Nozzle consists of components a) Washer b) Vortex plate c) Strainer d) All of the above

Nozzle consists of components a) Washer b) Vortex plate c) Strainer d) All of the above
by

1 Answer

Answer :

All of the above
by

Related questions

The conventional type of Mower consists of which of the following a) Wearing Plate b) Nozzle c) Air Chamber d) None of the above

Description : The conventional type of Mower consists of which of the following a) Wearing Plate b) Nozzle c) Air Chamber d) None of the above

Last Answer : Wearing Plate

It is the part of cone nozzle which imparts rotation to the liquid. b. Cone plate c. Round plate d. None of above

Description : It is the part of cone nozzle which imparts rotation to the liquid. b. Cone plate c. Round plate d. None of above

Last Answer : Ans- a. Swirl plate

Basic components of sprayer is a) Nozzle body b) Spray boom c) Nozzle cap d) All of the above

Description : Basic components of sprayer is a) Nozzle body b) Spray boom c) Nozzle cap d) All of the above

Last Answer : All of the above

Basic components of sprayer. a. Nozzle body b. Nozzle boss c. Filter d. Spray gun e. All of the above

Description : Basic components of sprayer. a. Nozzle body b. Nozzle boss c. Filter d. Spray gun e. All of the above

Last Answer : All of the above

What Is Strainer?

Description : What Is Strainer?

Last Answer : Strainer is a control element to arrest dust from flowing fluids.

Which of the following instruments is used to measure flow on the application of Bernoulli's theorem? (A) Venturimeter (B) Orifice plate (C) Nozzle (D) All of the above

Description : Which of the following instruments is used to measure flow on the application of Bernoulli's theorem? (A) Venturimeter (B) Orifice plate (C) Nozzle (D) All of the above

Last Answer : Answer: Option D

swirl plate in the cone nozzle is provided to. a. Impart rotational motion to the liquid passing through it. b. To increase the droplet size. c. To decrease the droplet size. d. To increase the spray angle.

Description : swirl plate in the cone nozzle is provided to. a. Impart rotational motion to the liquid passing through it. b. To increase the droplet size. c. To decrease the droplet size. d. To increase the spray angle.

Last Answer : a. Impart rotational motion to the liquid passing through it.

Under what condition a convergent divergent nozzle required ?

Description : Under what condition a convergent divergent nozzle required ?

Last Answer : When pressure ratio is greater than critical pressure ratio.

Under what circumstances would there be an increase in pressure in a diver¬gent nozzle ?

Description : Under what circumstances would there be an increase in pressure in a diver¬gent nozzle ?

Last Answer : For subsonic flow at inlet section of a diffuser a lower velocity and higher pressure will exist at the exit section. For supersonic isentropic flow at the inlet section a higher velocity and lower pressure ... if a shock wave occurs in the diffuser then a higher pressure will exist at the exit.

What is the effect of friction on flow of steam through a nozzle ?

Description : What is the effect of friction on flow of steam through a nozzle ?

Last Answer : To decrease both mass flow rate and wetness of steam.

When maximum discharge is obtained in nozzle ?

Description : When maximum discharge is obtained in nozzle ?

Last Answer : At the critical pressure ratio.

Name of instrument used for testing of spray nozzle a) Patternator b) Aerometer c) Galvanometer d) Piezometer Ans. a

Description : Name of instrument used for testing of spray nozzle a) Patternator b) Aerometer c) Galvanometer d) Piezometer Ans. a

Last Answer : ans a

In a sprayer overlapping can be increased by increasing a) Nozzle diameter b) Pressure c) Discharge d) Height of nozzle Ans. d

Description : In a sprayer overlapping can be increased by increasing a) Nozzle diameter b) Pressure c) Discharge d) Height of nozzle Ans. d

Last Answer : ans d

A flat fan nozzle is suitable for a) Foliage spray b) Insect control c) Spot spray d) Herbicide spray

Description : A flat fan nozzle is suitable for a) Foliage spray b) Insect control c) Spot spray d) Herbicide spray

Last Answer : ans d

Fan nozzle mostly used for pressure spraying. b. high c. moderate d. None of above

Description : Fan nozzle mostly used for pressure spraying. b. high c. moderate d. None of above

Last Answer : Ans- b. low

. Fan nozzle forms narrow. spray pattern. a. large c. Straight. d. None of above

Description : . Fan nozzle forms narrow. spray pattern. a. large c. Straight. d. None of above

Last Answer : Ans- b. elliptical.

