The distillation carried out in such a way that the liquid with the lowest boiling point is first evaporated and recondensed, then the liquid with the next higher boiling point is then evaporated and recondensed, and so on until all the available liquid fuels are separately recovered in the sequence of their boiling points. Such a process is called  A. cracking  B. carbonisation  C. fractional distillation  D. full distillation

The distillation carried out in such a way that the liquid with the lowest boiling point is first evaporated and recondensed, then the liquid with the next higher boiling point is then evaporated and recondensed, and so on until all the available liquid fuels are separately recovered in the sequence of their boiling points. Such a process is called  A. cracking  B. carbonisation  C. fractional distillation  D. full distillation
by

1 Answer

Answer :

Answer: C
by

Related questions

Which of the following statement is incorrect?  A. The liquid fuels consist of hydrocarbons.  B. The liquid fuels have higher calorific value than solid fuels.  C. The solid fuels have higher calorific value than liquid fuels.  D. A good fuel should have low ignition point.

Description : Which of the following statement is incorrect?  A. The liquid fuels consist of hydrocarbons.  B. The liquid fuels have higher calorific value than solid fuels.  C. The solid fuels have higher calorific value than liquid fuels.  D. A good fuel should have low ignition point.

Last Answer : Answer: C

Liquid fuels have higher calorific value than solid fuels.  A. Yes  B. No

Description : Liquid fuels have higher calorific value than solid fuels.  A. Yes  B. No

Last Answer : Answer: A

The noble gases have low boiling points because: w) their ionization potentials are very low x) only weak Van der Waals forces hold the atoms together y) they are produced by the fractional distillation of liquid air z) they have eight electrons in the outer shell

Description : The noble gases have low boiling points because: w) their ionization potentials are very low x) only weak Van der Waals forces hold the atoms together y) they are produced by the fractional distillation of liquid air z) they have eight electrons in the outer shell

Last Answer : ANSWER: X -- ONLY WEAK VAN DER WAALS FORCES HOLD THE ATOMS TOGETHER

Fuels that may classified conveniently in solid, liquid and gaseous.  a. Unleaded fuel  b. Diesel fuel  c. Fossil fuel  d. All of the above

Description : Fuels that may classified conveniently in solid, liquid and gaseous.  a. Unleaded fuel  b. Diesel fuel  c. Fossil fuel  d. All of the above

Last Answer : Fossil fuel

Liquid fuels consist of hydrocarbons.  A. True  B. False

Description : Liquid fuels consist of hydrocarbons.  A. True  B. False

Last Answer : Answer: A

Liquid fuels have lower efficiency than solid fuels.  A. True  B. False

Description : Liquid fuels have lower efficiency than solid fuels.  A. True  B. False

Last Answer : Answer: B

All the commercial liquid fuels are derived from natural petroleum (or crude oil).  A.True  B. False

Description : All the commercial liquid fuels are derived from natural petroleum (or crude oil).  A.True  B. False

Last Answer : Answer: A

When coal is strongly heated continuously for 42 to 48 hours in the absence of air in a closed vessel, the process is known as __________ of fuel.  A. atomisation  B. carbonisation

Description : When coal is strongly heated continuously for 42 to 48 hours in the absence of air in a closed vessel, the process is known as __________ of fuel.  A. atomisation  B. carbonisation

Last Answer : Answer: B

What refers to the state at which liquid and gaseous phases are indistinguishable?  a. Triple point  b. Critical point  c. Boiling point  d. Pour point

Description : What refers to the state at which liquid and gaseous phases are indistinguishable?  a. Triple point  b. Critical point  c. Boiling point  d. Pour point

Last Answer : Critical point

What is the unique state at which solid, liquid and gaseous phase can go co-exist in equilibrium?  a. Triple point  b. Critical point  c. Boiling point  d. Pour point

Description : What is the unique state at which solid, liquid and gaseous phase can go co-exist in equilibrium?  a. Triple point  b. Critical point  c. Boiling point  d. Pour point

Last Answer : Triple point

__________________ represents the highest pressure and highest temperature at which liquid and vapor can coexist in equilibrium.  a) Critical Point  b) Boiling Point  c) Quality Point  d) None of the above

Description : __________________ represents the highest pressure and highest temperature at which liquid and vapor can coexist in equilibrium.  a) Critical Point  b) Boiling Point  c) Quality Point  d) None of the above

