Description : Ericsson cycle consists of two constant pressure and two isothermal processes. A. Agree B. Disagree
Last Answer : Answer: A
Description : The isothermal and isentropic processes are reversible non-flow processes. A. Agree B. Disagree
Description : A cycle consisting of one constant pressure, one constant volume and two isentropic processes is known as A.Carnot cycle B.Stirling cycle C.Otto cycle D.Diesel cycle
Last Answer : Answer: D
Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle A. combustion is at constant volume B. expansion and compression are isentropic C. maximum temperature is higher D. heat rejection is lower
Description : Brayton cycle consists’ of following four processes (a) two isothermals and two isentropics (b) two isentropics and two constant volumes (c) two isentropics, one constant volume and one constant pressure (d) two isentropics and two constant pres-sures (e) none of the above.
Last Answer : Answer : d
Description : Diesel cycle consists of following four processes (a) two isothermals and two isentropics (b) two isentropics, and two constant volumes. (c) two isentropics, one constant volume and one constant pressure (d) two isentropics and two constant pressures (e) none of the above.
Last Answer : Answer : c
Description : Otto cycle consists of following four processes (a) two isothermals and two isentropics (b) two isentropics and two constant volumes (c) two isentropics, one constant volume and one constant pressure (d) two isentropics and two constant pres-sures (e) none of the above.
Last Answer : Answer : b
Description : A heat exchange process in which the product of pressure and volume remains constant is known as (a) heat exchange process (b) throttling process (c) isentropic process (d) adiabatic process (e) hyperbolic process.
Last Answer : Answer : e
Description : Gas turbine cycle consists of (a) two isothermals and two isentropics (b) two isentropics and two constant volumes (c) two isentropics, one constant volume and one constant pressure (d) two isentropics and two constant pressures (e) none of the above.
Description : The efficiency of a dual combustion cycle __________ upon cut-off ratio. A. depends B. does not depend
Description : It is used for gas turbines which operates on an open cycle where both the compression and expansion processes take place in rotating machinery. a. Dual Cycle b. Otto Cycle c. Carnot Cycle d. Brayton Cycle
Last Answer : Brayton Cycle
Description : It is a process during which the pressure remains constant a. Adiabatic b. Isentropic c. Isobaric d. Isotropic
Last Answer : Isobaric
Description : A cycle consisting of two adiabatics and two constant pressure processes is known as (a) Otto cycle (b) Ericsson cycle (c) Joule cycle (d) Stirling cycle (e) Atkinson cycle.
Description : The constant pressure, constant volume and constant pvn processes are regarded as irreversible process. A. True B. False
Description : Which of the following processes are thermodynamically reversible (a) throttling (b) free expansion (c) constant volume and constant pressure (d) hyperbolic and pV = C (e) isothermal and adiabatic.
Description : The kinetic energy of molecules of a gas becomes zero at absolute zero temperature. A. Agree B. Disagree
Description : During which of the following process does heat rejection takes place in Carnot cycle? A. Isothermal expansion B. Isentropic expansion C. Isothermal compression D. Isentropic compression
Last Answer : Answer: C
Description : A process during which entropy remains constant is called ______ process A. Isometric B. Isochoric C. Isobaric D. Isentropic
Last Answer : Isentropic
Description : Heat engine deriving its power from the energy liberated by the explosion of a mixture of some hydrocarbon, in a gaseous or vaporized form. a. Dual Combustion Engine b. Internal Combustion Engine c. External Combustion Engine d. None of the above
Last Answer : Internal Combustion Engine
Description : Otto cycle is also known as A. constant pressure cycle B. constant volume cycle C. constant temperature cycle D. constant temperature and pressure cycle
Last Answer : Answer: B
Description : In a Carnot cycle, heat is transferred at (a) constant pressure (b) constant volume (c) constant temperature (d) constant enthaply (e) any one of the above.
Description : Reversed joule cycle is called (a) Carnot cycle (b) Rankine cycle (c) Brayton cycle (d) Bell Coleman cycle (e) Dual cycle.
