A motor pumps water from a well into a tank at the rate of 3000 c.c./sec while another outlet pumps water out of the tank at the rate of 1800 c.c./sec

A motor pumps water from a well into a tank at the rate of 3000 c.c./sec while another outlet pumps water out of the tank at the rate of 1800 c.c./sec
by

1 Answer

Answer :

A motor pumps water from a well into a tank at the rate of 3000 c.c./sec while another outlet ... the motor and outlet are in operation (in minutes).
by
selected by

Related questions

24 pumps are connected to a tank. Some of them are inlet pumps and the others are outlet pumps. Each of the inlet pumps an fill the tank in 16hours and each of the outlet pumps can empty the tank completely in 12hours. If all the pumps are kept open, the empty tank gets filled in 48 hours. How many inlet pumps are there? A) 16 B) 18 C) 17 D) 14

Description : 24 pumps are connected to a tank. Some of them are inlet pumps and the others are outlet pumps. Each of the inlet pumps an fill the tank in 16hours and each of the outlet pumps can empty the tank completely in ... gets filled in 48 hours. How many inlet pumps are there? A) 16 B) 18 C) 17 D) 14

Last Answer : D (x/16)-[(24-x)/12] = 1/48 x/16-24/48+x/12=1/48 (3+4)x/48=97/48 7x/48=97/48 7x=97 X=14

While the oxy-acetylene flame produces a temperature of 3200°C, the temperature produced by oxy-hydrogen flame is about __________ °C. (A) 1800 (B) 2000 (C) 2400 (D) 3000

Description : While the oxy-acetylene flame produces a temperature of 3200°C, the temperature produced by oxy-hydrogen flame is about __________ °C. (A) 1800 (B) 2000 (C) 2400 (D) 3000

Last Answer : (B) 2000

Conversion of dynamic velocity head into static pressure head in a centrifugal pump is the result of : (a) Increasing area of flow between adjacent vanes from inlet to outlet (b) Difference in pressure between suction and delivery ends (c) Radial thrust in pumps (d) Stuffing Box

Description : Conversion of dynamic velocity head into static pressure head in a centrifugal pump is the result of : (a) Increasing area of flow between adjacent vanes from inlet to outlet (b) Difference in pressure between suction and delivery ends (c) Radial thrust in pumps (d) Stuffing Box

Last Answer : (b) Difference in pressure between suction and delivery ends

Two pumps P & Q can fill a tank in 12 mins and 15 mins respectively while a third pipe R can empty the full tank in 6 mins. P & Q kept open for 5 mins in the beginning and then R is also opened. In what time is tank emptied? A) 30mins B) 35mins C) 40mins D) 45 mins

Description : Two pumps P & Q can fill a tank in 12 mins and 15 mins respectively while a third pipe R can empty the full tank in 6 mins. P & Q kept open for 5 mins in the beginning and then R is also opened. In what time is tank emptied? A) 30mins B) 35mins C) 40mins D) 45 mins

Last Answer : D Part filled in 5 min = 5(1/12 +1/15) = 5*9/60 = ¾ Part emptied in 1 min when all the pumps are opened, = 1/6 – (1/12 + 1/15) = 1/6 – 3/20 = 1/60 Now 1/60 is part emptied in 1 min Therefore ¾ part will be emptied in 60 * ¾ = 45 mins

Typical human voice is centered around ________Hz. (A) 200-400 (B) 280-3000 (C) 400-600 (D) 1400-1800

Description : Typical human voice is centered around ________Hz. (A) 200-400 (B) 280-3000 (C) 400-600 (D) 1400-1800

Last Answer : (B) 280-3000

Maximum vertical clearance (VC) for a slab/ girder bridges with discharge above 3000 cumecs is a) 300 mm b) 1500 mm c) 1800 mm* d) 600 mm

