The adiabatic throttling process of a perfect gas is one of constant enthalpy (A) In which there is a temperature drop (B) Which is exemplified by a non-steady flow expansion (C) Which can be performed in a pipe with a constriction (D) In which there is an increase in temperature

The adiabatic throttling process of a perfect gas is one of constant enthalpy
(A) In which there is a temperature drop
(B) Which is exemplified by a non-steady flow expansion
(C) Which can be performed in a pipe with a constriction
(D) In which there is an increase in temperature
by

1 Answer

Answer :

(C) Which can be performed in a pipe with a constriction
by

Related questions

__________ decreases during adiabatic throttling of a perfect gas. (A) Entropy (B) Temperature (C) Enthalpy (D) Pressure

Description : __________ decreases during adiabatic throttling of a perfect gas. (A) Entropy (B) Temperature (C) Enthalpy (D) Pressure

Last Answer : (D) Pressure

Steady non-uniform flow is exemplified by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate

Description : Steady non-uniform flow is exemplified by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at increasing rate (D) Expanding tube at constant rate

Last Answer : (D) Expanding tube at constant rate

If a gas vapour is allowed to expand through a very minute aperture, then such a process is known as  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Description : If a gas vapour is allowed to expand through a very minute aperture, then such a process is known as  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Last Answer : Answer : e

The fluid velocity varies as the square of the cylindrical pipe diameter, in case of steady state laminar flow at constant pressure drop, for __________ fluid. (A) Newtonian (B) Dilatant (C) Pseudo-plastic (D) Non-Newtonian

Description : The fluid velocity varies as the square of the cylindrical pipe diameter, in case of steady state laminar flow at constant pressure drop, for __________ fluid. (A) Newtonian (B) Dilatant (C) Pseudo-plastic (D) Non-Newtonian

Last Answer : (A) Newtonian

Which of the following processes are thermodynamically reversible  (a) throttling  (b) free expansion  (c) constant volume and constant pressure  (d) hyperbolic and pV = C  (e) isothermal and adiabatic.

Description : Which of the following processes are thermodynamically reversible  (a) throttling  (b) free expansion  (c) constant volume and constant pressure  (d) hyperbolic and pV = C  (e) isothermal and adiabatic.

Last Answer : Answer : e

An adiabatic process in which there is no change in system enthalpy but for which there is a significant decrease in pressure is called _____.  A. Isochoric process  B. Isobaric process  C. Throttling process  D. Quasistatic process

Description : An adiabatic process in which there is no change in system enthalpy but for which there is a significant decrease in pressure is called _____.  A. Isochoric process  B. Isobaric process  C. Throttling process  D. Quasistatic process

Last Answer : Throttling process

Joule-Thomson effect i.e., a throttling process is a constant __________ process. (A) Entropy (B) Temperature (C) Internal energy (D) Enthalpy

Description : Joule-Thomson effect i.e., a throttling process is a constant __________ process. (A) Entropy (B) Temperature (C) Internal energy (D) Enthalpy

Last Answer : (D) Enthalpy

If a fluid expands suddenly into vacuum through an orifice of large dimension, then such a process is called  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Description : If a fluid expands suddenly into vacuum through an orifice of large dimension, then such a process is called  (a) free expansion  (b) hyperbolic expansion  (c) adiabatic expansion  (d) parabolic expansion  (e) throttling.

Last Answer : Answer : a

The thermodynamic law, PVy = constant, is not applicable in case of (A) Ideal compression of air (B) Free expansion of an ideal gas (C) Adiabatic expansion of steam in a turbine (D) Adiabatic compression of a perfect gas

Description : The thermodynamic law, PVy = constant, is not applicable in case of (A) Ideal compression of air (B) Free expansion of an ideal gas (C) Adiabatic expansion of steam in a turbine (D) Adiabatic compression of a perfect gas

Last Answer : (B) Free expansion of an ideal gas

The fluid velocity varies as the cube of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop for __________ fluid. (A) Newtonian (B) Pseudo-plastic (C) Dilatent (D) Bingham plastic

