portland pozzolana cement

Description : The cement whose strength is a little lower than the ordinary cement during the first three months but attains afterwards the same strength, is known as (A) Low-heat Portland cement (B) Rapid hardening Portland cement (C) Portland blast slag cement (D) Portland pozzolana cement

Last Answer : Answer: Option A

Log Angles machine is used to test the aggregate for (A) Crushing strength (B) Impact value (C) Abrasion resistance (D) Water absorption

Description : Log Angles machine is used to test the aggregate for (A) Crushing strength (B) Impact value (C) Abrasion resistance (D) Water absorption

Last Answer : Answer: Option C

Los Angles machine is used to perform (a) Crushing strength (b) Impact test (c) Water absorption (d) Abrasion resistance test

Description : Los Angles machine is used to perform (a) Crushing strength (b) Impact test (c) Water absorption (d) Abrasion resistance test

Last Answer : (d) Abrasion resistance test

If two wires of the same material have the same thickness but different length the blank wire will have greater resistance?

Description : If two wires of the same material have the same thickness but different length the blank wire will have greater resistance?

Last Answer : Materials

My wife spilt coffee with sugar on our laptop, what should I do?

Description : My wife spilt coffee with sugar on our laptop, what should I do?

Last Answer : The keys will pop off if you use a small screw driver (test one that u don't really use first) then with a cloth damp with rubbing alcohol go over the area a qtip will help get into cracks. Don' ... its dripping. Clean rhe keys themselves too. Then use compresed air in a can to dry. Good as new!

What so i spilt tea on my device, I wiped it up. The device is perfectly fine. But my device is stuck in headphone mode. I can't hear anything. I am currently crying because I keep having bad luck with devices. Please help. My mom will be mad?

Description : What so i spilt tea on my device, I wiped it up. The device is perfectly fine. But my device is stuck in headphone mode. I can't hear anything. I am currently crying because I keep having bad luck with devices. Please help. My mom will be mad?

Last Answer : I'm sorry this doesn't make sense. It told me to add what, etc to the sentence.

Assertion :- `Zn(s)+Cu^(+2)(aq)rarr Zn^(+2)(aq)+Cu(s)` can be spilt into following half reactions `{:(Zn(s)rarrZn^(+2)+2e^(-),),(,"(Oxidation half rea

Description : Assertion :- `Zn(s)+Cu^(+2)(aq)rarr Zn^(+2)(aq)+Cu(s)` can be spilt into following half reactions `{:(Zn(s)rarrZn^(+2)+2e^(-),),(,"(Oxidation half rea

Last Answer : Assertion :- `Zn(s)+Cu^(+2)(aq)rarr Zn^(+2)(aq)+Cu(s)` can be spilt into following half ... Reason is False. D. If both Assertion & Reason are False.

In erection of falsework, for a rectangular panel inside a falsework should it be braced along the two diagonals?

Description : In erection of falsework, for a rectangular panel inside a falsework should it be braced along the two diagonals?

Last Answer : When a rectangular panel is subject to an eccentric load or a lateral load, it tends to deform into a parallelogram with one diagonal shortening and the other elongating. Theoretically, it is sufficient to ... may come from both sides of the panel and hence it should be braced in both diagonals.

Plants, soft and green, and can be easily bent is known a. Herbaceous b. Woody c. Shrubs d. Non of these

Description : Plants, soft and green, and can be easily bent is known a. Herbaceous b. Woody c. Shrubs d. Non of these

Last Answer : Herbaceous

The lens equation 1/f = 1/ + 1/ is applicable (A) When the thickness of the lens is small (B) Only to conjugate distances along the principal axis (C) The computed quantities are accurate enough for geometrical optics of simple distances (D) All the above

Description : The lens equation 1/f = 1/ + 1/ is applicable (A) When the thickness of the lens is small (B) Only to conjugate distances along the principal axis (C) The computed quantities are accurate enough for geometrical optics of simple distances (D) All the above

Last Answer : (D) All the above

Whole circle bearing of a line is preferred to a quadrantal bearing merely because (A) Bearing is not completely specified by an angle (B) Bearing is completely specified by an angle (C) Sign of the correction of magnetic declination is different in different quadrants (D) Its Trigonometrical values may be extracted from ordinary tables easily

Description : Whole circle bearing of a line is preferred to a quadrantal bearing merely because (A) Bearing is not completely specified by an angle (B) Bearing is completely specified by an angle ... different in different quadrants (D) Its Trigonometrical values may be extracted from ordinary tables easily

Last Answer : (B) Bearing is completely specified by an angle

Double full fillet welded joint cannot be used for a plate thickness greater than i. 1/8” ii. 3/8” iii. 5/8” iv. None

