Can Seals Be Used In Place Of Shields On A Ball Bearing?

Can Seals Be Used In Place Of Shields On A Ball Bearing?
by

1 Answer

Answer :

Not if you want to avoid problems. A shield provides a clearance between the inner and outer race, whereas a seal is attached to the inner race and could cause problems rubbing on the inner race, depending on the speed, heat, and starting torque of the machine.
by

Related questions

Which of the following bearing will have least coefficient of friction a.Single ball bearing b.Cylinderical roller bearing c.Self aligury bearing d.Thrust ball bearing e.Tapered bearing

Description : Which of the following bearing will have least coefficient of friction a.Single ball bearing b.Cylinderical roller bearing c.Self aligury bearing d.Thrust ball bearing e.Tapered bearing

Last Answer : e. Tapered bearing

What Are Four Types Of Turbine Seals?

Description : What Are Four Types Of Turbine Seals?

Last Answer : 1. Carbon rings fitted in segments around the shaft and held together by garter or retainer springs. 2. Labyrinth mated with shaft serration's or shaft seal strips. 3. Water seals where a shaft ... using woven or soft packing rings that are compressed with a gland to prevent leakage along the shaft.

Why won't Words With Friends accept the word "shields"?

Description : Why won't Words With Friends accept the word "shields"?

Last Answer : More info is needed, yo. There’s no reason why the world shouldn’t be accepted; it’s a perfectly valid word. The placing may have been the issue. Or did you accidentally spell it “sheilds”?

I have a male unneutered kitten (who will be neutered on Tuesday). Would you say that these are the beginnings of "face shields"?

Description : I have a male unneutered kitten (who will be neutered on Tuesday). Would you say that these are the beginnings of "face shields"?

Last Answer : He looks a bit young to be developing “tom” face. He’s probably just round-headed.

Who played @ The House of Shields, San Francisco on Sept 18th?

Description : Who played @ The House of Shields, San Francisco on Sept 18th?

Last Answer : http://www.houseofshields.com/calendar.htm Says you can contact them at [email protected] Apparently they had a band called Phoenix, could that be them? http://twitter.com/houseofshields/statuses/4093342499

Persian Shields...where to plant, etc.

Description : Persian Shields...where to plant, etc.

Last Answer : Need Answer

What shields your face eyes respirtory tract from chemical and biological warfare agents?

Description : What shields your face eyes respirtory tract from chemical and biological warfare agents?

Last Answer : A gas mask.

How did Indians make shields?

Description : How did Indians make shields?

Last Answer : buffulo skin

What stores sell cheap face shields?

Description : What stores sell cheap face shields?

Last Answer : There are many places where you could get face shields or goggles that would help with this problem. For example, Walmart or even online stores like ebay.com

Did Brooke Shields die?

Description : Did Brooke Shields die?

Last Answer : She didn't. As of August 23, 2011, Brooke Shields is very much alive.

Which one of the following is most prone to earthquakes? [CDS 2000] (a) Coastal plains (b) Old shields (c) Plateaus (d) Young folded mountains

Description : Which one of the following is most prone to earthquakes? [CDS 2000] (a) Coastal plains (b) Old shields (c) Plateaus (d) Young folded mountains

Last Answer : Ans: (d)

Excessive humming of AC contactors may be caused by ______________. A. burnt arc shields B. shorted armature coils C. a broken shading coil D. high voltage

Description : Excessive humming of AC contactors may be caused by ______________. A. burnt arc shields B. shorted armature coils C. a broken shading coil D. high voltage

Last Answer : Answer: C

Continents have three major features. The oldest areas of each continent are the: w) folded mountains x) stable platforms y) mountain cores z) shields

Description : Continents have three major features. The oldest areas of each continent are the: w) folded mountains x) stable platforms y) mountain cores z) shields

Last Answer : ANSWER: Z -- SHIELDS

Explain 'Ball Bearing is an Important Discovery' ?

Description : Explain 'Ball Bearing is an Important Discovery' ?

Last Answer : The use of ball bearings has made it possible to further reduce friction between different surfaces. Ball-bearing is a small , smooth metal ball. These are usually made of steel. Ball bearings are ... machine. That is, instead of sliding over each other, the surfaces roll and the friction decreases.

What is ball bearing ?

Description : What is ball bearing ?