Description : Maximum vertical clearance (VC) for a slab/ girder bridges with discharge above 3000 cumecs is a) 300 mm b) 1500 mm c) 1800 mm* d) 600 mm

Last Answer : c) 1800 mm*

In centrifugal pump installation, (A) Pump is properly primed before starting (B) The diameter of the pipe at inlet as well as at outlet, is kept smaller than the delivery pipe (C) The motor may burn out if it is started with empty delivery pipe and with open gate valve (D) All the above

Description : In centrifugal pump installation,  (A) Pump is properly primed before starting  (B) The diameter of the pipe at inlet as well as at outlet, is kept smaller than the delivery pipe  (C) The ... out if it is started with empty delivery pipe and with open gate valve  (D) All the above 

Last Answer : (D) All the above 

What is the speed of sound (m/sec) in ordinary water? (A) 1500 (B) 330 (C) 1000 (D) 3000

Description : What is the speed of sound (m/sec) in ordinary water? (A) 1500 (B) 330 (C) 1000 (D) 3000

Last Answer : (A) 1500

Two observation wells penetrating into a confined aquifer are located 1500 m apart in the direction of flow. Heads of 50 m and 25 m are indicated at these two observation wells. If the coefficient of permeability for the aquifer is 30 m/day and its porosity is 0.25, the time of travel of an inert tracer from one well to another is (a) 75 days (b) 750 days (c) 1200 days (d) 3000 days

Description : Two observation wells penetrating into a confined aquifer are located 1500 m apart in the direction of flow. Heads of 50 m and 25 m are indicated at these two observation wells. If the coefficient of permeability for the ... well to another is (a) 75 days (b) 750 days (c) 1200 days (d) 3000 days

Last Answer : (b) 750 days

A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000

Description : A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000

Last Answer : c. 250

Water is a better coolant than a gas (like CO2 , He, N2 etc.), because it (A) Is a better neutron moderator as well (B) Require comparatively smaller pumps and heat exchanger for a given heat transfer rate (C) Has a better heat transfer characteristics, and it can be pressurised to attain a high temperature (D) All (A), (B) and (C)

Description : Water is a better coolant than a gas (like CO2 , He, N2 etc.), because it (A) Is a better neutron moderator as well (B) Require comparatively smaller pumps and heat exchanger for a given heat transfer rate ... , and it can be pressurised to attain a high temperature (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Three pumps, M, N and O are opened to fill a tank such that M and N can fill the tank alone in 18 min. and 23 min. respectively and O can empty it in 15 min. After 3 minutes the emptying pipe is closed. In how many minutes the tank will be full in this way? A) 20 B) 25 C) 18 D) 12

Description : Three pumps, M, N and O are opened to fill a tank such that M and N can fill the tank alone in 18 min. and 23 min. respectively and O can empty it in 15 min. After 3 minutes the emptying pipe is closed. In how many minutes the tank will be full in this way? A) 20 B) 25 C) 18 D) 12

Last Answer : D Let the tank full in x minutes, then M and N opened for x minutes and O for 3 minutes. (1/18 + 1/23)*x – (1/15)*3 = 1 (23+18/414)X=1+1/5 Solve, x = 12

A tank has two inlet pipes, A and B, which can fill the tank in 12 hours and 18 hours respectively, and an outlet C which can empty the tank in 9 hour

Description : A tank has two inlet pipes, A and B, which can fill the tank in 12 hours and 18 hours respectively, and an outlet C which can empty the tank in 9 hour

Last Answer : A tank has two inlet pipes, A and B, which can fill the tank in 12 hours and 18 hours ... time taken right from the start to fill the tank.