Description : The fluid velocity varies as the cube of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop for __________ fluid. (A) Newtonian (B) Pseudo-plastic (C) Dilatent (D) Bingham plastic

Last Answer : (B) Pseudo-plastic

The fluid velocity varies as the square root of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop of __________ fluid. (A) Dilatent (B) Pseudo-plastic (C) Bingham plastic (D) Newtonian

Description : The fluid velocity varies as the square root of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop of __________ fluid. (A) Dilatent (B) Pseudo-plastic (C) Bingham plastic (D) Newtonian

Last Answer : (A) Dilatent

Claude gas liquefaction process employs cooling (A) At constant pressure (B) By throttling (C) By expansion in an engine (D) None of these

Description : Claude gas liquefaction process employs cooling (A) At constant pressure (B) By throttling (C) By expansion in an engine (D) None of these

Last Answer : (C) By expansion in an engine

Linde gas liquefaction process employs cooling (A) By throttling (B) By expansion in an engine (C) At constant pressure (D) None of these

Description : Linde gas liquefaction process employs cooling (A) By throttling (B) By expansion in an engine (C) At constant pressure (D) None of these

Last Answer : (A) By throttling

Throttling (Joule-Thomson effect) process is a constant __________ process. (A) Enthalpy (B) Entropy (C) Pressure (D) None of these

Description : Throttling (Joule-Thomson effect) process is a constant __________ process. (A) Enthalpy (B) Entropy (C) Pressure (D) None of these

Last Answer : (A) Enthalpy

Throttling process is a/an __________ process. (A) Reversible and isothermal (B) Irreversible and constant enthalpy (C) Reversible and constant entropy (D) Reversible and constant enthalpy

Description : Throttling process is a/an __________ process. (A) Reversible and isothermal (B) Irreversible and constant enthalpy (C) Reversible and constant entropy (D) Reversible and constant enthalpy

Last Answer : (B) Irreversible and constant enthalpy

A heat exchange process in which the product of pressure and volume remains constant is known as  (a) heat exchange process  (b) throttling process  (c) isentropic process  (d) adiabatic process  (e) hyperbolic process.

Description : A heat exchange process in which the product of pressure and volume remains constant is known as  (a) heat exchange process  (b) throttling process  (c) isentropic process  (d) adiabatic process  (e) hyperbolic process.

Last Answer : Answer : e

Joule-Thomson co-efficient is the ratio of (A) Pressure change to temperature change occuring during adiabatic compression of a gas (B) Pressure change to temperature change occuring during adiabatic throttling of a gas (C) Temperature change to pressure change occuring during adiabatic compression of a gas (D) Temperature change to pressure change occuring during adiabatic throttling of a gas

Description : Joule-Thomson co-efficient is the ratio of (A) Pressure change to temperature change occuring during adiabatic compression of a gas (B) Pressure change to temperature change occuring during adiabatic ... a gas (D) Temperature change to pressure change occuring during adiabatic throttling of a gas

Last Answer : (D) Temperature change to pressure change occuring during adiabatic throttling of a gas

Is a steady flow process at total constant pressure through a control volume for which there is no heat?  a. Adiabatic Saturation Process  b. Dew point  c. Adiabatic Ratio  d. None of the above

Description : Is a steady flow process at total constant pressure through a control volume for which there is no heat?  a. Adiabatic Saturation Process  b. Dew point  c. Adiabatic Ratio  d. None of the above

Last Answer : Adiabatic Saturation Process

Claude's liquefaction process employs the cooling of gases by (A) Expansion in an engine (B) Following a constant pressure cycle (C) Throttling (D) None of these

Description : Claude's liquefaction process employs the cooling of gases by (A) Expansion in an engine (B) Following a constant pressure cycle (C) Throttling (D) None of these

