The metering mechanism used in potato planter is: A. Fluted roller B. Brush feed type C. Picker wheel type D. Cell feed type

The metering mechanism used in potato planter is: A. Fluted roller B. Brush feed type C. Picker wheel type D. Cell feed type
by

1 Answer

Answer :

 Picker wheel type
by

Related questions

For sowing of wheat seed, a suitable metering mechanism is: A. Cup feed B. Cell feed C. Fluted roller D. Brush feed

Description : For sowing of wheat seed, a suitable metering mechanism is: A. Cup feed B. Cell feed C. Fluted roller D. Brush feed

Last Answer : Fluted roller

is the type of seed metering mechanism. a) Fluted feed type b) Cup feed type c) Brush feed mechanism d) All of above

Description : is the type of seed metering mechanism. a) Fluted feed type b) Cup feed type c) Brush feed mechanism d) All of above

Last Answer : All of above

This type seed metering mechanism consist of wheel with fine and coarse ribbed flanges. b. fluted feed c. Cup feed d. None of the above

Description : This type seed metering mechanism consist of wheel with fine and coarse ribbed flanges. b. fluted feed c. Cup feed d. None of the above

Last Answer : Ans - a. Internal double run

The metering mechanism which is suitable for the metering of small seeds as well as large grains. (a) Internal double run mechanism (b) Fluted wheel mechanism (c) Stationary opening with auger (d) None of the above

Description : The metering mechanism which is suitable for the metering of small seeds as well as large grains. (a) Internal double run mechanism (b) Fluted wheel mechanism (c) Stationary opening with auger (d) None of the above

Last Answer : (a) Internal double run mechanism

The metering mechanism which is most suitable for metering of small seed is to handle is a. Internal double run mechanism b. Fluted wheel mechanism c. Stationery opening with agitator d. None of the above

Description : The metering mechanism which is most suitable for metering of small seed is to handle is a. Internal double run mechanism b. Fluted wheel mechanism c. Stationery opening with agitator d. None of the above

Last Answer : b. Fluted wheel mechanism

Seed drills differ from the planters in respect of a) metering mechanism b) ground wheel design c) transmission system between ground wheel and roller wheel d) none of the above

Description : Seed drills differ from the planters in respect of a) metering mechanism b) ground wheel design c) transmission system between ground wheel and roller wheel d) none of the above

Last Answer : a) metering mechanism

Most commonly used metering device for bulk flow seed metering of small and medium size seeds (grains) a) Fluted wheel b) Internal double run c) Stationary opening with agitator d) None of the above

Description : Most commonly used metering device for bulk flow seed metering of small and medium size seeds (grains) a) Fluted wheel b) Internal double run c) Stationary opening with agitator d) None of the above

Last Answer : a) Fluted wheel

The fluted roller of seed drill is made of: A. Aluminum B. Cast iron C. Plastic D. All are correct

Description : The fluted roller of seed drill is made of: A. Aluminum B. Cast iron C. Plastic D. All are correct

Last Answer : Cast iron

Most commonly used for the metering mechanism for fertilizer a. Spur wheel b. Serrated wheel c. Star wheel d. Auger type

Description : Most commonly used for the metering mechanism for fertilizer a. Spur wheel b. Serrated wheel c. Star wheel d. Auger type

Last Answer : a. Spur wheel

The average spacing of seeds or hills in field is obtained or determined by a) The ratio of linear or peripheral speed of seed pick up units (cells fingers, etc) to the forward speed of the planter b) The distance between the speed pick up units (cells) on the metering unit c) Both (a) and (b) d) None of the above

Description : The average spacing of seeds or hills in field is obtained or determined by a) The ratio of linear or peripheral speed of seed pick up units (cells fingers, etc) to the forward speed of the planter b) The distance ... up units (cells) on the metering unit c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

A seed drill with mechanical seed metering device mainly consists of: Frame, Seed box, Seed metering mechanism, drive transmission system, Furrow openers, Covering device, ……, hitch frame and Transport wheels. b. Differential c. U.V joints d. None of the above.

Description : A seed drill with mechanical seed metering device mainly consists of: Frame, Seed box, Seed metering mechanism, drive transmission system, Furrow openers, Covering device, ……, hitch frame and Transport wheels. b. Differential c. U.V joints d. None of the above.