Which one of the following statements regarding septic tanks is wrong? A. A gap of 7.5 cm between the bottom of the covering slab and the top level of scum is provided B. The outlet invert level is kept 5 to 7.5 cm below the inlet invert level C. The minimum width of septic level is 90 cm D. The depth of tank is kept equal to its width

Description : Which one of the following statements regarding septic tanks is wrong? A. A gap of 7.5 cm between the bottom of the covering slab and the top level of scum is provided B. The outlet invert level is kept ... . The minimum width of septic level is 90 cm D. The depth of tank is kept equal to its width

Last Answer : ANS: D

A tank can be filled by a tap in 6 hours and emptied by an outlet pipe in 8 hours. How long will it take to fill the cistern if both the taps are opened together? 1. 24 hours 2. 22 hours 3. 21 hours 4. 18 hours 5. 20 hours

Description : A tank can be filled by a tap in 6 hours and emptied by an outlet pipe in 8 hours. How long will it take to fill the cistern if both the taps are opened together? 1. 24 hours 2. 22 hours 3. 21 hours 4. 18 hours 5. 20 hours

Last Answer : 1;

Faucet A basically used as inlet pipe and Faucet B is used as outlet pipe. Faucet A and B both are opened simultaneously, all the time. When Faucet A fills the tank and Faucet B empty the tank, it will take thrice the time than when both the pipes fill the tank. When Faucet B is used for filling the tank, its efficiency remains constant. What is the ratio of efficiency of Faucet A and Faucet B respectively? a) 1:2 b) 2:1 c) 1:3 d) 3:1

Description : Faucet A basically used as inlet pipe and Faucet B is used as outlet pipe. Faucet A and B both are opened simultaneously, all the time. When Faucet A fills the tank and Faucet B empty the tank, it will take thrice the ... efficiency of Faucet A and Faucet B respectively? a) 1:2 b) 2:1 c) 1:3 d) 3:1

Last Answer : B Efficiency when both pipes used to fill = A + B And efficiency when Faucet A is used to fill and Faucet B is used to empty the tank = A-B So (A+B)/(A-B)=3/1 A/B+1/(A/B-1)=3/1 A/B+1=3(A/B-1) 3A/B-A/B=4 2A/B=4 A/B=2 Thus, the ratio of efficiency of Faucet A and B =2:1

A solid material shows case hardening properties while drying. Which of the following should be controlled to control the drying process? (A) Flow rate of inlet air (B) Relative humidity of outlet air (C) Humidity of inlet air (D) Temperature of the solid

Description : A solid material shows case hardening properties while drying. Which of the following should be controlled to control the drying process? (A) Flow rate of inlet air (B) Relative humidity of outlet air (C) Humidity of inlet air (D) Temperature of the solid

Last Answer : (D) Temperature of the solid

Most of the centrifugal pumps used in chemical plants are usually __________ driven. (A) Steam (B) Diesel engine (C) Electric motor (D) Gas turbine

Description : Most of the centrifugal pumps used in chemical plants are usually __________ driven. (A) Steam (B) Diesel engine (C) Electric motor (D) Gas turbine

Last Answer : (C) Electric motor

A four-pole 60-hertz induction motor has a synchronous speed of 1800 RPM and a slip of 4 percent at full load. What will be its full load speed? A. 1728.0 RPM B. 1730.7 RPM C. 1800.0 RPM D. 1872.0 RPM

Description : A four-pole 60-hertz induction motor has a synchronous speed of 1800 RPM and a slip of 4 percent at full load. What will be its full load speed? A. 1728.0 RPM B. 1730.7 RPM C. 1800.0 RPM D. 1872.0 RPM

Last Answer : Answer: A

An 8 pole wound rotor induction motor operating on 60 Hz supply is driven at 1800 r.p.m. by a prime mover in

Description : An 8 pole wound rotor induction motor operating on 60 Hz supply is driven at 1800 r.p.m. by a prime mover in the opposite direction of revolving magnetic field. The frequency of the rotor current is (a) 30 Hz (b) 60 Hz (c) 120 Hz (d) 180 Hz 

Last Answer : 30 Hz As the frequency of the rotor is given by  F= N*P/120 so from the above equation the frequency of the rotor current can be easily calculated  i.e. 1800×8/120=30 Hence the required value of rotor frequency is 30 Hz