Description : Double full fillet welded joint cannot be used for a plate thickness greater than i. 1/8” ii. 3/8” iii. 5/8” iv. None

Last Answer : iii. 5/8”

Single full fillet welded joint cannot be used for a plate thickness greater than i. 1/8” ii. 2/8” iii. 3/8” iv. None

Description : Single full fillet welded joint cannot be used for a plate thickness greater than i. 1/8” ii. 2/8” iii. 3/8” iv. None

Last Answer : iii. 3/8”

Wrought iron is not (A) Ductile & resistant to corrosion/rusting (B) Weldable easily (C) Having uniform strength in all directions (D) Having maximum tensile strength along the lines of slag distribution

Description : Wrought iron is not (A) Ductile & resistant to corrosion/rusting (B) Weldable easily (C) Having uniform strength in all directions (D) Having maximum tensile strength along the lines of slag distribution

Last Answer : Option C

Compressive strength of wood is usually more along the grains. The tenile strength of wood as compared to that of steel is about (A) Half (B) One third (C) One fifth (D) One twelfth

Description : Compressive strength of wood is usually more along the grains. The tenile strength of wood as compared to that of steel is about (A) Half (B) One third (C) One fifth (D) One twelfth

Last Answer : (C) One fifth

Plywood is obtained by gluing wooden sheets at (A) 100 to 150 N/cm2 (B) 100 to 130°C (C) Both (A) and (B) (D) Neither (A) n

Description : Plywood is obtained by gluing wooden sheets at (A) 100 to 150 N/cm2 (B) 100 to 130°C (C) Both (A) and (B) (D) Neither (A) nor (b)

Last Answer : Answer: Option C

For the manufacture of plywood, veneers are placed so that grains of adjacent veneers (A) Run at right angles (B) Parallel (C) Inclined at 45° (D) Inclined at 60°

Description : For the manufacture of plywood, veneers are placed so that grains of adjacent veneers (A) Run at right angles (B) Parallel (C) Inclined at 45° (D) Inclined at 60°

Last Answer : Answer: Option A

Plywood is normally available (A) 1 mm thick (B) 2 mm thick (C) 2 to 3 mm thick (D) 3 mm to 4 mm thick

Description : Plywood is normally available (A) 1 mm thick (B) 2 mm thick (C) 2 to 3 mm thick (D) 3 mm to 4 mm thick

Last Answer : Answer: Option D

A current `-` carrying circular loop of radius `R` is placed in the `XY-` plane with centre at the origin. Half of the loop with `xgt0` is now bent so

Description : A current `-` carrying circular loop of radius `R` is placed in the `XY-` plane with centre at the origin. Half of the loop with `xgt0` is now bent so

Last Answer : A current `-` carrying circular loop of radius `R` is placed in the `XY-` plane with centre at the origin. ... B at (0,0,z), z gt gt R is unchanged

According to IS specifications, the compressive strength of ordinary Portland cement after three days should not be less than (A) 7 MPa (B) 11.5 MPa (C) 16 MPa (D) 21 MPa

Description : According to IS specifications, the compressive strength of ordinary Portland cement after three days should not be less than (A) 7 MPa (B) 11.5 MPa (C) 16 MPa (D) 21 MPa

Last Answer : Answer: Option C

The compressive strength an ordinary Portland cement (1:3) after 7 days test should not be less than. (a) 11N/mm2 (b) 17.5 N/mm2 (c) 22 N/mm2 (d) 27.5N/m2

Description : The compressive strength an ordinary Portland cement (1:3) after 7 days test should not be less than. (a) 11N/mm2 (b) 17.5 N/mm2 (c) 22 N/mm2 (d) 27.5N/m2

Last Answer : (b) 17.5 N/mm2

For two plates of equal thickness, full strength of square-edged fillet weld can be ensured if its maximum size is limited to (a) 1.5 mm less than the plate thickness (b) 67% of the plate thickness (c) 80% of the plate thickness (d) Thickness of the plate

Description : For two plates of equal thickness, full strength of square-edged fillet weld can be ensured if its maximum size is limited to (a) 1.5 mm less than the plate thickness (b) 67% of the plate thickness (c) 80% of the plate thickness (d) Thickness of the plate

Last Answer : (a) 1.5 mm less than the plate thickness

Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut (C) A slot is cut in the middle of nut along the length and a cap screw is provided to tighten the two parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Description : Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (A) A smaller nut is tightened against main nut creating friction at the contacting surface

Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut (C) A slot is cut in the middle of nut along the length and a cap screw is provided to tighten the two parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Description : Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut

Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the tip diameter should be equal to t (where, t = plate thickness to be welded) (C) In spot welding, two pieces to be joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Description : Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the ... joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Last Answer : (D) Mild steel sheet cannot be spot welded

Newly constructed pavement with ordinary Portland cement attains its working strength after (A) 7 days (B) 14 days (C) 21 days (D) 28 days

Description : Newly constructed pavement with ordinary Portland cement attains its working strength after (A) 7 days (B) 14 days (C) 21 days (D) 28 days

Last Answer : Answer: Option D

As compared to ordinary Portland cement, use of pozzolana cement (A) Reduces workability (B) Increases bleeding (C) Increases shrinkage (D) Increases strength

Description : As compared to ordinary Portland cement, use of pozzolana cement (A) Reduces workability (B) Increases bleeding (C) Increases shrinkage (D) Increases strength

Last Answer : Answer: Option C

Addition of pozzolana to ordinary port land cement, causes (A) Decrease in early strength (B) Reduction in chemical action with sulphates (C) Increase in shrinkage (D) All the above

Description : Addition of pozzolana to ordinary port land cement, causes (A) Decrease in early strength (B) Reduction in chemical action with sulphates (C) Increase in shrinkage (D) All the above

Last Answer : Answer: Option D

Which of the following cements is expected to have the highest compressive strength after 3 days (a) Ordinary Portland cement (b) Rapid hardening cement (c) High alumina cement (d) Sulphate resisting cement.

Description : Which of the following cements is expected to have the highest compressive strength after 3 days (a) Ordinary Portland cement (b) Rapid hardening cement (c) High alumina cement (d) Sulphate resisting cement.

Last Answer : (c) High alumina cement

Minimum compressive strength of cement required at the age of 3 days for ordinary Portland cement of grade 33 is [ A ] 1.15 N/mm2 [ B ] 11.5 N/mm2 [ C ] 2.10 N/mm2 [ D ] 21 N/mm2

Description : Minimum compressive strength of cement required at the age of 3 days for ordinary Portland cement of grade 33 is [ A ] 1.15 N/mm2 [ B ] 11.5 N/mm2 [ C ] 2.10 N/mm2 [ D ] 21 N/mm2

Last Answer : [ B ] 11.5 N/mm2

Assume that a ray of light passes from glass into air at an angle of incidence greater than zero degrees. Will the ray of light be bent toward or away from the normal as it passes into the air?

Description : Assume that a ray of light passes from glass into air at an angle of incidence greater than zero degrees. Will the ray of light be bent toward or away from the normal as it passes into the air?

Last Answer : ANSWER: AWAY FROM

The ratio of the thickness of web to that of flange of steel rolled structural beams and channels is (A) Less than 1 (B) Equal to 1 (C) Greater than 1 (D) Less than 1 in beams but greater than 1 in channels

Description : The ratio of the thickness of web to that of flange of steel rolled structural beams and channels is (A) Less than 1 (B) Equal to 1 (C) Greater than 1 (D) Less than 1 in beams but greater than 1 in channels

Last Answer : Answer: Option A

Select the correct statement. (A) More the value of group index, less thickness of pavement will be required (B) More the value of CBR, greater thickness of pavement will be required (C) Minimum and maximum values of group index can be 0 and 20 respectively (D) All of the above

Description : Select the correct statement. (A) More the value of group index, less thickness of pavement will be required (B) More the value of CBR, greater thickness of pavement will be required (C) Minimum and maximum values of group index can be 0 and 20 respectively (D) All of the above

Last Answer : Answer: Option C

Wrought iron does not have (A) Uniform strength in all directions (B) Ability to hold protective coating (C) High ductility & corrosion resistance (D) Easily weldable characteristics

Description : Wrought iron does not have (A) Uniform strength in all directions (B) Ability to hold protective coating (C) High ductility & corrosion resistance (D) Easily weldable characteristics

Last Answer : Option A

Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress – strain curve for steel in compression is the same as in tension [ C ] The strain at different points in the section will be same [ D ] Plane section remain plane even after bending

Description : Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress - strain curve for steel in compression is the ... different points in the section will be same [ D ] Plane section remain plane even after bending

Last Answer : [ C ] The strain at different points in the section will be same

In a liquid limit test, the moisture content at 10 blows was 70% and that at 100 blows was 20%. The liquid limit of the soil, is (A) 35 % (B) 50 % (C) 65 % (D) None of these

Description : In a liquid limit test, the moisture content at 10 blows was 70% and that at 100 blows was 20%. The liquid limit of the soil, is (A) 35 % (B) 50 % (C) 65 % (D) None of these

Last Answer : Answer: Option C