Explain The Valve Parts?

Explain The Valve Parts?
by

1 Answer

Answer :

Gate Valve – Body, Bonnet, Seat, Gate, Stem, Hand Wheel, Gland Bush, Gland Flange, Gland Bolt and Nuts. Hand Wheel lock nut.
Ball Valve – Body , End Piece , Ball , Stem , Seal , Seal Follower , Seat , Lock Nut , Handle Gland Packing , Gland Flange , Gland Stud and nut.

Globe Valve – Body , Bonnet , Seat , Plug , stem , Hand Wheel , Lock Nut ,Gland Packing , Gland Flange , Gland Stud and nut.

Butterfly – Body , Disc , Stem , Seat ring , Seat ring holder , Bush , End cover , Hand Wheel or Gear Box , Gland Bush , Gland Packing , Gland Flange , Gland Stud and nut.
by

Related questions

The torque of 50 Nm is applied on the wheel operating a valve. If the wheel is rotated through two revolutions, work done in Newton-metres is given by a.628 b.107 dynes c.314 d.25 e.100

Description : The torque of 50 Nm is applied on the wheel operating a valve. If the wheel is rotated through two revolutions, work done in Newton-metres is given by a.628 b.107 dynes c.314 d.25 e.100

Last Answer : a. 628

What should be done to prevent a safety valve to stick to its seat ?

Description : What should be done to prevent a safety valve to stick to its seat ?

Last Answer : Safety valve should be blown off periodically so that no corrosion can take place on valve and valve seat.

Dry saturated steam can be converted into superheated steam by (A) Increasing its cross-sectional area of flow (B) Passing it through a pressure reducing valve (C) Forcing it downwards through a vertical tube (D) None of these

Description : Dry saturated steam can be converted into superheated steam by (A) Increasing its cross-sectional area of flow (B) Passing it through a pressure reducing valve (C) Forcing it downwards through a vertical tube (D) None of these

Last Answer : (B) Passing it through a pressure reducing valve

Define Valve?

Description : Define Valve?

Last Answer : Valve is a Mechanical flow control element in the process.

Why Does The Safety Valve On My Tank Blow Off?

Description : Why Does The Safety Valve On My Tank Blow Off?

Last Answer : This is caused by a pressure switch improperly installed, set too high or malfunctioning. Safety valves do not normally fail on their own.

Why Does The Safety Valve On My Compressor Pump Make A "popping" Sound?

Description : Why Does The Safety Valve On My Compressor Pump Make A "popping" Sound?

Last Answer : This is most commonly an indication of bad valves. Depending on the model valves could be rebuilt or replaced.

Device to control the pressure of fluid and gases within range of settings. a. Relief valve. c. Filter b. Spray gun. d. Pressure regulator

Description : Device to control the pressure of fluid and gases within range of settings. a. Relief valve. c. Filter b. Spray gun. d. Pressure regulator

Last Answer : Pressure regulator

Component to remove suspended matter large than a predetermined size from fluid. a. Relief valve. c. Filter b. Spray gun. d. Nozzle

Description : Component to remove suspended matter large than a predetermined size from fluid. a. Relief valve. c. Filter b. Spray gun. d. Nozzle

Last Answer : Filter

State the function of the following parts in a heat engine: a) Crank shaft b) spark plug c) carburettord) kick starter e) inlet valve f) outlet valve

Description : State the function of the following parts in a heat engine: a) Crank shaft b) spark plug c) carburettord) kick starter e) inlet valve f) outlet valve

Last Answer : a) Crankshaft converts the linear movement of piston into circular motion. b) Spark plug is used in petrol engine to ignite the mixture of petrol and air in the cylinder. c) Carburettorhelps to mix ... -air or air into the cylinder. f) Outlet Valve allows the exhaust gases out of the cylinder.

What are the four basic parts of any valve actuators?

Description : What are the four basic parts of any valve actuators?

Last Answer : a. Valve motor. b. Gear mechanism. c. Limit switch and torque switch assembly. d. Terminal box. 

What are wetted parts of valve?

Description : What are wetted parts of valve?

Last Answer : Answer: All parts that come in contact with surface fluid are called wetted parts.

What are wetted parts of valve?

Description : What are wetted parts of valve?

Last Answer : Answer: All parts that come in contact with surface fluid are called wetted parts.

Which of the following is not the method of part family formation a.Visual inspection method b.Automatic product sorting c.Parts classification & coding d.Production flow analysis

Description : Which of the following is not the method of part family formation a.Visual inspection method b.Automatic product sorting c.Parts classification & coding d.Production flow analysis

Last Answer : b.Automatic product sorting

From the following which is the function of material handling system used in FMS a.Handling of parts with different variety b.Independent movement of part between stations c.Both A & B d.None of the above

Description : From the following which is the function of material handling system used in FMS a.Handling of parts with different variety b.Independent movement of part between stations c.Both A & B d.None of the above

Last Answer : b.Independent movement of part between stations

From the following which is the step of machine cell design? a.Divide parts into part families b.Select type of machine cell c.Prepare a composite part d.All of the above

Description : From the following which is the step of machine cell design? a.Divide parts into part families b.Select type of machine cell c.Prepare a composite part d.All of the above

Last Answer : d.All of the above

____ is a collection of parts which have similar characteristics a.Part family b.Mono family c.GT family d.Poly family

Description : ____ is a collection of parts which have similar characteristics a.Part family b.Mono family c.GT family d.Poly family

