Ans - b. twice
Description : Identify the following figure- a. Offset disc harrow. c. Single action disc harrow b. Double action disc harrow d. Tandem disc harrow
Last Answer : Single action disc harrow
Description : Types of double action disc harrow A) Tandem disc harrow. C ) None B) Off-set disc harrow. D) Both A and B
Last Answer : Both A and B
Description : harrow consist of two gangs placed end to end. A) Single action disc harrow B) Double action disc harrow C) Triple action disc harrow D) None above
Description : In single action harrow two gangs placed end to end, which through the soil in directions. b. Same c. Diagonal d. None of the above
Last Answer : Ans - a. Opposite
Description : The is also used for forming field or channels. A. Bunds. C. Ridger B. Harrow. D. None of the above.
Last Answer : Ridger
Description : is a harrow which perform harrow operation by means of set or a number of sets of rotating slat each set being mounted on common shaft. a. Spike tooth harrow c. Triangular harrow b. Acme harrow. d. Disc harrow
Last Answer : Disc harrow
Description : Tandem disc Harrow is a disc Harrow comprising of four gangs in which each gang can be angle in… direction. a. Angular c. Parallel b. Opposite. d. Perpendicular
Last Answer : Opposite
Description : Penetration of a trailed type disc harrow is not affected by a) Size of disc b) Angle of disc c) Weight of disc d) Tractor hydraulic system Ans. d
Last Answer : Ans. d
Description : The penetration of a tandem disc harrow can be increased by a) Increasing tilt angle b) Increasing disc angle c) Increasing disc diameter d) All of the above Ans.c
Last Answer : Ans.c
Description : The two primary tillage equipments are 1. MB and disc harrow 2. Disc plough and disc harrow 3. Disc harrow and cultivator 4. MB and subsoiler
Last Answer : ans 4
Description : Dead furrow is made by 1. One way MB plough 2. 2 way MB plough 3. ridger 4. disc harrow
Last Answer : ans 1
Description : Which of the following is not a tractor drawn primary tillage tool? 1. Disc plough 2. rotavator 3. Country plough 4. Bar harrow
Last Answer : ans 3
Description : Which one of the following is not a secondary tillage tool? 1. Disc Plough 2. Disc harrow 3. Mould Board 4. none of these
Description : Which of the following is not a tractor drawn tillage tool? 1. Cultivator 2. Augar plough 3. Harrow 4. Plank
Description : has amplitude of vibration is 200mm and frequency of operation is 400 cycle/ sec. b. Acme tooth harrow c. Blade harrow d. None of the above
Last Answer : Ans- a. Reciprocating power harrow
Description : and guntaka are used prepare the seed bed mostly in clay soils. a. Spring tooth harrow b. Acme tooth harrow d. None of the above
Last Answer : Ans - c. Blade harrow
Description : The spike teeth are in Triangular harrow. a. Movable b. Adjustable d. None of the above
Last Answer : Ans - c. fixed
Description : It is a wooden plank used for smoothening the soil and crushing the weed. a. Spring tooth harrow b. Acme tooth harrow d. None of the above
Last Answer : Ans - c. Patela
Description : is also called as knife harrow. a. Spring tooth harrow c. Fixed tooth harrow d. None of the above
Last Answer : Ans - b.Acme tooth harrow
Description : used in the soil when obstruction like stone, roots and weed are hidden below the ground surface. b. a. Straight tooth harrow c. a. Fixed tooth harrow d. None
Last Answer : Ans - a. Spring tooth harrow
Description : This type of harrow suitable to work in hard and stony soils. b. a. Straight tooth harrow c. a. Fixed tooth harrow d. None of the above.
Description : in disc harrow, It prevents disc from clogging. a. Feeder c.Jointer d. None of the above.
