harrow which consist of one or more blades attached to the beam Or frame, used for shallow working of the soil. A Spike tooth harrow B Acme harrow C Spring tooth harrow D Blade harrow

harrow which consist of one or more blades attached to the beam Or frame, used for shallow working of the soil. A Spike tooth harrow B Acme harrow C Spring tooth harrow D Blade harrow
by

1 Answer

Answer :

Blade harrow
by

Related questions

it is a harrow with peg shaped teeth of diamond cross section to a Rectangular frame. A) Spike tooth harrow C Spring tooth harrow B) Acme harrow D Triangular harrow.

Description : it is a harrow with peg shaped teeth of diamond cross section to a Rectangular frame. A) Spike tooth harrow C Spring tooth harrow B) Acme harrow D Triangular harrow.

Last Answer : Spike tooth harrow

harrow having curved knives. i. Spring tooth harrow. c) Acme harrow ii. Spikal tooth d) Spike tooth harrow

Description : harrow having curved knives. i. Spring tooth harrow. c) Acme harrow ii. Spikal tooth d) Spike tooth harrow

Last Answer : Acme harrow

is also called as knife harrow. a. Spring tooth harrow b. Acme harrow c. Spike tooth harrow d. none of the above

Description : is also called as knife harrow. a. Spring tooth harrow b. Acme harrow c. Spike tooth harrow d. none of the above

Last Answer : Ans:- b. Acme harrow

is a harrow which perform harrow operation by means of set or a number of sets of rotating slat each set being mounted on common shaft. a. Spike tooth harrow c. Triangular harrow b. Acme harrow. d. Disc harrow

Description : is a harrow which perform harrow operation by means of set or a number of sets of rotating slat each set being mounted on common shaft. a. Spike tooth harrow c. Triangular harrow b. Acme harrow. d. Disc harrow

Last Answer :  Disc harrow

has amplitude of vibration is 200mm and frequency of operation is 400 cycle/ sec. b. Acme tooth harrow c. Blade harrow d. None of the above

Description : has amplitude of vibration is 200mm and frequency of operation is 400 cycle/ sec. b. Acme tooth harrow c. Blade harrow d. None of the above

Last Answer : Ans- a. Reciprocating power harrow

It is a wooden plank used for smoothening the soil and crushing the weed. a. Spring tooth harrow b. Acme tooth harrow d. None of the above

Description : It is a wooden plank used for smoothening the soil and crushing the weed. a. Spring tooth harrow b. Acme tooth harrow d. None of the above

Last Answer : Ans - c. Patela

and guntaka are used prepare the seed bed mostly in clay soils. a. Spring tooth harrow b. Acme tooth harrow d. None of the above

Description : and guntaka are used prepare the seed bed mostly in clay soils. a. Spring tooth harrow b. Acme tooth harrow d. None of the above

Last Answer : Ans - c. Blade harrow

Implements commonly used in dry farming areas a). Sweep b). Blade harrow c). Spike tooth harrow d). Both a and b

Description : Implements commonly used in dry farming areas a). Sweep b). Blade harrow c). Spike tooth harrow d). Both a and b

Last Answer : d). Both a and b

This type threasher consist of spike tooth cylinder, woven wire mesh concave and upper casing provide with helical louvers. a. Hammer mill c. Dummy d. None of above

Description : This type threasher consist of spike tooth cylinder, woven wire mesh concave and upper casing provide with helical louvers. a. Hammer mill c. Dummy d. None of above

Last Answer : Ans-    b. Axial flow

Blind hoeing with bullock/tractor drawn spike-tooth harrow successfully controls weeds in a). Potato b). Sugarcane c). Maize d). Both a and b

Description : Blind hoeing with bullock/tractor drawn spike-tooth harrow successfully controls weeds in a). Potato b). Sugarcane c). Maize d). Both a and b

Last Answer : d). Both a and b

it is made of wooden plank used for smoothing the soil and crushing the Weeds . A) Triangular harrow C Blade harrow B) Patela D Guntaka

Description : it is made of wooden plank used for smoothing the soil and crushing the Weeds . A) Triangular harrow C Blade harrow B) Patela D Guntaka

Last Answer : Patela 

Harrow is a tillage implement that cuts the soil to shallow depth for smoothening and pulverizing the soil as well as to cut weeds and to mix the materials with the soil. a. Primary. c. Tertiary b. Secondary. d. None