Last Answer : a.Part family

____ is a manufacturing philosophy in which different parts are manufactured in a small batchor group based on similarities a.Production technology b.Group technology c.Flexible manufacturing system d.None of the above

Description : ____ is a manufacturing philosophy in which different parts are manufactured in a small batchor group based on similarities a.Production technology b.Group technology c.Flexible manufacturing system d.None of the above

Last Answer : b.Group technology

Which of the following are examples of appropriate applications of additive manufacturing inthe actual production of parts and products? a.Castings made in small quantities b.Plastic parts in small batch sizes c.Mass-produced metal parts d.Special textile products

Description : Which of the following are examples of appropriate applications of additive manufacturing inthe actual production of parts and products? a.Castings made in small quantities b.Plastic parts in small batch sizes c.Mass-produced metal parts d.Special textile products

Last Answer : b.Plastic parts in small batch sizes

Numerical control a.applies only to milling machines b.is a method for producing exact number of parts per hour c.is a method for controlling by means of set of instructions d.None of the mentioned

Description : Numerical control a.applies only to milling machines b.is a method for producing exact number of parts per hour c.is a method for controlling by means of set of instructions d.None of the mentioned

Last Answer : c.is a method for controlling by means of set of instructions

To find the nodal displacements in all parts of the element, are used. a.shape function b.node function c.element function d.coordinate function

Description : To find the nodal displacements in all parts of the element, are used. a.shape function b.node function c.element function d.coordinate function

Last Answer : a.shape function

To solve the FEM problem, it subdivides a large problem into smaller, simpler parts that arecalled a.static elements b.dynamic elements c.infinite elements d.finite elements

Description : To solve the FEM problem, it subdivides a large problem into smaller, simpler parts that arecalled a.static elements b.dynamic elements c.infinite elements d.finite elements

Last Answer : d.finite elements

A number of forces acting at a point will be in equilibrium if a.Sum of the forces is zero b.Algebraic sum of the forces is zero c.Sum of the resolved parts in any two perpendicular directions are both zero d.None of the above e.The metacentre of the body

Description : A number of forces acting at a point will be in equilibrium if a.Sum of the forces is zero b.Algebraic sum of the forces is zero c.Sum of the resolved parts in any two perpendicular directions are both zero d.None of the above e.The metacentre of the body

Last Answer : d. None of the above

The moving parts of a machine which weigh 1 tonne perform vertical simple harmonic motion with an amplitude of 2.5 cm and a period of 0.5 sec. The base of the machine weighs 3 tonnes and rests on the ground. Maximum reactions on the ground would be a.3.6 tonnes b.2.4 tonnes c.4.0 tonnes d.4.8 tonnes e.4.4 tonnes

Description : The moving parts of a machine which weigh 1 tonne perform vertical simple harmonic motion with an amplitude of 2.5 cm and a period of 0.5 sec. The base of the machine weighs 3 tonnes and rests on the ground. Maximum ... would be a.3.6 tonnes b.2.4 tonnes c.4.0 tonnes d.4.8 tonnes e.4.4 tonnes

Last Answer : e. 4.4 tonnes

For which parts the Wahl factor and Lewis form factor used ?

Description : For which parts the Wahl factor and Lewis form factor used ?

Last Answer : For springs and gears respectively.

Give The Parts Name Of Psv?

Description : Give The Parts Name Of Psv?

Last Answer :  Body  Bonnet  Nozzle  Disc  Disc Holder  Stem  Blow down ring  Blow down ring lock screw  Spring Bottom Plate  Spring  Spring Top Plate  Control Screw  Lock Nut  Cap  Gasket

Different parts of Thresher are A) Feeding device B) Threshing cylinder C) Concave D) All of the above.

Description : Different parts of Thresher are A) Feeding device B) Threshing cylinder C) Concave D) All of the above.

Last Answer : All of the above.

Jointer and coulter are the parts of :- A. Disc plough C. Indigenous plough B. Harrow plough D. MB plough

Description : Jointer and coulter are the parts of :- A. Disc plough C. Indigenous plough B. Harrow plough D. MB plough

Last Answer : MB plough

Power saving guide label is stickled on_______ A. Internal parts of AC C. On condenser and compressor B. External cover of AC D. On back cover of AC

Description : Power saving guide label is stickled on_______ A. Internal parts of AC C. On condenser and compressor B. External cover of AC D. On back cover of AC

Last Answer : External cover of AC

The thermodynamic property of a system is said to be an intensive property whose value for the entire system __________ the sum of their value for the individual parts of the system.  A. is equal to  B. is not equal to

Description : The thermodynamic property of a system is said to be an intensive property whose value for the entire system __________ the sum of their value for the individual parts of the system.  A. is equal to  B. is not equal to

Last Answer : Answer: B

On volume basis, air contains following parts of oxygen  (a) 21  (b) 23  (c) 25  (d) 77  (e) 79.

Description : On volume basis, air contains following parts of oxygen  (a) 21  (b) 23  (c) 25  (d) 77  (e) 79.

Last Answer : Answer : a

On weight basis, air contains following parts of oxygen  (a) 21  (b) 23  (c) 25  (d) 73  (e) 79.

Description : On weight basis, air contains following parts of oxygen  (a) 21  (b) 23  (c) 25  (d) 73  (e) 79.

Last Answer : Answer : b