Dry saturated steam can be converted into superheated steam by (A) Increasing its cross-sectional area of flow (B) Passing it through a pressure reducing valve (C) Forcing it downwards through a vertical tube (D) None of these

Dry saturated steam can be converted into superheated steam by (A) Increasing its cross-sectional area of flow
(B) Passing it through a pressure reducing valve
(C) Forcing it downwards through a vertical tube
(D) None of these
by

1 Answer

Answer :

(B) Passing it through a pressure reducing valve
by

Related questions

For which of the following substances, the gas laws can be used with minimum error  (a) dry steam  (b) wet steam  (c) saturated steam  (d) superheated steam  (e) steam at atmospheric pressure.

Description : For which of the following substances, the gas laws can be used with minimum error  (a) dry steam  (b) wet steam  (c) saturated steam  (d) superheated steam  (e) steam at atmospheric pressure.

Last Answer : Answer : d

Saturated steam at a pressure of 25 kg/cm2is throttled to attain 5 kg/cm2. Then the outcoming steam will be (A) Wet (B) Saturated (C) Superheated (D) None of these

Description : Saturated steam at a pressure of 25 kg/cm2is throttled to attain 5 kg/cm2. Then the outcoming steam will be (A) Wet (B) Saturated (C) Superheated (D) None of these

Last Answer : C) Superheated

Pick out the wrong statement. (A) In process heat exchangers, saturated steam is preferred over the superheated steam (B) The maximum is the emissive power of a surface at a temperature T1 occurs at a wavelength of λ1 . If the surface temperature is halved, the maximum in the emissive power would occur at a wavelength of 0.5 λ1 (C) When a vertical plate is heated in infinite air environmental under natural convection conditions, the velocity profile in air, normal to the plate, exhibits a maximum

Description : Pick out the wrong statement. (A) In process heat exchangers, saturated steam is preferred over the superheated steam (B) The maximum is the emissive power of a surface at a temperature T1 ... under natural convection conditions, the velocity profile in air, normal to the plate, exhibits a maximum

Last Answer : (B) The maximum is the emissive power of a surface at a temperature T1 occurs at a wavelength of λ1 . If the surface temperature is halved, the maximum in the emissive power would occur at a wavelength of 0.5 λ1

What type of steam is generated by evaporator tube of Lamont boiler ? a. Saturated steam b. Unsaturated steam c. Superheated steam d. Flash steam

Description : What type of steam is generated by evaporator tube of Lamont boiler ? a. Saturated steam b. Unsaturated steam c. Superheated steam d. Flash steam

Last Answer : a. Saturated steam

For which of the following substances, the internal energy and enthalpy are the functions of temperature only  (a) any gas  (b) saturated steam  (c) water  (d) perfect gas  (e) superheated steam.

Description : For which of the following substances, the internal energy and enthalpy are the functions of temperature only  (a) any gas  (b) saturated steam  (c) water  (d) perfect gas  (e) superheated steam.

Last Answer : Answer : d

The most economical channel section for the fluid flow is the one for which the discharge is maximum for a given cross-sectional area. Vertical velocity distribution in an open channel for laminar flow can be assumed to be (A) Parabolic (B) Hyperbolic (C) Straight line (D) None of these

Description : The most economical channel section for the fluid flow is the one for which the discharge is maximum for a given cross-sectional area. Vertical velocity distribution in an open channel for laminar flow can be assumed to be (A) Parabolic (B) Hyperbolic (C) Straight line (D) None of these

Last Answer : (A) Parabolic

Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger, the shell pressure drop is maximum for orifice baffles (C) S.I. unit of fouling factor is Watt/m2 .°K (D) Longitudinal fins are used in extended surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Description : Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger ... surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Last Answer : (C) S.I. unit of fouling factor is Watt/m2 .°K

Saturated steam at 1 atm is discharged from a turbine at 1200 kg/h. Superheated steam at 300 0C and 1 atm is needed as a feed to a heat exchanger. To produce it, the turbine discharge stream is mixed with superheated steam at 400 0C, 1 atm and specific volume of 3.11 m 3 /kg. Calculate the amount of superheated steam at 300 0C produced and the volumetric flow rate of the 400 0C steam.

Description : Saturated steam at 1 atm is discharged from a turbine at 1200 kg/h. Superheated steam at 300 0C  and 1 atm is needed as a feed to a heat exchanger. To produce it, the turbine discharge ... amount of superheated steam at 300 0C produced and the volumetric flow rate of the  400 0C steam.

