In Cup feed mechanism The cups have two faces, c. for Two different seeds d. None of the above. b. one for good seeds and the other for damaged seeds

In Cup feed mechanism The cups have two faces, c. for Two different seeds d. None of the above. b. one for good seeds and the other for damaged seeds
by

1 Answer

Answer :

Ans - a.one for larger seeds and the other for smaller seeds


by

Related questions

This type seed metering mechanism consist of wheel with fine and coarse ribbed flanges. b. fluted feed c. Cup feed d. None of the above

Description : This type seed metering mechanism consist of wheel with fine and coarse ribbed flanges. b. fluted feed c. Cup feed d. None of the above

Last Answer : Ans - a. Internal double run

For sowing of wheat seed, a suitable metering mechanism is: A. Cup feed B. Cell feed C. Fluted roller D. Brush feed

Description : For sowing of wheat seed, a suitable metering mechanism is: A. Cup feed B. Cell feed C. Fluted roller D. Brush feed

Last Answer : Fluted roller

is the type of seed metering mechanism. a) Fluted feed type b) Cup feed type c) Brush feed mechanism d) All of above

Description : is the type of seed metering mechanism. a) Fluted feed type b) Cup feed type c) Brush feed mechanism d) All of above

Last Answer : All of above

In cup food metering device, the seed rate is controlled by: A. Shaft rotation B. Speed of machine C. Size of cups D. All are correct

Description : In cup food metering device, the seed rate is controlled by: A. Shaft rotation B. Speed of machine C. Size of cups D. All are correct

Last Answer :  Size of cups

The mechanism of a seed drill or fertilizer distributor which delivers seeds or fertilizers from the hopper at selected rates is called . a) Seed drill b) Seed box c) Seed metering mechanism d) Covering device

Description : The mechanism of a seed drill or fertilizer distributor which delivers seeds or fertilizers from the hopper at selected rates is called . a) Seed drill b) Seed box c) Seed metering mechanism d) Covering device

Last Answer : Seed metering mechanism  

The metering mechanism used in potato planter is: A. Fluted roller B. Brush feed type C. Picker wheel type D. Cell feed type

Description : The metering mechanism used in potato planter is: A. Fluted roller B. Brush feed type C. Picker wheel type D. Cell feed type

Last Answer :  Picker wheel type

Which ARQ mechanism deals with the transmission of only damaged or lost frames despite the other multiple frames by increasing the efficiency & its utility in noisy channels? a. GoBackN ARQ b. Selective Repeat ARQ c. StopandWait ARQ d. All of the above

Description : Which ARQ mechanism deals with the transmission of only damaged or lost frames despite the other multiple frames by increasing the efficiency & its utility in noisy channels? a. GoBackN ARQ b. Selective Repeat ARQ c. StopandWait ARQ d. All of the above

Last Answer : b. Selective Repeat ARQ

Pick out the wrong statement. (A) Gape is the greatest distance between the crushing surfaces or the jaws (B) The angle of nip (2α) is the angle between roll faces at the level where they will just take hold of a particle and draw it in the crushing zone (C) Crushing efficiency is the ratio of the energy absorbed by the solid to the surfaces energy created by crushing (D) Reduction ratio is the ratio of the maximum size of the particles in the feed to that in the product

Description : Pick out the wrong statement. (A) Gape is the greatest distance between the crushing surfaces or the jaws (B) The angle of nip (2α) is the angle between roll faces at the level where they will ... Reduction ratio is the ratio of the maximum size of the particles in the feed to that in the product

Last Answer : (C) Crushing efficiency is the ratio of the energy absorbed by the solid to the surfaces energy created by crushing

Have you seen any actual Christians on your facebook feed who have any thing to say about Starbuck's red cups?

Description : Have you seen any actual Christians on your facebook feed who have any thing to say about Starbuck's red cups?

Last Answer : Apart from being one degree of separation from the dipshit that started it all, I don’t know anyone that cares. Most people are willing to change the conversation to how bad Starbucks’ coffee tastes.

