The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER). B) Energy consumption ratio (ECR). D) None of the above

. The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as
A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER).
B) Energy consumption ratio (ECR). D) None of the above
by

1 Answer

Answer :

Energy efficiency RATIO (EER).
by

Related questions

Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)?  A. EER = 2.34 COP  B. EER = 3.24 COP  C. EER = 3.42 COP  D. EER = 4.23 COP

Description : Which one is the correct relation between energy efficiency ratio (EER) and coefficient of performance (COP)?  A. EER = 2.34 COP  B. EER = 3.24 COP  C. EER = 3.42 COP  D. EER = 4.23 COP

Last Answer : EER = 3.42 COP

What refers to the amount of heat removed from the cooled space in BTS’s for 1 watt-hour of electricity consumed?  A. Cost efficiency rating  B. Energy efficiency rating  C. Coefficient of performance  D. Cost of performance

Description : What refers to the amount of heat removed from the cooled space in BTS’s for 1 watt-hour of electricity consumed?  A. Cost efficiency rating  B. Energy efficiency rating  C. Coefficient of performance  D. Cost of performance

Last Answer : Energy efficiency rating

Full form of EER is _____ A. Energy Electric Ratio C. Energy Efficiency Ratio B. Energy Effective Ratio D. Energy Electron Ratio

Description : Full form of EER is _____ A. Energy Electric Ratio C. Energy Efficiency Ratio B. Energy Effective Ratio D. Energy Electron Ratio

Last Answer : Energy Efficiency Ratio

Higher the number of stars, ________ will be the efficiency or EER a) Lesser c) Greater b) Likewise e) average

Description : Higher the number of stars, ________ will be the efficiency or EER a) Lesser c) Greater b) Likewise e) average

Last Answer : Greater

Higher the number stars, EER or efficiency will be. A. Greater C. Lesser B. Moderate D. None of the above

Description : Higher the number stars, EER or efficiency will be. A. Greater C. Lesser B. Moderate D. None of the above

Last Answer : Greater

. How can we increase the efficiency of a cooling tower? a. Save energy. b. Reduce the amount of water being consumed. c. Decrease the amount of chemicals required for water treatment. d. All of above

Description : . How can we increase the efficiency of a cooling tower? a. Save energy. b. Reduce the amount of water being consumed. c. Decrease the amount of chemicals required for water treatment. d. All of above

Last Answer : All of above

How can we increase the efficiency of a cooling tower? a. Save energy. b. Reduce the amount of water being consumed. c. Decrease the amount of chemicals required for water treatment. d. All of above

Description : How can we increase the efficiency of a cooling tower? a. Save energy. b. Reduce the amount of water being consumed. c. Decrease the amount of chemicals required for water treatment. d. All of above

Last Answer : d. All of above

The coefficient of performance (COP) is the ratio between the:  A. Power consumption in watts and heat absorbed per hour  B. Heat absorbed per hour and the power consumption in watts  C. Work required and the absorbed heat  D. Absorbed heat and work required

Description : The coefficient of performance (COP) is the ratio between the:  A. Power consumption in watts and heat absorbed per hour  B. Heat absorbed per hour and the power consumption in watts  C. Work required and the absorbed heat  D. Absorbed heat and work required

Last Answer : Absorbed heat and work required

In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air consumption, brake power and incylinder pressure. Tutorials on engine performance parameters. Heat balance sheet. Engine performance curves. 1. The increase in intake air temperature into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Description : In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air ... into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Last Answer : ANSWER : B

103. What is specific energy consumption. a) energy consumption per month b) Energy consumed per unit of production c) energy consumption per year d) none of the above

Description : 103. What is specific energy consumption. a) energy consumption per month b) Energy consumed per unit of production c) energy consumption per year d) none of the above

Last Answer : Energy consumed per unit of production

Energy Efficiency Ratio is Equal A. Cooling Capacity (W) + Power consumption (W) B. Cooling Capacity (W) - Power consumption (W) C. Cooling Capacity (W) / Power consumption (W) D. Cooling Capacity (W) X Power consumption (

Description : Energy Efficiency Ratio is Equal A. Cooling Capacity (W) + Power consumption (W) B. Cooling Capacity (W) - Power consumption (W) C. Cooling Capacity (W) / Power consumption (W) D. Cooling Capacity (W) X Power consumption (W)

Last Answer : Cooling Capacity (W) + Power consumption (W)

What are the benefits or the advantages of waste heat recovery units (WHRU)? a) Reduced Pollution b) Reduced equipment sizes c) Reduced auxiliary energy consumption. d) All of the above

Description : What are the benefits or the advantages of waste heat recovery units (WHRU)? a) Reduced Pollution b) Reduced equipment sizes c) Reduced auxiliary energy consumption. d) All of the above