Description : Harrow is a tillage implement that cuts the soil to shallow depth for smoothening and pulverizing the soil as well as to cut weeds and to mix the materials with the soil. a. Primary. c. Tertiary b. Secondary. d. None

Last Answer : Secondary

Harrow is secondary tillage implement used to cut soil to shallow depth for _ and A) smoothening. C) none of the above B) pulverizing. D) both

Description : Harrow is secondary tillage implement used to cut soil to shallow depth for _ and A) smoothening. C) none of the above B) pulverizing. D) both

Last Answer : both 

is also called as knife harrow. a. Spring tooth harrow c. Fixed tooth harrow d. None of the above

Description : is also called as knife harrow. a. Spring tooth harrow c. Fixed tooth harrow d. None of the above

Last Answer : Ans - b.Acme tooth harrow

shaped blades are best suited for i. Minimum tillage of trashy land at shallow depths j. Dried hard soils k. Cutting and pulverisation in wet sticky clay soil l. Working under normal field conditions

Description : shaped blades are best suited for i. Minimum tillage of trashy land at shallow depths j. Dried hard soils k. Cutting and pulverisation in wet sticky clay soil l. Working under normal field conditions

Last Answer : i. Minimum tillage of trashy land at shallow depths

Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions

Description : Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions

Last Answer : f. Dried hard soils

The spike teeth are in Triangular harrow. a. Movable b. Adjustable d. None of the above

Description : The spike teeth are in Triangular harrow. a. Movable b. Adjustable d. None of the above

Last Answer : Ans - c. fixed

used in the soil when obstruction like stone, roots and weed are hidden below the ground surface. b. a. Straight tooth harrow c. a. Fixed tooth harrow d. None

Description : used in the soil when obstruction like stone, roots and weed are hidden below the ground surface. b. a. Straight tooth harrow c. a. Fixed tooth harrow d. None

Last Answer : Ans - a. Spring tooth harrow

Blade harrow is also named as i. Guntaka. c) Ridger ii. Bakhar. d) Bund

Description : Blade harrow is also named as i. Guntaka. c) Ridger ii. Bakhar. d) Bund

Last Answer : Bakhar

Following is not type of blades ? a) ‗L‘ type blade. c) Twisted blade b) ‗M‘ type blade. d) Straight blade

Description : Following is not type of blades ? a) ‗L‘ type blade. c) Twisted blade b) ‗M‘ type blade. d) Straight blade

Last Answer : M‘ type blade.

The following types of blades are used with the rotor in rotary tiller a. ‗L‘ type blade c) both A & B b. Twisted blade d) chisel plough

Description : The following types of blades are used with the rotor in rotary tiller a. ‗L‘ type blade c) both A & B b. Twisted blade d) chisel plough

Last Answer :  both A & B

Curved twisted blades are specially suited for m. Minimum tillage of trashy land at shallow depths n. Dried hard soils o. Cutting and pulverisation in wet sticky clay soil p. For operating on the sides of plant bed

Description : Curved twisted blades are specially suited for m. Minimum tillage of trashy land at shallow depths n. Dried hard soils o. Cutting and pulverisation in wet sticky clay soil p. For operating on the sides of plant bed

Last Answer : p. For operating on the sides of plant bed

harrow consist of two gangs placed end to end. A) Single action disc harrow B) Double action disc harrow C) Triple action disc harrow D) None above

Description : harrow consist of two gangs placed end to end. A) Single action disc harrow B) Double action disc harrow C) Triple action disc harrow D) None above

Last Answer : Single action disc harrow

The two types of cylinders used on power wheat threshers are 1. Serrated disc and rasp bar 2. Spike tooth and wire loop type 3. Spike tooth and hammer mill 4. hammer mill and flails

Description : The two types of cylinders used on power wheat threshers are 1. Serrated disc and rasp bar 2. Spike tooth and wire loop type 3. Spike tooth and hammer mill 4. hammer mill and flails

Last Answer : ans 3

This type thresher consists of beater mounted on a shaft which rotates inside a closed casing and concave. a. Hammer mill b. Spike tooth d. None of above

Description : This type thresher consists of beater mounted on a shaft which rotates inside a closed casing and concave. a. Hammer mill b. Spike tooth d. None of above

Last Answer : Ans-                             c. Dummy

In threshers what are mounted on the periphery of the cylinder A) Spike tooth type B) Raspbar type C) Syndicator type D) Wire loob type.

