The coefficient of performance (COP) is the ratio between the:  A. Power consumption in watts and heat absorbed per hour  B. Heat absorbed per hour and the power consumption in watts  C. Work required and the absorbed heat  D. Absorbed heat and work required

The coefficient of performance (COP) is the ratio between the:  A. Power consumption in watts and heat absorbed per hour  B. Heat absorbed per hour and the power consumption in watts  C. Work required and the absorbed heat  D. Absorbed heat and work required
by

1 Answer

Answer :

Absorbed heat and work required
by

Related questions

Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)?  A. EER = 2.34 COP  B. EER = 3.24 COP  C. EER = 3.42 COP  D. EER = 4.23 COP

Description : Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)?  A. EER = 2.34 COP  B. EER = 3.24 COP  C. EER = 3.42 COP  D. EER = 4.23 COP

Last Answer : EER = 3.42 COP

What refers to the amount of heat removed from the cooled space in BTS’s for 1 watt-hour of electricity consumed?  A. Cost efficiency rating  B. Energy efficiency rating  C. Coefficient of performance  D. Cost of performance

Description : What refers to the amount of heat removed from the cooled space in BTS’s for 1 watt-hour of electricity consumed?  A. Cost efficiency rating  B. Energy efficiency rating  C. Coefficient of performance  D. Cost of performance

Last Answer : Energy efficiency rating

The value for the ΔU of a system is -120 J. If the system is known to have absorbed 420 J of heat, how much work was done?  a. -540 J  b. -640 J  c. -740 J  d. -840 J formula: ΔU = q +w

Description : The value for the ΔU of a system is -120 J. If the system is known to have absorbed 420 J of heat, how much work was done?  a. -540 J  b. -640 J  c. -740 J  d. -840 J formula: ΔU = q +w

Last Answer : -540 J

The heat absorbed by a unit mass of a material at its holding point in order to convert the material into a gas at the same temperature.  a. Latent Heat of Sublimation  b. Latent Heat of Vaporization  c. Latent Heat of Fusion  d. Latent Heat Of Condensation

Description : The heat absorbed by a unit mass of a material at its holding point in order to convert the material into a gas at the same temperature.  a. Latent Heat of Sublimation  b. Latent Heat of Vaporization  c. Latent Heat of Fusion  d. Latent Heat Of Condensation

Last Answer : Latent Heat of Vaporization

Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into heating the roof. The specific heat of concrete is about 900 J/kg, and the density is about 2,300 kg/m3 .  a. 7.9 °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Description : Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into ... °C  b. 8.9°C  c. 9.9°C  d. 10.9°C formula: ΔQ = m c ΔT

Last Answer : 7.9 °C

What refers to the amount of energy absorbed or released during a phase-change process?  A. Molar heat  B. Latent heat  C. Vaporization heat  D. Condensation heat

Description : What refers to the amount of energy absorbed or released during a phase-change process?  A. Molar heat  B. Latent heat  C. Vaporization heat  D. Condensation heat

Last Answer : Latent heat

The area under the temperatureentropy curve (T – s curve) of any thermodynamic process represents  A. heat absorbed  B. heat rejected  C. either (a) or (b)  D. none of these

Description : The area under the temperatureentropy curve (T – s curve) of any thermodynamic process represents  A. heat absorbed  B. heat rejected  C. either (a) or (b)  D. none of these

Last Answer :  C. either (a) or (b)

In order that a cycle be reversible, following must be satisfied  (a) free expansion or friction resisted expansion/compression process should not be encountered  (b) when heat is being absorbed, temperature of hot source and working sub¬stance should be same  (c) when beat is being rejected, temperature of cold source and working sub-stance should be same  (d) all of the above  (e) none of the above.

Description : In order that a cycle be reversible, following must be satisfied  (a) free expansion or friction resisted expansion/compression process should not be encountered  (b) when heat is being absorbed, temperature of hot ... sub-stance should be same  (d) all of the above  (e) none of the above.

Last Answer : Answer : d

What is a measure of the ability of a material to conduct heat?  A. Specific heat capacity  B. Coefficient of thermal expansion  C. Coefficient of thermal conductivity  D. Thermal conductivity

Description : What is a measure of the ability of a material to conduct heat?  A. Specific heat capacity  B. Coefficient of thermal expansion  C. Coefficient of thermal conductivity  D. Thermal conductivity

Last Answer : Thermal conductivity

What is defined as the ratio of the change in temperature to the change in pressure when a real gas is throttled?  A. Rankine coefficient  B. Kelvin coefficient  C. Maxwell-Boltzmann coefficient  D. Joule-Thomson coefficient

Description : What is defined as the ratio of the change in temperature to the change in pressure when a real gas is throttled?  A. Rankine coefficient  B. Kelvin coefficient  C. Maxwell-Boltzmann coefficient  D. Joule-Thomson coefficient

Last Answer : Joule-Thomson coefficient

3 horsepower (hp) = _____________watts?  a) 1492 watts  b) 2238 watts  c) 746 watts  d) 2238 kilowatts Formula: 1hp= 746 watts

Description : 3 horsepower (hp) = _____________watts?  a) 1492 watts  b) 2238 watts  c) 746 watts  d) 2238 kilowatts Formula: 1hp= 746 watts

Last Answer : 2238 watts

The unit’of universal gas constant is  (a) watts/°K  (b) dynes/°C  (c) ergscm/°K  (d)erg/°K  (e) none of the above.