Last Answer : Critical Point

__________________ is a liquid at the saturations which has temperature equal to the boiling point corresponding to the existing pressure.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Description : __________________ is a liquid at the saturations which has temperature equal to the boiling point corresponding to the existing pressure.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Last Answer : Saturated Liquid

What is the amount of heat needed to turn 1kg of the substance at its boiling point from the liquid to the gaseous state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Description : What is the amount of heat needed to turn 1kg of the substance at its boiling point from the liquid to the gaseous state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Last Answer : Heat of vaporation

Two liquids (A)and(B)are separated by fractional distillation, the boiling point of (A) is less than (B).which liquid comes out first in distillate? Explain.

Description : Two liquids (A)and(B)are separated by fractional distillation, the boiling point of (A) is less than (B).which liquid comes out first in distillate? Explain.

Last Answer : The liquid (a) comes out first in distillate. On boiling the vapours of lower boiling component are formed first.

Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Description : Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Last Answer : Answer: A

Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Description : Producer gas is obtained by  A. partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast  B. carbonisation of bituminous coal  C. passing steam over incandescent coke  D. passing air and a large amount of steam over waste coal at about 650°C

Last Answer : Answer: A

Carbonisation of coal consists of  A. drying and crushing the coal to a fine powder  B. moulding the finely ground coal under pressure with or without a binding material  C. heating the wood with a limited supply of air to temperature not less than 280°C  D. none of the above

Description : Carbonisation of coal consists of  A. drying and crushing the coal to a fine powder  B. moulding the finely ground coal under pressure with or without a binding material  C. heating the wood with a limited supply of air to temperature not less than 280°C  D. none of the above

Last Answer : Answer: D

In thermodynamics, a throttling process, also called a _________, is a type of isenthalpic process where a liquid or gas is cooled as it passes from a higher pressure state to a lower pressure state.  a. Rankine Process  b. Carnot Cycle  c. Joule-Thomson process  d. Refrigeration process

Description : In thermodynamics, a throttling process, also called a _________, is a type of isenthalpic process where a liquid or gas is cooled as it passes from a higher pressure state to a lower pressure state.  a. Rankine Process  b. Carnot Cycle  c. Joule-Thomson process  d. Refrigeration process

Last Answer : Joule-Thomson process

The temperature at which the vapor pressure exactly equals one atm is called _________.  a. boiling temperature  b. normal boiling point  c. triple point  d. point of infliction

Description : The temperature at which the vapor pressure exactly equals one atm is called _________.  a. boiling temperature  b. normal boiling point  c. triple point  d. point of infliction

Last Answer : normal boiling point

In the process of radiation, energy is carried by electromagnetic waves. What is the speed of electromagnetic waves?  A. 182,000 miles/second  B. 184,000 miles/second  C. 186,000 miles/second  D. 188,000 miles/second

Description : In the process of radiation, energy is carried by electromagnetic waves. What is the speed of electromagnetic waves?  A. 182,000 miles/second  B. 184,000 miles/second  C. 186,000 miles/second  D. 188,000 miles/second

Last Answer : 186,000 miles/second

The boiling of water into steam in an open container is an example of a/an _________ process.  a. adiabatic  b. isochoric  c. isobaric  d. zero work

Description : The boiling of water into steam in an open container is an example of a/an _________ process.  a. adiabatic  b. isochoric  c. isobaric  d. zero work

Last Answer : isobaric

Water vapor at 100 KPa and 150°C is compressed isothermally until half the vapor has condensed. How much work must be performed on the steam in this compression process per kilogram?  a) -1384.7 kJ  b) 1384.7 kJ  c) -2384.7 kJ  d) 2384.7 kJ

Description : Water vapor at 100 KPa and 150°C is compressed isothermally until half the vapor has condensed. How much work must be performed on the steam in this compression process per kilogram?  a) -1384.7 kJ  b) 1384.7 kJ  c) -2384.7 kJ  d) 2384.7 kJ

Last Answer : -1384.7 kJ

_________________ is one which has a pressure higher than the saturation pressure corresponding to the existing temperature.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Description : _________________ is one which has a pressure higher than the saturation pressure corresponding to the existing temperature.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Last Answer : Compressed Liquid