The sewage discharge in a detritus tank of a treatment plant is 576 litres/sec with flow velocity of 0.2 m/sec. If the ratio of width to depth is 2, the depth is A. 100 cm B. 110 cm C. 120 cm D. 150 cm

Description : The sewage discharge in a detritus tank of a treatment plant is 576 litres/sec with flow velocity of 0.2 m/sec. If the ratio of width to depth is 2, the depth is A. 100 cm B. 110 cm C. 120 cm D. 150 cm

Last Answer : ANS: C

For a grit chamber, if the recommended velocity of flow is 0.2 m/sec and detention period is 2 minutes, the length of the tank, is A. 16 m B. 20 m C. 24 m D. 30 m

Description : For a grit chamber, if the recommended velocity of flow is 0.2 m/sec and detention period is 2 minutes, the length of the tank, is A. 16 m B. 20 m C. 24 m D. 30 m

Last Answer : ANS: C

The settling velocity of the particles larger than 0.06 mm in a settling tank of depth 2.4 is 0.33 m per sec. The detention period recommended for the tank, is A. 30 minutes B. 1 hour C. 1 hour and 30 minutes D. 2 hours

Description : The settling velocity of the particles larger than 0.06 mm in a settling tank of depth 2.4 is 0.33 m per sec. The detention period recommended for the tank, is A. 30 minutes B. 1 hour C. 1 hour and 30 minutes D. 2 hours

Last Answer : ANS: D

Can I plug one power adapter into another and then another into that so as to reach a far away appliance that does not have an outlet near it?

Description : Can I plug one power adapter into another and then another into that so as to reach a far away appliance that does not have an outlet near it?

Last Answer : This is not advisable due to fire and flammability concerns. It can be very dangerous to do so.

In a 2280 m race Dinesh beats Aarav by 360 m or 6 seconds. In another race on the same track at the same speeds. Aarav and karthick start at one end while Dinesh starts at the opposite end. How many metres would Aarav have covered ,by the time Dinesh meets karthick given that Dinesh speed is 16 m/sec more than that of karthick a) 1140 m b) 2280 m c) 2460 m d) 1180 m

Description : In a 2280 m race Dinesh beats Aarav by 360 m or 6 seconds. In another race on the same track at the same speeds. Aarav and karthick start at one end while Dinesh starts at the opposite end. How many metres would Aarav ... is 16 m/sec more than that of karthick a) 1140 m b) 2280 m c) 2460 m d) 1180 m

Last Answer : B Aarav 's speed =360/6 =60 m/s Time taken by Aarav to cover 2280 m =2280/60= 38 seconds Dinesh 's speed = 2280/60=38 m/s karthick 's speed = 22m/s Time taken by Dinesh to meet karthick in ... direction: Distance covered by Aarav: =2280/(38+22) =2280/60 =38 seconds =(38*60)m =2280 m

The amount of tetraethyl lead added to improve the octane number of motor gasoline is around __________ c.c per gallon of petrol. (A) 3 (B) 300 (C) 3000 (D) 1000

Description : The amount of tetraethyl lead added to improve the octane number of motor gasoline is around __________ c.c per gallon of petrol. (A) 3 (B) 300 (C) 3000 (D) 1000

Last Answer : (A) 3

A and B entered into a partnership investing Rs. 16000 and Rs. 12000 respectively. After 3 months, A withdrew Rs. 5000 while B invested Rs. 5000 more. After 3 more months C joins the business with a capital of Rs. 21000. The share of B exceeds that of C, out of a total profit of Rs. 26400 after one year by A.Rs. 2400 B.Rs. 3600 C.Rs. 3000 D.Rs. 4800

Description : A and B entered into a partnership investing Rs. 16000 and Rs. 12000 respectively. After 3 months, A withdrew Rs. 5000 while B invested Rs. 5000 more. After 3 more months C joins the business with a capital of Rs. 21000 ... of Rs. 26400 after one year by A.Rs. 2400 B.Rs. 3600 C.Rs. 3000 D.Rs. 4800 

Last Answer : Answer: B (Rs. 3600) Explanation: A:B: C = 16000 x3 + 11000×9:12000 x 3 + 17000 x 9:21000 x 6 = 147:189:126 = 7:9:6 Difference of B and C’s shares = Rs. [26400 x (9/22) — 26400 x (6/22)) = Rs. 3600.

