Description : The boiling of water into steam in an open container is an example of a/an _________ process. a. adiabatic b. isochoric c. isobaric d. zero work
Last Answer : isobaric
Description : An ideal gas of volume 1liter and pressure 10 bar undergoes a quasistatic adiabatic expansion until the pressure drops to 1 bar. Assume γ to be 1.4 what is the final volume? a. 3.18 l b. 4.18 l c. 5.18 l d. 6.18 l
Last Answer : 5.18 l
Description : What is a process during which the pressure remains constant? A. Isobaric process B. Isothermal process C. Isochoric process D. Isometric process
Last Answer : Isobaric process
Description : No volume changes occur during this type of process a. Isobaric process b. Isomillimetric process c. Isocaloric process d. Isochoric process
Last Answer : Isochoric process
Description : A process during which entropy remains constant is called ______ process A. Isometric B. Isochoric C. Isobaric D. Isentropic
Last Answer : Isentropic
Description : Most cooking activities involve _________ process. a. Isochoric b. Isothermal c. Isobaric d. Isovolumic
Last Answer : Isobaric
Description : What is a process during which the specific volume remains constant? A. Isobaric process B. Isothermal process C. Isochoric or isometric process D. Isovolumetric process
Last Answer : Isochoric or isometric process
Description : What is a process during which the temperature remains constant? A. Isobaric process B. Isothermal process C. Isochoric process D. Isometric process
Last Answer : Isothermal process
Description : A heat exchange process in which the product of pressure and volume remains constant is known as (a) heat exchange process (b) throttling process (c) isentropic process (d) adiabatic process (e) hyperbolic process.
Last Answer : Answer : e
Description : It is a process during which the pressure remains constant a. Adiabatic b. Isentropic c. Isobaric d. Isotropic
Description : If there is no heat transferred during the process, it is called a ______ process. A. Static B. Isobaric C. Polytropic D. Adiabatic
Last Answer : Adiabatic
Description : If a fluid expands suddenly into vacuum through an orifice of large dimension, then such a process is called (a) free expansion (b) hyperbolic expansion (c) adiabatic expansion (d) parabolic expansion (e) throttling.
Last Answer : Answer : a
Description : Which of the following processes are thermodynamically reversible (a) throttling (b) free expansion (c) constant volume and constant pressure (d) hyperbolic and pV = C (e) isothermal and adiabatic.
Description : When the expansion of compression of gas takes place without transfer of heat or from the gas the process is called; a. Isometric process b. Isothermal process c. Isobaric process d. Adiabatic process
Last Answer : Adiabatic process
Description : Which of the following processes is irreversible process (a) isothermal (b) adiabatic (c) throttling (d) all of the above (e) none of the above.
Last Answer : Answer : c
Description : If a gas vapour is allowed to expand through a very minute aperture, then such a process is known as (a) free expansion (b) hyperbolic expansion (c) adiabatic expansion (d) parabolic expansion (e) throttling.
Description : Another name of reversible adiabatic process a. Isentropic Process b. Isometric Process c. Isobaric Process d. Isothermal Process
Last Answer : Isentropic Process
Description : A ______ is a flow in which the gas flow is adiabatic and frictionless and entropy change is zero. A. Isentropic flow B. Isobaric flow C. Steady flow D. Uniform flow
Last Answer : Isentropic flow
Description : Which of the following engines is the most efficient? a. Isobaric expansion b. Adiabatic compression c. Adiabatic expansion d. Isothermal expansion
Last Answer : Isobaric expansion
Description : Heating of water under atmospheric pressure is an __________ process. (A) Isochoric (B) Isobaric (C) Adiabatic (D) Isothermal
Last Answer : (B) Isobaric
Description : Change of state namely evaporation condensation, freezing and melting is an __________ process. (A) Isothermal (B) Adiabatic (C) Isobaric (D) Isochoric
Last Answer : (A) Isothermal
Description : During throttling process (a) heat exchange does not take place (b) no work is done by expanding steam (c) there is no change of internal energy of steam (d) all of the above (e) entropy decreases.
Last Answer : Answer : d
Description : Isochoric process is one in which (a) free expansion takes place (b) very little mechanical work is done by the system (c) no mechanical work is done by the system (d) all parameters remain constant
Description : In thermodynamics, a throttling process, also called a _________, is a type of isenthalpic process where a liquid or gas is cooled as it passes from a higher pressure state to a lower pressure state. a. Rankine Process b. Carnot Cycle c. Joule-Thomson process d. Refrigeration process
Last Answer : Joule-Thomson process
Description : Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant (a) pressure (b) temperature (c) volume (d) internal energy (e) entropy.
Description : The greater the pressure difference in throttling, the lesser is the irreversibility. A. Yes B. No
Last Answer : Answer: B
Description : Represent Isobaric, Isochoric, Isothermal, Adiabatic process on P-V and T-S diagram.