Last Answer : A) Expansion in an engine

The flow of a liquid through tapering pipe at a constant rate is an example of __________ flow. (A) Steady uniform (B) Steady non uniform (C) Unsteady uniform

Description : The flow of a liquid through tapering pipe at a constant rate is an example of __________ flow. (A) Steady uniform (B) Steady non uniform (C) Unsteady uniform

Last Answer : (B) Steady non uniform

Pick out the wrong statement: (A) The expansion of a gas in vacuum is an irreversible process (B) An isometric process is a constant pressure process (C) Entropy change for a reversible adiabatic process is zero (D) Free energy change for a spontaneous process is negative

Description : Pick out the wrong statement: (A) The expansion of a gas in vacuum is an irreversible process (B) An isometric process is a constant pressure process (C) Entropy change for a reversible adiabatic process is zero (D) Free energy change for a spontaneous process is negative

Last Answer : (B) An isometric process is a constant pressure process

What happens in a reversible adiabatic expansion process? (A) Heating takes place (B) Cooling takes place (C) Pressure is constant (D) Temperature is constant

Description : What happens in a reversible adiabatic expansion process? (A) Heating takes place (B) Cooling takes place (C) Pressure is constant (D) Temperature is constant

Last Answer : (B) Cooling takes place

Work done is zero for the following process  (a) constant volume  (b) free expansion  (c) throttling  (d) all Of the above  (e) none of the above.

Description : Work done is zero for the following process  (a) constant volume  (b) free expansion  (c) throttling  (d) all Of the above  (e) none of the above.

Last Answer : Answer : d

A flow through a long pipe at constant rate is called (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow

Description : A flow through a long pipe at constant rate is called (A) Steady uniform flow (B) Steady non-uniform flow (C) Unsteady uniform flow (D) Unsteady non-uniform flow

Last Answer : Answer: Option A

An approximately __________ process exemplifies the flow of a gas through a very long pipe of uniform cross-section. (A) Adiabatic (B) Isothermal (C) Isentropic (D) Isochoric

Description : An approximately __________ process exemplifies the flow of a gas through a very long pipe of uniform cross-section. (A) Adiabatic (B) Isothermal (C) Isentropic (D) Isochoric

Last Answer : (B) Isothermal

Fire tube boilers are those in which a) Flue gases pass through tubes and water around it b) Water passes through the tubes and flue gases around it c) Work is done during adiabatic expansion d) Change is enthalpy

Description : Fire tube boilers are those in which a) Flue gases pass through tubes and water around it b) Water passes through the tubes and flue gases around it c) Work is done during adiabatic expansion d) Change is enthalpy

Last Answer : a) Flue gases pass through tubes and water around it

Water tube boilers are those in which a) Flue gases pass through tubes and water around it b) Water passes through the tubes and flue gases around it c) Work is done during adiabatic expansion d) Change is enthalpy

Description : Water tube boilers are those in which a) Flue gases pass through tubes and water around it b) Water passes through the tubes and flue gases around it c) Work is done during adiabatic expansion d) Change is enthalpy

Last Answer : b) Water passes through the tubes and flue gases around it

One of the purposes of sub-cooling the liquid refrigerant is to (a) reduce compressor overheating (b) reduce compressor discharge temperature (c) increase cooling effect (d) ensure that only liquid and not the vapour enters the expansion (throttling) valve

Description : One of the purposes of sub-cooling the liquid refrigerant is to (a) reduce compressor overheating (b) reduce compressor discharge temperature (c) increase cooling effect (d) ensure that only liquid and not the vapour enters the expansion (throttling) valve

Last Answer : Ans: d

The energy equation, E + (p/ρ) + (V 2 /2g) + gZ = constant (E = internal energy/mass), is applicable to (A) Perfect gases only (B) Isothermal flow of gases (C) Adiabatic unsteady flow of gases (D) All compressible fluids

Description : The energy equation, E + (p/ρ) + (V 2 /2g) + gZ = constant (E = internal energy/mass), is applicable to (A) Perfect gases only (B) Isothermal flow of gases (C) Adiabatic unsteady flow of gases (D) All compressible fluids

