Description : Calorie is a measure of (a) specific heat (b) quantity of heat (c) thermal capacity (d)entropy (e) work.
Last Answer : Answer : b
Description : Which of the following is the formula for thermal resistance? A. Thickness of material/ thermal conductivity of material B. 2(thickness of material)/thermal conductivity of material C. ... / 2(thermal conductivity of material) D. Thickness of material x thermal conductivity of material
Last Answer : Thickness of material/ thermal conductivity of material
Description : Which of the following items is not a path function (a) heat (b) work (c) kinetic energy (d) vdp (e) thermal conductivity.
Last Answer : Answer : e
Description : The amount of heat energy per kilogram that must be added or removed when a substance changes from one phase to another. a. specific heat b. heat of expansion c. latent heat d. useful heat
Last Answer : latent heat
Description : For most solids, the coefficient of volume expansion is _________ the coefficient of linear expansion. a. unrelated to b. proportional to c. twice d. three times
Last Answer : three times
Description : Which of the following best describes heat? a. The capacity to do work b. Forces times distances c. Sum of thermal and chemical energy d. An energy transfer due to temperature difference
Last Answer : An energy transfer due to temperature difference
Description : Total heat of a substance is also known as (a) internal energy (b) entropy (c) thermal capacity (d) enthalpy (e) thermal conductance.
Last Answer : Answer : d
Description : What refers to the rate of thermal radiation emitter per unit area of a body? A. Thermal conductivity B. Absorptivity C. Emissivity D. Emissive power
Last Answer : Emissive power
Description : Entropy is the measure of: a. The internal energy of a gas b. The heat capacity of a substance c. Randomness or disorder d. The change of enthalpy of a system
Last Answer : Randomness or disorder
Description : What refers to the measure of the disorder present in a given substance or system? A. Enthalpy B. Entropy C. Heat capacity D. Molar heat
Last Answer : Entropy
Description : When an object undergoes thermal expansion, a. any holes in the object expand as well b. any holes in the object remain the same c. mass increases d. molecular activities would cease
Last Answer : any holes in the object expand as well
Description : A stress which develops within an object when it attempts to expand or contract in response to a temperature changes, but cannot, due to being held rigidly in place. a. elongation b. thermal stress c. expansion contraction d. thermal expansion
Last Answer : thermal stress
Description : The change in physical size of a substance when its temperature changes. a. intensive property b. extensive property c. volume expansion d. thermal expansion
Last Answer : thermal expansion
Description : Specific heat capacity in SI unit. a. kJ / kg.k b. kJ / kg c. kN / kg d. None of the above
Last Answer : kJ / kg.k
Description : The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance. a. Specific Heat Capacity b. Latent Heat c. Heat of Transformation d. Internal Heat
Last Answer : Specific Heat Capacity
Description : What is the SI unit of specific heat capacity? A. J/kg B. J/kg °F ∙ C. J/kg °C ∙ D. J/°C
Last Answer : J/kg °C
Description : What is the specific heat capacity of water in J/kg °C? ∙ A. 4581 B. 4185 C. 4518 D. 4815
Last Answer : 4185
Description : The ______ of a substance is the amount of heat that must be added or removed from a unit mass of the substance to change its temperature by one degree. A. Latent heat of fusion B. Molar heat C. Specific heat capacity D. Specific heat
Last Answer : Specific heat capacity
Description : What is defined as the energy required to raise the temperature of a unit mass of a substance by one degree? A. Latent heat of fusion B. Molar heat C. Specific heat capacity D. Specific heat
Last Answer : Specific heat
Description : What is the heat capacity of one gram of a substance? A. Molecular heat B. Specific heat C. Latent heat D. Molar heat
Description : What is the heat capacity of one mole of substance? A. Molecular heat B. Specific heat C. Latent heat D. Molar heat
Last Answer : Molar heat
Description : What refers to the amount of heat needed to raise the temperature of an object by one degree Celsius or 1K? A. Heat capacity B. Specific heat C. Latent heat D. Molar heat
Last Answer : Heat capacity
Description : The coefficient of performance (COP) is the ratio between the: A. Power consumption in watts and heat absorbed per hour B. Heat absorbed per hour and the power consumption in watts C. Work required and the absorbed heat D. Absorbed heat and work required
Last Answer : Absorbed heat and work required
Description : What refers to the amount of heat removed from the cooled space in BTS’s for 1 watt-hour of electricity consumed? A. Cost efficiency rating B. Energy efficiency rating C. Coefficient of performance D. Cost of performance
Last Answer : Energy efficiency rating
Description : Which of the following relations is not applicable in a free expansion process? a. Heat is rejected to zero b. Work done is zero c. Change in temperature is zero d. Heat supplied is zero
Last Answer : Change in temperature is zero
Description : When the expansion of compression of gas takes place without transfer of heat to or from the gas the process is called a. reversible b. adiabatic c. polytropic d. isothermal
Last Answer : adiabatic
Description : When the expansion of compression of gas takes place without transfer of heat or from the gas the process is called; a. Isometric process b. Isothermal process c. Isobaric process d. Adiabatic process
Last Answer : Adiabatic process
Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle A. combustion is at constant volume B. expansion and compression are isentropic C. maximum temperature is higher D. heat rejection is lower
Last Answer : Answer: D
Description : During which of the following process does heat rejection takes place in Carnot cycle? A. Isothermal expansion B. Isentropic expansion C. Isothermal compression D. Isentropic compression
Last Answer : Answer: C
Description : In order that a cycle be reversible, following must be satisfied (a) free expansion or friction resisted expansion/compression process should not be encountered (b) when heat is being absorbed, temperature of hot ... sub-stance should be same (d) all of the above (e) none of the above.