Last Answer : Solution 1. Mass balance of water 1200 + m1 = m2 ………………………………………… (1) …………………….1 mark 2. Energy balance (1200 kg/h)(2676 kJ/kg) + m1(3278 kJ/kg)

In vapour compression cycle the condition off refrigerant is dry saturated vapour (a) after passing through the condenser (b) before passing through the condenser (c)before entering the expansion valve (d) before entering the compressor

Description : In vapour compression cycle the condition off refrigerant is dry saturated vapour (a) after passing through the condenser (b) before passing through the condenser (c)before entering the expansion valve (d) before entering the compressor

Last Answer : Ans: D

In vapour compression cycle the condition of refrigerant is superheated vapour (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) beforeentering the expansion valve

Description : In vapour compression cycle the condition of refrigerant is superheated vapour (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) beforeentering the expansion valve

Last Answer : Ans: b

Coolant present in the primary circuit of a pressurised water reactor is high pressure (A) Sub cooled water (B) Saturated water (C) Superheated steam (D) Saturated steam

Description : Coolant present in the primary circuit of a pressurised water reactor is high pressure (A) Sub cooled water (B) Saturated water (C) Superheated steam (D) Saturated steam

Last Answer : (B) Saturated wate

Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) The rate of flow of water through a vertical strip of the aquifer of unit width and full depth under a unit hydraulic gradient, is called coefficient of transmissibility (C) The flow of water through aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Description : Pick up the incorrect statement from the following: (A) The rate of flow of water through a unit cross-sectional area under a unit hydraulic gradient, is called coefficient of permeability (B) ... aquifers, is governed by the Darcy's law (D) The term 'transmissibility' was introduced by Meinzer

Last Answer : Answer: Option D

Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger calculations (Δt) weighted is used in place of Δt, when it involves more than one sequence of heating or cooling i.e., desuperheating & condensation or condensation & sub-cooling (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted (D) In case of short tube vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

__________________ is a vapor having a temperature higher than the saturation temperature corresponding to the existing pressure.  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Description : __________________ is a vapor having a temperature higher than the saturation temperature corresponding to the existing pressure.  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Last Answer : Superheated Vapor

___________________ is a vapor at the saturation conditions (saturation temperature and saturation pressure).  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Description : ___________________ is a vapor at the saturation conditions (saturation temperature and saturation pressure).  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Last Answer : Saturated Vapor

In vapour compression cycle, the condition of refrigerant is high pressure saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) before entering the expansion valve

Description : In vapour compression cycle, the condition of refrigerant is high pressure saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) before entering the expansion valve

Last Answer : Ans: d

Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 kJ/kg. K) The exit condition of steam is (A) Superheated vapour (B) Partially condensed vapour with quality of 0.9 (C) Saturated vapour (D) Partially condensed vapour with quality of 0.1

Description : Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 ... vapour with quality of 0.9 (C) Saturated vapour (D) Partially condensed vapour with quality of 0.1

Last Answer : (A) Superheated vapour

Which of the following approaches the ideal gas behaviour most closely? (A) Wet steam (B) Saturated steam (C) Superheated steam (D) Saturated water

Description : Which of the following approaches the ideal gas behaviour most closely? (A) Wet steam (B) Saturated steam (C) Superheated steam (D) Saturated water

Last Answer : Option C

Represent generation of steam on H-S diagram. Show constant dryness fraction lines, constant temperature lines, saturated line and superheated region on the same.

Description : Represent generation of steam on H-S diagram. Show constant dryness fraction lines, constant temperature lines, saturated line and superheated region on the same.

Last Answer : Represent generation of steam on H-S diagram. Show constant dryness fraction lines, constant temperature lines, saturated line and superheated region on the same.

A current of 5 ampere is passing through a metallic wire of cross-sectional area `4xx10^(-6) m^(2)`. If the density of the charge-carriers in the wire

Description : A current of 5 ampere is passing through a metallic wire of cross-sectional area `4xx10^(-6) m^(2)`. If the density of the charge-carriers in the wire

Last Answer : A current of 5 ampere is passing through a metallic wire of cross-sectional area `4xx10^(-6) m^(2)`. If the ... ms^(-1)` D. `1xx10^(-2)ms^(-1)`

_________________ is a combination of saturated vapor and saturated liquid.  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Description : _________________ is a combination of saturated vapor and saturated liquid.  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Last Answer : Wet Vapor

_________________ is the name given to a gaseous phase that is in contact with the liquid phase, or that is in the vicinity of a state where some of it might be condensed.  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Description : _________________ is the name given to a gaseous phase that is in contact with the liquid phase, or that is in the vicinity of a state where some of it might be condensed.  a) Vapor  b) Saturated Vapor  c) Superheated Vapor  d) Wet Vapor

Last Answer : Vapor

Which is NOT a correct statement?  A. A superheated vapor will not condense when small amount of heat re removed  B. An ideal gas is a gas that is not a superheated vapor  C. A saturated liquid can absorb as much heat as it can without vaporizing  D. Water at 1 atm and room temperature is subcooled

