Description : Work done is zero for the following process (a) constant volume (b) free expansion (c) throttling (d) all Of the above (e) none of the above.
Last Answer : Answer : d
Description : A process during which entropy remains constant is called ______ process A. Isometric B. Isochoric C. Isobaric D. Isentropic
Last Answer : Isentropic
Description : What is a process during which the specific volume remains constant? A. Isobaric process B. Isothermal process C. Isochoric or isometric process D. Isovolumetric process
Last Answer : Isochoric or isometric process
Description : What is a process during which the pressure remains constant? A. Isobaric process B. Isothermal process C. Isochoric process D. Isometric process
Last Answer : Isobaric process
Description : What is a process during which the temperature remains constant? A. Isobaric process B. Isothermal process C. Isochoric process D. Isometric process
Last Answer : Isothermal process
Description : According to first law of thermodynamics (a) work done by a system is equal to heat transferred by the system (b) total internal energy of a system during a process remains constant ( ... , enthalpy and entropy during a process remain constant (d) total energy of a system remains constant
Description : An adiabatic process in which there is no change in system enthalpy but for which there is a significant decrease in pressure is called _____. A. Isochoric process B. Isobaric process C. Throttling process D. Quasistatic process
Last Answer : Throttling process
Description : When the expansion of compression of gas takes place without transfer of heat to or from the gas the process is called a. reversible b. adiabatic c. polytropic d. isothermal
Last Answer : adiabatic
Description : When the expansion of compression of gas takes place without transfer of heat or from the gas the process is called; a. Isometric process b. Isothermal process c. Isobaric process d. Adiabatic process
Last Answer : Adiabatic process
Description : During which of the following process does heat rejection takes place in Carnot cycle? A. Isothermal expansion B. Isentropic expansion C. Isothermal compression D. Isentropic compression
Last Answer : Answer: C
Description : No volume changes occur during this type of process a. Isobaric process b. Isomillimetric process c. Isocaloric process d. Isochoric process
Last Answer : Isochoric process
Description : The boiling of water into steam in an open container is an example of a/an _________ process. a. adiabatic b. isochoric c. isobaric d. zero work
Last Answer : isobaric
Description : Which of the following relations is not applicable in a free expansion process? a. Heat is rejected to zero b. Work done is zero c. Change in temperature is zero d. Heat supplied is zero
Last Answer : Change in temperature is zero
Description : In a free expansion process (a) work done is zero (b) heat transfer is zero (c) both (a) and (b) above (d) work done is zero but heat increases (e) work done is zero but heat decreases.
Last Answer : Answer : c
Description : Work done in a free expansion process is (a) + ve (b) -ve (c) zero (d) maximum (e) minimum.
Description : What is a form of mechanical work which is related with the expansion and compression of substances? A. Boundary work B. Thermodynamic work C. Phase work D. System work
Last Answer : Boundary work
Description : What is another term used for isometric processes? a. Isochoric process b. Iolytropic process c. Isothermal process d. Reversible process
Description : Most cooking activities involve _________ process. a. Isochoric b. Isothermal c. Isobaric d. Isovolumic
Last Answer : Isobaric
Description : The free expansion process is a constant enthalpy process. A. Correct B. Incorrect
Last Answer : Answer: A
Description : If a gas vapour is allowed to expand through a very minute aperture, then such a process is known as (a) free expansion (b) hyperbolic expansion (c) adiabatic expansion (d) parabolic expansion (e) throttling.
Last Answer : Answer : e
Description : Change in internal energy in a closed system is equal to heat transferred if the reversible process takes place at constant (a) pressure (b) temperature (c) volume (d) internal energy (e) entropy.
Description : Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant (a) pressure (b) temperature (c) volume (d) internal energy (e) entropy.
Last Answer : Answer : a
Description : When an object undergoes thermal expansion, a. any holes in the object expand as well b. any holes in the object remain the same c. mass increases d. molecular activities would cease
Last Answer : any holes in the object expand as well
Description : A process, in which the temperature of the working substance remains constant during its expansion or compression, is called A. isothermal process B. hyperbolic process C. adiabatic process D. polytropic process
Description : Which of the following processes are thermodynamically reversible (a) throttling (b) free expansion (c) constant volume and constant pressure (d) hyperbolic and pV = C (e) isothermal and adiabatic.
Description : Which of the following parameters is constant for a mole for most of the gases at a given temperature and pressure (a) enthalpy (b) volume (c) mass (d) entropy (e) specific volume.
Last Answer : Answer : b
Description : The free expansion process is __________ non-flow process. A. reversible B. irreversible
Last Answer : Answer: B
Description : Workdone in a free expansion process is A.zero B.minimum C.maximum D.positive
Description : In order that a cycle be reversible, following must be satisfied (a) free expansion or friction resisted expansion/compression process should not be encountered (b) when heat is being absorbed, temperature of hot ... sub-stance should be same (d) all of the above (e) none of the above.