Why is it unsafe to talk on a cell phone while operating gas pumps?

Description : Why is it unsafe to talk on a cell phone while operating gas pumps?

Last Answer : It is unsafe to talk on cell phones while operating gas pumps because sparks can be generated by the battery which leads to ignition of gas fumes. The electronics at the gas station has exposive containment devices. Cell phones do not have these devices.

Who the election of 1800 was important because it was the first time that one had replace another in the power in US?

Description : Who the election of 1800 was important because it was the first time that one had replace another in the power in US?

Last Answer : Need answer

A 6 pole 3-phase wound-rotor induction machine is driven by another machine at 1800 rpm. The rotor of the ...

Description : A 6 pole 3-phase wound-rotor induction machine is driven by another machine at 1800 rpm. The rotor of the induction machine is connected to a 50Hz system. If the mechanical rotation of the rotor is in the same direction as the rotor winding flux rotation, then frequency of the stator voltage will be

Last Answer : A 6 pole 3-phase wound-rotor induction machine is driven by another machine at 1800 rpm. The rotor of the induction machine is connected to a 50Hz system. If the mechanical rotation of ... the same direction as the rotor winding flux rotation, then frequency of the stator voltage will be 140 Hz.

Flexibility of an outlet may be defined as the ratio of the rate of change of : a) Outlet discharge to the rate of change of water level of the parent channel b) Outlet discharge to the rate of change of the discharge of the parent channel c) Parent channel discharge to the rate of the change of the outlet discharge d) Parent channel water level to the rate of the outlet discharge

Description : Flexibility of an outlet may be defined as the ratio of the rate of change of : a) Outlet discharge to the rate of change of water level of the parent channel b) Outlet discharge to the ... of the change of the outlet discharge d) Parent channel water level to the rate of the outlet discharge

Last Answer : b) Outlet discharge to the rate of change of the discharge of the parent channel

. An evaporator while concentrating an aqueous solution from 10 to 40% solids evaporates 30000 kg of water. The amount of solids handled by the system in kg is (A) 4000 (B) 9000 (C) 4600 (D) 3000

Description : . An evaporator while concentrating an aqueous solution from 10 to 40% solids evaporates 30000 kg of water. The amount of solids handled by the system in kg is (A) 4000 (B) 9000 (C) 4600 (D) 3000

Last Answer : (A) 4000

A train, 1800 meters long running at the rate of 204 km/hr will cross a platform in: A) 16 B) 32 C) 45 D) 64

Description : A train, 1800 meters long running at the rate of 204 km/hr will cross a platform in: A) 16 B) 32 C) 45 D) 64 

Last Answer : ANSWER: B  Explanation: Speed of the train = 204 km/hr. We have to find the time in seconds, so convert the speed in the unit of m/sec. Therefore 204 km/hr = 204 x 5/18 m/s  = 1020/18 m/s  Length ... m/sec  Time = distance/speed  = 1800/(1020/18)sec  = (1800*18/1020)sec  = 32 sec (approx.)

Two pipes X and Y can fill a tank in 6 hours and 8 hours respectively while another pipe Z can empty the tank in 4.8 hours. If all the three pipes are

Description : Two pipes X and Y can fill a tank in 6 hours and 8 hours respectively while another pipe Z can empty the tank in 4.8 hours. If all the three pipes are

Last Answer : Two pipes X and Y can fill a tank in 6 hours and 8 hours respectively while another pipe Z can ... then the time in which the tank can be filled.