If a fluid expands suddenly into vacuum through an orifice of large dimension, then such a process is called  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Description : If a fluid expands suddenly into vacuum through an orifice of large dimension, then such a process is called  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Last Answer : Answer : a

If a gas vapour is allowed to expand through a very minute aperture, then such a process is known as  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Description : If a gas vapour is allowed to expand through a very minute aperture, then such a process is known as  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Last Answer : Answer : e

Coke is obtained from coal by (a) Distillation (b) Fractional distillation (c) Destructive distillation (d) Cracking

Description : Coke is obtained from coal by (a) Distillation (b) Fractional distillation (c) Destructive distillation (d) Cracking

Last Answer : Ans:(c)

Occurs when the vapor pressure equals the atmospheric pressure  a. Boiling  b. Melting  c. Freezing  d. Vaporizing

Description : Occurs when the vapor pressure equals the atmospheric pressure  a. Boiling  b. Melting  c. Freezing  d. Vaporizing

Last Answer : Boiling

Boiling temperature of a material is dependent on its _________.  a. volume  b. power  c. heat  d. pressure

Description : Boiling temperature of a material is dependent on its _________.  a. volume  b. power  c. heat  d. pressure

Last Answer : pressure

A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added.  a) 1378.7 kJ  b) 1348.5 kJ  c) 1278,7 kJ  d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)

Description : A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added.  a) 1378.7 kJ  b) 1348.5 kJ  c) 1278,7 kJ  d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)

Last Answer : 1378.7 kJ

An ideal gas of volume 1liter and pressure 10 bar undergoes a quasistatic adiabatic expansion until the pressure drops to 1 bar. Assume γ to be 1.4 what is the final volume?  a. 3.18 l  b. 4.18 l  c. 5.18 l  d. 6.18 l

Description : An ideal gas of volume 1liter and pressure 10 bar undergoes a quasistatic adiabatic expansion until the pressure drops to 1 bar. Assume γ to be 1.4 what is the final volume?  a. 3.18 l  b. 4.18 l  c. 5.18 l  d. 6.18 l

Last Answer : 5.18 l

What refers to the point at which the saturated liquid and saturated vapor states are the same or identical?  A. Triple point  B. Inflection point  C. Maximum point  D. Critical point

Description : What refers to the point at which the saturated liquid and saturated vapor states are the same or identical?  A. Triple point  B. Inflection point  C. Maximum point  D. Critical point

Last Answer : Maximum point

What is the amount of heat needed to turn 1 kg of the substance at its melting point from the solid to liquid state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Description : What is the amount of heat needed to turn 1 kg of the substance at its melting point from the solid to liquid state?  A. Heat of fusion  B. Heat of vaporation  C. Heat of condensation  D. Heat of fission

Last Answer : Heat of fusion

A convection process in which an external device, such as a fan, is used to produce the fluid flow.  a. Forced Convection  b. External Convection  c. Placid Convection  d. Thermionic Convection

Description : A convection process in which an external device, such as a fan, is used to produce the fluid flow.  a. Forced Convection  b. External Convection  c. Placid Convection  d. Thermionic Convection

Last Answer : Forced Convection

For a thermodynamic process to be reversible, the temperature difference between hot body and working substance should be  (a) zero  (b) minimum  (d) maximum  (d) infinity  (e) there is no such criterion.

Description : For a thermodynamic process to be reversible, the temperature difference between hot body and working substance should be  (a) zero  (b) minimum  (d) maximum  (d) infinity  (e) there is no such criterion.

Last Answer : Answer : a

The more effective way of increasing efficiency of Carnot engine is to  (a) increase higher temperature  (b) decrease higher temperature  (c) increase lower temperature  (d) decrease lower temperature  (e) keep lower temperature constant.

Description : The more effective way of increasing efficiency of Carnot engine is to  (a) increase higher temperature  (b) decrease higher temperature  (c) increase lower temperature  (d) decrease lower temperature  (e) keep lower temperature constant.

