Water tube boilers are those in which a) Flue gases pass through tubes and water around it b) Water passes through the tubes and flue gases around it c) Work is done during adiabatic expansion d) Change is enthalpy

Water tube boilers are those in which
a) Flue gases pass through tubes and water around it
b) Water passes through the tubes and flue gases around it
c) Work is done during adiabatic expansion
d) Change is enthalpy
by

1 Answer

Answer :

b) Water passes through the tubes and flue gases around it
by

Related questions

Fire tube boilers are those in which a) Flue gases pass through tubes and water around it b) Water passes through the tubes and flue gases around it c) Work is done during adiabatic expansion d) Change is enthalpy

Description : Fire tube boilers are those in which a) Flue gases pass through tubes and water around it b) Water passes through the tubes and flue gases around it c) Work is done during adiabatic expansion d) Change is enthalpy

Last Answer : a) Flue gases pass through tubes and water around it

The economiser is used in boilers to........ A]Increase thermal efficiency of boiler B]Economise on fuel C]Extract heat from the exhaust the gases D]Increase flue gas temperature

Description : The economiser is used in boilers to........ A]Increase thermal efficiency of boiler B]Economise on fuel C]Extract heat from the exhaust the gases D]Increase flue gas temperature

Last Answer : A]Increase thermal efficiency of boiler

Water-tube boiler is the one, in which (A) Water passes through tubes and flue gases around it (B) Tube carrying hot flue gases are immersed in a pool of water (C) Tubes are placed in vertical position (D) None of these

Description : Water-tube boiler is the one, in which (A) Water passes through tubes and flue gases around it (B) Tube carrying hot flue gases are immersed in a pool of water (C) Tubes are placed in vertical position (D) None of these

Last Answer : Option A

Water-tube boiler is the one, in which (A) Water passes through tubes and flue gases around it (B) Tube carrying hot flue gases are immersed in a pool of water (C) Tubes are placed in vertical position (D) None of these

Description : Water-tube boiler is the one, in which (A) Water passes through tubes and flue gases around it (B) Tube carrying hot flue gases are immersed in a pool of water (C) Tubes are placed in vertical position (D) None of these

Last Answer : Option A

The diameter of internal flue tubes of a Lancashire boiler is about _______ that of it’s shell a. One fourth b. One third c. Two fifth d. One half

Description : The diameter of internal flue tubes of a Lancashire boiler is about _______ that of it’s shell a. One fourth b. One third c. Two fifth d. One half

Last Answer : c. Two fifth

Water tube boilers produces steam at a________ pressure than that of fire tube boilers. a) Higher b) Lower c) Same d) None of the above

Description : Water tube boilers produces steam at a________ pressure than that of fire tube boilers. a) Higher b) Lower c) Same d) None of the above

Last Answer : a) Higher

Which of these is an output of a ‘Furnace’? a. Fuel gas b. Cool Air c. Flue gases d. Water Vapor

Description : Which of these is an output of a ‘Furnace’? a. Fuel gas b. Cool Air c. Flue gases d. Water Vapor

Last Answer : c. Flue gases

Find false statement about effect of sulphur in fuel? (A) It has heating value (B) It helps in electrostatic precipitation of ash in flue gases (C) It leads to corrosion of air heaters, ducting, etc. if flue gas exit temperature is low (D) It erodes furnace walls

Description : Find false statement about effect of sulphur in fuel? (A) It has heating value (B) It helps in electrostatic precipitation of ash in flue gases (C) It leads to corrosion of air heaters, ducting, etc. if flue gas exit temperature is low (D) It erodes furnace walls

Last Answer : (D) It erodes furnace walls

What is the function of boiler? • To burn the fuel in a confined closed system With the supply of air • To generate steam in varying pressure • To generate steam at constant pressure • To produce flue gases by burning fuel at a given pressure

Description : What is the function of boiler? • To burn the fuel in a confined closed system With the supply of air • To generate steam in varying pressure • To generate steam at constant pressure • To produce flue gases by burning fuel at a given pressure

Last Answer : • To generate steam at constant pressure

The biggest loss in the boiler is a) Moisture in fuel b) Dry flue gases c) Steam formation d) Unburnt carbon

Description : The biggest loss in the boiler is a) Moisture in fuel b) Dry flue gases c) Steam formation d) Unburnt carbon

Last Answer : b) Dry flue gases

The product of efficiency & heat transferred to the working fluid is? a. Net temperature change b. Net work done c. Net enthalpy change d. None of the mentioned

Description : The product of efficiency & heat transferred to the working fluid is? a. Net temperature change b. Net work done c. Net enthalpy change d. None of the mentioned

