Description : What is a process during which the specific volume remains constant? A. Isobaric process B. Isothermal process C. Isochoric or isometric process D. Isovolumetric process
Last Answer : Isochoric or isometric process
Description : A process during which entropy remains constant is called ______ process A. Isometric B. Isochoric C. Isobaric D. Isentropic
Last Answer : Isentropic
Description : What is a process during which the pressure remains constant? A. Isobaric process B. Isothermal process C. Isochoric process D. Isometric process
Last Answer : Isobaric process
Description : What is a process during which the temperature remains constant? A. Isobaric process B. Isothermal process C. Isochoric process D. Isometric process
Last Answer : Isothermal process
Description : An adiabatic process in which there is no change in system enthalpy but for which there is a significant decrease in pressure is called _____. A. Isochoric process B. Isobaric process C. Throttling process D. Quasistatic process
Last Answer : Throttling process
Description : Most cooking activities involve _________ process. a. Isochoric b. Isothermal c. Isobaric d. Isovolumic
Last Answer : Isobaric
Description : The boiling of water into steam in an open container is an example of a/an _________ process. a. adiabatic b. isochoric c. isobaric d. zero work
Last Answer : isobaric
Description : If there is no heat transferred during the process, it is called a ______ process. A. Static B. Isobaric C. Polytropic D. Adiabatic
Last Answer : Adiabatic
Description : Isochoric process is one in which (a) free expansion takes place (b) very little mechanical work is done by the system (c) no mechanical work is done by the system (d) all parameters remain constant
Last Answer : Answer : c
Description : What gas thermometer is based on the principle that at low pressure, the temperature of a gas is proportional to its pressure at constant volume? A. Constant-pressure gas thermometer B. Isobaric gas thermometer C. Isometric gas thermometer D. Constant-volume gas thermometer
Last Answer : Constant-volume gas thermometer
Description : It is a process during which the pressure remains constant a. Adiabatic b. Isentropic c. Isobaric d. Isotropic
Description : What is another term used for isometric processes? a. Isochoric process b. Iolytropic process c. Isothermal process d. Reversible process
Last Answer : Isochoric process
Description : When the expansion of compression of gas takes place without transfer of heat or from the gas the process is called; a. Isometric process b. Isothermal process c. Isobaric process d. Adiabatic process
Last Answer : Adiabatic process
Description : Another name of reversible adiabatic process a. Isentropic Process b. Isometric Process c. Isobaric Process d. Isothermal Process
Last Answer : Isentropic Process
Description : _________ is a thermodynamic potential that measures the “useful” or process-initiating work obtainable from an isothermal, isobaric thermodynamic system. a. Du-Pont Potential b. Gibbs free energy c. Rabz-Eccles Energy d. Claussius Energy
Last Answer : Gibbs free energy
Description : What type of pressure cannot be used for Boyle’s Law? a. Atmospheric Pressure b. Gauge Pressure c. Surface Pressure d. Isobaric Pressure
Last Answer : Gauge Pressure
Description : In __________ process, there is an increase in entropy with no degradation of energy. (A) Isothermal expansion (B) Isochoric heat addition (C) Polytropic expansion (D) Isobaric heat addition
Last Answer : (A) Isothermal expansion
Description : Which of the following engines is the most efficient? a. Isobaric expansion b. Adiabatic compression c. Adiabatic expansion d. Isothermal expansion
Last Answer : Isobaric expansion
Description : A unit of pressure used in high vacuum technology, which is equal to 1mmhg. a. specific heat b. isometric c. isobaric d. torr
Last Answer : torr
Description : _________ is defined as that equivalent to the pressure due to a column of mercury 76cm long. a. surface pressure b. gage pressure c. standard atmospheric pressure d. isobaric pressure
Last Answer : standard atmospheric pressure
Description : A ______ is a flow in which the gas flow is adiabatic and frictionless and entropy change is zero. A. Isentropic flow B. Isobaric flow C. Steady flow D. Uniform flow
Last Answer : Isentropic flow
Description : The change in physical size of a substance when its temperature changes. a. intensive property b. extensive property c. volume expansion d. thermal expansion
Last Answer : thermal expansion
Description : An adiabatic process is one in which A.no heat enters or leaves the gas B.the temperature of the gas changes C.the change in internal energy is equal to the mechanical workdone D.all of the above
Last Answer : Answer: D
Description : There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and ... (Formula: T2= T1p2/ p1) a. 999 K b. 888 K c. 456 K d. One of the above
Last Answer : 999 K
Description : What remains constant during a steady-flow process? A. Mass B. Energy content of the control volume C. Temperature D. Mass and energy content of the control volume
Last Answer : Mass and energy content of the control volume
Description : What is defined as a process during which a fluid flows through a control volume steadily? A. Transient-flow process B. Steady and uniform process C. Uniform-flow process D. Steady-flow process
Last Answer : Steady-flow process
Description : A gas is compressed in a cylinder by a movable piston to a volume onehalf its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be (a) 300 Nm (b) 300,000 Nm (c) 30 Nm (d) 3000 Nm (e) 30,000 Nm.
