Annual total energy & production chart smoothens out ____ in energy timing of meter readings. a) Errors b) Efficiency c) Accuracy. d) Repeatability

Annual total energy & production chart smoothens out ____ in energy timing of meter readings.
a) Errors b) Efficiency
c) Accuracy. d) Repeatability
by

1 Answer

Answer :

errors
by

Related questions

The repeatability of NC machine depends on a.control loop errors b.mechanical errors c.electrical errors d.none of the mentioned

Description : The repeatability of NC machine depends on a.control loop errors b.mechanical errors c.electrical errors d.none of the mentioned

Last Answer : b.mechanical errors

Data required to plot a moving annual total is ____. a) Production b) Energy c) Both a and b d) None the above

Description : Data required to plot a moving annual total is ____. a) Production b) Energy c) Both a and b d) None the above

Last Answer : Both a and b

Air vessel provided in a reciprocating pump (A) Smoothens the flow by avoiding pulsations (B) Increases the volumetric efficiency of the pump (C) Saves the pump from the danger of cavitation (D) None of these

Description : Air vessel provided in a reciprocating pump (A) Smoothens the flow by avoiding pulsations (B) Increases the volumetric efficiency of the pump (C) Saves the pump from the danger of cavitation (D) None of these

Last Answer : (D) None of these

Plotter accuracy is measured in terms of repeatability and A) Buffer size B) Resolution C) Vertical dimensions D) Intelligence

Description : Plotter accuracy is measured in terms of repeatability and A) Buffer size B) Resolution C) Vertical dimensions D) Intelligence

Last Answer : Answer : B

Plotter accuracy is measured in terms of repeatability and a. Buffer size b. Resolution c. Vertical dimensions d. Intelligence

Description : Plotter accuracy is measured in terms of repeatability and a. Buffer size b. Resolution c. Vertical dimensions d. Intelligence

Last Answer : b. Resolution

The prime importance of these is to educate and inform consumers about how energy efficient each product is ? a) Efficiency chart c) Both a & b b) Star Rating d) None of the above

Description : The prime importance of these is to educate and inform consumers about how energy efficient each product is ? a) Efficiency chart c) Both a & b b) Star Rating d) None of the above

Last Answer : Star Rating

104. Data required to plot a moving annual total is . a) production b) energy c) both the above d) none the above

Description : 104. Data required to plot a moving annual total is . a) production b) energy c) both the above d) none the above

Last Answer : both the above

Having how much months of production and energy data, we can plot a moving annual total a) Three. b) Five c) Twelve. d) six

Description : Having how much months of production and energy data, we can plot a moving annual total a) Three. b) Five c) Twelve. d) six

Last Answer : twelve

A combination of equipment and controls which handles, stores and retrieves materials withprecision,accuracy and speed under a defined degree of automation is known as ____ a.Automated storage and retrieval system (AS/RS) b.Flexible manufacturing system c.Automated guided vehicle d.None of the above

Description : A combination of equipment and controls which handles, stores and retrieves materials withprecision,accuracy and speed under a defined degree of automation is known as ____ a.Automated storage and retrieval system (AS/RS) b.Flexible manufacturing system c.Automated guided vehicle d.None of the above

Last Answer : a.Automated storage and retrieval system (AS/RS)

Power (P) in a 3 phase circuit with two watt meters at unity power factor is (W1 & W2 = watt meter readings)

Description : Power (P) in a 3 phase circuit with two watt meters at unity power factor is (W1 & W2 = watt meter readings)

Last Answer : Power (P) in a 3 phase circuit with two watt meters at unity power factor is P = W1 + W2 (W1 & W2 = watt meter readings)

102. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Description : 102. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Last Answer : Monthly energy consumption& monthly production

67. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Description : 67. To draw a CUSUM chart following data is required a) Monthly energy consumption& monthly production b) Monthly specific energy consumption and turn over c) Monthly profits and production d) None

Last Answer : Monthly energy consumption& monthly production

Full form of BEE is ____ A. Basic Electronics and Engineering C. Bureau of Electric Energy B. Bureau of Electric Efficiency D. Bureau of Energy Efficiency

Description : Full form of BEE is ____ A. Basic Electronics and Engineering C. Bureau of Electric Energy B. Bureau of Electric Efficiency D. Bureau of Energy Efficiency