Hallow cone nozzle – liquid is fed into whirl chamber through entry or through a fixed spiral passage to give rotation motion. a. Axial b. Radial c. tangential. d. None of above

Description : Hallow cone nozzle – liquid is fed into whirl chamber through entry or through a fixed spiral passage to give rotation motion. a. Axial b. Radial c. tangential. d. None of above

Last Answer : Ans- c. tangential.

nozzle which forms narrow elliptical spray pattern. a) Hollow cone nozzle b) Hard cone nozzle c) Solid cone nozzle d) Fan nozzle

Description : nozzle which forms narrow elliptical spray pattern. a) Hollow cone nozzle b) Hard cone nozzle c) Solid cone nozzle d) Fan nozzle

Last Answer : Fan nozzle

Nozzle diameter of hand atomizer is between ………… to ………… a. 0.7 – 1.5. c. 1.1- 1.5 b. 0.6 – 1.6. d 0.8 to 1.8

Description : Nozzle diameter of hand atomizer is between ………… to ………… a. 0.7 – 1.5. c. 1.1- 1.5 b. 0.6 – 1.6. d 0.8 to 1.8

Last Answer :  0.6 – 1.6.

Component to remove suspended matter large than a predetermined size from fluid. a. Relief valve. c. Filter b. Spray gun. d. Nozzle

Description : Component to remove suspended matter large than a predetermined size from fluid. a. Relief valve. c. Filter b. Spray gun. d. Nozzle

Last Answer : Filter

is the minimum pressure required for operating a nozzle in desirable condition a) 1 kg/cm b) 1.5kg/cm c) 2 kg/cm d) 2.5kg/cm

Description : is the minimum pressure required for operating a nozzle in desirable condition a) 1 kg/cm b) 1.5kg/cm c) 2 kg/cm d) 2.5kg/cm

Last Answer : 1.5kg/cm

is the types of nozzle used in sprayers a) Hollow cone type of nozzle b) Solid cone type nozzle c) Fan type nozzle d) All of the above

Description : is the types of nozzle used in sprayers a) Hollow cone type of nozzle b) Solid cone type nozzle c) Fan type nozzle d) All of the above

Last Answer : All of the above

Junior hoe consist of and attached to the framework with hinge arrangement a) Reversible showers, nozzle body b) Reversible shovels, curved tynes c) Reversible shovels, curved tyres d) Pressure regulator, spray lance

Description : Junior hoe consist of and attached to the framework with hinge arrangement a) Reversible showers, nozzle body b) Reversible shovels, curved tynes c) Reversible shovels, curved tyres d) Pressure regulator, spray lance

Last Answer : Reversible shovels, curved tynes

In the natural draft cooling tower_________ is not required a) Fan b) tower c) Nozzle d) none of the above

Description : In the natural draft cooling tower_________ is not required a) Fan b) tower c) Nozzle d) none of the above

Last Answer : Fan

Open system usually encloses which of the following devices?  A. Compressor  B. Turbine  C. Nozzle  D. All of the above

Description : Open system usually encloses which of the following devices?  A. Compressor  B. Turbine  C. Nozzle  D. All of the above

Last Answer : All of the above

What tools do I need to take down my kitchen strainer basket?

Description : What tools do I need to take down my kitchen strainer basket?

Last Answer : answer:Welcome to Fluther. Yeah, that looks like hell, all right. Depending on the amount of corrosion there, and whether it has affected the sink itself, you may need to plan on replacing the sink, ... installation we're looking at, then we wouldn't be looking at it. This joint should never leak.

Does anyone else detest it when noodles get stuck in your strainer?

Description : Does anyone else detest it when noodles get stuck in your strainer?

Last Answer : True. It makes me forget about the economy, my medical insurance increases, the cost of heating my house this winter, and Lyme ticks.

Who invented the strainer?

Description : Who invented the strainer?

Last Answer : New York tea merchant William Sullivan invented the tea strainerin 1908. It put his tea samples in silk and strained the tea.