Last Answer : All of the above

If the performance of diesel engine of different sizes, cylinder dimensions and power rating are to be compared, which of the following parameters can be used for such comparison? (a) Swept volume (b) Air fuel ratio (c) Specific brake fuel consumption (d) Volumetric efficiency

Description : If the performance of diesel engine of different sizes, cylinder dimensions and power rating are to be compared, which of the following parameters can be used for such comparison? (a) Swept volume (b) Air fuel ratio (c) Specific brake fuel consumption (d) Volumetric efficiency

Last Answer : Ans :c

Thermal efficiency is the ratio of:  A. Network input to total heat input  B. Network output to total heat output  C. Network output to total heat input  D. Network input to total heat output

Description : Thermal efficiency is the ratio of:  A. Network input to total heat input  B. Network output to total heat output  C. Network output to total heat input  D. Network input to total heat output

Last Answer : Network output to total heat input

Minimum EER of 5-star rating is a. 3.50 c) 3.99 b. 4.00 d) 4.50

Description : Minimum EER of 5-star rating is a. 3.50 c) 3.99 b. 4.00 d) 4.50

Last Answer : 4.50

The relation between EER in BTU/hr/W EER in W/W is given as_________. A. EER in BTU/hr/W = 3.245 EER in W/W. B. EER in BTU/hr/W = 3.44 EER in W/W. C. EER in BTU/hr/W = 3.413 EER in W/W. D. EER in BTU/hr/W = 1.234 EER in W/W.

Description : The relation between EER in BTU/hr/W EER in W/W is given as_________. A. EER in BTU/hr/W = 3.245 EER in W/W. B. EER in BTU/hr/W = 3.44 EER in W/W. C. EER in BTU/hr/W = 3.413 EER in W/W. D. EER in BTU/hr/W = 1.234 EER in W/W.

Last Answer : EER in BTU/hr/W = 3.413 EER in W/W.

EER in BTU/hr/W = a) 3.222 * EER in W/W c) 3.413 * EER in W/W b) 3.234 * EER in W/W d) 3.400 * EER in W/W

Description : EER in BTU/hr/W = a) 3.222 * EER in W/W c) 3.413 * EER in W/W b) 3.234 * EER in W/W d) 3.400 * EER in W/W

Last Answer : 3.413 * EER in W/W

We have defined EER by a) BTU/hr/W c) BTU/min/W b) BTU/sec/W d) BTU/hr/V

Description : We have defined EER by a) BTU/hr/W c) BTU/min/W b) BTU/sec/W d) BTU/hr/V

Last Answer : BTU/hr/W

EER in BTU/HR/W = ______ X EER in W/W A. 3.410 C. 3.411 B. 3.412 D. 3.413

Description : EER in BTU/HR/W = ______ X EER in W/W A. 3.410 C. 3.411 B. 3.412 D. 3.413

Last Answer : 3.413

___________ is the minimum EER for 5-star in India in 2019. A) 4.50 C) 4.00 B) 7.10 D) 4.49

Description : ___________ is the minimum EER for 5-star in India in 2019. A) 4.50 C) 4.00 B) 7.10 D) 4.49

Last Answer : 4.50

Which of the following statement(s) is/are true concerning oxygen consumption (O2)? a. O2 is normally 100–120 cc2/m2/min b. Resting O2 is controlled by the level of thyroid and catecholamine hormones c. Under steady state conditions the amount of oxygen consumed exceeds the amount of oxygen taken up by the pulmonary capillaries d. O2 is dependent on the status of pulmonary function

Description : Which of the following statement(s) is/are true concerning oxygen consumption (O2)? a. O2 is normally 100-120 cc2/m2/min b. Resting O2 is controlled by the level of thyroid and catecholamine ... of oxygen taken up by the pulmonary capillaries d. O2 is dependent on the status of pulmonary function

Last Answer : Answer: a, b Oxygen consumed in the process of metabolism is expressed as the volume of oxygen per minute (O2). O2 is normally 100-120 cc2/m2/min, or 200 cc/min for a typical adult. ... , so we measure O2 across the lung and assume that it is exactly the amount consumed in the systemic metabolism

Function of endorsement label is ___. a) Gives necessary information b) Target limits on energy performance c) Allow consumers to compare the energy consumption of similar products d) Provide a certification to inform prospective purchasers

Description : Function of endorsement label is ___. a) Gives necessary information b) Target limits on energy performance c) Allow consumers to compare the energy consumption of similar products d) Provide a certification to inform prospective purchasers

Last Answer : Provide a certification to inform prospective purchasers

The function of comparative label is ____ a) Allow consumers to compare the energy consumption of similar products b) Provide a certification to inform prospective purchasers c) Gives necessary information d) Target limits on energy performance