Last Answer : Bureau of Electric Efficiency

Which of the following best describes the primary purpose of audit procedures? a. To detect errors or fraud b. To comply with generally accounting principles c. To gather sufficient, appropriate evidence d. To verify the accuracy of account balances

Description : Which of the following best describes the primary purpose of audit procedures? a. To detect errors or fraud b. To comply with generally accounting principles c. To gather sufficient, appropriate evidence d. To verify the accuracy of account balances

Last Answer : To gather sufficient, appropriate evidence

Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of offset should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these

Description : Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of ... should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these

Last Answer : (B) 28.28 m

Choose the right sequence for Production Flow Analysis a.PFA Chart - Data Collection - Sortation of process plans b.Data collection - PFA chart - Sortation of process plans c.Sortation of process plans - Data collection - PFA chart d.Data collection - Sortation of process plans - PFA chart

Description : Choose the right sequence for Production Flow Analysis a.PFA Chart - Data Collection - Sortation of process plans b.Data collection - PFA chart - Sortation of process plans c.Sortation of process plans - Data collection - PFA chart d.Data collection - Sortation of process plans - PFA chart

Last Answer : d.Data collection - Sortation of process plans - PFA chart

Which of the following represents the perpetual motion of the first kind  (a) engine with 100% thermal efficiency  (b) a fully reversible engine  (c) transfer of heat energy from low temperature source to high temperature source  (d) a machine that continuously creates its own energy  (e) production of energy by temperature differential in sea water at different levels.

Description : Which of the following represents the perpetual motion of the first kind  (a) engine with 100% thermal efficiency  (b) a fully reversible engine  (c) transfer of heat energy from low ... its own energy  (e) production of energy by temperature differential in sea water at different levels.

Last Answer : Answer : d

The ultimate aim to encourage the enterprise to save the energy , reduce the production cost and increase economic benefits is ____ A. Energy audit C. Energy saving B. Energy management D. Energy

Description : The ultimate aim to encourage the enterprise to save the energy , reduce the production cost and increase economic benefits is ____ A. Energy audit C. Energy saving B. Energy management D. Energy

Last Answer : Energy management

The objective of energy management is ____ A. To achieve and maintain optimum energy procurement and utilization throughout the organization B. To minimize the energy cost without affecting production and quality C. To minimize the environmental effects D. All of the above

Description : The objective of energy management is ____ A. To achieve and maintain optimum energy procurement and utilization throughout the organization B. To minimize the energy cost without affecting production and quality C. To minimize the environmental effects D. All of the above

Last Answer : All of the above

Energy recovery is typically via production of ____ a) Gas b) Heat c) Light d) Steam

Description : Energy recovery is typically via production of ____ a) Gas b) Heat c) Light d) Steam

Last Answer : Steam

In preparing to take insulation resistance readings on a main generator, the windings should be grounded for about 15 minutes prior to the test to _____________. A. allow accurate zeroing of the meter B. help the windings to cool to ambient temperature C. release any residual capacitive charge from the windings D. help the windings to cool to the same temperature as the ground test connection

Description : In preparing to take insulation resistance readings on a main generator, the windings should be grounded for about 15 minutes prior to the test to _____________. A. allow accurate zeroing of the meter ... the windings D. help the windings to cool to the same temperature as the ground test connection

Last Answer : Answer: C

Before using a volt-ohmmeter to measure resistance readings, you should _____________. A. replace all batteries B. test the insulation resistance of the leads C. make sure the test leads do not touch D. hold the leads together and 'zero' the meter

Description : Before using a volt-ohmmeter to measure resistance readings, you should _____________. A. replace all batteries B. test the insulation resistance of the leads C. make sure the test leads do not touch D. hold the leads together and 'zero' the meter

Last Answer : Answer: D

When troubleshooting electronic equipment, you should use a high impedance multimeter ________________. A. to prevent excess current flow through the meter that would damage it B. for AC measurements only and a low resistance meter for DC measurements C. whenever a low impedance meter is not available, regardless of the components being tested D. so as not to load down the circuit and obtain erroneous voltage readings