Last Answer : Isobaric process Isothermal process Isochoric process Adiabatic process:
Description : What is another term used for isometric processes? a. Isochoric process b. Iolytropic process c. Isothermal process d. Reversible process
Description : _____ is that property of a substance which remains constant if no heat enters or leaves the substance, while it does work or alters its volume, but which increases or diminishes should a small amount of heat enter or leave. a. Entrophy b. Enthalpy c. Specific Heat d. None of the above
Last Answer : Entrophy
Description : _________ is a thermodynamic potential that measures the “useful” or process-initiating work obtainable from an isothermal, isobaric thermodynamic system. a. Du-Pont Potential b. Gibbs free energy c. Rabz-Eccles Energy d. Claussius Energy
Last Answer : Gibbs free energy
Description : Is a steady flow process at total constant pressure through a control volume for which there is no heat? a. Adiabatic Saturation Process b. Dew point c. Adiabatic Ratio d. None of the above
Last Answer : Adiabatic Saturation Process
Description : Wet steam at 1 MPa flowing through a pipe is throttled to a pressure of 0.1 MPa. If the throttling temperature is110°C, What is the quality of the steam in the pipe? a) 96% b) 86% c) 76% d) 66%
Last Answer : 96%
Description : Work done is zero for the following process (a) constant volume (b) free expansion (c) throttling (d) all Of the above (e) none of the above.
Description : An adiabatic process is one in which A.no heat enters or leaves the gas B.the temperature of the gas changes C.the change in internal energy is equal to the mechanical workdone D.all of the above
Last Answer : Answer: D
Description : A unit of pressure used in high vacuum technology, which is equal to 1mmhg. a. specific heat b. isometric c. isobaric d. torr
Last Answer : torr
Description : What type of pressure cannot be used for Boyle’s Law? a. Atmospheric Pressure b. Gauge Pressure c. Surface Pressure d. Isobaric Pressure
Last Answer : Gauge Pressure
Description : _________ is defined as that equivalent to the pressure due to a column of mercury 76cm long. a. surface pressure b. gage pressure c. standard atmospheric pressure d. isobaric pressure
Last Answer : standard atmospheric pressure
Description : What gas thermometer is based on the principle that at low pressure, the temperature of a gas is proportional to its pressure at constant volume? A. Constant-pressure gas thermometer B. Isobaric gas thermometer C. Isometric gas thermometer D. Constant-volume gas thermometer
Last Answer : Constant-volume gas thermometer
Description : In an isothermal process, A. there is no change in temperature B. there is no change in enthalpy C. there is no change in internal energy D. all of these
Description : If the value of n = 0 in the equation pvn = C, then the process is called A. constant volume process B. adiabatic process C. constant pressure process D. isothermal process
Last Answer : Answer: C
Description : Change in enthalpy of a system is the heat supplied at (a) constant pressure (b) constant temperature (c) constant volume (d) constant entropy (e) N.T.P. condition.
Description : The change that the system that undergoes from one equilibrium state to another is known as a. oath b. process c. enthalpy change d. entropy change
Last Answer : process
Description : The propagation of sound waves in a gas involves – (1) Adiabatic compression and rarefaction (2) Isothermal compression and rarefaction (3) Isochoric compression and rarefaction (4) Isobaric compression and rarefaction
Last Answer : (1) Adiabatic compression and rarefaction Explanation: Sound is a mechanical wave that is an oscillation of pressure transmitted through a solid, liquid, or gas, composed of frequencies within the ... . Through solids, however, it can be transmitted as both longitudinal waves and transverse waves.
Last Answer : (1) Adiabatic compression and rarefaction Explanation: Sound is a mechanical wave that is an oscillation of pressure transmitted through a solid, liquid, or gas, composed of frequencies within ... is transmitted through gases, plasma, and liquids as longitudinal waves, also called compression waves.
Description : The propagation of sound waves in a gas involves (1) adiabatic compression and rarefaction (2) isothermal compression and rarefaction (3) isochoric compression and rarefaction (4) isobaric compression and rarefaction
Last Answer : adiabatic compression and rarefaction
Description : During the adiabatic process, which of the following is the change in entropy? a. zero b. greater than zero c. less than zero d. infinity
Last Answer : zero
Description : During adiabatic, internally reversible process, what is true about the change in entropy? A. It is temperature-dependent B. It is always greater than zero C. It is always zero D. It is always less than zero
Last Answer : It is always zero
Description : For reversible adiabatic process, change in entropy is (a) maximum (b) minimum (c) zero (d) unpredictable (e) negative
Description : Steam is throttled to 0.1 MPa with 20 degrees of superheat. (a) What is the quality of throttled steam if its pressure is 0.75 MPa (b) What is the enthalpy of the process? a) 97.6%,2713 kJ/kg b) -97.6%, 2713 kJ/kg c) 87.6%,3713 kJ/kg d) -87.6%, 3713 kJ/kg
Last Answer : 97.6%,2713 kJ/kg
Description : If value of n is infinitely large in a polytropic process pV” = C, then the process is known as constant (a) volume (b) pressure (c) temperature (d) enthalpy (e) entropy