Last Answer : b. Net work done

A safety valve usually employed with stationary boilers is (A) Lever safety valve (B) Dead weight safety valve (C) High steam and low water safety valve (D) All of these

Description : A safety valve usually employed with stationary boilers is (A) Lever safety valve (B) Dead weight safety valve (C) High steam and low water safety valve (D) All of these

Last Answer : (D) All of these

Through what is feed water from hot-well is passed through, before entering steam and water drum in Lamont boiler? a. Evaporator tubes b. Economizer c. Distributor header d. Circulating pump

Description : Through what is feed water from hot-well is passed through, before entering steam and water drum in Lamont boiler? a. Evaporator tubes b. Economizer c. Distributor header d. Circulating pump

Last Answer : b. Economizer

In what is water in high pressure boiler circulated through? • Conduits • Cove • Channel • Tubes

Description : In what is water in high pressure boiler circulated through? • Conduits • Cove • Channel • Tubes

Last Answer : • Tubes

Boilers are used in places like 1. Domestic heating 2. Commercial heating 3. Industrial heating application 4. All of above

Description : Boilers are used in places like 1. Domestic heating 2. Commercial heating 3. Industrial heating application 4. All of above

Last Answer : 4. All of above

High pressure boilers operate at 1. Lower than 15 psig 2. Higher than 15 psig 3. 15 psig 4. None of above

Description : High pressure boilers operate at 1. Lower than 15 psig 2. Higher than 15 psig 3. 15 psig 4. None of above

Last Answer : 2. Higher than 15 psig

Use of ______ is prohibited in process boilers. a. Use of a common gas b. combustion air control linkage c. jack shaft d. All of the above

Description : Use of ______ is prohibited in process boilers. a. Use of a common gas b. combustion air control linkage c. jack shaft d. All of the above

Last Answer : d. All of the above

For process boilers , combustion air fans must meet the following requirements ___ a. The fan motor shall be driven by a variable speed drive b. The fan motor shall include controls that limit the fan motor demand to no more than 30 %. c. Both a. & b. d. None of the above

Description : For process boilers , combustion air fans must meet the following requirements ___ a. The fan motor shall be driven by a variable speed drive b. The fan motor shall include controls that limit the fan motor demand to no more than 30 %. c. Both a. & b. d. None of the above

Last Answer : c. Both a. & b.

Process boilers with capacity of 2.5 MMBtu/h and above are also referred as _ a. Natural draft boilers b. Atmospheric boilers c. Both a. And b. d. None of the above

Description : Process boilers with capacity of 2.5 MMBtu/h and above are also referred as _ a. Natural draft boilers b. Atmospheric boilers c. Both a. And b. d. None of the above

Last Answer : a. Natural draft boilers

Combustion air positive shut-off shall be provided on all newly installed _______ a. Grant boilers b. Process boilers c. Worcester boilers d. All of the above

Description : Combustion air positive shut-off shall be provided on all newly installed _______ a. Grant boilers b. Process boilers c. Worcester boilers d. All of the above

Last Answer : b. Process boilers

Industrial boilers are closed vessels that use a fuel source or electricity to generate ________for industrial purposes. • Fuel Food • Steam

Description : Industrial boilers are closed vessels that use a fuel source or electricity to generate ________for industrial purposes. • Fuel Food • Steam

Last Answer : • Steam

Steam Boilers is used in _________industries • Heating Requirement for Facility. • Steam for Batching. • Steam for Processing. • All of the above

Description : Steam Boilers is used in _________industries • Heating Requirement for Facility. • Steam for Batching. • Steam for Processing. • All of the above

Last Answer : • All of the above

Where are steam boilers used in the industries a) heating requirement for facility b) steam for batching c) steam for processing d) all of the above

Description : Where are steam boilers used in the industries a) heating requirement for facility b) steam for batching c) steam for processing d) all of the above

Last Answer : d) all of the above

The draught in locomotive boilers is produced by a ___________ a) Chimney b) Centrifugal fan c) Steam jet d) All of the above

Description : The draught in locomotive boilers is produced by a ___________ a) Chimney b) Centrifugal fan c) Steam jet d) All of the above

Last Answer : c) Steam jet

Oxygen trim control strategy __ a. continuously measures the oxygen content in the flue gas b. adjusts the combustion air flow c. Continually tuning the air-fuel mixture. d. All of above

Description : Oxygen trim control strategy __ a. continuously measures the oxygen content in the flue gas b. adjusts the combustion air flow c. Continually tuning the air-fuel mixture. d. All of above