Ali buys a glass, a pencil box and a cup and pays Rs. 21 to the shopkeeper. Rakesh buys a cup, two pencil boxes and a glass and pays Rs. 28 to the shopkeeper. Preeti buys two glasses, a cup and two pencil boxes and pays Rs. 35 to the shopkeeper. The cost of 10 cups will be (A) Rs. 40 (B) Rs. 60 (C) Rs. 80 (D) Rs. 70

Description : Ali buys a glass, a pencil box and a cup and pays Rs. 21 to the shopkeeper. Rakesh buys a cup, two pencil boxes and a glass and pays Rs. 28 to the shopkeeper. Preeti buys two glasses, a cup and two pencil boxes and pays Rs ... The cost of 10 cups will be (A) Rs. 40 (B) Rs. 60 (C) Rs. 80 (D) Rs. 70 

Last Answer : Answer: D

How many cups are 2 thirds cup times three?

Description : How many cups are 2 thirds cup times three?

Last Answer : Need answer

Is 4 pints and 1 cup greater than 10 cups?

Description : Is 4 pints and 1 cup greater than 10 cups?

Last Answer : yes

Laurie poured 4 cups of water into a bowl. Each cup contained 250 mL of water. Is it reasonable to say that the bowl contained 10 L?

Description : Laurie poured 4 cups of water into a bowl. Each cup contained 250 mL of water. Is it reasonable to say that the bowl contained 10 L?

Last Answer : A+LS No

In STL files Euler’s rule for solids can be written as a.No. of faces – No. of edges + No. of vertices = 3 x No. of bodies b.No. of faces – No. of edges + No. of vertices = No. of bodies c.No. of faces – No. of edges + No. of vertices = 2 x No. of bodies d.No. of faces – No. of edges + No. of vertices = 4 x No. of bodies

Description : In STL files Euler’s rule for solids can be written as a.No. of faces †No. of edges + No. of vertices = 3 x No. of bodies b.No. of faces †No. of edges + No. of vertices = No. of bodies c.No. of ... = 2 x No. of bodies d.No. of faces †No. of edges + No. of vertices = 4 x No. of bodies

Last Answer : c.No. of faces – No. of edges + No. of vertices = 2 x No. of bodies

The mechanism which picks up seeds from the seed box and delivers them in to the seed tube is known as? [a] Seed Enhancer Mechanism [b] Seed Metering Mechanism [c] Seed Placing Mechanism [d] Seed Augmenting Mechanism [e] None of the above

Description : The mechanism which picks up seeds from the seed box and delivers them in to the seed tube is known as? [a] Seed Enhancer Mechanism [b] Seed Metering Mechanism [c] Seed Placing Mechanism [d] Seed Augmenting Mechanism [e] None of the above

Last Answer : [d] Seed Augmenting Mechanism

The metering mechanism which is suitable for the metering of small seeds as well as large grains. (a) Internal double run mechanism (b) Fluted wheel mechanism (c) Stationary opening with auger (d) None of the above

Description : The metering mechanism which is suitable for the metering of small seeds as well as large grains. (a) Internal double run mechanism (b) Fluted wheel mechanism (c) Stationary opening with auger (d) None of the above

Last Answer : (a) Internal double run mechanism

Cholesterol by a feed back mechanism inhibits the activity of (A) HMG-CoA synthetase (B) HMG-CoA reductase (C) Thilase (D) Mevalonate kinase

Description : Cholesterol by a feed back mechanism inhibits the activity of (A) HMG-CoA synthetase (B) HMG-CoA reductase (C) Thilase (D) Mevalonate kinase

Last Answer : Answer : B

The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Capacity of field choppers (chaff cutter) is affected by.... (a) Capacity of the feed mechanism (cross-sectional area) (b) Rate of advance of material through throat considered as to be same linear speed of feed mechanism (c) Density of forage material (d) All of the above