I need to buy a strainer basket to go in my pump and I have called and went to a local pool place and cant find where to buy one can you help me out with parts Thanks Leesa?

Description : I need to buy a strainer basket to go in my pump and I have called and went to a local pool place and cant find where to buy one can you help me out with parts Thanks Leesa?

Last Answer : PoolCenter.com has pool strainers and many other parts you might find useful.

Traces of liquid tar fog present in coke oven gas is separated using (A) Electrostatic precipitator (B) Cyclone separator (C) Strainer (D) None of these

Description : Traces of liquid tar fog present in coke oven gas is separated using (A) Electrostatic precipitator (B) Cyclone separator (C) Strainer (D) None of these

Last Answer : (A) Electrostatic precipitato

__________ employs a set of screen across a flow channel for the separation of dirt/rust from a flowing liquid stream. (A) Thickener (B) Classifier (C) Strainer (D) Clarifier

Description : __________ employs a set of screen across a flow channel for the separation of dirt/rust from a flowing liquid stream. (A) Thickener (B) Classifier (C) Strainer (D) Clarifier

Last Answer : (C) Strainer

The strainer type tube well, is unsuitable for (A) Coarse gravels (B) Fine sandy strata (C) Clean gravels (D) None of these

Description : The strainer type tube well, is unsuitable for (A) Coarse gravels (B) Fine sandy strata (C) Clean gravels (D) None of these

Last Answer : (B) Fine sandy strata

Abyssinian tube well is a special type of (A) Slotted type wells (B) Cavity type wells (C) Strainer type well (D) None of these

Description : Abyssinian tube well is a special type of (A) Slotted type wells (B) Cavity type wells (C) Strainer type well (D) None of these

Last Answer : (C) Strainer type well

A strainer type well sunk through three previous layers intervened by three impervious aquicludes, draws water from (A) Top most pervious layer (B) Central pervious layer (C) Lowest pervious layer (D) All the pervious layer

Description : A strainer type well sunk through three previous layers intervened by three impervious aquicludes, draws water from (A) Top most pervious layer (B) Central pervious layer (C) Lowest pervious layer (D) All the pervious layer

Last Answer : (D) All the pervious layers

The most important and widely used tube well in India, is (A) Strainer well (B) Cavity well (C) Slotted well (D) Perforated pipe well

Description : The most important and widely used tube well in India, is (A) Strainer well (B) Cavity well (C) Slotted well (D) Perforated pipe well 

Last Answer : (A) Strainer well 

Pick up the incorrect statement from the following: (A) The flow in strainer type wells is radial (B) The flow in cavity type wells in spherical(C) In strainer type wells, area of flow depends upon the length of the strainer pipe (D) In cavity type wells, area of flow depends upon the size of the cavity

Description : Pick up the incorrect statement from the following:  (A) The flow in strainer type wells is radial  (B) The flow in cavity type wells in spherical  (C) In strainer type wells, area of flow ... pipe  (D) In cavity type wells, area of flow depends upon the size of the cavity 

Last Answer : (C) In strainer type wells, area of flow depends upon the length of the strainer pipe 

Shrouding' is essentially provided in (A) Strainer type wells (B) Cavity type wells (C) Slotted type well (D) All the above

Description : Shrouding' is essentially provided in  (A) Strainer type wells  (B) Cavity type wells  (C) Slotted type well  (D) All the above 

Last Answer : (C) Slotted type well 

Shrouding is provided in (A) Cavity type tube wells (B) Slotted type tube wells (C) Strainer type tube wells (D) Perforated type tube wells

Description : Shrouding is provided in (A) Cavity type tube wells (B) Slotted type tube wells (C) Strainer type tube wells (D) Perforated type tube wells

Last Answer : Answer: Option B

If h is the loss due to friction in a pipe. Total losses in strainer and bends may be taken as (A) 0.01 h (B) 0.45 h (C) 0.20 h (D) 0.25 h

Description : If h is the loss due to friction in a pipe. Total losses in strainer and bends may be taken as (A) 0.01 h (B) 0.45 h (C) 0.20 h (D) 0.25 h

Last Answer : Answer: Option D

the loss due to friction in pipes is 4 m, the total losses in strainer and bends may be taken as (A) 0.10 m (B) 0.20 m (C) 0.5 m (D) 1.0 m

Description : the loss due to friction in pipes is 4 m, the total losses in strainer and bends may be taken as (A) 0.10 m (B) 0.20 m (C) 0.5 m (D) 1.0 m

Last Answer : Answer: Option D

Who can teach me how to find the Volume number and Issue number of “Numerical simulation of three dimensional cavitation shedding dynamics with special emphasis on cavitation–vortex interaction”?