Last Answer : Ans - a. clutch

A metering mechanism that does not required cut-off device is: A. Inclined plate B. Vertical plate C. Horizontal plate D. All are correct

Description : A metering mechanism that does not required cut-off device is: A. Inclined plate B. Vertical plate C. Horizontal plate D. All are correct

Last Answer :  All are correct

The mechanism of a seed drill or fertilizer distributor which delivers seeds or fertilizers from the hopper at selected rates is called . a) Seed drill b) Seed box c) Seed metering mechanism d) Covering device

Description : The mechanism of a seed drill or fertilizer distributor which delivers seeds or fertilizers from the hopper at selected rates is called . a) Seed drill b) Seed box c) Seed metering mechanism d) Covering device

Last Answer : Seed metering mechanism  

The mechanism which picks up seeds from the seed box and delivers them in to the seed tube is known as? [a] Seed Enhancer Mechanism [b] Seed Metering Mechanism [c] Seed Placing Mechanism [d] Seed Augmenting Mechanism [e] None of the above

Description : The mechanism which picks up seeds from the seed box and delivers them in to the seed tube is known as? [a] Seed Enhancer Mechanism [b] Seed Metering Mechanism [c] Seed Placing Mechanism [d] Seed Augmenting Mechanism [e] None of the above

Last Answer : [d] Seed Augmenting Mechanism

Planters differ from a seed drill in respect of- (A) kind of power transmission system (B)kind of metering mechanism (C)kind of furrow opener used (D)all of the above

Description : Planters differ from a seed drill in respect of- (A) kind of power transmission system (B)kind of metering mechanism (C)kind of furrow opener used (D)all of the above

Last Answer : (B)kind of metering mechanism

Seed damage due to cut-off not a problem in (a) Horizontal plate metering mechanism (b) Vertical plate metering mechanism (c) Both (a) and (b) (d) Inclined plate metering mechanism

Description : Seed damage due to cut-off not a problem in (a) Horizontal plate metering mechanism (b) Vertical plate metering mechanism (c) Both (a) and (b) (d) Inclined plate metering mechanism

Last Answer : (d) Inclined plate metering mechanism

Which component of seed drill is used for transmit power to operate seed dropping mechanism. a) Frame b) Transport wheel c) Seed box d) Covering device

Description : Which component of seed drill is used for transmit power to operate seed dropping mechanism. a) Frame b) Transport wheel c) Seed box d) Covering device

Last Answer : Transport wheel

If you were the ingredients picker on Chopped, what 4 items would you put in the baskets for the contestants?

Description : If you were the ingredients picker on Chopped, what 4 items would you put in the baskets for the contestants?

Last Answer : Asparagus, maple syrup or honey, filo dough, and cheetos.

Does the roller use more paint than the brush?

Description : So far I have known so, but a paint shop salesman says just less.

Last Answer : It's not a good idea to use a roller on a smaller surface because it absorbs a lot of paint that doesn't pay off on a small surface. On the other hand, from the point of view of ... loss that cannot be squeezed out of it is negligible. The surface painted with a roller is also more beautiful.   

It is better to paint with a brush or roller

Description : What is easier and what makes less smudges? I haven't bought anything yet so I ask. What do you paint at home?

Last Answer : Out of necessity, I had to start painting, and without cats, I managed it only with a roller. Where I don't get the paint, I wrap it with varnishing cardboard and use a flat brush in hard-to-reach ... I can't clear it, I just move the furniture in various ways and I painted a large library ...

In Cup feed mechanism The cups have two faces, c. for Two different seeds d. None of the above. b. one for good seeds and the other for damaged seeds

Description : In Cup feed mechanism The cups have two faces, c. for Two different seeds d. None of the above. b. one for good seeds and the other for damaged seeds

Last Answer : Ans - a.one for larger seeds and the other for smaller seeds

Seed drill uniformity can be measured by a) Number of seed per rotation of metering unit b) Spacing between seeds c) a and b both d) none of these Ans. c

Description : Seed drill uniformity can be measured by a) Number of seed per rotation of metering unit b) Spacing between seeds c) a and b both d) none of these Ans. c

Last Answer : ans c

In cup food metering device, the seed rate is controlled by: A. Shaft rotation B. Speed of machine C. Size of cups D. All are correct

Description : In cup food metering device, the seed rate is controlled by: A. Shaft rotation B. Speed of machine C. Size of cups D. All are correct

Last Answer :  Size of cups

Sub metering data helps to determine which data. a) financial data b) yield data c) system level performance data d) none of the above

Description : Sub metering data helps to determine which data. a) financial data b) yield data c) system level performance data d) none of the above

