Why Does The Safety Valve On My Tank Blow Off?

Why Does The Safety Valve On My Tank Blow Off?
by

1 Answer

Answer :

This is caused by a pressure switch improperly installed, set too high or malfunctioning.
Safety valves do not normally fail on their own.
by

Related questions

. Name the safety device used to protect the boiler, when the water level falls below a minimum level. (A) Blow down valve (B) Blow off cock (C) Fusible plug (D) Safety valve

Description : . Name the safety device used to protect the boiler, when the water level falls below a minimum level. (A) Blow down valve (B) Blow off cock (C) Fusible plug (D) Safety valve

Last Answer : (C) Fusible plug

1998 Volkswagen jetta VR6, where is my blow off valve stock?

Description : 1998 Volkswagen jetta VR6, where is my blow off valve stock?

Last Answer : Is it the 1.9, 2.0 , or 2.8?

Which of the following is a boiler accessory i.e., not a boiler mounting? (A) Blow off cock (B) Feed check valve (C) Feed water pump (D) Stop valve

Description : Which of the following is a boiler accessory i.e., not a boiler mounting? (A) Blow off cock (B) Feed check valve (C) Feed water pump (D) Stop valve

Last Answer : (C) Feed water pump

What are blow off valve?

Description : What are blow off valve?

Last Answer : Answer: It is a variety of globe valve confirming with boiler code requirements and specially designed for boiler blowoff service. WYE pattern and angle type, used to remove air and other gases from boilers etc.

What should be done to prevent a safety valve to stick to its seat ?

Description : What should be done to prevent a safety valve to stick to its seat ?

Last Answer : Safety valve should be blown off periodically so that no corrosion can take place on valve and valve seat.

Why Does The Safety Valve On My Compressor Pump Make A "popping" Sound?

Description : Why Does The Safety Valve On My Compressor Pump Make A "popping" Sound?

Last Answer : This is most commonly an indication of bad valves. Depending on the model valves could be rebuilt or replaced.

The hammer blow in pipes occurs when (A) There is excessive leakage in the pipe (B) The pipe bursts under high pressure of fluid(C) The flow of fluid through the pipe is suddenly brought to rest by closing of the valve (D) The flow of fluid through the pipe is gradually brought to rest by closing of the valve

Description : The hammer blow in pipes occurs when (A) There is excessive leakage in the pipe (B) The pipe bursts under high pressure of fluid (C) The flow of fluid through the pipe is suddenly brought to ... valve (D) The flow of fluid through the pipe is gradually brought to rest by closing of the valve

Last Answer : Answer: Option C

Can one tank blow up everything in the galaxy?

Description : Can one tank blow up everything in the galaxy?

Last Answer : Nothing within human power can blow up everything in thegalaxy.

A Hybrid Vehicle equipped with push button start will enter the power ON mode but will not enter the ready to drive mode .No diagnostic trouble code are stored this could cause by a) The high voltage safety plug is removed b) A failed brake on/off switch c) An empty fuel tank d) A disconnect 12v battery

Description : A Hybrid Vehicle equipped with push button start will enter the power ON mode but will not enter the ready to drive mode .No diagnostic trouble code are stored this could cause by a) The high voltage safety ... removed b) A failed brake on/off switch c) An empty fuel tank d) A disconnect 12v battery

Last Answer : b) A failed brake on/off switch

Buying a 102 decibel whistle for walking my dog and wonder if I have to blow it for safety, if the dog's ears and my ears will be okay?

Description : Buying a 102 decibel whistle for walking my dog and wonder if I have to blow it for safety, if the dog's ears and my ears will be okay?

Last Answer : I can’t imagine an emergency in which you would need that kind of whistle. If you have a true emergency in which someone is attacking you, I would have a can of pepper spray instead of a whistle.

Which of the following statements is true concerning the cleaning of electrical contacts? A. Compressed air should be used to blow out metallic dust. B. Magnetic brushes should be used to remove metallic dust. C. The contact surfaces should be greased to increase contact resistance. D. Delicate parts should be cleaned with a brush and an approved safety solvent.

Description : Which of the following statements is true concerning the cleaning of electrical contacts? A. Compressed air should be used to blow out metallic dust. B. Magnetic brushes should be used to remove ... contact resistance. D. Delicate parts should be cleaned with a brush and an approved safety solvent.

Last Answer : Answer: D

A hydraulic accumulator comprises of (A) A storage device and a control valve (B) A cylinder and a plunger (C) Two pistons and two cylinders (D) A storage tank and a ram pump

Description : A hydraulic accumulator comprises of (A) A storage device and a control valve (B) A cylinder and a plunger (C) Two pistons and two cylinders (D) A storage tank and a ram pump

Last Answer : (B) A cylinder and a plunger

How does a tank-blanketing valve operate?