Description : The function of comparative label is ____ a) Allow consumers to compare the energy consumption of similar products b) Provide a certification to inform prospective purchasers c) Gives necessary information d) Target limits on energy performance

Last Answer : Allow consumers to compare the energy consumption of similar products

BEE Energy efficiency ratings are based on a) Savings in cost c) savings in electricity consumption b) Savings in input d) savings in machinery

Description : BEE Energy efficiency ratings are based on a) Savings in cost c) savings in electricity consumption b) Savings in input d) savings in machinery

Last Answer : savings in electricity consumption

According to……………… ―energy audit‖ means verification, monitoring, analysis of use of energy including submission of technical report containing recommendations for improving energy efficiency with cost benefit analysis and an action plan to reduce energy consumption a) Energy conservation act 2001 b) Industrial act 1946 c) Factory act 1947 d) none of act

Description : According to -energy audit means verification, monitoring, analysis of use of energy including submission of technical report containing recommendations for improving energy efficiency with cost benefit analysis ... act 2001 b) Industrial act 1946 c) Factory act 1947 d) none of act

Last Answer : Energy conservation act 2001

A levy of excise duty on consumption of an item consumed will …………….. (a) Induce suppliers to pump in more quantity in the market; (b) Result in fall in the consumption of the commodity and lower total expenditure on it by the consumer ; (c) Lead to inflationary conditions ; (d) Place the consumer on lower indifference curve

Description : A levy of excise duty on consumption of an item consumed will .. (a) Induce suppliers to pump in more quantity in the market; (b) Result in fall in the consumption of the commodity ... by the consumer ; (c) Lead to inflationary conditions ; (d) Place the consumer on lower indifference curve

Last Answer : (d) Place the consumer on lower indifference curve 

__________ techniques can be used to learn more about current and potential customers. a. Strategic partnerships b. Customer loyalty c. Data mining d. Efficient customer response (ECR)

Description : __________ techniques can be used to learn more about current and potential customers. a. Strategic partnerships b. Customer loyalty c. Data mining d. Efficient customer response (ECR)

Last Answer : b. Customer loyalty

34. The percentage of energy saved at the current rate of use, compared to the reference year rate of use, is called a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Description : The percentage of energy saved at the current rate of use, compared to the reference year rate of use, is called a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Last Answer : Energy Performance

31. Replacement of steam based hot water generation by solar system is an example of a) Matching energy usage to the requirement b) Maximising system efficiency c) Energy substitution d) Performance improvement

Description : Replacement of steam based hot water generation by solar system is an example of a) Matching energy usage to the requirement b) Maximising system efficiency c) Energy substitution d) Performance improvement

Last Answer : Energy substitution

The percentage of energy saved at the current rate of use ,compared to the refference year rate of use is called…….. a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Description : The percentage of energy saved at the current rate of use ,compared to the refference year rate of use is called…….. a) Energy Utilization b) Energy Performance c) Energy Efficiency d) None

Last Answer :  Energy Performance 

_____ energy performance/ efficiency. a] Allocating c] Allocating b] Checking d] Determining

Description : _____ energy performance/ efficiency. a] Allocating c] Allocating b] Checking d] Determining

Last Answer : determining

The full form of MEPS A) Minimum energy protection standards C) minimum energy policies standard B) Minimum energy performance standards D) minimum efficiency performance standards

Description : The full form of MEPS A) Minimum energy protection standards C) minimum energy policies standard B) Minimum energy performance standards D) minimum efficiency performance standards

Last Answer : Minimum energy performance standards

What is the full form of BEE? A) Basic electrical and electronics. C) Bureau of energy efficiency. B) Bureau of energy equipment. D) all of the above.

Description : What is the full form of BEE? A) Basic electrical and electronics. C) Bureau of energy efficiency. B) Bureau of energy equipment. D) all of the above.

Last Answer : Bureau of energy efficiency.

What is the full form of EPR ?

Last Answer : The full form of EPR is East Pakistan Rifles.

Tractors with less specific fuel consumption should be preferred because..... A. High efficiency C. Good output B. Good for field D. Less cost.