Last Answer : yield data

The difference between seed drill and planter is a) Variation in hill to hill spacing b) Number of seed per hill is more uniform in planter c) Seed delivery tube d) Furrow opener e) Both a and b Ans. e

Description : The difference between seed drill and planter is a) Variation in hill to hill spacing b) Number of seed per hill is more uniform in planter c) Seed delivery tube d) Furrow opener e) Both a and b Ans. e

Last Answer : ans e

Uniformity measure of a planter is a) Equal seed spacing b) Equal number of seed dropped per hill c) Minimum variation in different openers d) All of the above Ans. d

Description : Uniformity measure of a planter is a) Equal seed spacing b) Equal number of seed dropped per hill c) Minimum variation in different openers d) All of the above Ans. d

Last Answer : ans d

Blower is part of: A. Planter. B. Zero till drill C. Pneumatic seed drill D. Till plant machine

Description : Blower is part of: A. Planter. B. Zero till drill C. Pneumatic seed drill D. Till plant machine

Last Answer : Pneumatic seed drill

The precision planter is: A. Seed drill B. Broadcaster C. Dibbler D. Dofaan

Description : The precision planter is: A. Seed drill B. Broadcaster C. Dibbler D. Dofaan

Last Answer : Dibbler

The equipment used for dropping seeds in a continuous stream and the spacing between plant to plant in a row is not constant is: A. Seed drill B. Planter C. Trans planter D. All are correct

Description : The equipment used for dropping seeds in a continuous stream and the spacing between plant to plant in a row is not constant is: A. Seed drill B. Planter C. Trans planter D. All are correct

Last Answer : Seed drill

Dibbler is a: A. Seed drill B. Planter C. Trans planter D. None of these

Description : Dibbler is a: A. Seed drill B. Planter C. Trans planter D. None of these

Last Answer : Planter

When removing ball or roller bearings from the shaft of a motor, you should use a _____________. A. rawhide hammer B. brass mallet C. wheel puller D. soft iron pry bar

Description : When removing ball or roller bearings from the shaft of a motor, you should use a _____________. A. rawhide hammer B. brass mallet C. wheel puller D. soft iron pry bar

Last Answer : Answer: C

Which one of the following rollers is suitable for soil-cement stabilized road construction? (a) Vibratory roller (b) Sheepfoot roller (c) Pneumatic roller (d) Smooth wheel roller

Description : Which one of the following rollers is suitable for soil-cement stabilized road construction? (a) Vibratory roller (b) Sheepfoot roller (c) Pneumatic roller (d) Smooth wheel roller

Last Answer : (c) Pneumatic roller

State suitability of following compaction equipments (i) Smooth wheel roller (ii) Sheep foot roller, (iii) Rammer and (iv) Vibrator

Description : State suitability of following compaction equipments (i) Smooth wheel roller (ii) Sheep foot roller, (iii) Rammer and (iv) Vibrator

Last Answer : Types of Compaction Equipment: - i) Compaction by Rolling: - a) Smooth wheel rollers : Suitability: These rollers best suitable for 5ubgrade or base coarse compaction of cohesion less soils. ... : Suitable for compacting granular soils. with no fines in layer up to 1 m thickness

In a horizontal plate type planter maximum obtainable value of cell fill is : A.Greater then 100% B.Less than 100% C.200% D.None of the above

Description : In a horizontal plate type planter maximum obtainable value of cell fill is : A.Greater then 100% B.Less than 100% C.200% D.None of the above

Last Answer : A.Greater then 100%

At a roller support the line of reaction and the roller base must be at an angle of a.60? b.90? c.not less than 60? d.not more than 60? e.107 dynes

Description : At a roller support the line of reaction and the roller base must be at an angle of a.60? b.90? c.not less than 60? d.not more than 60? e.107 dynes

Last Answer : b. 90?

Which of the following bearing will have least coefficient of friction a.Single ball bearing b.Cylinderical roller bearing c.Self aligury bearing d.Thrust ball bearing e.Tapered bearing

Description : Which of the following bearing will have least coefficient of friction a.Single ball bearing b.Cylinderical roller bearing c.Self aligury bearing d.Thrust ball bearing e.Tapered bearing

Last Answer : e. Tapered bearing

A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2? a.10 b.9 c.11 d.8 e.107 dynes

Description : A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2? a.10 b.9 c.11 d.8 e.107 dynes

Last Answer : a. 10

What Is The Use Of Taper Roller Bearing?

Description : What Is The Use Of Taper Roller Bearing?