Last Answer : Ball-bearing is a small , smooth metal ball. These are usually made of steel. Ball-bearings are placed between the moving parts of a machine. Friction between different fluids can be reduced by using ball-bearing.

What is Ball Bearing Made of ?

Description : What is Ball Bearing Made of ?

Last Answer : Ball bearings are made of steel.

What willl happen if density of ball bearing is less than density of glycerine oil?

Description : What willl happen if density of ball bearing is less than density of glycerine oil?

Last Answer : What is the answer ?

The failure of ball bearings used in electric motors can result from _____________. A. failure to clean the bearing before repacking B. failure to maintain proper alignment C. excess lubrication forcing the bearing full of grease and eliminating all areas of expansion D. all of the above

Description : The failure of ball bearings used in electric motors can result from _____________. A. failure to clean the bearing before repacking B. failure to maintain proper alignment C. excess lubrication forcing the bearing full of grease and eliminating all areas of expansion D. all of the above

Last Answer : Answer: D

The only point in the steering stand shown in the illustration which needs periodic lubrication is the ______________. EL-0098 A. repeater assembly ball bearings B. steering wheel bearing C. operation selector switch D. course selector pointer

Description : The only point in the steering stand shown in the illustration which needs periodic lubrication is the ______________. EL-0098 A. repeater assembly ball bearings B. steering wheel bearing C. operation selector switch D. course selector pointer

Last Answer : Answer: B

Function of ball bearing in a wheel is –

Description : Function of ball bearing in a wheel is –

Last Answer : to convert kinetic friction into rolling friction

Function of ball bearing in a wheel is –

Description : Function of ball bearing in a wheel is –

Last Answer : o convert kinetic friction into rolling friction

The ball bearing is subjected to a radial load of 4000 N. Expected life for 90% bearings is 9000 hr and the shaft is rot (a) 42.21 kN (b) 37.29 kN (c) 26.33 kN (d) 35.22 kN

Description : The ball bearing is subjected to a radial load of 4000 N. Expected life for 90% bearings is 9000 hr and the shaft is rot (a) 42.21 kN (b) 37.29 kN (c) 26.33 kN (d) 35.22 kN

Last Answer : (b) 37.29 kN

The life of an individual ball bearing is the time period for which it works without any signs of failures. (a) True (b) False

Description : The life of an individual ball bearing is the time period for which it works without any signs of failures. (a) True (b) False

Last Answer : (b) False

Which one of the following parts of a ball bearing acts as a barrier between the balls preventing them from bumping into each other? (a) Inner race (b) Outer race (c) Rolling element (d) Cage

Description : Which one of the following parts of a ball bearing acts as a barrier between the balls preventing them from bumping into each other? (a) Inner race (b) Outer race (c) Rolling element (d) Cage

Last Answer : (d) Cage

Which one of the following parts of a ball bearing is mounted to the housing and is stationary? (a) Inner race (b) Outer race (c) Rolling element (d) Cage

Description : Which one of the following parts of a ball bearing is mounted to the housing and is stationary? (a) Inner race (b) Outer race (c) Rolling element (d) Cage

Last Answer : (b) Outer race

Which one of the following parts of a ball bearing is mounted on the rotating shafts and tends to rotate the shaft? (a) Inner race (b) Outer race (c) Rolling element (d) Cage

Description : Which one of the following parts of a ball bearing is mounted on the rotating shafts and tends to rotate the shaft? (a) Inner race (b) Outer race (c) Rolling element (d) Cage

Last Answer : (a) Inner race

What type of bearing will you recommend for use in the conveyor belt roller? (a) Ball-bearing (b) Roller bearing (c) Magnetic bearing (d) None of the mentioned

Description : What type of bearing will you recommend for use in the conveyor belt roller? (a) Ball-bearing (b) Roller bearing (c) Magnetic bearing (d) None of the mentioned

Last Answer : (b) Roller bearing

A cylinder roller creates lesser noise than a deep groove ball bearing. (a) True (b) False

Description : A cylinder roller creates lesser noise than a deep groove ball bearing. (a) True (b) False

Last Answer : (b) False

Which of the following cannot tolerate misalignment? (a) Angular contact bearing (b) Cylinder roller bearing (c) Thrust ball bearings (d) All of the listed