Description : Who can teach me how to find the Volume number and Issue number of “Numerical simulation of three dimensional cavitation shedding dynamics with special emphasis on cavitation–vortex interaction”?

Last Answer : Google it. \ http://www.sciencedirect.com/science/article/pii/S0029801814001838

Is "Polar Vortex" a new term to stoke up weather hysteria?

Description : Is "Polar Vortex" a new term to stoke up weather hysteria?

Last Answer : 20 years from now it will be called a “Solar Ice Stream”.

Explain the difference between vortex friction and vortex friction ?

Description : Explain the difference between vortex friction and vortex friction ?

Last Answer : The friction that occurs when an object tries to slip or rub on the surface of another object, that is, when it moves, and the friction that acts against the motion when an object rolls ... to cyclic friction. Undoubtedly, the value of rotational friction is much lower than that of bismuth friction.

Is the vortex on the same side everywhere in the world?

Last Answer : we learned that at school, but I wasn't anywhere to verify it, so I can only believe it ...

What is a good science fair project hypothesis using tornado vortex aka tornado in a bottle?

Description : What is a good science fair project hypothesis using tornado vortex aka tornado in a bottle?

Last Answer : Need answer

The current spell of cold wave in the US has been a fall out of the : (1) polar vortex (2) biodiversity and habitats (3) climate and energy (4) political administration

Description : The current spell of cold wave in the US has been a fall out of the : (1) polar vortex (2) biodiversity and habitats (3) climate and energy (4) political administration

Last Answer : (1) polar vortex Explanation: The 2013-14 North American cold wave was caused by southward shifts of the North Polar Vortex. On December 1, 2013, the weakening of the polar vortex led to the beginning of an abnormally cold trend in the Eastern and Central United States.

During agitation of liquids, the (A) Froude number is independent for the curves between power number and Reynolds number in baffled system (B) Power number becomes independent of impellers Reynolds number at high Reynolds number, but is dependent on the geometry of the impeller (C) Froude number is used to account for the effect of surface (e.g., the centre vortex) on the power number (D) All (A), (B) and (C)

Description : During agitation of liquids, the (A) Froude number is independent for the curves between power number and Reynolds number in baffled system (B) Power number becomes independent of impellers Reynolds number at high Reynolds number, ... , the centre vortex) on the power number (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation (B) Cavitation may be caused due to boiling of liquid by decreasing the pressure resulting in formation & collapse of vapor cavities (C) Cavitation begins at higher static pressure and lower velocity in larger diameter pipelines resulting in audible noise(D) Large scale cavitation cannot damage pipeline, restrict fluid flow anddamage steam turbine blades

Description : Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation ... (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Last Answer : (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Baffles in mixing tanks are provided to (A) Reduce swirling and vortex formation (B) Increase the structural strength of the tank (C) Aid in rotational flow (D) None of these

Description : Baffles in mixing tanks are provided to (A) Reduce swirling and vortex formation (B) Increase the structural strength of the tank (C) Aid in rotational flow (D) None of these

Last Answer : (A) Reduce swirling and vortex formation

Pick out the correct statement. (A) A forced vortex occurs when fluid rotates as a solid about an axis (B) In laminar flow, Newton's law of viscosity does not apply (C) A free vortex occurs, when fluid rotates as a solid (D) In turbulent flow, there are neither cross-currents nor eddies

Description : Pick out the correct statement. (A) A forced vortex occurs when fluid rotates as a solid about an axis (B) In laminar flow, Newton's law of viscosity does not apply (C) A free vortex occurs, when fluid rotates as a solid (D) In turbulent flow, there are neither cross-currents nor eddies

Last Answer : (A) A forced vortex occurs when fluid rotates as a solid about an axis