Description : The unit’of universal gas constant is  (a) watts/°K  (b) dynes/°C  (c) ergscm/°K  (d)erg/°K  (e) none of the above.

Last Answer : Answer : d

What horse power is required to isothermally compress 800 ft^3 of Air per minute from 14.7 psia to 120 psia?  A. 28 hp  B.108 hp  C.256 hp  D.13900 hp Formula: W= p1V1 ln (p1/p2) Power = dW / dt

Description : What horse power is required to isothermally compress 800 ft^3 of Air per minute from 14.7 psia to 120 psia?  A. 28 hp  B.108 hp  C.256 hp  D.13900 hp Formula: W= p1V1 ln (p1/p2) Power = dW / dt

Last Answer : 108 hp

Full form of COP is A. Coefficient of Pressure B. Coefficient of performance C. Coefficient of program D. None of the above

Description : Full form of COP is A. Coefficient of Pressure B. Coefficient of performance C. Coefficient of program D. None of the above

Last Answer : Coefficient of performance

At Equilibrium, the radiation emitted must equal the radiation absorbed.  a. Boyle’s Law  b. Planck’s Law  c. Kirchoff’s Law  d. Joule’s Law

Description : At Equilibrium, the radiation emitted must equal the radiation absorbed.  a. Boyle’s Law  b. Planck’s Law  c. Kirchoff’s Law  d. Joule’s Law

Last Answer : Kirchoff’s Law

What refers to the heating of the earth’s atmosphere not caused by direct sunlight but by infrared light radiated by the surface and absorbed mainly by atmospheric carbon dioxide?  A. Greenhouse effect  B. Global warming  C. Thermal rise effect  D. Ozone effect

Description : What refers to the heating of the earth’s atmosphere not caused by direct sunlight but by infrared light radiated by the surface and absorbed mainly by atmospheric carbon dioxide?  A. Greenhouse effect  B. Global warming  C. Thermal rise effect  D. Ozone effect

Last Answer : Greenhouse effect

What is the energy absorbed during chemical reaction under constant volume conditions?  A. Entropy  B. Ion exchange  C. Enthalpy  D. Enthalpy of reaction

Description : What is the energy absorbed during chemical reaction under constant volume conditions?  A. Entropy  B. Ion exchange  C. Enthalpy  D. Enthalpy of reaction

Last Answer : Enthalpy

What is the ratio of the useful heat extracted to heating value?  A. Combustion efficiency  B. Phase efficiency  C. Heat efficiency  D. Work efficiency

Description : What is the ratio of the useful heat extracted to heating value?  A. Combustion efficiency  B. Phase efficiency  C. Heat efficiency  D. Work efficiency

Last Answer : Combustion efficiency

For most solids, the coefficient of volume expansion is _________ the coefficient of linear expansion.  a. unrelated to  b. proportional to  c. twice  d. three times

Description : For most solids, the coefficient of volume expansion is _________ the coefficient of linear expansion.  a. unrelated to  b. proportional to  c. twice  d. three times

Last Answer : three times

_________ is the quantity of heat required to raise the temperature of one pound of water 1 F˚ from 63 ˚F to 64 ˚F.  a. one Joule  b. one calorie  c. one watt  d. one BTU

Description : _________ is the quantity of heat required to raise the temperature of one pound of water 1 F˚ from 63 ˚F to 64 ˚F.  a. one Joule  b. one calorie  c. one watt  d. one BTU

Last Answer : one BTU

How many kilocalories of heat are required to heat 750 g of water from 35˚C to 55˚C.  a. 15  b. 1500  c. 1.5 x 10^4  d. 6.3 x 10^4

Description : How many kilocalories of heat are required to heat 750 g of water from 35˚C to 55˚C.  a. 15  b. 1500  c. 1.5 x 10^4  d. 6.3 x 10^4

Last Answer : 15

What is defined as the energy required to raise the temperature of a unit mass of a substance by one degree?  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Description : What is defined as the energy required to raise the temperature of a unit mass of a substance by one degree?  A. Latent heat of fusion  B. Molar heat  C. Specific heat capacity  D. Specific heat