Description : Which is NOT a correct statement?  A. A superheated vapor will not condense when small amount of heat re removed  B. An ideal gas is a gas that is not a superheated vapor  C. A saturated ... absorb as much heat as it can without vaporizing  D. Water at 1 atm and room temperature is subcooled

Last Answer : An ideal gas is a gas that is not a superheated vapor

A vapor that is not about to condense is called _____ vapor.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Description : A vapor that is not about to condense is called _____ vapor.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Last Answer : Superheated

A vapor that is about to condense is called ______ vapor.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Description : A vapor that is about to condense is called ______ vapor.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Last Answer : Saturated

A liquid that is about to vaporize is called ______ liquid.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Description : A liquid that is about to vaporize is called ______ liquid.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Last Answer : Saturated

When water exists in the liquid phase and is not about to vaporize, it is considered as _____liquid.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Description : When water exists in the liquid phase and is not about to vaporize, it is considered as _____liquid.  A. Saturated  B. Compressed or subcooled  C. Superheated  D. Unsaturated

Last Answer : Compressed or subcooled

In vapour compression cycle, the condition of refrigerant is saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion throttle valve (d) before entering the expansion valve

Description : In vapour compression cycle, the condition of refrigerant is saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion throttle valve (d) before entering the expansion valve

Last Answer : Ans: a

The pressure drop per unit length for laminar flow of fluid through a long pipe is proportional to (where, A = cross-sectional area of the pipe & D = Diameter of the pipe) (A) A (B) D (C) 1/A (D) 1/A2

Description : The pressure drop per unit length for laminar flow of fluid through a long pipe is proportional to (where, A = cross-sectional area of the pipe & D = Diameter of the pipe) (A) A (B) D (C) 1/A (D) 1/A2

Last Answer : (C) 1/A

Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs (D) Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

The relative saturation of a partially saturated mixture of vapour and gas can be increased by __________ of the mixture. (A) Reducing the total pressure (B) Increasing the total pressure (C) Reducing the temperature (D) Both (B) and (C)

Description : The relative saturation of a partially saturated mixture of vapour and gas can be increased by __________ of the mixture. (A) Reducing the total pressure (B) Increasing the total pressure (C) Reducing the temperature (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Whether superheated steam can be treated like ideal gas ?

Description : Whether superheated steam can be treated like ideal gas ?

Last Answer : Yes.

Superheated vapour behaves  (a) exactly as gas  (b) as steam  (c) as ordinary vapour  (d) approximately as a gas  (e) as average of gas and vapour.

Description : Superheated vapour behaves  (a) exactly as gas  (b) as steam  (c) as ordinary vapour  (d) approximately as a gas  (e) as average of gas and vapour.

Last Answer : Answer : d

In a co-current double pipe heat exchanger used for condensing saturated steam over the inner tube, if the entrance and exit conditions of the coolant are interchanged, then the rate of condensation will (A) Increase (B) Decrease (C) Remain unchanged (D) Either increase or decrease; depends on the coolant flow rate

Description : In a co-current double pipe heat exchanger used for condensing saturated steam over the inner tube, if the entrance and exit conditions of the coolant are interchanged, then the rate of condensation ... Decrease (C) Remain unchanged (D) Either increase or decrease; depends on the coolant flow rate

Last Answer : (C) Remain unchanged

For a given set of operating pressure limits of a Rankine cycle, the highest, efficiency occurs for [GATE-1994] (a) Saturated cycle (b) Superheated cycle (c) Reheat cycle (d) Regenerative cycle.

Description : For a given set of operating pressure limits of a Rankine cycle, the highest, efficiency occurs for [GATE-1994] (a) Saturated cycle (b) Superheated cycle (c) Reheat cycle (d) Regenerative cycle. 

Last Answer : (d) Regenerative cycle. 

Water contained in a beaker can be made to boil by passing steam through it  (a) at atmospheric pressure  (b) at a pressure below the firuosphejric pressure  (c) at a pressure greater than atmospheric pressure  (d) any pressure  (e) not possible.

Description : Water contained in a beaker can be made to boil by passing steam through it  (a) at atmospheric pressure  (b) at a pressure below the firuosphejric pressure  (c) at a pressure greater than atmospheric pressure  (d) any pressure  (e) not possible.

