Typical human voice is centered around ________Hz. (A) 200-400 (B) 280-3000 (C) 400-600 (D) 1400-1800

Typical human voice is centered around ________Hz.
 (A) 200-400 (B) 280-3000
(C) 400-600 (D) 1400-1800
by

1 Answer

Answer :

(B) 280-3000
by

Related questions

Gasification of the solid fuel converts its organic part into combustible by interaction with air/oxygen and steam so as to obtain a secondary gaseous fuel of high calorific value having no ash. Gasification reactions are normally carried out at about __________ °C. (A) 400-500 (B) 900-1000 (C) 1400-1500 (D) 1700-1800

Description : Gasification of the solid fuel converts its organic part into combustible by interaction with air/oxygen and steam so as to obtain a secondary gaseous fuel of high calorific value having no ash. Gasification reactions are ... __________ °C. (A) 400-500 (B) 900-1000 (C) 1400-1500 (D) 1700-1800

Last Answer : (B) 900-1000

Maximum vertical clearance (VC) for a slab/ girder bridges with discharge above 3000 cumecs is a) 300 mm b) 1500 mm c) 1800 mm* d) 600 mm

Description : Maximum vertical clearance (VC) for a slab/ girder bridges with discharge above 3000 cumecs is a) 300 mm b) 1500 mm c) 1800 mm* d) 600 mm

Last Answer : c) 1800 mm*

Show how finite state machine model helps in designing a switching system and give a typical example.

Description : Show how finite state machine model helps in designing a switching system and give a typical example.

Last Answer : Switching system basically belongs to the class of finite state machines (FSM) which are asynchronous in nature and follows a sequential logic for their operation. They can be modeled by ... circuits and memory elements. Clocked synchronous operation shown in Fig. overcome such problems.  

A Master group consists of (A) 12 voice channels. (B) 24 voice channels (C) 60 voice channels. (D) 300 voice channels

Description : A Master group consists of (A) 12 voice channels. (B) 24 voice channels (C) 60 voice channels. (D) 300 voice channels

Last Answer : (D) 300 voice channels

In glycinuria daily urinary excretion of glycine ranges from (A) 100–200 mg (B) 300–500 mg (C) 600–1000 mg (D) 1100–1400 mg

Description : In glycinuria daily urinary excretion of glycine ranges from (A) 100–200 mg (B) 300–500 mg (C) 600–1000 mg (D) 1100–1400 mg

Last Answer : Answer : C

Amount of phenylacetic acid excreted in the urine in phenylketonuria is (A) 100–200 mg/dL (B) 200–280 mg/dL (C) 290–550 mg/dL (D) 600–750 mg/dL

Description : Amount of phenylacetic acid excreted in the urine in phenylketonuria is (A) 100–200 mg/dL (B) 200–280 mg/dL (C) 290–550 mg/dL (D) 600–750 mg/dL

Last Answer : Answer : C

Osmotic pressure of plasma is (A) 80–100 milliosmole/litre (B) 180–200 milliosmole/litre (C) 280–300 milliosmole/litre (D) 380–400 milliosmole/litre

Description : Osmotic pressure of plasma is (A) 80–100 milliosmole/litre (B) 180–200 milliosmole/litre (C) 280–300 milliosmole/litre (D) 380–400 milliosmole/litre

Last Answer : Answer : C

Heat recovery equipment will be most effective when the temperature of flue gas is: a) 250oC b) 200 oC c)400 oC d) 280 oC

Description : Heat recovery equipment will be most effective when the temperature of flue gas is: a) 250oC b) 200 oC c)400 oC d) 280 oC

Last Answer : 400 oC

The daily water allowance for normal adult (60 kg) is about (A) 200–600 ml (B) 500–800 ml (C) 800–1500 ml (D) 1800–2500 ml

Description : The daily water allowance for normal adult (60 kg) is about (A) 200–600 ml (B) 500–800 ml (C) 800–1500 ml (D) 1800–2500 ml

Last Answer : Answer : D

Malwa culture – 1800 B.C. ,Early Jorwe culture – 1400 B.C.  ,Ahar culture – 4000 B.C.E. 