Description : Capacity of field choppers (chaff cutter) is affected by.... (a) Capacity of the feed mechanism (cross-sectional area) (b) Rate of advance of material through throat considered as to be same linear speed of feed mechanism (c) Density of forage material (d) All of the above

Last Answer : (d) All of the above

nging the speed of feed mechanism (b) The number of knives on feed mechanism (c) Changing speed of cutter head (d) All of the above

Description : nging the speed of feed mechanism (b) The number of knives on feed mechanism (c) Changing speed of cutter head (d) All of the above

Last Answer : (d) All of the above

Capacity of field choppers (chaff cutter) is affected by (a)capacity of the feed mechanism (cross sectional area) (b)Rate of advance of material through throat considered as to be the same linear speed of feed mechanism (c) density of forage material (d) all of the above

Description : Capacity of field choppers (chaff cutter) is affected by (a)capacity of the feed mechanism (cross sectional area) (b)Rate of advance of material through throat considered as to be the same linear speed of feed mechanism (c) density of forage material (d) all of the above

Last Answer : (d) all of the above

Consider the following four statements (1-4) about certain desert animals such as kangaroo, rat. (1) They have dark colour and high rate of reproduction and excrete solid urine. (2) They do not drink water, breathe at a slow rate to conserve water and have their body covered with thick hairs. (3) They feed on dry seeds and do not require drinking water. (4) They excrete very concentrated urine and do not use water to regulate body temperature.

Description : Consider the following four statements (1-4) about certain desert animals such as kangaroo, rat. (1) They have dark colour and high rate of reproduction and excrete solid urine. (2) They do ... water. (4) They excrete very concentrated urine and do not use water to regulate body temperature.

Last Answer : (c) 3 and 4

Pick out the correct statement. (A) Reaction of NH3 with HNO3 to produce (NH4 )2NO3 is endothermic (B) With increase in NH3 /CO2 ratio, urea yield decreases for a given temperature, pressure and total feed rate (C) Biuret (an intermediate during urea manufacture) is toxic to seeds and animals (D) Both (B) and (C)

Description : Pick out the correct statement. (A) Reaction of NH3 with HNO3 to produce (NH4 )2NO3 is endothermic (B) With increase in NH3 /CO2 ratio, urea yield decreases for a given temperature, pressure and total ... (an intermediate during urea manufacture) is toxic to seeds and animals (D) Both (B) and (C)

Last Answer : (B) With increase in NH3 /CO2 ratio, urea yield decreases for a given temperature, pressure and total feed rate

In a slider crank mechanism, the crank is rotating at 200 rpm. If length of connecting rod is 8 mts and crank shaft is 2 mts, velocity of crosshead at 30? rotation of crank shaft equals. a.30.2 m/s b.33.2 m/s c.35.8 mts/s d.107 dynes e.25.5 m/s

Description : In a slider crank mechanism, the crank is rotating at 200 rpm. If length of connecting rod is 8 mts and crank shaft is 2 mts, velocity of crosshead at 30? rotation of crank shaft equals. a.30.2 m/s b.33.2 m/s c.35.8 mts/s d.107 dynes e.25.5 m/s

Last Answer : e. 25.5 m/s

A seed drill with mechanical seed metering device mainly consists of: Frame, Seed box, Seed metering mechanism, drive transmission system, Furrow openers, Covering device, ……, hitch frame and Transport wheels. b. Differential c. U.V joints d. None of the above.

Description : A seed drill with mechanical seed metering device mainly consists of: Frame, Seed box, Seed metering mechanism, drive transmission system, Furrow openers, Covering device, ……, hitch frame and Transport wheels. b. Differential c. U.V joints d. None of the above.