Last Answer : d. All of above

A flue damper and a vent damper are two examples of _______ a. Combustion air positive shut off devices b. Combustion air negative shut off devices c. Both a. & b. d. None of the above

Description : A flue damper and a vent damper are two examples of _______ a. Combustion air positive shut off devices b. Combustion air negative shut off devices c. Both a. & b. d. None of the above

Last Answer : a. Combustion air positive shut off devices

Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Description : Limestone powder is injected during pulverised coal burning in boilers to __________ the flue gases. (A) Reduce SO2 content in (B) Catalytically convert SO2 to SO3 in (C) Increase the dew point of (D) None of these

Last Answer : (A) Reduce SO2 content in

Adiabatic process is (A) Essentially an isentropic process is___________ (B) Non-heat transfer process (C) Reversible process (D) Constant temperature process

Description : Adiabatic process is (A) Essentially an isentropic process is___________ (B) Non-heat transfer process (C) Reversible process (D) Constant temperature process

Last Answer : (B) Non-heat transfer process

What is the reason to service a cooling tower? a) to ensure proper air flow b) to clean the tubes c) to inspect the water pump d) all of these

Description : What is the reason to service a cooling tower? a) to ensure proper air flow b) to clean the tubes c) to inspect the water pump d) all of these

Last Answer : all of these

The water tubes in a simple vertical boiler are _______ a. Horizontal b. Vertical c. Inclined d. All of the above

Description : The water tubes in a simple vertical boiler are _______ a. Horizontal b. Vertical c. Inclined d. All of the above

Last Answer : c. Inclined

The isentropic enthalpy drop in moving blade is two-third of the isentropic enthalpy drop in fixed blades of a turbine. The degree of reaction will be (A) 0.4 (B) 0.56 (C) 0.67 (D) 1.67

Description : The isentropic enthalpy drop in moving blade is two-third of the isentropic enthalpy drop in fixed blades of a turbine. The degree of reaction will be (A) 0.4 (B) 0.56 (C) 0.67 (D) 1.67

Last Answer : (A) 0.4

The diameter of fine tubes in Cochran boiler is of order of _______ a. 2cm b. 6cm c. 8cm d. 15cm

Description : The diameter of fine tubes in Cochran boiler is of order of _______ a. 2cm b. 6cm c. 8cm d. 15cm

Last Answer : b. 6cm

Locomotive boiler has a) 137 fire tubes and 44 superheated tubes b) 147 fire tubes and 34 superheated tubes c) 157 fire tubes and 24 superheated tubes d) 167 fire tubes and 14 superheated tubes

Description : Locomotive boiler has a) 137 fire tubes and 44 superheated tubes b) 147 fire tubes and 34 superheated tubes c) 157 fire tubes and 24 superheated tubes d) 167 fire tubes and 14 superheated tubes

Last Answer : c) 157 fire tubes and 24 superheated tubes

Size of boiler tubes is specified by a) Mean diameter and thickness b) Inside diameter and thickness c) Outside diameter and thickness d) Outside diameter and inside diameter

Description : Size of boiler tubes is specified by a) Mean diameter and thickness b) Inside diameter and thickness c) Outside diameter and thickness d) Outside diameter and inside diameter

Last Answer : c) Outside diameter and thickness

6. Liquefaction of gases cannot be done by (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Merely compressing it beyond critical pressure (D) Adiabatic expansion against a piston or in a turbine

Description : 6. Liquefaction of gases cannot be done by (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Merely compressing it beyond critical pressure (D) Adiabatic expansion against a piston or in a turbine

Last Answer : (C) Merely compressing it beyond critical pressure

A __________ is a type of heat exchange system where water is heated to its' boiling point via combustion of a fuel blown through a tube submerged in water. a. Condensate loop b. Hyperbolic cooling tower c. Steam boiler d. All of above

Description : A __________ is a type of heat exchange system where water is heated to its' boiling point via combustion of a fuel blown through a tube submerged in water. a. Condensate loop b. Hyperbolic cooling tower c. Steam boiler d. All of above

Last Answer : c. Steam boiler

Condensate is the liquid formed when steam passes from the ________ to the ______ state. a. Vapor, solid b. Solid, liquid c. Vapor, liquid d. None

Description : Condensate is the liquid formed when steam passes from the ________ to the ______ state. a. Vapor, solid b. Solid, liquid c. Vapor, liquid d. None

Last Answer : c. Vapor, liquid

Boiler is a enclosed vessel that provides a) Expansion b) Ignition c) Combustion d) None of the above