Description : When troubleshooting electronic equipment, you should use a high impedance multimeter ________________. A. to prevent excess current flow through the meter that would damage it B. for AC measurements only ... being tested D. so as not to load down the circuit and obtain erroneous voltage readings

Last Answer : Answer: D

The average mean velocity of a stream having depth h, may be obtained by taking the average of the readings of a current meter at a depth of (A) 0.1 h and 0.9 h (B) 0.2 h and 0.8 h (C) 0.3 h and 0.7 h (D) 0.4 h and 0.6 h

Description : The average mean velocity of a stream having depth h, may be obtained by taking the average of the readings of a current meter at a depth of (A) 0.1 h and 0.9 h (B) 0.2 h and 0.8 h (C) 0.3 h and 0.7 h (D) 0.4 h and 0.6 h

Last Answer : Answer: Option B

To determine the discharge at a section in a stream from its rating curve, the required data are (i) Slope of water surface at the section (ii) Stage at the section (ii) Current meter readings at the section The correct answer is (A) (i) and (ii) (B) (ii) and (iii) (C) Only (ii) (D) Only (iii)

Description : To determine the discharge at a section in a stream from its rating curve, the required data are (i) Slope of water surface at the section (ii) Stage at the section (ii) Current meter readings at the section The correct ... ) (i) and (ii) (B) (ii) and (iii) (C) Only (ii) (D) Only (iii)

Last Answer : Answer: Option C

The two watt meters measurement the ratio of two meter readings is –(1-sqrt3):( 1+sqrt3) then the power factor is a) 1 b) 0.866 c) 0.707 d) 0

Description : The two watt meters measurement the ratio of two meter readings is –(1-sqrt3):( 1+sqrt3) then the power factor is a) 1 b) 0.866 c) 0.707 d) 0

Last Answer : Ans: 0.707

Besides setting up the meter for expected voltage ranges, what must be strictly observed when taking dc voltage readings?

Description : Besides setting up the meter for expected voltage ranges, what must be strictly observed when taking dc voltage readings?

Last Answer : Polarit

At what point on a meter movement are the most accurate readings taken?

Description : At what point on a meter movement are the most accurate readings taken?

Last Answer : Midscale.

The power consumed by a balanced 3-ph load is measured by two-wattmeter method. The meter readings are

Description : The power consumed by a balanced 3-ph load is measured by two-wattmeter method. The meter readings are 8 kW and 4 kW. The power factor of the load is (A) zero (B) 0.5 (C) between zero and 0.5 (D) between 0.5 and unity

Last Answer : The power consumed by a balanced 3-ph load is measured by two-wattmeter method. The meter readings are 8 kW and 4 kW. The power factor of the load is between 0.5 and unity

Air gap readings should be taken periodicly on electrical generation equipment to __________. A. determine the amount of varnish that can be applied to correct insulation problems B. determine the condition of the bearings C. provide for the correct proper tightening of the field coil bolts and correct lateral adjustment of the field coils D. increase machine efficiency

Description : Air gap readings should be taken periodicly on electrical generation equipment to __________. A. determine the amount of varnish that can be applied to correct insulation problems B. determine the ... field coil bolts and correct lateral adjustment of the field coils D. increase machine efficiency

Last Answer : Answer: B

What are the possible errors in induction (energy meter) measuring instruments?

Description : What are the possible errors in induction (energy meter) measuring instruments?

Last Answer : a. Phase error: Field flux in induction meter does not lag 90° behind the supply voltage due to its resistance. This can be adjusted by copper shading rings, which are placed at the central limb of the ... to prevent rotation, when one of the holes comes under one of the pole of the shunt magnet.

List the errors occuring in single phase electronic energy meter.

Description : List the errors occuring in single phase electronic energy meter.

Last Answer : Errors in Single Phase Electronic Energy Meter: 1) Error due to wrong sensor opeartion. 2) Error due to temperature. 3) Error due to wrong CT opeartion. 4) Error due to wrong PT opeartion. 5 ... of scaling network. 6) Error due to wrong ADC opeartion. 7) Error due to wrong Display. 

List any four errors in induction type energy meter. Give method of compensation for each.

Description : List any four errors in induction type energy meter. Give method of compensation for each.