Last Answer : (D) All compressible fluids

During adiabatic expansion of gas (A) Pressure remains constant (B) Pressure is increased (C) Temperature remains constant (D) None of these

Description : During adiabatic expansion of gas (A) Pressure remains constant (B) Pressure is increased (C) Temperature remains constant (D) None of these

Last Answer : (D) None of these

A process, in which the temperature of the working substance remains constant during its expansion or compression, is called  A. isothermal process  B. hyperbolic process  C. adiabatic process  D. polytropic process

Description : A process, in which the temperature of the working substance remains constant during its expansion or compression, is called  A. isothermal process  B. hyperbolic process  C. adiabatic process  D. polytropic process

Last Answer : Answer: A

The change in __________ is equal to the reversible work for compression in steady state flow process under isothermal condition. (A) Internal energy (B) Enthalpy (C) Gibbs free energy (D) Helmholtz free energy

Description : The change in __________ is equal to the reversible work for compression in steady state flow process under isothermal condition. (A) Internal energy (B) Enthalpy (C) Gibbs free energy (D) Helmholtz free energy

Last Answer : (C) Gibbs free energy

Steady uniform flow is represented by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at constant rate (D) None of these

Description : Steady uniform flow is represented by flow through a/an (A) Long pipe at constant rate (B) Long pipe at decreasing rate (C) Expanding tube at constant rate (D) None of these

Last Answer : (A) Long pipe at constant rate

Which of the following statement is true? A. the chart is plotted for pressure equal to 760mm Hg B. the constant wbt line represents adiabatic saturation process C. the constant wbt line coincides with constant enthalpy line D. all of the mentioned

Description : Which of the following statement is true? A. the chart is plotted for pressure equal to 760mm Hg B. the constant wbt line represents adiabatic saturation process C. the constant wbt line coincides with constant enthalpy line D. all of the mentioned

Last Answer : ANSWER : D

The thermodynamic law, PVy = constant, is not followed by the (A) Free expansion of an ideal gas (B) Adiabatic expansion of steam in turbine (C) Adiabatic compression of air (D) Ideal compression of air

Description : The thermodynamic law, PVy = constant, is not followed by the (A) Free expansion of an ideal gas (B) Adiabatic expansion of steam in turbine (C) Adiabatic compression of air (D) Ideal compression of air

Last Answer : Option A

Which of the following processes is irreversible process  (a) isothermal  (b) adiabatic  (c) throttling  (d) all of the above  (e) none of the above.

Description : Which of the following processes is irreversible process  (a) isothermal  (b) adiabatic  (c) throttling  (d) all of the above  (e) none of the above.

Last Answer : Answer : c

A ______ is a flow in which the gas flow is adiabatic and frictionless and entropy change is zero.  A. Isentropic flow  B. Isobaric flow  C. Steady flow  D. Uniform flow

Description : A ______ is a flow in which the gas flow is adiabatic and frictionless and entropy change is zero.  A. Isentropic flow  B. Isobaric flow  C. Steady flow  D. Uniform flow

Last Answer : Isentropic flow

Steady state temperature reached by a small amount of liquid evaporating into a large amount of unsaturated vapour-gas mixture is called the __________ temperature. (A) Dry-bulb (B) Wet-bulb (C) Dew point (D) Adiabatic saturation

Description : Steady state temperature reached by a small amount of liquid evaporating into a large amount of unsaturated vapour-gas mixture is called the __________ temperature. (A) Dry-bulb (B) Wet-bulb (C) Dew point (D) Adiabatic saturation

Last Answer : (B) Wet-bulb

During Joule-Thomson expansion of gases (A) Enthalpy remains constant (B) Entropy remains constant (C) Temperature remains constant (D) None of these

Description : During Joule-Thomson expansion of gases (A) Enthalpy remains constant (B) Entropy remains constant (C) Temperature remains constant (D) None of these