Last Answer : A taper roller bearing is used to carry heavy loads because it has taper rollers instead of plain cylindrical rollers.

machine designed for harvesting, threshing , cleaning and collecting grains while moving through standing crops. a) Combine b) Self operated VCR c) Power roller thresher d) Post harvesting technology

Description : machine designed for harvesting, threshing , cleaning and collecting grains while moving through standing crops. a) Combine b) Self operated VCR c) Power roller thresher d) Post harvesting technology

Last Answer : Combine 

What type of service is NOT provided by the circuit shown in the illustration? EL-0094 A. Logging of engine order signals from the bridge. B. Printed record of alarms as they occur. C. Visual metering of temperature and pressure conditions. D. Periodic recording of pressure and temperature conditions.

Description : What type of service is NOT provided by the circuit shown in the illustration? EL-0094 A. Logging of engine order signals from the bridge. B. Printed record of alarms as they ... . Visual metering of temperature and pressure conditions. D. Periodic recording of pressure and temperature conditions.

Last Answer : Answer: A

Draw sketches showing fuel metering in the inline type F. I. P. and explain its working.

Description : Draw sketches showing fuel metering in the inline type F. I. P. and explain its working.

Last Answer : Fuel Metering in inline type fuel injection pump: The position of the plunger in the fuel injection pump can be varied by means of a control rod having a rack and pinion arrangement. By operating ... (vi) shows that no fuel is being supplied to the injector; i. e. the engine has stopped.

The type wheel is suitable for lomy and sandy soil in dry land weeder. a. Peg c. cono d. None of the above.

Description : The type wheel is suitable for lomy and sandy soil in dry land weeder. a. Peg c. cono d. None of the above.

Last Answer : Ans - b. star

Peg or star wheel type weeder is suitable for weeding in lands. a. Wet c. Soft d. None of the above.

Description : Peg or star wheel type weeder is suitable for weeding in lands. a. Wet c. Soft d. None of the above.

Last Answer : Ans - b. dry

Walking Type Tractor is also called as a. Wheel tractor c) Crawler tractor b. Power tiller d) Both a and b

Description : Walking Type Tractor is also called as a. Wheel tractor c) Crawler tractor b. Power tiller d) Both a and b

Last Answer : Power tiller

Cholesterol by a feed back mechanism inhibits the activity of (A) HMG-CoA synthetase (B) HMG-CoA reductase (C) Thilase (D) Mevalonate kinase

Description : Cholesterol by a feed back mechanism inhibits the activity of (A) HMG-CoA synthetase (B) HMG-CoA reductase (C) Thilase (D) Mevalonate kinase

Last Answer : Answer : B

The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Capacity of field choppers (chaff cutter) is affected by.... (a) Capacity of the feed mechanism (cross-sectional area) (b) Rate of advance of material through throat considered as to be same linear speed of feed mechanism (c) Density of forage material (d) All of the above

Description : Capacity of field choppers (chaff cutter) is affected by.... (a) Capacity of the feed mechanism (cross-sectional area) (b) Rate of advance of material through throat considered as to be same linear speed of feed mechanism (c) Density of forage material (d) All of the above

Last Answer : (d) All of the above

nging the speed of feed mechanism (b) The number of knives on feed mechanism (c) Changing speed of cutter head (d) All of the above

Description : nging the speed of feed mechanism (b) The number of knives on feed mechanism (c) Changing speed of cutter head (d) All of the above

Last Answer : (d) All of the above

Capacity of field choppers (chaff cutter) is affected by (a)capacity of the feed mechanism (cross sectional area) (b)Rate of advance of material through throat considered as to be the same linear speed of feed mechanism (c) density of forage material (d) all of the above

Description : Capacity of field choppers (chaff cutter) is affected by (a)capacity of the feed mechanism (cross sectional area) (b)Rate of advance of material through throat considered as to be the same linear speed of feed mechanism (c) density of forage material (d) all of the above

Last Answer : (d) all of the above

The lower horizontal line of the refrigeration cycle plotted on pressure-enthalpy-diagram represents (a) condensation of the refrigerant vapour (b) evaporation of the refrigerant liquid (c) compression of the refrigerant vapour (d) metering of the refrigerant liquid

Description : The lower horizontal line of the refrigeration cycle plotted on pressure-enthalpy-diagram represents (a) condensation of the refrigerant vapour (b) evaporation of the refrigerant liquid (c) compression of the refrigerant vapour (d) metering of the refrigerant liquid

Last Answer : Ans: b