Description : Malwa culture – 1800 B.C. ,Early Jorwe culture – 1400 B.C.  ,Ahar culture – 4000 B.C.E. 

Last Answer : Write the correct chronological order: (a) Malwa culture - 1800 B.C. (b) Early Jorwe culture - 1400 B.C. ... .E. (d) Savalda culture - 2000 B.C.E.

Minimum excretory urinary volume for waste products elimination during 24 hrs is (A) 200–300 ml (B) 200–400 ml (C) 500–600 ml (D) 800 ml

Description : Minimum excretory urinary volume for waste products elimination during 24 hrs is (A) 200–300 ml (B) 200–400 ml (C) 500–600 ml (D) 800 ml

Last Answer : Answer : C

The total body water in ml/kg body weight in average normal young adult male is about (A) 200 (B) 400 (C) 600 (D) 1000

Description : The total body water in ml/kg body weight in average normal young adult male is about (A) 200 (B) 400 (C) 600 (D) 1000

Last Answer : Answer : C

The daily requirement of calcium is (A) 200 mg (B) 400 mg (C) 800 mg (D) 600 mg

Description : The daily requirement of calcium is (A) 200 mg (B) 400 mg (C) 800 mg (D) 600 mg

Last Answer : Answer : C

In glycoproteins the carbohydrate is in the form of disaccharide units, the number of units are (A) 50–100 (B) 200–300 (C) 400–500 (D) 600–700

Description : In glycoproteins the carbohydrate is in the form of disaccharide units, the number of units are (A) 50–100 (B) 200–300 (C) 400–500 (D) 600–700

Last Answer : Answer : D

Amylose contains glucose units (A) 100–200 (B) 200–300 (C) 300–400 (D) 500–600

Description : Amylose contains glucose units (A) 100–200 (B) 200–300 (C) 300–400 (D) 500–600

Last Answer : C

Common rail injection system uses injection pressures of the order a) 100-200 bar b) 200-400 bar c) 400-600 bar d) 1500 bar

Description : Common rail injection system uses injection pressures of the order a) 100-200 bar b) 200-400 bar c) 400-600 bar d) 1500 bar

Last Answer : Answer: d Explanation: Generally, common rail injection system uses injection pressures of the order 1500 bar.

Maximum root zone depth for Maize (a) 200-300 mm (b) 400-600 mm (c) 500-600 mm (d) 350- 450 mm

Description : Maximum root zone depth for Maize (a) 200-300 mm (b) 400-600 mm (c) 500-600 mm (d) 350- 450 mm

Last Answer : (b) 400-600 mm

Number of meiotic divisions required to produce 200/400 seeds of pea would be (a) 200/400 (b) 400/800 (c) 300/600 (d) 250/500

Description : Number of meiotic divisions required to produce 200/400 seeds of pea would be (a) 200/400 (b) 400/800 (c) 300/600 (d) 250/500

Last Answer : (d) 250/500.

Orbital radius of GPS satellites is approximately: (A) 15,200 km (B) 26,600 km (C) 18,400 km (D) 36,000 km

Description : Orbital radius of GPS satellites is approximately: (A) 15,200 km (B) 26,600 km (C) 18,400 km (D) 36,000 km

Last Answer : Answer: Option B

The mass of 2.5 m3 of a certain liquid is 2 tonnes. Its mass density is (A) 200 kg/m3 (B) 400 kg/m3 (C) 600 kg/m3 (D) 800 kg/m

Description : The mass of 2.5 m3 of a certain liquid is 2 tonnes. Its mass density is (A) 200 kg/m3 (B) 400 kg/m3 (C) 600 kg/m3 (D) 800 kg/m

Last Answer : Answer: Option D

The frequency of operation is per minute A. 600 cycles C. 400 cycles B. 100 cycles. D. 200 cycles

Description : The frequency of operation is per minute A. 600 cycles C. 400 cycles B. 100 cycles. D. 200 cycles