Description : Tractors with less specific fuel consumption should be preferred because..... A. High efficiency C. Good output B. Good for field D. Less cost

Last Answer : Less cost

Benefits of Waste Heat Recovery a. Reduction in pollution b. Reduction in equipment sizes c. Reduction in auxiliary energy consumption d. All of the above

Description : Benefits of Waste Heat Recovery a. Reduction in pollution b. Reduction in equipment sizes c. Reduction in auxiliary energy consumption d. All of the above

Last Answer : Ans:- d. All of the above

What is the ratio of the useful heat extracted to heating value?  A. Combustion efficiency  B. Phase efficiency  C. Heat efficiency  D. Work efficiency

Description : What is the ratio of the useful heat extracted to heating value?  A. Combustion efficiency  B. Phase efficiency  C. Heat efficiency  D. Work efficiency

Last Answer : Combustion efficiency

Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle  A. combustion is at constant volume  B. expansion and compression are isentropic  C. maximum temperature is higher  D. heat rejection is lower

Last Answer : Answer: D

For same compression ratio and for same heat added  (a) Otto cycle is more efficient than Diesel cycle  (b) Diesel cycle is more efficient than Otto cycle  (c) efficiency depends on other factors  (d) both Otto and Diesel cycles are equally efficient  (e) none of the above.

Description : For same compression ratio and for same heat added  (a) Otto cycle is more efficient than Diesel cycle  (b) Diesel cycle is more efficient than Otto cycle  (c) efficiency depends on other factors  (d) both Otto and Diesel cycles are equally efficient  (e) none of the above.

Last Answer : Answer : a

Heat recovery provides valuable energy sources and ....... consumption. a) Reduce energy b) Increase energy c) Increase fuel d) Reduce fuel

Description : Heat recovery provides valuable energy sources and ....... consumption. a) Reduce energy b) Increase energy c) Increase fuel d) Reduce fuel

Last Answer : Reduce energy

Energy consumption per unit of GDP is called as: a) Energy Ratio b) Energy intensity c) Per capita consumption d) None

Description : Energy consumption per unit of GDP is called as: a) Energy Ratio b) Energy intensity c) Per capita consumption d) None

Last Answer : Energy intensity

The hyperboloid shape also aids in accelerating the upward convective air flow, improving ________ efficiency. • Performance • Cooling • Heating • All of the above

Description : The hyperboloid shape also aids in accelerating the upward convective air flow, improving ________ efficiency. • Performance • Cooling • Heating • All of the above

Last Answer : cooling

Total primary energy consumption of fuel in the world is lead by a) Coal b) Nuclear c) Hydro d) Oil

Description : Total primary energy consumption of fuel in the world is lead by a) Coal b) Nuclear c) Hydro d) Oil

Last Answer : coal

78 India‘s total primary energy consumption is a) 24.3 BTU b) 19.01 BTU c) 120 BTU d) 30.1 BTU

Description : 78 India‘s total primary energy consumption is a) 24.3 BTU b) 19.01 BTU c) 120 BTU d) 30.1 BTU

Last Answer : 30.1 BTU

71. Total primary energy consumption of fuel in the world is lead by a) Coal b) Nuclear c) Hydro d) Oil

Description : 71. Total primary energy consumption of fuel in the world is lead by a) Coal b) Nuclear c) Hydro d) Oil

Last Answer : coal

What are the important operational performance parameters in design of fuel firing equipment ?

Description : What are the important operational performance parameters in design of fuel firing equipment ?

Last Answer : Fuel flexibility, electrical load following capability, reliability, availability, and maintenance ease.

Energy audit can also save you significant amount of money by……….. a) Maximum energy efficiency b) Minimum energy efficiency c) None of the above d) All of the above

Description : Energy audit can also save you significant amount of money by……….. a) Maximum energy efficiency b) Minimum energy efficiency c) None of the above d) All of the above

Last Answer : Maximum energy efficiency

Specific fuel consumption is defined as a. fuel consumption per hour b. fuel consumed per km. c. fuel consumed per BHP d. fuel consumed per hour per BHP

Description : Specific fuel consumption is defined as a. fuel consumption per hour b. fuel consumed per km. c. fuel consumed per BHP d. fuel consumed per hour per BHP

Last Answer : ANSWER d. fuel consumed per hour per BHP

What are Capital goods? a) Goods used for consumption in the production process b) Goods such as tools, machinery, etc which are used to create final consumer goods c) Goods and services that are consumed fully when purchased by the consumers d) None of the above

Description : What are Capital goods? a) Goods used for consumption in the production process b) Goods such as tools, machinery, etc which are used to create final consumer goods c) Goods and services that are consumed fully when purchased by the consumers d) None of the above

Last Answer : : b) Goods such as tools, machinery, etc which are used to create final consumer goods

What are consumption goods? a) Goods used for consumption in the production process b) Goods such as tools, machinery, etc which are used to create final consumption goods c) Goods and services that are consumed fully when purchased by the consumers d) None of the above

Description : What are consumption goods? a) Goods used for consumption in the production process b) Goods such as tools, machinery, etc which are used to create final consumption goods c) Goods and services that are consumed fully when purchased by the consumers d) None of the above

Last Answer : : c) Goods and services that are consumed fully when purchased by the consumers