Description : Boiler is a enclosed vessel that provides a) Expansion b) Ignition c) Combustion d) None of the above

Last Answer : c) Combustion

On mollier chart ,free expansion or throttling process from High pressure to atmosphere is represented by • Horizontal straight line • Vertical straight line • Straight inclined line • Curved line

Description : On mollier chart ,free expansion or throttling process from High pressure to atmosphere is represented by • Horizontal straight line • Vertical straight line • Straight inclined line • Curved line

Last Answer : • Horizontal straight line

It is easy to detect and monitor excess air a. As oxygen not used for combustion is heated and discharged with the exhaust gases. b. Oxygen is discharged without heating c. Both a. & b. d. None of above

Description : It is easy to detect and monitor excess air a. As oxygen not used for combustion is heated and discharged with the exhaust gases. b. Oxygen is discharged without heating c. Both a. & b. d. None of above

Last Answer : a. As oxygen not used for combustion is heated and discharged with the exhaust gases.

Which of the following is not a type of boiler? • Fire tube boiler • Water tube boiler • Cast iron boiler • Hot water boiler

Description : Which of the following is not a type of boiler? • Fire tube boiler • Water tube boiler • Cast iron boiler • Hot water boiler

Last Answer : • Hot water boiler

Cornish boiler is an example of which types of boiler? • Fire tube boiler • Water tube boiler • Vertical tube boiler • Extremally fired boiler

Description : Cornish boiler is an example of which types of boiler? • Fire tube boiler • Water tube boiler • Vertical tube boiler • Extremally fired boiler

Last Answer : • Fire tube boiler

Which of the following is a water tube boiler........ A]Locomotive boiler B]Lancashire boiler C]Cornish boiler D]Babcock and wilcox boiler

Description : Which of the following is a water tube boiler........ A]Locomotive boiler B]Lancashire boiler C]Cornish boiler D]Babcock and wilcox boiler

Last Answer : in a Truss structure and nature of reactive force is in the nature of

Cochran boiler is a a) Horizontal fire tube boiler b) Horizontal water tube boiler c) Vertical water tube type d) Vertical fire tube type

Description : Cochran boiler is a a) Horizontal fire tube boiler b) Horizontal water tube boiler c) Vertical water tube type d) Vertical fire tube type

Last Answer : d) Vertical fire tube type

What type of steam is generated by evaporator tube of Lamont boiler ? a. Saturated steam b. Unsaturated steam c. Superheated steam d. Flash steam

Description : What type of steam is generated by evaporator tube of Lamont boiler ? a. Saturated steam b. Unsaturated steam c. Superheated steam d. Flash steam

Last Answer : a. Saturated steam

In what form are the boiler tube arrange in Lamont boiler ? a. Parallel in vertical b. Inclined vertically c. Parallel in horizontal d. Horizontally inclined

Description : In what form are the boiler tube arrange in Lamont boiler ? a. Parallel in vertical b. Inclined vertically c. Parallel in horizontal d. Horizontally inclined

Last Answer : c. Parallel in horizontal

The adiabatic throttling process of a perfect gas is one of constant enthalpy (A) In which there is a temperature drop (B) Which is exemplified by a non-steady flow expansion (C) Which can be performed in a pipe with a constriction (D) In which there is an increase in temperature

Description : The adiabatic throttling process of a perfect gas is one of constant enthalpy (A) In which there is a temperature drop (B) Which is exemplified by a non-steady flow expansion (C) Which can be performed in a pipe with a constriction (D) In which there is an increase in temperature

Last Answer : (C) Which can be performed in a pipe with a constriction

To reduce the stack loss, heat recovery from flue gas can be done by (A) Preheating of cold stock (B) Preheating of combustion air (C) Steam generation in waste heat boilers (D) All (A), (B) and (C)

Description : To reduce the stack loss, heat recovery from flue gas can be done by (A) Preheating of cold stock (B) Preheating of combustion air (C) Steam generation in waste heat boilers (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

During Joule-Thomson expansion of gases (A) Enthalpy remains constant (B) Entropy remains constant (C) Temperature remains constant (D) None of these

Description : During Joule-Thomson expansion of gases (A) Enthalpy remains constant (B) Entropy remains constant (C) Temperature remains constant (D) None of these

Last Answer : (A) Enthalpy remains constant

In a gas-liquid shell and tube heat exchanger, the(A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure gases are corrosive in nature (C) Gases to be heated/cooled is normally routed through the shell side, because the corrosion caused by the cooling water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Description : In a gas-liquid shell and tube heat exchanger, the (A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure ... water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'