A tank can be filled by a tap in 8 hrs while it can be emptied by another tap in 18 hrs. if both the taps are opened simultaneously, then after how much time will the cistern get filled? A) 14hrs 24mins B) 14 hrs 12 mins C) 14hrs 56 mins D) 14hrs 30mins

Description : A tank can be filled by a tap in 8 hrs while it can be emptied by another tap in 18 hrs. if both the taps are opened simultaneously, then after how much time will the cistern get filled? A) 14hrs 24mins B) 14 hrs 12 mins C) 14hrs 56 mins D) 14hrs 30mins

Last Answer : A Net part filled in 1hr = (1/8 – 1/18) = 9 – 4/72 = 5/72 Therefore the tank will be filled in 72/5 hrs i.e., 14 hrs 24mins

For the same heat load and mass flow rate in the tube side of a shell and tube heat exchanger, one may use multipass on the tube side, because it (A) Decreases the pressure drop (B) Decreases the outlet temperature of cooling medium (C) Increases the overall heat transfer coefficient (D) None of these

Description : For the same heat load and mass flow rate in the tube side of a shell and tube heat exchanger, one may use multipass on the tube side, because it (A) Decreases the pressure drop (B) ... the outlet temperature of cooling medium (C) Increases the overall heat transfer coefficient (D) None of these

Last Answer : (C) Increases the overall heat transfer coefficient

The ratio of rate of change of the discharge of an outlet to the rate of change of the discharge of distributing channel is called (A) Proportionality (B) Flexibility (C) Setting (D) Sensitivity

Description : The ratio of rate of change of the discharge of an outlet to the rate of change of the discharge of distributing channel is called (A) Proportionality (B) Flexibility (C) Setting (D) Sensitivity

Last Answer : Answer: Option B

While the fuel fired furnace can be used upto a maximum temperature of about 1700°C, the electric furnace can be used upto a temperature of about __________ °C. (A) 2000 (B) 3000 (C) 4500 (D) 6000

Description : While the fuel fired furnace can be used upto a maximum temperature of about 1700°C, the electric furnace can be used upto a temperature of about __________ °C. (A) 2000 (B) 3000 (C) 4500 (D) 6000

Last Answer : (C) 4500

The average monthly salary of directors & office boys of an organization Rs. 3750. Then the average salary of all directors is Rs. 6000 while that of all office boys is Rs. 3000 per month. If there are 120 employees in the organization then find the ratio of manager and office boy. A) 2:5 B) 3:1 C) 1:3 D) 5:2

Description : The average monthly salary of directors & office boys of an organization Rs. 3750. Then the average salary of all directors is Rs. 6000 while that of all office boys is Rs. 3000 per month. If there are 120 employees in the ... find the ratio of manager and office boy. A) 2:5 B) 3:1 C) 1:3 D) 5:2 

Last Answer :  C)  let the number of director be X and office boy be 120-x total salary of director and office boy = 120*3750 = Rs.450000 total salary of director = 6000x total salary of office boy = 3000* (120 - ... director number of office boy = 120-30 = 90 ratio of director to office boy = 30:90 = 1:3

International parcel box rate is a) 1000,1500 & 2500 b) 2000,3000 & 5000 c) 750,1500&2500 d) None of these

Description : International parcel box rate is a) 1000,1500 & 2500 b) 2000,3000 & 5000 c) 750,1500&2500 d) None of these

Last Answer : a) 1000,1500 & 2500

International parcel box rate is a) 1000,1500 & 2500 b) 2000,3000 & 5000 c) 750,1500&2500 d) None of these

Description : International parcel box rate is a) 1000,1500 & 2500 b) 2000,3000 & 5000 c) 750,1500&2500 d) None of these