Last Answer : 400 cycles

A sewer has a diameter of 300 mm and slop of 1 in 400. While running full it has a mean velocity of 0.7 m/s. If both the diameter and slope are doubled (to respectively be 600 mm and 1 in 200), what will be the changed mean velocity when running half-full? Use Manning’s formula. (a) 1.59 m/s (b) 2.80 m/s (c) 0.90 m/s (d) 1.00 m/s

Description : A sewer has a diameter of 300 mm and slop of 1 in 400. While running full it has a mean velocity of 0.7 m/s. If both the diameter and slope are doubled (to respectively be 600 mm and 1 in 200), what will be the changed mean velocity ... 's formula. (a) 1.59 m/s (b) 2.80 m/s (c) 0.90 m/s (d) 1.00 m/s

Last Answer : (a) 1.59 m/s

Two alternators rated are 200 KW at 4% regulation, 400 KW 5% regulation operating in parallel at 50HZ , when supply 600 KW the new frequency is a) 50 b) 49 c) 51.3 d) 47.7

Description : Two alternators rated are 200 KW at 4% regulation, 400 KW 5% regulation operating in parallel at 50HZ , when supply 600 KW the new frequency is a) 50 b) 49 c) 51.3 d) 47.7

Last Answer : Ans: 47.7

Optimum operating cylinder speed for the power operated maize sheller is a) 200-400rpm b) 400-600rpm c) 600-800rpm d) 1000-1200rpm

Description : Optimum operating cylinder speed for the power operated maize sheller is a) 200-400rpm b) 400-600rpm c) 600-800rpm d) 1000-1200rpm

Last Answer : c) 600-800rpm

The amount of liquid required for spraying of plantation crops is : a.) 200-400L/ha b.) 400-600L/ha c.) 600-800L/ha d.) 1000-1200L/ha

Description : The amount of liquid required for spraying of plantation crops is : a.) 200-400L/ha b.) 400-600L/ha c.) 600-800L/ha d.) 1000-1200L/ha

Last Answer : d.) 1000-1200L/ha

he amount of liquid required for ground spraying of agricultural crops is : a.) 400-600L/ha b.) 200-400L/ha c.) 1000-2000L/ha d.) 600-800L/ha

Description : he amount of liquid required for ground spraying of agricultural crops is : a.) 400-600L/ha b.) 200-400L/ha c.) 1000-2000L/ha d.) 600-800L/ha

Last Answer : a.) 400-600L/ha

With direct water cooling it is possible to have ratings of about (a) 200 MW (b) 300 MW (c) 400 MW (d) 600 MW

Description : With direct water cooling it is possible to have ratings of about (a) 200 MW (b) 300 MW (c) 400 MW (d) 600 MW

Last Answer : (d) 600 MW

Commercial available medium size machines have a speed range of ______ . (a) 200 to 400 r.p.m. (b) 600 to 1000 r.p.m. (c) 1000 to 1500 r.p.m. (d) 2000 to 2500 r.p.m.

Description : Commercial available medium size machines have a speed range of ______ . (a) 200 to 400 r.p.m. (b) 600 to 1000 r.p.m. (c) 1000 to 1500 r.p.m. (d) 2000 to 2500 r.p.m.

Last Answer : (d) 2000 to 2500 r.p.m.

P and Q undertake to do a piece of job for Rs.1200. P alone can do it in 12 days while Q alone can do it in 16 days. With the help of R , they finish it in 6 days. Find the share of P,Q & R. a) 400,600,200 b) 200,400,600 c) 450,400,250 d) 600,450,150

Description :  P and Q undertake to do a piece of job for Rs.1200. P alone can do it in 12 days while Q alone can do it in 16 days. With the help of R , they finish it in 6 days. Find the share of P,Q & R. a) 400,600,200 b) 200,400,600 c) 450,400,250 d) 600,450,150

Last Answer : D R;s 1 day work = 1/6 – (1/12 + 1/16) =1/6 – 1/12 – 1/16 = (8-4-3)/48 = 1/48 P:Q:R = ratio of 1 day work = 1/12:1/16 : 1/48 =4:3:1 P’s share = Rs(1200*4/8) =Rs.600 Q’s share = Rs(1200 * 3/8) =Rs.450 R’s share = Rs(1200 * 1/8) =Rs.150

A motor pumps water from a well into a tank at the rate of 3000 c.c./sec while another outlet pumps water out of the tank at the rate of 1800 c.c./sec

Description : A motor pumps water from a well into a tank at the rate of 3000 c.c./sec while another outlet pumps water out of the tank at the rate of 1800 c.c./sec

Last Answer : A motor pumps water from a well into a tank at the rate of 3000 c.c./sec while another outlet ... the motor and outlet are in operation (in minutes).