Description : In a free expansion process (a) work done is zero (b) heat transfer is zero (c) both (a) and (b) above (d) work done is zero but heat increases (e) work done is zero but heat decreases.
Last Answer : Answer : c
Description : Which of the following thermodynamic devices operates the reverse of the heat engine? a. Thermal pump b. Thermal evaporator c. Thermal condenser d. Thermal equilibrant
Last Answer : Thermal pump
Description : What states that thermal efficiencies of all reversible heat engines operating between the same two reservoirs are the same and that no heat engine is more efficient than a reversible one operating between the ... A. Ericson principle B. Carnot principle C. Otto principle D. Stirling principle
Last Answer : Carnot principle
Description : What is the highest efficiency of heat engine operating between the two thermal energy reservoirs at temperature limits? A. Ericson efficiency B. Otto efficiency C. Carnot efficiency D. Stirling efficiency
Last Answer : Carnot efficiency
Description : Thermal efficiency is the ratio of: A. Network input to total heat input B. Network output to total heat output C. Network output to total heat input D. Network input to total heat output
Last Answer : Network output to total heat input
Description : What are the only two forms of energy interactions associated with a closed system? A. Kinetic energy and heat B. Heat transfer and work C. Thermal energy and chemical energy D. Latent energy and thermal energy
Last Answer : Heat transfer and work
Description : Which of the following represents the perpetual motion of the first kind (a) engine with 100% thermal efficiency (b) a fully reversible engine (c) transfer of heat energy from low ... its own energy (e) production of energy by temperature differential in sea water at different levels.
Description : Zeroth law of thermodynamics (a) deals with conversion of mass and energy (b) deals with reversibility and irreversibility of process (c) states that if two systems are both in equilibrium with a ... in thermal equilibrium with each other (d) deals with heat engines (e) does not exist.
Description : What is the measure of the energy that is no longer available to perform useful work within the current environment? a. enthalpy b. entropy c. internal energy d. latent heat
Last Answer : entropy
Description : _________ is a measure of the average kinetic energy per molecule in a substance. a. movement b. temperature c. heat d. mass
Last Answer : temperature
Description : The mechanical equivalent of heat is a. joule b. calorie c. Btu d. Specific heat
Last Answer : joule
Description : What refers to the heat needed to change the temperature of the substances without changing its phases? a. Latent heat b. Sensible heat c. Specific heat d. entropy
Last Answer : Sensible heat
Description : Is the force of gravity on unit volume? a. Specific Weight b. Specific Heat c. Specific Pressure d. Specific Volume
Last Answer : Specific Weight
Description : The volume of a confined gas is held constant, the pressure is directly proportional to the absolute temperature. a. Charle’s Law b. Boyle’s Law c. Joule’s Law d. Specific Heat
Last Answer : Boyle’s Law
Description : The ratio of the weight of a substance to the weight of some standard substance is called? a. Specific Heat b. Specific Gravity c. Isothermal d. Specific Weight
Last Answer : Specific Gravity
Description : Sum of the internal energy of a substance and the product of pressure and volume. a. Specific Heat b. Specific Gravity c. Isolated System d. Enthalpy
Last Answer : Enthalpy
Description : A system having a rigid boundary that energy, work and mass does not cross its boundaries a. Specific Heat b. Specific Gravity c. Isolated System d. Enthalpy
Last Answer : Isolated System
Description : A unit of pressure used in high vacuum technology, which is equal to 1mmhg. a. specific heat b. isometric c. isobaric d. torr
Last Answer : torr
Description : The heat per unit mass per degree change in temperature a. specific heat b. isometric c. conservation of energy d. none of the above
Last Answer : specific heat
Description : Gas being heated at constant volume is undergoing the process of. a. isometric b. specific heat c. enthalpy d. isothermal
Last Answer : isometric