Description : In threshers what are mounted on the periphery of the cylinder A) Spike tooth type B) Raspbar type C) Syndicator type D) Wire loob type.

Last Answer : Spike tooth type

A multi type thresher is equipped with a) Spike tooth cylinder b) Rasp bar cylinder c) Hammer mill cylinder d) All of the above

Description : A multi type thresher is equipped with a) Spike tooth cylinder b) Rasp bar cylinder c) Hammer mill cylinder d) All of the above

Last Answer : All of the above

The dummy type thresher is also termed as a) Rasp bar type thresher b) Hammer mill type thresher c) Spike tooth type thresher d) Syndicator tooth type thresher

Description : The dummy type thresher is also termed as a) Rasp bar type thresher b) Hammer mill type thresher c) Spike tooth type thresher d) Syndicator tooth type thresher

Last Answer : Hammer mill type thresher

Identify the picture. a) Hummer mill type b) Spike-tooth type c) Dummy type d) Axial flow type

Description : Identify the picture. a) Hummer mill type b) Spike-tooth type c) Dummy type d) Axial flow type

Last Answer : Hummer mill type

are mounted on the Periphery of a cylinder that rotates inside a closed casing and concave. a) Dummy type c) spike-tooth type b) Hummer type d) Axial flow type

Description : are mounted on the Periphery of a cylinder that rotates inside a closed casing and concave. a) Dummy type c) spike-tooth type b) Hummer type d) Axial flow type

Last Answer : spike-tooth type

t consists of spike tooth cylinder, woven- wire mesh concave and upper casing provided with helical concave. a) Dummy type c) Spike-tooth type b) Hummer type d) Axial flow type

Description : It consists of spike tooth cylinder, woven- wire mesh concave and upper casing provided with helical concave. a) Dummy type c) Spike-tooth type b) Hummer type d) Axial flow type

Last Answer : Axial flow type

It consists of beats mounted on a shaft which rotates inside a closed casing and concave. a) Dummy type c) Spike-tooth type c) Hummer type d) Axial flow type

Description : It consists of beats mounted on a shaft which rotates inside a closed casing and concave. a) Dummy type c) Spike-tooth type c) Hummer type d) Axial flow type

Last Answer : Dummy type

A is a track-type tractor with a blade attached in the front A. Car C. Bulldozer B. Truck D. Buses

Description : A is a track-type tractor with a blade attached in the front A. Car C. Bulldozer B. Truck D. Buses

Last Answer : Bulldozer

This type of harrow suitable to work in hard and stony soils. b. a. Straight tooth harrow c. a. Fixed tooth harrow d. None of the above.

Description : This type of harrow suitable to work in hard and stony soils. b. a. Straight tooth harrow c. a. Fixed tooth harrow d. None of the above.

Last Answer : Ans - a. Spring tooth harrow

Blades of disc harrow are sharpened from the_______ side penetrate more readily than blades sharpened from the__________ side a) convex, concave c) concave, convex b) Front, rear d) Rear, front

Description : Blades of disc harrow are sharpened from the_______ side penetrate more readily than blades sharpened from the__________ side a) convex, concave c) concave, convex b) Front, rear d) Rear, front

Last Answer : c) concave, convex

Which statement best describes the operating principle of a constant-speed propeller? a. As throttle setting is changed by the pilot, the prop governor causes pitch angle of the propeller blades to remain unchanged b. The propeller control regulates the engine RPM and in turn the propeller RPM c. A high blade angle, or increased pitch, reduces the propeller drag and allows more engine power for take-offs d. As the propeller control setting is changed by the pilot, the RPM of the engines remains constant as the pitch angle of the propeller changes

Description : Which statement best describes the operating principle of a constant-speed propeller? a. As throttle setting is changed by the pilot, the prop governor causes pitch angle of the propeller blades to ... the pilot, the RPM of the engines remains constant as the pitch angle of the propeller changes

Last Answer : b. The propeller control regulates the engine RPM and in turn the propeller RPM

Junior hoe consist of and attached to the framework with hinge arrangement a) Reversible showers, nozzle body b) Reversible shovels, curved tynes c) Reversible shovels, curved tyres d) Pressure regulator, spray lance

Description : Junior hoe consist of and attached to the framework with hinge arrangement a) Reversible showers, nozzle body b) Reversible shovels, curved tynes c) Reversible shovels, curved tyres d) Pressure regulator, spray lance