While the oxy-acetylene flame produces a temperature of 3200°C, the temperature produced by oxy-hydrogen flame is about __________ °C. (A) 1800 (B) 2000 (C) 2400 (D) 3000

Description : While the oxy-acetylene flame produces a temperature of 3200°C, the temperature produced by oxy-hydrogen flame is about __________ °C. (A) 1800 (B) 2000 (C) 2400 (D) 3000

Last Answer : (B) 2000

What do you mean by numbering and addressing? Draw the ISDN address structure and explain how the addressing works?

Description : What do you mean by numbering and addressing? Draw the ISDN address structure and explain how the addressing works?

Last Answer :  Numbering and Addressing: In telephone and data networks, the end equipments are more often single units than multiple devices units like PABX or LAN. Historically, a telephone, a computer, or a ... as reference point may also be addressed by using direct inward dialing (DID) feature.  

Explain the process of inter-register signalling.

Description : Explain the process of inter-register signalling.

Last Answer : Registers are used in common control exchanges to store and analyze routing data. They are provided on a common basis is a single register provides routing data for a number of speech circuits. Once a call ... it is released and the originating register signals to the next register.

Draw a centralized SPC organization and explain how it works under load sharing operation.

Description : Draw a centralized SPC organization and explain how it works under load sharing operation.

Last Answer : In centralized control, all the control equipment is replaced by a single processor which must be quite powerful. It must be capable of processing 10 to 100 calls per second, depending on the ... both the processors are active simultaneously and share the load and the resources dynamically.  

Explain FDM and show how CCITT standards help in building the base band?

Description : Explain FDM and show how CCITT standards help in building the base band?

Last Answer : Frequency Division Multiplexing: It is the process of combining several information channels by shifting their signals to different frequency groups within the spectrum so that they can be transmitted simultaneously ... of 24 channels were assembled together in one stage of modulation.     

What are transmission bridges? How do they help in satisfying the connectivity?

Description : What are transmission bridges? How do they help in satisfying the connectivity?

Last Answer : A typical transmission bridge is shown in Fig. The series capacitance and the shunt inductances of the two relays provide a high-pass filter to transmit the AC speech signals, while the relays respond independently to the DC loop/disconnect signals from the calling and called customer.  

What are the different ways of designing 100 line exchange using uni selector and two motion selectors? Show at least three variations. Which is the best option?

Description : What are the different ways of designing 100 line exchange using uni selector and two motion selectors? Show at least three variations. Which is the best option?

Last Answer : Here three different designing methods for 100 line exchange are discussed: Design 1: Here, Strowger switching system is designed using one two-motion selector for each subscriber. A ... only under certain specific traffic conditions and generally lead to higher blocking probabilities.  

How numbering plan is achieved in modern telephony? Give the structure with example.

Description : How numbering plan is achieved in modern telephony? Give the structure with example.

Last Answer :  The objective of numbering plan is to uniquely identify every subscriber connected to a telecommunication network. A numbering plan may be open, semiopen or closed. An open-numbering plan permits wide ... known as the subscriber number which is the number listed in the telephone directory.   

How does a touch tone receiver differs from pulsed dial receiver? Explain with schematic.

Description : How does a touch tone receiver differs from pulsed dial receiver? Explain with schematic.

Last Answer : Pulse dialing: 1. Generated through make and break contact. 2. DC Current pulse is generated. 3. Each number is separated by a short pause to prevent overlapping. 4. Codes ... dialing pulse is not misinterpreted as the phone being returned to its on-hook (idle) condition.   

Discuss different Routing plan adopted in a Telephone network.