Last Answer : Answer : c

With diminishing cross-sectional area in case of subsonic flow in a converging nozzle, the (A) Velocity increases (B) Pressure decreases (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : With diminishing cross-sectional area in case of subsonic flow in a converging nozzle, the (A) Velocity increases (B) Pressure decreases (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The condition of refrigerant before entering the expansion or throttle valve, in a vapour compression system (a) dry vapour (b) wet vapour (c)liquid-vapour mixture (d) high pressure saturated liquid

Description : The condition of refrigerant before entering the expansion or throttle valve, in a vapour compression system (a) dry vapour (b) wet vapour (c)liquid-vapour mixture (d) high pressure saturated liquid

Last Answer : Ans: d

A tube of uniform cross sectional sectional area `1 cm^(2)` is closed at one end with semi permeable membrane. A solution having 6g glucose per 100 ml

Description : A tube of uniform cross sectional sectional area `1 cm^(2)` is closed at one end with semi permeable membrane. A solution having 6g glucose per 100 ml

Last Answer : A tube of uniform cross sectional sectional area `1 cm^(2)` is closed at one end with semi permeable membrane. A ... k^(-1)`, density of Hg=13.8 g/cc)

For specified tube outside diameter, higher BWG means higher (A) Tube thickness (B) Cross-sectional area (C) Weight per unit length (D) None of these

Description : For specified tube outside diameter, higher BWG means higher (A) Tube thickness (B) Cross-sectional area (C) Weight per unit length (D) None of these

Last Answer : (B) Cross-sectional area

lf the wire which is vertical to this page has electron flow downwards the conductor will have

Description : lf the wire which is vertical to this page has electron flow downwards the conductor will have

Last Answer : lf the wire which is vertical to this page has electron flow downwards the conductor will have a counter-clockwise field in the plane of the paper

A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the force exerted by the jet on the plate would be in the range a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Description : A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the ... a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Last Answer : a. 15 - 20 kg

It is not preferable to use superheated steam in evaporators, because of its very (A) High temperature (B) High pressure (C) Low film co-efficient (D) None of these

Description : It is not preferable to use superheated steam in evaporators, because of its very (A) High temperature (B) High pressure (C) Low film co-efficient (D) None of these

Last Answer : (C) Low film co-efficient

In a constant pressure process steam is generated from 10 bar and 0.8 dry condition till it become dry and saturated. Determine amount of heat added per kg of steam. From steam table at 10 bar Tsat = 179.9°C hf = 762.6 kl/kg, hg = 2776.2 kJ/kg

Description : In a constant pressure process steam is generated from 10 bar and 0.8 dry condition till it become dry and saturated. Determine amount of heat added per kg of steam. From steam table at 10 bar Tsat = 179.9°C hf = 762.6 kl/kg, hg = 2776.2 kJ/kg 

Last Answer : Constant pressure process Final condition of steam is dry saturated Enthalpy of dry steam = hg= hf + hfg =2776.2 KJ/Kg .Given Latent heat of vaporization = hfg = hg - hf =2776.2-762.6 =2013.6 KJ/Kg Initial condition ... hfg = 762.6+0.8 X 2013.6 =2373.48 KJ/Kg Heat added = hg-hw = 402.72 KJ/kg

Determine the amount of heat required to produce 1Kg of steam at a pressure of 7 bar, at a temperature 29 degree Celsius, under the following . (i) When the steam is wet having dryness fraction 0.87 (ii) When the steam is dry saturated Assume specific heat = 2.35KJ/KgK

Description : Determine the amount of heat required to produce 1Kg of steam at a pressure of 7 bar, at a temperature 29 degree Celsius, under the following . (i) When the steam is wet having dryness fraction 0.87 (ii) When the steam is dry saturated Assume specific heat = 2.35KJ/KgK 

Last Answer : P 7bar T 29ᵒC x=0.9 m =1kg C p =2.35 KJ/KgK At pressure 7 bar saturation Temp T sat =165 ᵒC h f =697.2 KJ/Kg h fg= 2064.8 KJ/Kg i) Heat required when steam is wet ... ) When the stem is dry saturated hg=hf+hfg =2762 kj Heat actually required = 2762-121.8 = 2640.2 kj

One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Description : One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Last Answer : (B) Evaporate the water

____________ is the average rate of transmission of sound energy in a given direction through a cross sectional area of 1 sq.m. at right angle to the direction. A. Sound pressure B. Sound intensity C. Pressure variation D. Loudness

Description : ____________ is the average rate of transmission of sound energy in a given direction through a cross sectional area of 1 sq.m. at right angle to the direction. A. Sound pressure B. Sound intensity C. Pressure variation D. Loudness

Last Answer : B. Sound intensity

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

The film co-efficient is decreased due to the presence of non-condensing gases in the vapors. The film co-efficient of superheated vapor as compared to that of saturated vapor is (A) More (B) Less (C) Some (D) Either more or less; depends on the nature of vapor

Description : The film co-efficient is decreased due to the presence of non-condensing gases in the vapors. The film co-efficient of superheated vapor as compared to that of saturated vapor is (A) More (B) Less (C) Some (D) Either more or less; depends on the nature of vapor

Last Answer : (C) Some

Adiabatic compression of a saturated water vapour makes it (A) Supersaturated (B) Superheated (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Adiabatic compression of a saturated water vapour makes it (A) Supersaturated (B) Superheated (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : B) Superheated