Last Answer : Answer : b
Description : Is a steady flow process at total constant pressure through a control volume for which there is no heat? a. Adiabatic Saturation Process b. Dew point c. Adiabatic Ratio d. None of the above
Last Answer : Adiabatic Saturation Process
Description : ________ is a succession of changes that ends with the return of the body or system to its initial state. a. process b. system c. equilibrium d. cycle
Last Answer : cycle
Description : In a non-flow reversible process for which p = (- 3V+ 15) x 105N/m2,V changes from 1 m to 2 m3. The work done will be about (a) 100 xlOO5 joules (b) lxlO5 joules (c) 10 xlO5 joules (d) 10 xlO5 kilo joules (e) 10xl04ki\ojoules.
Description : The index of compression n tends to reach ratio of specific heats y when (a) flow is uniform and steady (b) process is isentropic (c) process is isothermal (d) process ... specific heat does not change with temperature (e) process is isentropic and specific heat changes with temperature.
Last Answer : Answer : d
Description : Name the state variables that remain constant in isobaric and isochoric process.
Last Answer : Ans. Pressure and Volume .
Description : Change of state namely evaporation condensation, freezing and melting is an __________ process. (A) Isothermal (B) Adiabatic (C) Isobaric (D) Isochoric
Last Answer : (A) Isothermal
Description : Heating of water under atmospheric pressure is an __________ process. (A) Isochoric (B) Isobaric (C) Adiabatic (D) Isothermal
Last Answer : (B) Isobaric
Description : Represent Isobaric, Isochoric, Isothermal, Adiabatic process on P-V and T-S diagram.
Last Answer : Isobaric process Isothermal process Isochoric process Adiabatic process:
Description : A control volume refers to what? a. A fixed region in space b. A reversible process c. an isolated system d. a specified mass
Last Answer : A fixed region in space
Description : What is referred to by control volume? a. An isolated system b. Closed system c. Fixed region in space d. Reversible process only
Last Answer : Fixed region in space
Description : Gas being heated at constant volume is undergoing the process of. a. isometric b. specific heat c. enthalpy d. isothermal
Last Answer : isometric
Description : The constant pressure, constant volume and constant pvn processes are regarded as irreversible process. A. True B. False
Last Answer : Answer: A
Description : If the value of n = 0 in the equation pvn = C, then the process is called A. constant volume process B. adiabatic process C. constant pressure process D. isothermal process
Last Answer : Answer: C
Description : Change in internal energy in a closed system is equal to heat transferred if the reversible process takes place at constant (a) pressure (b) temperature (c) volume (d) internal energy (e) entropy.
Description : Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant (a) pressure (b) temperature (c) volume (d) internal energy (e) entropy.
Last Answer : Answer : a
Description : Work done is zero for the following process (a) constant volume (b) free expansion (c) throttling (d) all Of the above (e) none of the above.
Description : A heat exchange process in which the product of pressure and volume remains constant is known as (a) heat exchange process (b) throttling process (c) isentropic process (d) adiabatic process (e) hyperbolic process.
Last Answer : Answer : e
Description : If value of n is infinitely large in a polytropic process pV” = C, then the process is known as constant (a) volume (b) pressure (c) temperature (d) enthalpy (e) entropy
Description : “If the temperature o f a fixed quantity of a gas is held constant during a change of state, the volume varies inversely with the absolute pressure. a. Charle’s Law b. Boyle’s Law c. Dalton’s Law d. Amagat’s Law
Last Answer : Boyle’s Law
Description : What is the energy absorbed during chemical reaction under constant volume conditions? A. Entropy B. Ion exchange C. Enthalpy D. Enthalpy of reaction
Last Answer : Enthalpy
Description : _____ is that property of a substance which remains constant if no heat enters or leaves the substance, while it does work or alters its volume, but which increases or diminishes should a small amount of heat enter or leave. a. Entrophy b. Enthalpy c. Specific Heat d. None of the above
Last Answer : Entrophy
Description : An automobile tire has a gauge pressure of 200 kpa at 0°C assuming no air leaks and no change of volume of the tire, what is the gauge pressure at 35ºC. a. 298.645 b. 398.109 c. 291.167 d. 281.333 Pg = Pabs - Patm
Last Answer : 298.645
Description : The gas in a constant gas thermometer cooled to absolute zero would have _________. a. no volume b. no pressure c. zero temperature at all scales d. none of the above
Last Answer : no pressure