Description : Which of the following cannot tolerate misalignment? (a) Angular contact bearing (b) Cylinder roller bearing (c) Thrust ball bearings (d) All of the listed

Last Answer : (d) All of the listed

Which one of the following bearing is intended for a very heavy radial load? (a) Ball bearing (b) Self-aligning roller bearing (c) Roller bearing (d) Thrust bearing

Description : Which one of the following bearing is intended for a very heavy radial load? (a) Ball bearing (b) Self-aligning roller bearing (c) Roller bearing (d) Thrust bearing

Last Answer : (b) Self-aligning roller bearing

Which of the following cannot take the radial load? (a) Cylindrical Roller bearing (b) Taper roller bearing (c) Thrust ball bearing (d) Spherical roller bearing

Description : Which of the following cannot take the radial load? (a) Cylindrical Roller bearing (b) Taper roller bearing (c) Thrust ball bearing (d) Spherical roller bearing

Last Answer : (c) Thrust ball bearing

Which of the bearings given below SHOULD NOT be subjected to a thrust load? (a) Deep groove ball bearing (b) Angular contact ball bearing (c) Cylindrical (straight) roller bearing (d) Single row tapered roller bearing

Description : Which of the bearings given below SHOULD NOT be subjected to a thrust load? (a) Deep groove ball bearing (b) Angular contact ball bearing (c) Cylindrical (straight) roller bearing (d) Single row tapered roller bearing

Last Answer : (c) Cylindrical (straight) roller bearing

Cylindrical roller bearing has a lower load capacity as compared to deep groove ball bearing. (a) True (b) False

Description : Cylindrical roller bearing has a lower load capacity as compared to deep groove ball bearing. (a) True (b) False

Last Answer : (b) False

The deep groove ball bearing has immense rigidity. (a) True (b) No, it has point contact and hence low rigidity (c) It has surface contact (d) It has line contact

Description : The deep groove ball bearing has immense rigidity. (a) True (b) No, it has point contact and hence low rigidity (c) It has surface contact (d) It has line contact

Last Answer : (b) No, it has point contact and hence low rigidity

Which bearing is Antifriction bearing A. Thick lubrication bearing B. Thin lubrication bearing C. Rolling or ball bearing D. None

Description : Which bearing is Antifriction bearing A. Thick lubrication bearing B. Thin lubrication bearing C. Rolling or ball bearing D. None

Last Answer : C. Rolling or ball bearing

Which of the following bearing is preferred for oscillating conditions? (a) Double row roller bearing (b) Taper roller bearing (c) Needle roller bearing (d) Angular contact single row ball bearing

Description : Which of the following bearing is preferred for oscillating conditions? (a) Double row roller bearing (b) Taper roller bearing (c) Needle roller bearing (d) Angular contact single row ball bearing

Last Answer : (c) Needle roller bearing

Match List -I (Bearings) with List-II (Applications) and select the using the codes given below the lists: [IAS-1998] List –I List-II A. Journal bearing 1. Electric motors B. Thrust bearing 2. Watches C. Conical pivot bearing 3. Marine engines D. Ball bearing 4. Swivelling chairs A B C D A B C D (a) 3 4 1 2 (b) 4 2 1 3 (c) 3 4 2 1 (d) 4 2 3 1

Description : Match List -I (Bearings) with List-II (Applications) and select the using the codes given below the lists: [IAS-1998] List -I List-II A. Journal bearing 1. Electric motors B. Thrust bearing 2. Watches C. Conical pivot bearing 3. Marine ... D (a) 3 4 1 2 (b) 4 2 1 3 (c) 3 4 2 1 (d) 4 2 3 1

Last Answer : (c) 3 4 2 1

The most suitable bearing for carrying very heavy loads with slow speed is (a) Hydrodynamic bearing (b) ball bearing [IAS 1994] (c) Roller bearing (d) hydrostatic bearing

Description : The most suitable bearing for carrying very heavy loads with slow speed is (a) Hydrodynamic bearing (b) ball bearing [IAS 1994] (c) Roller bearing (d) hydrostatic bearing