Last Answer : Specific heat

The amount of heat required to raise the temperature of 1 pound of water by 1°F is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Description : The amount of heat required to raise the temperature of 1 pound of water by 1°F is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Last Answer : BTU

The amount of heat required to raise the temperature of 1kg of water through 1 °C is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Description : The amount of heat required to raise the temperature of 1kg of water through 1 °C is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Last Answer : Kilocalorie

The specific heat at constant volume is  A. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant pressure  B. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant volume  C. the amount of heat required to raise the temperature of 1 kg of water through one degree  D. any one of the above

Description : The specific heat at constant volume is  A. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant pressure  B. the amount of heat required to raise ... to raise the temperature of 1 kg of water through one degree  D. any one of the above

Last Answer : Answer: B

The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called  A.specific heat at constant volume  B.specific heat at constant pressure  C.kilo Joule  D.none of these

Description : The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called  A.specific heat at constant volume  B.specific heat at constant pressure  C.kilo Joule  D.none of these

Last Answer : Answer: A

The thermal efficiency of a reversible heat engine operating between two given thermal reservoirs is 0.4. The device is used either as a refrigerator or as a heat pump between the same reservoirs. Then the coefficient of performance as a refrigerator (COP)R and the co-efficient of performance as a heat pump (COP)HP are (A) (COP)R = (COP)HP = 0.6 (B) (COP)R = 2.5; (COP)HP = 1.5 (C) (COP)R = 1.5; (COP)HP = 2.5 (D) (COP)R = (COP)HP = 2.5

Description : The thermal efficiency of a reversible heat engine operating between two given thermal reservoirs is 0.4. The device is used either as a refrigerator or as a heat pump between the same reservoirs. Then the coefficient of performance as a ... )R = 1.5; (COP)HP = 2.5 (D) (COP)R = (COP)HP = 2.5

Last Answer : (C) (COP)R = 1.5; (COP)HP = 2.5

Is a steady flow process at total constant pressure through a control volume for which there is no heat?  a. Adiabatic Saturation Process  b. Dew point  c. Adiabatic Ratio  d. None of the above

Description : Is a steady flow process at total constant pressure through a control volume for which there is no heat?  a. Adiabatic Saturation Process  b. Dew point  c. Adiabatic Ratio  d. None of the above

Last Answer : Adiabatic Saturation Process

The ratio of the weight of a substance to the weight of some standard substance is called?  a. Specific Heat  b. Specific Gravity  c. Isothermal  d. Specific Weight

Description : The ratio of the weight of a substance to the weight of some standard substance is called?  a. Specific Heat  b. Specific Gravity  c. Isothermal  d. Specific Weight

Last Answer : Specific Gravity

Specific heat ratio is always  a. > 1  b. < 1  c. = 1  d. none of the above

Description : Specific heat ratio is always  a. > 1  b. < 1  c. = 1  d. none of the above

Last Answer : > 1

The ratio of the change in energy in the form of the heat  a. relative density  b. specific heat  c. specific gravity  d. none of the above

Description : The ratio of the change in energy in the form of the heat  a. relative density  b. specific heat  c. specific gravity  d. none of the above

Last Answer : specific heat

Thermal efficiency is the ratio of:  A. Network input to total heat input  B. Network output to total heat output  C. Network output to total heat input  D. Network input to total heat output

Description : Thermal efficiency is the ratio of:  A. Network input to total heat input  B. Network output to total heat output  C. Network output to total heat input  D. Network input to total heat output

Last Answer : Network output to total heat input

Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Last Answer : Answer: D

The ratio of specific heat at constant pressure (Cp) and specific heat at constant volume (cv) is  A. equal to one  B. less than one  C. greater than one  D. none of these

Description : The ratio of specific heat at constant pressure (Cp) and specific heat at constant volume (cv) is  A. equal to one  B. less than one  C. greater than one  D. none of these

Last Answer : Answer: C

For same compression ratio and for same heat added  (a) Otto cycle is more efficient than Diesel cycle  (b) Diesel cycle is more efficient than Otto cycle  (c) efficiency depends on other factors  (d) both Otto and Diesel cycles are equally efficient  (e) none of the above.

Description : For same compression ratio and for same heat added  (a) Otto cycle is more efficient than Diesel cycle  (b) Diesel cycle is more efficient than Otto cycle  (c) efficiency depends on other factors  (d) both Otto and Diesel cycles are equally efficient  (e) none of the above.

Last Answer : Answer : a

Universal gas constant is defined as equal to product of the molecular weight of the gas and  (a) specific heat at constant pressure  (b) specific heat at constant volume  (c) ratio of two specific heats  (d) gas constant  (e) unity.