Last Answer : Errors in Induction Type Energy Meter with their Compensation:  1) Error due to friction: This error can be compensated by the additional shading band provided on the shunt electromagnet.  2) Phase ... error: This error can be compensated by providing a flux diverter' to the current magnet. 

Volumetric efficiency is affected by (A) Turbulence velocity and temperature of intake manifold (B) Efficiency of exhaust stroke (C) Valve timing overlap (D) All the above

Description : Volumetric efficiency is affected by (A) Turbulence velocity and temperature of intake manifold (B) Efficiency of exhaust stroke (C) Valve timing overlap (D) All the above

Last Answer : (D) All the above

The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER). B) Energy consumption ratio (ECR). D) None of the above

Description : . The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER). B) Energy consumption ratio (ECR). D) None of the above

Last Answer : Energy efficiency RATIO (EER).

What is the most important element that ensures the accuracy of the Proformas reports? a. Production capacity b. Marketing sales forecasts c. R & D decisions d. Financial decisions e. All of the above

Description : What is the most important element that ensures the accuracy of the Proformas reports? a. Production capacity b. Marketing sales forecasts c. R & D decisions d. Financial decisions e. All of the above

Last Answer : b. Marketing sales forecasts

When a resistor is used as a shunt and is connected in parallel with a meter movement coil, it will provide _____________. A. a measurement of circuit resistance B. an increased accuracy of approximately 1.5 percent C. an extended meter range D. none of the above

Description : When a resistor is used as a shunt and is connected in parallel with a meter movement coil, it will provide _____________. A. a measurement of circuit resistance B. an increased accuracy of approximately 1.5 percent C. an extended meter range D. none of the above

Last Answer : Answer: C

A milliammeter, with a full scale deflection reading of 100 milliamps, is known to have an accuracy of + or - 2%. A meter reading of 10 milliamps would indicate a line current of between _____________. A. 9.8 and 10.0 milliamperes B. 9.8 and 10.2 milliamperes C. 8.0 and 12.0 milliamperes D. 8.0 and 10.0 milliamperes

Description : A milliammeter, with a full scale deflection reading of 100 milliamps, is known to have an accuracy of + or - 2%. A meter reading of 10 milliamps would indicate a line current of between _____________. A. 9.8 ... 9.8 and 10.2 milliamperes C. 8.0 and 12.0 milliamperes D. 8.0 and 10.0 milliamperes

Last Answer : Answer: B

For high accuracy the meter has

Last Answer : For high accuracy the meter has Hand drawn scale.

Governmental auditing often extends beyond examinations leading to the expression of opinion on the fairness of financial presentation and includes audits of efficiency, economy, effectiveness, and also: a. Accuracy b. Evaluation c. Compliance d. Internal control

Description : Governmental auditing often extends beyond examinations leading to the expression of opinion on the fairness of financial presentation and includes audits of efficiency, economy, effectiveness, and also: a. Accuracy b. Evaluation c. Compliance d. Internal control

Last Answer : Compliance

In conducting an appraisal of the economy and efficiency with which company resources are used, an internal auditor's responsibility is to: a. Verify the accuracy of asset valuation. b. Verify the existence of assets. c. Determine whether operating standards have been established. d. Review the reliability of operating information

Description : In conducting an appraisal of the economy and efficiency with which company resources are used, an internal auditor's responsibility is to: a. Verify the accuracy of asset valuation. ... . Determine whether operating standards have been established. d. Review the reliability of operating information

Last Answer : Determine whether operating standards have been established

Which design metric is used to measure the compactness of the program in terms of lines of code? (A) Consistency (B) Conciseness (C) Efficiency (D) Accuracy

Description : Which design metric is used to measure the compactness of the program in terms of lines of code? (A) Consistency (B) Conciseness (C) Efficiency (D) Accuracy

Last Answer : (B) Conciseness

The S & L activity has been identified as a key activity for energy efficiency improvement which stands for A. Standards & Listening. B. Standards & Labelling. C. Standards & Logistics. D. Standards & Lateral.

Description : The S & L activity has been identified as a key activity for energy efficiency improvement which stands for A. Standards & Listening. B. Standards & Labelling. C. Standards & Logistics. D. Standards & Lateral.

Last Answer : Standards & Labelling.