Last Answer : (d) hydrostatic bearing

Match List-I (Type of Anti-friction bearing) with List-II (Specific Use) and select the using the code given below the Lists: [IES-2006] List-I List -II A. Self-aligning ball bearing 1. For pure axial load B. Taper roller bearing 2. For hinged condition C. Deep groove ball bearing 3. For pure radial load D. Thrust ball bearing 4. For axial and radial load A B C D A B C D (a) 2 1 3 4 (b) 3 4 2 1 (c) 2 4 3 1 (d) 3 1 2 4

Description : Match List-I (Type of Anti-friction bearing) with List-II (Specific Use) and select the using the code given below the Lists: [IES-2006] List-I List -II A. Self-aligning ball bearing 1. For pure axial load B. Taper roller bearing 2. For ... C D (a) 2 1 3 4 (b) 3 4 2 1 (c) 2 4 3 1 (d) 3 1 2 4

Last Answer : (c) 2 4 3 1

Match List I with List II and select the : [IES-2002] List I (Bearings) List II (Load type) A. Hydrodynamic Journal bearing 1. High radial and thrust load combined B. Rectangular Hydrostatic bearing 2. Radial load only C. Taper Roller bearing 3. Thrust load only D. Angular contact ball bearing 4. Medium to low radial and thrust combined A B C D A B C D (a) 2 3 1 4 (b) 4 1 3 2 (c) 2 1 3 4 (d) 4 3 1 2

Description : Match List I with List II and select the : [IES-2002] List I (Bearings) List II (Load type) A. Hydrodynamic Journal bearing 1. High radial and thrust load combined B. Rectangular Hydrostatic bearing 2. Radial load only C. Taper Roller ... (a) 2 3 1 4 (b) 4 1 3 2 (c) 2 1 3 4 (d) 4 3 1 2

Last Answer : (a) 2 3 1 4

The life of an individual ball bearing is the time period for which it works without any signs of failures. a) True b) False

Description : The life of an individual ball bearing is the time period for which it works without any signs of failures. a) True b) False

Last Answer : b) False

Cylinder roller creates lesser noise than deep groove ball bearing. a) True b) False

Description : Cylinder roller creates lesser noise than deep groove ball bearing. a) True b) False

Last Answer : b) False

Which of the following cannot tolerate misalignment? a) Angular contact bearing b) Cylinder roller bearing c) Thrust ball bearings d) All of the listed

Description : Which of the following cannot tolerate misalignment? a) Angular contact bearing b) Cylinder roller bearing c) Thrust ball bearings d) All of the listed

Last Answer : d) All of the listed

Which of the following cannot take radial load? a) Cylindrical Roller bearing b) Taper roller bearing c) Thrust ball bearing d) None of the listed

Description : Which of the following cannot take radial load? a) Cylindrical Roller bearing b) Taper roller bearing c) Thrust ball bearing d) None of the listed

Last Answer : c) Thrust ball bearing

Cylindrical load bearing has lower load capacity as compared to deep groove ball bearing. a) True b) False

Description : Cylindrical load bearing has lower load capacity as compared to deep groove ball bearing. a) True b) False

Last Answer : b) False

Deep groove ball bearing has immense rigidity. a) True b) No it has point contact and hence low rigidity c) It has surface contact d) It has line contact

Description : Deep groove ball bearing has immense rigidity. a) True b) No it has point contact and hence low rigidity c) It has surface contact d) It has line contact

Last Answer : b) No it has point contact and hence low rigidity

The bearings which resist radial loads is known as a) Ball bearing b) bush bearing c) thrust bearing d) journal bearing

Description : The bearings which resist radial loads is known as a) Ball bearing b) bush bearing c) thrust bearing d) journal bearing

Last Answer : d) journal bearing

A bearing designed to resist axial load is known as a) Ball bearing b) bush bearing c) thrust bearing d) journal bearing

Description : A bearing designed to resist axial load is known as a) Ball bearing b) bush bearing c) thrust bearing d) journal bearing

Last Answer : c) thrust bearing

The life of a ball bearing is inversely proportional to (A) (Load)1 (B) (Load)2 (C) (Load)3 (D) (Load)0.33

Description : The life of a ball bearing is inversely proportional to (A) (Load)1 (B) (Load)2 (C) (Load)3 (D) (Load)0.33

Last Answer : (C) (Load)3

Why A Sleeve Is Fitted On A Ball Bearing?

Description : Why A Sleeve Is Fitted On A Ball Bearing?

Last Answer : To prevent relative axial movement between the shaft and the bearing.