Last Answer : a) 1000,1500 & 2500

A flywheel on a motor goes from rest to 1000 rpm in 6 sec. The number of revolutions made is nearly equal to (A) 25 (B) 50 (C) 100 (D) 250

Description : A flywheel on a motor goes from rest to 1000 rpm in 6 sec. The number of revolutions made is  nearly equal to  (A) 25  (B) 50  (C) 100  (D) 250 

Last Answer : (B) 50 

Question No. 216 If the specific capacity of a well is 0.3183 × 10-3 per sec, the discharge from a well of 4 m diameter under a depression head of 4 m, is (A) 8 litres/sec (B) 10 litres/sec (C) 12 litres/sec (D) 16 litres/sec

Description : Question No. 216 If the specific capacity of a well is 0.3183 × 10-3 per sec, the discharge from a well of 4 m diameter under a depression head of 4 m, is (A) 8 litres/sec (B) 10 litres/sec (C) 12 litres/sec (D) 16 litres/sec

Last Answer : (D) 16 litres/sec

When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the permeability of the soil, is (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Description : When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the ... (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Last Answer : Answer: Option B

Which of the following canal structures is used to remove surplus water from an irrigation channel into a natural drain? (A) Canal fall (B) Canal outlet (C) Canal escape (D) Canal regulator

Description : Which of the following canal structures is used to remove surplus water from an irrigation channel into a natural drain? (A) Canal fall (B) Canal outlet (C) Canal escape (D) Canal regulator

Last Answer : Answer: Option C

Calculate the power of an electric motor that can lift 800 kg of water to store in a tank at a height of 1500cm in 20s -Physics 9th

Description : Calculate the power of an electric motor that can lift 800 kg of water to store in a tank at a height of 1500cm in 20s -Physics 9th

Last Answer : The power of an electric motor to store the water is 6000 W. Given m= 800 kg, h = 1500 cm = 15 m, g = 10 m/s^2 and t = 20 s. W = 120000 J. P = 6000 W. Thus, the power of an electric motor to store the water is 6000 W.Apr 6, 2016

If the specific gravity of a soil particle of 0.05 cm diameter is 2.67, its terminal velocity while settling in distilled water of viscosity, 0.01 poise, is (A) 0.2200 cm/sec (B) 0.2225 cm/sec (C) 0.2250 cm/sec (D) 0.2275 cm/sec

Description : If the specific gravity of a soil particle of 0.05 cm diameter is 2.67, its terminal velocity while settling in distilled water of viscosity, 0.01 poise, is (A) 0.2200 cm/sec (B) 0.2225 cm/sec (C) 0.2250 cm/sec (D) 0.2275 cm/sec

Last Answer : (D) 0.2275 cm/sec

Pick up the correct statement from the following regarding radial flow centrifugal pumps: (A) These are provided with volute type or turbine type casings (B) In involute type of radial flow centrifugal pump, the impeller discharges into a gradually expanding spiral casing (C) The efficiency of turbine type of radial flow centrifugal pump, is always higher than that of volute type (D) All the above

Description : Pick up the correct statement from the following regarding radial flow centrifugal pumps:  (A) These are provided with volute type or turbine type casings  (B) In involute type of radial flow ... centrifugal pump, is always higher than that of  volute type  (D) All the above 

Last Answer : (D) All the above 

Gasification of the solid fuel converts its organic part into combustible by interaction with air/oxygen and steam so as to obtain a secondary gaseous fuel of high calorific value having no ash. Gasification reactions are normally carried out at about __________ °C. (A) 400-500 (B) 900-1000 (C) 1400-1500 (D) 1700-1800

Description : Gasification of the solid fuel converts its organic part into combustible by interaction with air/oxygen and steam so as to obtain a secondary gaseous fuel of high calorific value having no ash. Gasification reactions are ... __________ °C. (A) 400-500 (B) 900-1000 (C) 1400-1500 (D) 1700-1800

Last Answer : (B) 900-1000