Description : Universal gas constant is defined as equal to product of the molecular weight of the gas and  (a) specific heat at constant pressure  (b) specific heat at constant volume  (c) ratio of two specific heats  (d) gas constant  (e) unity.

Last Answer : Answer : d

The index of compression n tends to reach ratio of specific heats y when  (a) flow is uniform and steady  (b) process is isentropic  (c) process is isothermal  (d) process is isentropic and specific heat does not change with temperature  (e) process is isentropic and specific heat changes with temperature.

Description : The index of compression n tends to reach ratio of specific heats y when  (a) flow is uniform and steady  (b) process is isentropic  (c) process is isothermal  (d) process ... specific heat does not change with temperature  (e) process is isentropic and specific heat changes with temperature.

Last Answer : Answer : d

The heat per unit mass per degree change in temperature  a. specific heat  b. isometric  c. conservation of energy  d. none of the above

Description : The heat per unit mass per degree change in temperature  a. specific heat  b. isometric  c. conservation of energy  d. none of the above

Last Answer : specific heat

_________ is a measure of the average kinetic energy per molecule in a substance.  a. movement  b. temperature  c. heat  d. mass

Description : _________ is a measure of the average kinetic energy per molecule in a substance.  a. movement  b. temperature  c. heat  d. mass

Last Answer : temperature

The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Description : The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Last Answer : Specific Heat Capacity

The amount of heat energy per kilogram that must be added or removed when a substance changes from one phase to another.  a. specific heat  b. heat of expansion  c. latent heat  d. useful heat

Description : The amount of heat energy per kilogram that must be added or removed when a substance changes from one phase to another.  a. specific heat  b. heat of expansion  c. latent heat  d. useful heat

Last Answer : latent heat

What is an energy that can be transferred from one object to another causing a change in temperature of each object?  A. Power  B. Heat transfer  C. Heat  D. Work

Description : What is an energy that can be transferred from one object to another causing a change in temperature of each object?  A. Power  B. Heat transfer  C. Heat  D. Work

Last Answer : Heat

What is defined as the force per unit area?  A. Pressure  B. Energy  C. Work  D. Power

Description : What is defined as the force per unit area?  A. Pressure  B. Energy  C. Work  D. Power

Last Answer : Pressure

The unit of time in S.I. units is  (a) second  (b) minute  (c) hour  (d) day  (e) year

Description : The unit of time in S.I. units is  (a) second  (b) minute  (c) hour  (d) day  (e) year

Last Answer : Answer : a

Heat engine deriving its power from the energy liberated by the explosion of a mixture of some hydrocarbon, in a gaseous or vaporized form.  a. Dual Combustion Engine  b. Internal Combustion Engine  c. External Combustion Engine  d. None of the above

Description : Heat engine deriving its power from the energy liberated by the explosion of a mixture of some hydrocarbon, in a gaseous or vaporized form.  a. Dual Combustion Engine  b. Internal Combustion Engine  c. External Combustion Engine  d. None of the above

Last Answer : Internal Combustion Engine

It states that mass is a commodity that can neither be heated nor destroyed with the exception of nuclear processes where the conversion of mass into energy is a fundamental principle  a. Law of Conservation of Mass  b. Law of Conservation of Energy  c. Law of Conservation of Power  d. Law of Conservation of Heat

Description : It states that mass is a commodity that can neither be heated nor destroyed with the exception of nuclear processes where the conversion of mass into energy is a fundamental principle  a. Law of ... Conservation of Energy  c. Law of Conservation of Power  d. Law of Conservation of Heat

Last Answer : Law of Conservation of Mass

Boiling temperature of a material is dependent on its _________.  a. volume  b. power  c. heat  d. pressure

Description : Boiling temperature of a material is dependent on its _________.  a. volume  b. power  c. heat  d. pressure

Last Answer : pressure

The term “thermodynamics” comes from Greek words “therme” and “dynamis” which means _______.  A. Heat power  B. Heat transfer  C. Heat energy

Description : The term “thermodynamics” comes from Greek words “therme” and “dynamis” which means _______.  A. Heat power  B. Heat transfer  C. Heat energy  D. Heat motion

Last Answer : Heat power

What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Description : What is defined as the ratio of the net electrical power output to the rate of fuel energy input?  A. Combustion efficiency  B. Thermal efficiency  C. Overall efficiency  D. Furnace efficiency

Last Answer : Overall efficiency

What refers to the rate of thermal radiation emitter per unit area of a body?  A. Thermal conductivity  B. Absorptivity  C. Emissivity  D. Emissive power

Description : What refers to the rate of thermal radiation emitter per unit area of a body?  A. Thermal conductivity  B. Absorptivity  C. Emissivity  D. Emissive power

Last Answer : Emissive power