Last Answer : Ans - a. clutch

A metering mechanism that does not required cut-off device is: A. Inclined plate B. Vertical plate C. Horizontal plate D. All are correct

Description : A metering mechanism that does not required cut-off device is: A. Inclined plate B. Vertical plate C. Horizontal plate D. All are correct

Last Answer :  All are correct

A lever, which operates the gang mechanism of the disk harrow, is called the i. Spanners lever. c) spacer lever ii. Gang control lever. d) Bearing lever

Description : A lever, which operates the gang mechanism of the disk harrow, is called the i. Spanners lever. c) spacer lever ii. Gang control lever. d) Bearing lever

Last Answer : Gang control lever

Which component of seed drill is used for transmit power to operate seed dropping mechanism. a) Frame b) Transport wheel c) Seed box d) Covering device

Description : Which component of seed drill is used for transmit power to operate seed dropping mechanism. a) Frame b) Transport wheel c) Seed box d) Covering device

Last Answer : Transport wheel

is not the function of seed drill a) To carry seeds b) To increase size of seed c) To meter the seeds d) Two places in furrows in acceptable form

Description : is not the function of seed drill a) To carry seeds b) To increase size of seed c) To meter the seeds d) Two places in furrows in acceptable form

Last Answer : To increase size of seed

Seed drill uniformity can be measured by a) Number of seed per rotation of metering unit b) Spacing between seeds c) a and b both d) none of these Ans. c

Description : Seed drill uniformity can be measured by a) Number of seed per rotation of metering unit b) Spacing between seeds c) a and b both d) none of these Ans. c

Last Answer : ans c

It is a machine used for placing the seeds in a continuous stream in furrows at uniform rate and at controlled depth with an arrangement of covering the seeds with soil. a. Seed tube b. Seed dropper d. None of the above.

Description : It is a machine used for placing the seeds in a continuous stream in furrows at uniform rate and at controlled depth with an arrangement of covering the seeds with soil. a. Seed tube b. Seed dropper d. None of the above.

Last Answer : Ans - c. Seed drill

In Hill dropping few seeds are dropped as a hill at a fixed place and not in a continuous stream. The spacing between hill to hill in a row is …………. a.Inclined b. Not uniform d. None of the above

Description : In Hill dropping few seeds are dropped as a hill at a fixed place and not in a continuous stream. The spacing between hill to hill in a row is …………. a.Inclined b. Not uniform d. None of the above

Last Answer : Ans - c. constant

It consists of dropping the seeds in furrow lines in a continuous stream and covering them with soil. The spacing between the seeds is not uniform. a. Dibbing c. Broadcasting d. None of the above.

Description : It consists of dropping the seeds in furrow lines in a continuous stream and covering them with soil. The spacing between the seeds is not uniform. a. Dibbing c. Broadcasting d. None of the above.

Last Answer : Ans - b. Drilling

It is the process of placing seeds in holes made in the seedbed and closing the seed with soil. In this method, seeds are placed in holes made at definite depth at fixed spacing. b. Drilling c. Broadcasting d. None of the above

Description : It is the process of placing seeds in holes made in the seedbed and closing the seed with soil. In this method, seeds are placed in holes made at definite depth at fixed spacing. b. Drilling c. Broadcasting d. None of the above.

Last Answer : Ans - a. Dibbing

It is the method of random scattering of seeds on the surface of seedbed. a. Dibbing b. Drilling d. None of the above.

Description : It is the method of random scattering of seeds on the surface of seedbed. a. Dibbing b. Drilling d. None of the above.

Last Answer : Ans - c. Broadcasting

Pneumatic seed drills are suitable for sowing: A. Small seeds B. Bolder seeds C. Both (a) & (b) D. None of these

Description : Pneumatic seed drills are suitable for sowing: A. Small seeds B. Bolder seeds C. Both (a) & (b) D. None of these

Last Answer : Both (a) & (b)

is a machine for placing the seeds in a continuous flow. a) Seed drill b) Transplanting c) Hill dropping d) Check row planting

Description : is a machine for placing the seeds in a continuous flow. a) Seed drill b) Transplanting c) Hill dropping d) Check row planting

Last Answer : Seed drill

In method, seeds are dropped at fixed spacing and not in a continuous stream. a) Seed dropping behind the plough b) Transplanting c) Hill dropping d) Check row planting