The Bureau of Energy Efficiency initiated the standard and labelling programme for equipments & appliances in A. 2001. B. 2004. C. 2006. D. 2008.

Description : The Bureau of Energy Efficiency initiated the standard and labelling programme for equipments & appliances in A. 2001. B. 2004. C. 2006. D. 2008.

Last Answer : 2006

Since repeatability is paramount to verifying the veracity of an alleged alien radio signal, why was the Arecibo message only sent once?

Description : Since repeatability is paramount to verifying the veracity of an alleged alien radio signal, why was the Arecibo message only sent once?

Last Answer : It was an SOS signal. Help did not arrive in time.

A measure of consistency or repeatability of measurements is called. ___

Description : A measure of consistency or repeatability of measurements is called. ___

Last Answer : precision

What is Digital Forensic? A. Process of using scientific knowledge in analysis and presentation of evidence in court B. The application of computer science and investigative procedures for a legal purpose involving the analysis of digital evidence after proper search authority, chain of custody, validation with mathematics, use of validated tools, repeatability, reporting, and possible expert presentation C. A process where we develop and test hypotheses that answer questions about digital events D. Use of science or technology in the investigation and establishment of the facts or evidence in a court of law

Description : What is Digital Forensic? A. Process of using scientific knowledge in analysis and presentation of evidence in court B. The application of computer science and investigative procedures for a legal ... technology in the investigation and establishment of the facts or evidence in a court of law

Last Answer : B. The application of computer science and investigative procedures for a legal purpose involving the analysis of digital evidence after proper search authority, chain of custody, validation with mathematics, use of validated tools, repeatability, reporting, and possible expert presentation

What is Digital Forensic? a. Process of using scientific knowledge in analysis and presentation of evidence in court b. The application of computer science and investigative procedures for a legal purpose involving the analysis of digital evidence after proper search authority, chain of custody, validation with mathematics, use of validated tools, repeatability, reporting, and possible expert presentation c. A process where we develop and test hypotheses that answer questions about digital events d. Use of science or technology in the investigation and establishment of the facts or evidence in a court of law

Description : What is Digital Forensic? a. Process of using scientific knowledge in analysis and presentation of evidence in court b. The application of computer science and investigative procedures for a legal ... technology in the investigation and establishment of the facts or evidence in a court of law

Last Answer : b. The application of computer science and investigative procedures for a legal purpose involving the analysis of digital evidence after proper search authority, chain of custody, validation with mathematics, use of validated tools, repeatability, reporting, and possible expert presentation

What is Digital Forensic? (A) Process of using scientific knowledge in analysis and presentation of evidence in court (B) The application of computer science and investigative procedures for a legal purpose involving the analysis of digital evidence after proper search authority, chain of custody, validation with mathematics, use of validated tools, repeatability, reporting, and possible expert presentation (C) process where we develop and test hypotheses that answer questions about digital events (D) Use of science or technology in the investigation and establishment of the facts or evidence in a court of law

Description : What is Digital Forensic? (A) Process of using scientific knowledge in analysis and presentation of evidence in court (B) The application of computer science and investigative procedures for a ... or technology in the investigation and establishment of the facts or evidence in a court of law

Last Answer : (B) The application of computer science and investigative procedures for a legal purpose involving the analysis of digital evidence after proper search authority, chain of custody, validation with mathematics, use of validated tools, repeatability, reporting, and possible expert presentation

What is Digital Forensic? A. Process of using scientific knowledge in analysis and presentation of evidence in court B. The application of computer science and investigative procedures for a legal purpose involving the analysis of digital evidence after proper search authority, chain of custody, validation with mathematics, use of validated tools, repeatability, reporting, and possible expert presentation C. process where we develop and test hypotheses that answer questions about digital events D. Use of science or technology in the investigation and establishment of the facts or evidence in a court of law

Description : What is Digital Forensic? A. Process of using scientific knowledge in analysis and presentation of evidence in court B. The application of computer science and investigative procedures for a legal ... technology in the investigation and establishment of the facts or evidence in a court of law

Last Answer : B. The application of computer science and investigative procedures for a legal purpose involving the analysis of digital evidence after proper search authority, chain of custody, validation with mathematics, use of validated tools, repeatability, reporting, and possible expert presentation