Description : Occurring at fixed temperature a. isentropic b. Adiabatic c. Isothermal d. polytropic
Last Answer : Isothermal
Description : One for which no heat is gained or lost a. Isentropic b. Adiabatic c. Isothermal d. Polytropic
Last Answer : Adiabatic
Description : A thermodynamic process in which entropy is conserved a. isentropic b. adiabatic c. isothermal d. polytropic
Last Answer : isentropic
Description : Another name of reversible adiabatic process a. Isentropic Process b. Isometric Process c. Isobaric Process d. Isothermal Process
Last Answer : Isentropic Process
Description : The process that has no heat transfer a. Density b. Isentropic Process c. Isometric Process d. Adiabatic
Description : A state occurs in isentropic process a. The change in entropy is 0 b. The change in entropy is 1 c. The change in enthalpy is 0 d. The change in enthalpy is 1
Last Answer : The change in entropy is 0
Description : A state occurs when a system is in equilibrium a. Natural Environment b. Closed System c. Surrounding d. Isentropic
Last Answer : Natural Environment
Description : A ______ is a flow in which the gas flow is adiabatic and frictionless and entropy change is zero. A. Isentropic flow B. Isobaric flow C. Steady flow D. Uniform flow
Last Answer : Isentropic flow
Description : The term “isentropic process” used in thermodynamics implies what? A. Reversible adiabatic process B. Externally reversible, adiabatic process C. Internally reversible, adiabatic process D. Irreversible adiabatic process
Last Answer : Internally reversible, adiabatic process
Description : “A reversible adiabatic process is necessarily isentropic but an isentropic process is not necessarily reversible adiabatic process.” This statement is: A. True B. False C. May be true and may be false D. Absurd
Last Answer : True
Description : How does an adiabatic process compare to an isentropic process? A. Adiabatic heat transfer is not equal to zero; isentropic heat transfer is zero B. Both heat transfer = 0; isentropic: reversible ... is not equal to zero D. Both heat transfer is not equal to zero; isentropic: irreversible
Last Answer : Both heat transfer = 0; isentropic: reversible
Description : The index of compression n tends to reach ratio of specific heats y when (a) flow is uniform and steady (b) process is isentropic (c) process is isothermal (d) process ... specific heat does not change with temperature (e) process is isentropic and specific heat changes with temperature.
Description : Which of the following best describes both Stirling and Ericson engines? a. Internal combustion engine b. External combustion engine c. Diesel cycle d. Rankine cycle
Last Answer : External combustion engine
Description : The Carnot cycle is composed of ______ processes. A. One isothermal and one adiabatic B. One isothermal and two adiabatic C. Two isothermal and one adiabatic D. Two isothermal and two adiabatic
Last Answer : Two isothermal and two adiabatic
Description : The Carnot cycle is composed of how many reversible processes? A. 2 B. 3 C. 4 D. 5
Last Answer : 4
Description : If a system after undergoing a series of processes, returns to the initial state then (a) process is thermodynamically in equilibrium (b) process is executed in closed system cycle (c) its entropy will ... sum of heat and work transfer will be zero (e) no work will be done by the system.
Description : Universal gas constant is defined as equal to product of the molecular weight of the gas and (a) specific heat at constant pressure (b) specific heat at constant volume (c) ratio of two specific heats (d) gas constant (e) unity.
Description : According to Avogadro's Hypothesis (a) the molecular weights of all the perfect gases occupy the same volume under same conditions of pressure and temperature (b) the sum of partial pressure of ... gases have two values of specific heat (e) all systems can be regarded as closed systems.
Last Answer : Answer : a
Description : The volume of a gas under constant pressure increases or decrease with temperature. a. Gay- Lussac’s Law b. Ideal Gas Law c. Charles’ Law d. Boyle’s Law
Last Answer : Charles’ Law
Description : What Law states that the pressure of gas is inversely proportional to its volume at constant temperature? a. Charles’ law b. Gay-Lussac’s Law c. Boyle’s Law d. Dalton’s Law
Last Answer : Boyle’s Law
Description : Is a steady flow process at total constant pressure through a control volume for which there is no heat? a. Adiabatic Saturation Process b. Dew point c. Adiabatic Ratio d. None of the above
Last Answer : Adiabatic Saturation Process
Description : The volume of a confined gas is held constant, the pressure is directly proportional to the absolute temperature. a. Charle’s Law b. Boyle’s Law c. Joule’s Law d. Specific Heat
Description : The pressure of the confined gas is held constant, the volume directly proportional to the absolute temperature. a. Charle’s Law b. Boyle’s Law c. Zeroth Law d. Gas Law
Last Answer : Charle’s Law
Description : “If the temperature o f a fixed quantity of a gas is held constant during a change of state, the volume varies inversely with the absolute pressure. a. Charle’s Law b. Boyle’s Law c. Dalton’s Law d. Amagat’s Law
Description : A gas having a volume of100 ft³ at 27ºC is expanded to 120 ft³by heated at constant pressure to what temperature has it been heated to have this new volume? a. 87°C b. 85°C c. 76°C d. 97°C t2= T2–T1
Last Answer : 87°C
Description : The volume of the gas held at constant pressure increases 4 cm² at 0°C to 5cm². What is the final pressure? a. 68.65ºC b. 68.25ºC c. 70.01°C d. 79.1ºC t2= T2–T1
Last Answer : 981 N
Description : Ten cu ft. of air at 300 psia 400°F is cooled to 140°F at constant volume. What is the final pressure? (formula: p2 = p1T2/T1) a. 0 b. 209 psia c. - 420 psia d. None of the above
Last Answer : 209 psia
Description : Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system. A. 8 kJ B. 10 kJ C.12 kJ D.14 kJ Formula: W = p(V2-V1)
Last Answer : 12 kJ