Last Answer : Reversible shovels, curved tynes

In centrifugal compressor terminology, vaneless space refers to the space between A. The inlet and blade inlet edge B. Blades in the impeller C. Diffuser exit and volute casing D. Impeller tip and diffuser inlet edge

Description : In centrifugal compressor terminology, vaneless space refers to the space between A. The inlet and blade inlet edge B. Blades in the impeller C. Diffuser exit and volute casing D. Impeller tip and diffuser inlet edge

Last Answer : ANSWER : D

Centrifugal pump is normally classified on the basis of the (A) rpm (B) Type of casing (C) Impeller blade angle (D) Number of blades in impeller

Description : Centrifugal pump is normally classified on the basis of the (A) rpm (B) Type of casing (C) Impeller blade angle (D) Number of blades in impeller

Last Answer : (B) Type of casing

The blades of a centrifugal impeller are said to be curved forward, if the __________ of the motion of impeller blades. (A) Inlet tip of a blade curves in a direction opposite to that (B) Outlet tip of a blade curves in a direction opposite to that (C) Inlet tip of a blade is towards the direction (D) Outlet tip of a blade is towards the direction

Description : The blades of a centrifugal impeller are said to be curved forward, if the __________ of the motion of impeller blades. (A) Inlet tip of a blade curves in a direction opposite to that (B) Outlet tip ... Inlet tip of a blade is towards the direction (D) Outlet tip of a blade is towards the direction

Last Answer : (D) Outlet tip of a blade is towards the direction

Noise produced by cooling fans (employed in air cooled heat exchangers or cooling tower) is mainly caused due to the turbulence created by blade passage through air. It can be reduced by use of a slower fan (A) With greater number of blades (B) Of increased diameter (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Noise produced by cooling fans (employed in air cooled heat exchangers or cooling tower) is mainly caused due to the turbulence created by blade passage through air. It can be reduced by use of a slower fan (A) With greater ... (B) Of increased diameter (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The isentropic enthalpy drop in moving blade is two-third of the isentropic enthalpy drop in fixed blades of a turbine. The degree of reaction will be (A) 0.4 (B) 0.56 (C) 0.67 (D) 1.67

Description : The isentropic enthalpy drop in moving blade is two-third of the isentropic enthalpy drop in fixed blades of a turbine. The degree of reaction will be (A) 0.4 (B) 0.56 (C) 0.67 (D) 1.67

Last Answer : (A) 0.4

The plough bottom as combined unit consist of: a) None of these c) Coulter , jointer and frog b) Beam , handle and MB d) Share, landside , frog and MB

Description : The plough bottom as combined unit consist of: a) None of these c) Coulter , jointer and frog b) Beam , handle and MB d) Share, landside , frog and MB

Last Answer : Share, landside , frog and Mb

This type blades in rotary tiller are more effective in cutting weeds and they do not Pulverize the soil much. b. twisted c. straight d. None of the above

Description : This type blades in rotary tiller are more effective in cutting weeds and they do not Pulverize the soil much. b. twisted c. straight d. None of the above

Last Answer : Ans- a. ‘L’

In single action harrow two gangs placed end to end, which through the soil in directions. b. Same c. Diagonal d. None of the above

Description : In single action harrow two gangs placed end to end, which through the soil in directions. b. Same c. Diagonal d. None of the above

Last Answer : Ans - a. Opposite

Singal acting disk harrow throw the soil in direction. i. Opposite. c) left ii. Backward d) right

Description : Singal acting disk harrow throw the soil in direction. i. Opposite. c) left ii. Backward d) right

Last Answer : Opposite

are used to hold water in the soil. A. Bunds. C. Harrow B. Ridger. D. None of the above

Description : are used to hold water in the soil. A. Bunds. C. Harrow B. Ridger. D. None of the above

Last Answer : Bunds

Axial flow thresher uses a) Raspbar type cylinder b) Serrated disc type c) Spike tooth d) Hammer mill

Description : Axial flow thresher uses a) Raspbar type cylinder b) Serrated disc type c) Spike tooth d) Hammer mill

Last Answer : a) Raspbar type cylinder

The two types of cylinder used on power wheat threshers are: a) Serrated disc and rasp bar b) Spike tooth and wire loop type c) Spike tooth and hammer mill d) Hammer mill and flails

Description : The two types of cylinder used on power wheat threshers are: a) Serrated disc and rasp bar b) Spike tooth and wire loop type c) Spike tooth and hammer mill d) Hammer mill and flails

Last Answer : c) Spike tooth and hammer mill