Description : If a fluid expands suddenly into vacuum through an orifice of large dimension, then such a process is called (a) free expansion (b) hyperbolic expansion (c) adiabatic expansion (d) parabolic expansion (e) throttling.
Description : The value of n = 1 in the polytropic process indicates it to be (a) reversible process (b) isothermal process (c) adiabatic process (d) irreversible process (e) free expansion process.
Description : The flow through an open system is _________ if all properties at each point within the system remain constant with respect to time. a. streamline flow b. steady flow c. constant flow d. algebraic flow
Last Answer : steady flow
Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle A. combustion is at constant volume B. expansion and compression are isentropic C. maximum temperature is higher D. heat rejection is lower
Last Answer : Answer: D
Description : During throttling process (a) heat exchange does not take place (b) no work is done by expanding steam (c) there is no change of internal energy of steam (d) all of the above (e) entropy decreases.
Description : An adiabatic process is one in which A.no heat enters or leaves the gas B.the temperature of the gas changes C.the change in internal energy is equal to the mechanical workdone D.all of the above
Description : Which of the following is the correct statement of the second law of thermodynamics? A. It is impossible to construct an engine working on a cyclic process, whose sole purpose is to convert heat energy ... energy, which can be obtained from a given quantity of heat energy. D. all of the above
Description : The door of a running refrigerator inside a room was left open. Which of the following statements is correct? (a) The room will be cooled to the temperature inside the refrigerator. (b) The room ... air in room will remain unaffected. (e) any one of above is possible depending on the capacity.
Description : Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system. A. 8 kJ B. 10 kJ C.12 kJ D.14 kJ Formula: W = p(V2-V1)
Last Answer : 12 kJ
Description : Twenty grams of oxygen gas are compressed at a constant temperature of 30 ˚C to 5%of their original volume. What work is done on the system. A.824 cal B.924 cal C.944 cal D.1124 cal Formula: W = -mRTln (V2/V1) Where R = (1.98 cal/gmole·K) (32 g/gmole)
Last Answer : 1124 cal
Description : What is the equation for the work done by a constant temperature system? A. W = mRTln(V2-V1) B. W = mR( T2-T1 ) ln( V2/V1) C. W = mRTln (V2/V1) D. W = RT ln (V2/V1) Formula : W=∫ pdV lim1,2 ∫ = mRT / V
Last Answer : W = mRTln (V2/V1)
Description : A gas is enclosed in a cylinder with a weighted piston as the top boundary. The gas is heated and expands from a volume of 0.04 m3 to 0.10 m3 at a constant pressure of 200 kPa. Find the work done on the system. a. 5 kJ b. 15 kJ c. 10 kJ d. 12 kJ
Description : It is used for gas turbines which operates on an open cycle where both the compression and expansion processes take place in rotating machinery. a. Dual Cycle b. Otto Cycle c. Carnot Cycle d. Brayton Cycle
Last Answer : Brayton Cycle
Description : A stress which develops within an object when it attempts to expand or contract in response to a temperature changes, but cannot, due to being held rigidly in place. a. elongation b. thermal stress c. expansion contraction d. thermal expansion
Last Answer : thermal stress
Description : If a system after undergoing a series of processes, returns to the initial state then (a) process is thermodynamically in equilibrium (b) process is executed in closed system cycle (c) its entropy will ... sum of heat and work transfer will be zero (e) no work will be done by the system.
Description : If a gas is heated against a pressure, keeping the volume constant, then work done will be equal to (a) + v (b) – ve (c) zero (d) pressure x volume (e) any where between zero and infinity.
Description : A system is in ______ equilibrium of its chemical composition does not change with time, i.e., no chemical reaction occurs. A. Chemical B. Thermal C. Mechanical D. Phase
Last Answer : Chemical
Description : In __________ process, there is an increase in entropy with no degradation of energy. (A) Isothermal expansion (B) Isochoric heat addition (C) Polytropic expansion (D) Isobaric heat addition
Last Answer : (A) Isothermal expansion
Description : Two thick slices of bread, when completely oxidized by the body, can supply 200,000 cal of heat. How much work is this equivalent to? a) 4,190,000 joules b) 8,390,000 joules c) 839, ... d) 419 000 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie
Last Answer : 419 000 joules
Description : How many joules of work is the equivalent of 15000 cal of heat? a) 62850 joules b) 3579.95 joules c) 14995.81 joules d) 15004.19 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie
Last Answer : 62850 joules
Description : Work done in an adiabatic process between a given pair of end states depends on (a) the end states only (b) particular adiabatic process (c) the value of index n (d) the value of heattransferred (e) mass of the system.