Last Answer : Answer : d

The actual temperature drop across the heating surface of an evaporator depends on the (A) Liquid depth over the heating surface (B) Solution being evaporated (C) Pressure difference between the steam chest and the vapor space above the boiling liquid (D) All (A), (B) and (C)

Description : The actual temperature drop across the heating surface of an evaporator depends on the (A) Liquid depth over the heating surface (B) Solution being evaporated (C) Pressure difference between the steam chest and the vapor space above the boiling liquid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The energy that flows from higher temperature object to a lower temperature object because of the difference in temperature is called  a. heat  b. temperature  c. thermodynamics cycle  d. energy flow

Description : The energy that flows from higher temperature object to a lower temperature object because of the difference in temperature is called  a. heat  b. temperature  c. thermodynamics cycle  d. energy flow

Last Answer : heat

If the value of n = 0 in the equation pvn = C, then the process is called  A. constant volume process  B. adiabatic process  C. constant pressure process  D. isothermal process

Description : If the value of n = 0 in the equation pvn = C, then the process is called  A. constant volume process  B. adiabatic process  C. constant pressure process  D. isothermal process

Last Answer : Answer: C

__________________ is a vapor having a temperature higher than the saturation temperature corresponding to the existing pressure.  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Description : __________________ is a vapor having a temperature higher than the saturation temperature corresponding to the existing pressure.  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Last Answer : Superheated Vapor

What statement of the second law of thermodynamics states that it is impossible to build a device that operates in a cycle and produces no effect other than the transfer of heat from a lower-temperature body to a higher-temperature body?  A. Kelvin-Planck statement  B. Clausius statement  C. Kelvin statement  D. Rankine statement

Description : What statement of the second law of thermodynamics states that it is impossible to build a device that operates in a cycle and produces no effect other than the transfer of heat from a lower- ... A. Kelvin-Planck statement  B. Clausius statement  C. Kelvin statement  D. Rankine statement

Last Answer : Clausius statement

Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Last Answer : Answer: D

The changing of solid directly to vapor without passing through liquid state is called  a. Evaporation  b. Vaporization  c. Sublimation  d. Condensation

Description : The changing of solid directly to vapor without passing through liquid state is called  a. Evaporation  b. Vaporization  c. Sublimation  d. Condensation

Last Answer : Sublimation

A liquid that is about to vaporize is called ______ liquid.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Description : A liquid that is about to vaporize is called ______ liquid.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Last Answer : Saturated

In an isothermal process, the internal energy  (a) increases  (b) decreases  (c) remains constant  (d) first increases and then decreases  (e) first decreases and then increases.

Description : In an isothermal process, the internal energy  (a) increases  (b) decreases  (c) remains constant  (d) first increases and then decreases  (e) first decreases and then increases.

Last Answer : Answer : c

Is a steady flow process at total constant pressure through a control volume for which there is no heat?  a. Adiabatic Saturation Process  b. Dew point  c. Adiabatic Ratio  d. None of the above

Description : Is a steady flow process at total constant pressure through a control volume for which there is no heat?  a. Adiabatic Saturation Process  b. Dew point  c. Adiabatic Ratio  d. None of the above

Last Answer : Adiabatic Saturation Process

A _________ is a quantity whose value depends on the path followed during a particular change in state.  a. path function  b. point function  c. process  d. cycle

Description : A _________ is a quantity whose value depends on the path followed during a particular change in state.  a. path function  b. point function  c. process  d. cycle

Last Answer : path function

A _________ is a quantity whose value at any state is independent of the path or process used to reach that state.  a. cycle  b. path function  c. point function  d. process

Description : A _________ is a quantity whose value at any state is independent of the path or process used to reach that state.  a. cycle  b. path function  c. point function  d. process

Last Answer : point function

If a system after undergoing a series of processes, returns to the initial state then  (a) process is thermodynamically in equilibrium  (b) process is executed in closed system cycle  (c) its entropy will change due to irreversibility  (d) sum of heat and work transfer will be zero  (e) no work will be done by the system.

Description : If a system after undergoing a series of processes, returns to the initial state then  (a) process is thermodynamically in equilibrium  (b) process is executed in closed system cycle  (c) its entropy will ... sum of heat and work transfer will be zero  (e) no work will be done by the system.

Last Answer : Answer : d

If value of n is infinitely large in a polytropic process pV” = C, then the process is known as constant  (a) volume  (b) pressure  (c) temperature  (d) enthalpy  (e) entropy

Description : If value of n is infinitely large in a polytropic process pV” = C, then the process is known as constant  (a) volume  (b) pressure  (c) temperature  (d) enthalpy  (e) entropy

Last Answer : Answer : a