Last Answer : (A) Enthalpy remains constant

Filling of gas from a high pressure cylinder into small bottles is an example of a/an __________ process. (A) Equilibrium (B) Adiabatic (C) Steady (D) Unsteady

Description : Filling of gas from a high pressure cylinder into small bottles is an example of a/an __________ process. (A) Equilibrium (B) Adiabatic (C) Steady (D) Unsteady

Last Answer : (D) Unsteady

Enthalpy changes over a constant pressure path are always zero for __________ gas. (A) Any (B) A perfect (C) An easily liquefiable (D) A real

Description : Enthalpy changes over a constant pressure path are always zero for __________ gas. (A) Any (B) A perfect (C) An easily liquefiable (D) A real

Last Answer : (B) A perfect

Fluid flow at increasing rate through a diverging pipe is an example of __________ flow. (A) Steady uniform (B) Non-steady uniform (C) Steady non-uniform (D) Non-steady non-uniform

Description : Fluid flow at increasing rate through a diverging pipe is an example of __________ flow. (A) Steady uniform (B) Non-steady uniform (C) Steady non-uniform (D) Non-steady non-uniform

Last Answer : (D) Non-steady non-uniform

Select the correct practical example of steady non-uniform flow. (A) Motion of water around a ship in a lake (B) Motion of river around bridge piers (C) Steadily decreasing flow through a reducing section (D) Steadily increasing flow through a pipe

Description : Select the correct practical example of steady non-uniform flow. (A) Motion of water around a ship in a lake (B) Motion of river around bridge piers (C) Steadily decreasing flow through a reducing section (D) Steadily increasing flow through a pipe

Last Answer : (C) Steadily decreasing flow through a reducing section

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

When a gas is subjected to adiabatic expansion, it gets cooled due to (A) Decrease in velocity (B) Decrease in temperature (C) Decrease in kinetic energy (D) Energy spent in doing work

Description : When a gas is subjected to adiabatic expansion, it gets cooled due to (A) Decrease in velocity (B) Decrease in temperature (C) Decrease in kinetic energy (D) Energy spent in doing work

Last Answer : (D) Energy spent in doing work

Claude process of gas liquefaction employs (A) Merely compression of gas beyond its critical pressure (B) Joule-Thomson expansion cooling (C) Heat exchange with colder stream (D) Adiabatic expansion against a piston or in a turbine

Description : Claude process of gas liquefaction employs (A) Merely compression of gas beyond its critical pressure (B) Joule-Thomson expansion cooling (C) Heat exchange with colder stream (D) Adiabatic expansion against a piston or in a turbine

Last Answer : (D) Adiabatic expansion against a piston or in a turbine

Linde process of gas liquefaction employs (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Adiabatic expansion against a piston or in a turbine (D) Merely compressing the gas beyond its critical pressure

Description : Linde process of gas liquefaction employs (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Adiabatic expansion against a piston or in a turbine (D) Merely compressing the gas beyond its critical pressure

Last Answer : (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion)

In case of an __________ process, the temperature of the system increases. (A) Isothermal compression (B) Isothermal expansion (C) Adiabatic expansion (D) Adiabatic compression

Description : In case of an __________ process, the temperature of the system increases. (A) Isothermal compression (B) Isothermal expansion (C) Adiabatic expansion (D) Adiabatic compression

Last Answer : (D) Adiabatic compression

The free expansion process is a constant enthalpy process.  A. Correct  B. Incorrect

Description : The free expansion process is a constant enthalpy process.  A. Correct  B. Incorrect

Last Answer : Answer: A

On mollier chart ,free expansion or throttling process from High pressure to atmosphere is represented by • Horizontal straight line • Vertical straight line • Straight inclined line • Curved line

Description : On mollier chart ,free expansion or throttling process from High pressure to atmosphere is represented by • Horizontal straight line • Vertical straight line • Straight inclined line • Curved line

Last Answer : • Horizontal straight line