Last Answer : Ans - b. Spacer
Description : Harrow, patella, Guntaka, Bund former, Ridger, Puddler, leveller and cultivator are the tillage implements. a. Primary c. post d. None of the above
Last Answer : Ans - b. Secondary
Description : Harrow is a tillage implement that cuts the soil to shallow depth for smoothening and pulverizing the soil as well as to cut weeds and to mix the materials with the soil. a. Primary. c. Tertiary b. Secondary. d. None
Last Answer : Secondary
Description : Blade harrow is also named as i. Guntaka. c) Ridger ii. Bakhar. d) Bund
Last Answer : Bakhar
Description : harrow having curved knives. i. Spring tooth harrow. c) Acme harrow ii. Spikal tooth d) Spike tooth harrow
Last Answer : Acme harrow
Description : A lever, which operates the gang mechanism of the disk harrow, is called the i. Spanners lever. c) spacer lever ii. Gang control lever. d) Bearing lever
Last Answer : Gang control lever
Description : Singal acting disk harrow throw the soil in direction. i. Opposite. c) left ii. Backward d) right
Description : are used to hold water in the soil. A. Bunds. C. Harrow B. Ridger. D. None of the above
Last Answer : Bunds
Description : The power tiller harrow is a mounted reciprocating comb type. A. Rear C. Right B. Front. D. None of the above
Last Answer : rear
Description : The two primary tillage equipments are A. MB and disc harrow B. Disc plough and disc harrow C. Disc harrow and cultivator. D. MB and. Subscriber
Last Answer : MB and disc harrow
Description : Dead furrow is made by A. One way MB plough. B. 2 way MB plough C. Ridger. D. Disc harrow
Last Answer : One way MB plough
Description : harrow which consist of one or more blades attached to the beam Or frame, used for shallow working of the soil. A Spike tooth harrow B Acme harrow C Spring tooth harrow D Blade harrow
Last Answer : Blade harrow
Description : it is made of wooden plank used for smoothing the soil and crushing the Weeds . A) Triangular harrow C Blade harrow B) Patela D Guntaka
Last Answer : Patela
Description : it is a harrow with peg shaped teeth of diamond cross section to a Rectangular frame. A) Spike tooth harrow C Spring tooth harrow B) Acme harrow D Triangular harrow.
Last Answer : Spike tooth harrow
Description : Harrow is secondary tillage implement used to cut soil to shallow depth for _ and A) smoothening. C) none of the above B) pulverizing. D) both
Last Answer : both
Description : is not a tractor drawn tillage tool: a) Cultivator c) Augar plough b) Harrow d) Plank
Last Answer : Plank
Description : The gang angle of disc harrow is adjusted in the range of: a) 0-30 c) 30-60 b) 60-90 d) Above 90
Last Answer : B
Description : In disc harrow, the penetration of disc improves by: a) Increasing disc angle c) Lowering hitch point b) Regulating optimum speed d) All are correct
Last Answer : Increasing disc angle
Description : . A Vertical disc plough is also termed as: a) Wheat plough c) Harrow plough b) Both (a) & (b) d) None of these
Last Answer : Both (a) & (b)
Description : Jointer and coulter are the parts of :- A. Disc plough C. Indigenous plough B. Harrow plough D. MB plough
Last Answer : MB plough
Description : are the primary tillage implements. A. Chisel plough and sub soiler C. Disc plough and disc harrow B. Chisel plough and disc harrow D. Leveler and clad crusher
Last Answer : Chisel plough and sub soiler
Description : is the following is not a secondary tillage tool A. Disc plough C. Mould board B. Disc harrow D. None of the above
Last Answer : disk harrow is secondry implement and mb plough and disk plouhg will be primarry implement
Description : n single action disc harrow the two gangs are at set single a) less than 90 degree b) at 90 degree c) greater than 90 degree d) at 180 degree
Last Answer : c) greater than 90 degree
Description : Which of the following partners is least likely to be considered a "covered member" for purposes of rendering assurance service to of Company A, a nonaudit client, performed by the ... assurance engagement in previous years, but currently has no responsibilities with respect to the engagement
Last Answer : A partner in the Cebu office of the CPA firm who maintains a small, immaterial investment in Company A.
Description : Ridger is also known as riding plough and moulds board plough. a. Single c. Half d. None of the above. Ans - b. Double
Last Answer : Ans - b. Double
Description : .Laying out of field in lands is essential when working with a. Two way plough b. One way plough c. Disc harrow d. Cultivator
Last Answer : b. One way plough
Description : A taxi driver make a trip from the plains to ooty which are 340km apart at an average speed of 60km/hr. In the return trip, he covers the speed distance at an average of 30 km/hr. the average speed of the taxi over the entire distance of 680 km is a) 30 b) 40 c) 50 d) 60
Last Answer : B Average speed =(2xy/( x+y)) km/hr Given x =60 km/hr y = 30km/hr Average speed = (2*60*30/ (60+30)) km/hr =(3600/ 90) =40 km/hr
Description : kajal rides his scooter 14km at an average speed of 16 km/hr and again travels 16km at an average speed of 14 km/hr. What is her average speed for the entire trip approximately? a) 15.36 km/hr b) 17.46 km/hr c) 13.56 km/hr d) 14.86 km/hr
Last Answer : D Total distance travelled =14+16=30Km Time taken to travel 14 km at an average speed of 16 km/hr =14/16=7/8 Hr Time taken to travel 16 km at an average speed of 14 km/hr =16/14=8/7 hr Total time taken = ... /Total time taken =30/(7/8+8/7) =30/(113/56) =30*56/113=1680/113 =14.86 km/hr