Description : Discuss different Routing plan adopted in a Telephone network.

Last Answer : Hierarchical networks are capable of handing heavy traffic where required, and at the same time use minimal number of trunk groups. Three methods are used for deciding on the route for a ... selection methods can be implemented. Computer based routing is a standard feature in data networks.  

Discuss briefly subscriber loop system. Give some technical specification for subscriber lines.

Description : Discuss briefly subscriber loop system. Give some technical specification for subscriber lines.

Last Answer : Subscriber Loop System: Every subscriber in a telephone network is connected generally to the nearest switching office by means of a dedicated pair of wires. Subscriber loop refers to this pair of wires. It is un ... 1. Diameter of wire 2. D.C. resistance per Km 3. Attenuation per Km 

What is Traffic Engineering? Define the term busy hour, traffic intensity and grade of service.

Description : What is Traffic Engineering? Define the term busy hour, traffic intensity and grade of service.

Last Answer : Traffic engineering provides the basis for analysis and design of telecommunication network to carry a given traffic at a particular loss probability. It provides a means to determine the quantum of common equipments ... A0  Where  A= offered traffic  A0 = carried traffic  A-A0= lost traffic    

Explain topology method used in LAN technology in detail.

Description : Explain topology method used in LAN technology in detail.

Last Answer : LAN Topologies: Network topology is a physical schematic which shows interconnection of the many users. There are four basic topologies as under: (i) Direct Connection or one to all topology ( ... temporarily, inserting the new node and then reestablishing the complete ring path.

List all seven layer of OSI model and describe function of application layer.

Description : List all seven layer of OSI model and describe function of application layer.

Last Answer : The layers of OSI model are as follows:  (1) The Physical Layer: This defines an interface in terms of the connections, voltage levels and data rate, in order for signals to ... with the applications programs needed. Examples include electronic mail, word processing, banking transactions, etc.  

Find the total number of link L having five entities? Explain differences between folded and non-folded network.

Description : Find the total number of link L having five entities? Explain differences between folded and non-folded network.

Last Answer : Folded network: When all the inlets/outlets are connected to the subscriber lines, the logical connection appears as shown in Fig. In this case, the output lines are folded back to the input ... non-folded network to be non-blocking, the network should support N simultaneous switching paths.  

Explain simple telephone communication system with circuit and equation of current flow in microphone?

Description : Explain simple telephone communication system with circuit and equation of current flow in microphone?

Last Answer : Simple Telephone Communication: In the simplest form of a telephone circuit, there is one way communication involving two entities, one receiving (listening) and the other transmitting (talking).   ... carrier wave in AM system. The quantity m is equivalent to the modulation index in AM. 

Explain crossbar exchange, with all call processing steps and diagrams

Description : Explain crossbar exchange, with all call processing steps and diagrams

Last Answer : The basic idea of crossbar switching is to provide a matrix of n x m sets of contacts with only n + m activators or less to select one of the n x m sets of contacts. This form of ... a contact is established at the cross point 6 such that the subscriber B is connected to the subscriber C. 

What are the advantages and disadvantages of packet switching over circuit switching?

Description : What are the advantages and disadvantages of packet switching over circuit switching?

Last Answer : The comparison of packet switching and circuit switching showing advantages and disadvantages of packet switching over circuit switching is given below:

What is a Modem? What is the need of MODEM in data communication? Explain at least one modulation technique used for high speed modems.

Description : What is a Modem? What is the need of MODEM in data communication? Explain at least one modulation technique used for high speed modems.

Last Answer : Modems are essentially used to interface digital circuits to transmit information on analogue channels like telephone systems. Modem (from modulator-demodulator) is a device that modulates an analogue carrier ... caused by the lines makes the detection even harder than amplitude modulation.   

What are the advantages of CCS over in-channel signalling?

Description : What are the advantages of CCS over in-channel signalling?

Last Answer : The advantages of CCS over in-channel signalling are listed below: a. Information can be exchange between the processors much more rapidly than when channel associated signaling is used. b ... for functions other than call processing, for example for maintenance or network management purposes.