Description : In method, seeds are dropped at fixed spacing and not in a continuous stream. a) Seed dropping behind the plough b) Transplanting c) Hill dropping d) Check row planting

Last Answer : Hill dropping

is the process of placing seeds in holes made in seedbed and covering them. a) Broadcasting. b) Dibbling c) Drilling. d) Transplanting

Description : is the process of placing seeds in holes made in seedbed and covering them. a) Broadcasting. b) Dibbling c) Drilling. d) Transplanting

Last Answer : Dibbling

machine is used for placing the seeds in continuous furrows at uniform rate. a) Dry land weeder b) Junior home c) Seed drill d) Engine operated weeder

Description : machine is used for placing the seeds in continuous furrows at uniform rate. a) Dry land weeder b) Junior home c) Seed drill d) Engine operated weeder

Last Answer : Seed drill

methods consists of dropping the seeds in furrow lines in a continuous flow and covering them with soil. a. Dibbling b. Transplanting c. Drilling d. Seed dropping behind the plough

Description : methods consists of dropping the seeds in furrow lines in a continuous flow and covering them with soil. a. Dibbling b. Transplanting c. Drilling d. Seed dropping behind the plough

Last Answer : Drilling

Functions of seed drill machine . g. To carry the seeds h. To open furrow to an uniform depth i. To cover the seeds and compact the soil around the seed j. All of the above

Description : Functions of seed drill machine . g. To carry the seeds h. To open furrow to an uniform depth i. To cover the seeds and compact the soil around the seed j. All of the above

Last Answer : All of the above

Below is not a function of seed drill a) To meter the seeds b) To carry the seeds c) To remove the seeds d) To place the seeds in furrow

Description : Below is not a function of seed drill a) To meter the seeds b) To carry the seeds c) To remove the seeds d) To place the seeds in furrow

Last Answer : To remove the seeds

consists of preparing seedlings in nursery and then planting these seeds in the prepared field. a) Hill dropping b) Transplanting c) Seed dropping behind the plough d) Check row planting

Description : consists of preparing seedlings in nursery and then planting these seeds in the prepared field. a) Hill dropping b) Transplanting c) Seed dropping behind the plough d) Check row planting

Last Answer : Transplanting

The following operation is not carried out by an plough a) sowing seeds b) breaking the clods c) crushing the soil d) hammering the soil

Description : The following operation is not carried out by an plough a) sowing seeds b) breaking the clods c) crushing the soil d) hammering the soil

Last Answer : sowing seeds

Planters are used for sowing: A. Small seeds B. Bolder seeds C. Seedlings D. Plants

Description : Planters are used for sowing: A. Small seeds B. Bolder seeds C. Seedlings D. Plants

Last Answer : Bolder seeds

Seed drill is used for sowing: A. Small seeds B. Bolder seeds C. Seedlings D. Plants

Description : Seed drill is used for sowing: A. Small seeds B. Bolder seeds C. Seedlings D. Plants

Last Answer :  Small seeds

The equipment used for dropping seeds in a continuous stream and the spacing between plant to plant in a row is not constant is: A. Seed drill B. Planter C. Trans planter D. All are correct

Description : The equipment used for dropping seeds in a continuous stream and the spacing between plant to plant in a row is not constant is: A. Seed drill B. Planter C. Trans planter D. All are correct

Last Answer : Seed drill

The dropping of seeds in furrow lines in continuous flow is: A. Drilling B. Planting C. Dibbling D. Hill dropping

Description : The dropping of seeds in furrow lines in continuous flow is: A. Drilling B. Planting C. Dibbling D. Hill dropping

Last Answer : Drilling

ASL facial expressions/grammar - do I have to have different faces for y/n vs whq?

Description : ASL facial expressions/grammar - do I have to have different faces for y/n vs whq?

Last Answer : Ooh I used to know this. From what I remember, they are different. With a wh- question, the eyebrows tend to get an inquisitive-furrow sort of thing (they go more down than anything), and with a y/n question the eyebrows get a raised inquisitivity (they go up). —Does that make any sense?—