Description : How does a tank-blanketing valve operate?

Last Answer : Tank Blanketing Valves provide an effective means of preventing and controlling fires in flammable liquid storage tanks. Vapors cannot be ignited in the absence of an adequate supply of oxygen. In ... . The blanketing valve reseals when pressure in the tank has returned to an acceptable level.

What sociological perspective would view sports as serving as a safety valve for both participants and spectators allowing them to shed tension and aggressive energy in a socially acceptable way?

Description : What sociological perspective would view sports as serving as a safety valve for both participants and spectators allowing them to shed tension and aggressive energy in a socially acceptable way?

Last Answer : Need answer

The moisture in a refrigerant is removed by (a) evaporator (b) safety relief valve (c) dehumidifier (d) driers

Description : The moisture in a refrigerant is removed by (a) evaporator (b) safety relief valve (c) dehumidifier (d) driers

Last Answer : Ans: d

What is safety valve?

Description : What is safety valve?

Last Answer : Answer: Rapid opening (popping action) full flow valve for air and other gases.

A safety valve usually employed with stationary boilers is (A) Lever safety valve (B) Dead weight safety valve (C) High steam and low water safety valve (D) All of these

Description : A safety valve usually employed with stationary boilers is (A) Lever safety valve (B) Dead weight safety valve (C) High steam and low water safety valve (D) All of these

Last Answer : (D) All of these

How does the dirty safety trip valve trip the safety trip at normal speed?

Description : How does the dirty safety trip valve trip the safety trip at normal speed?

Last Answer : Dirt may find its way to the safety trip valve and get deposited around the spring end cap end. This will block the clearance between the safety trip valve and the spring end cap. As a result the steam pressure in the spring cap gets lowered allowing the valve to close.

A spring of stiffness 100 N/mm used in a spring-loaded safety valve of diameter 20 mm on a boiler with the pressure inside the boiler equal to 1 MPa should be initially compressed by a. 5mm b. 3.14 mm c. 2mm d. 6.28 mm

Description : A spring of stiffness 100 N/mm used in a spring-loaded safety valve of diameter 20 mm on a boiler with the pressure inside the boiler equal to 1 MPa should be initially compressed by a. 5mm b. 3.14 mm c. 2mm d. 6.28 mm

Last Answer : b. 3.14 mm

Wood metal is not used for making (A) Soft solder (B) Casting for dental work (C) Storage tank for storing brine and caustic soda (D) Fusible safety plug for pressure cooke

Description : Wood metal is not used for making (A) Soft solder (B) Casting for dental work (C) Storage tank for storing brine and caustic soda (D) Fusible safety plug for pressure cooke

Last Answer : (C) Storage tank for storing brine and caustic soda

The torque of 50 Nm is applied on the wheel operating a valve. If the wheel is rotated through two revolutions, work done in Newton-metres is given by a.628 b.107 dynes c.314 d.25 e.100

Description : The torque of 50 Nm is applied on the wheel operating a valve. If the wheel is rotated through two revolutions, work done in Newton-metres is given by a.628 b.107 dynes c.314 d.25 e.100

Last Answer : a. 628

Dry saturated steam can be converted into superheated steam by (A) Increasing its cross-sectional area of flow (B) Passing it through a pressure reducing valve (C) Forcing it downwards through a vertical tube (D) None of these

Description : Dry saturated steam can be converted into superheated steam by (A) Increasing its cross-sectional area of flow (B) Passing it through a pressure reducing valve (C) Forcing it downwards through a vertical tube (D) None of these

Last Answer : (B) Passing it through a pressure reducing valve

Explain The Valve Parts?

Description : Explain The Valve Parts?

Last Answer : Gate Valve - Body, Bonnet, Seat, Gate, Stem, Hand Wheel, Gland Bush, Gland Flange, Gland Bolt and Nuts. Hand Wheel lock nut. Ball Valve - Body , End Piece , Ball , Stem , Seal , Seal Follower , ... End cover , Hand Wheel or Gear Box , Gland Bush , Gland Packing , Gland Flange , Gland Stud and nut.

Define Valve?

Description : Define Valve?

Last Answer : Valve is a Mechanical flow control element in the process.

Device to control the pressure of fluid and gases within range of settings. a. Relief valve. c. Filter b. Spray gun. d. Pressure regulator

Description : Device to control the pressure of fluid and gases within range of settings. a. Relief valve. c. Filter b. Spray gun. d. Pressure regulator

Last Answer : Pressure regulator

Component to remove suspended matter large than a predetermined size from fluid. a. Relief valve. c. Filter b. Spray gun. d. Nozzle

Description : Component to remove suspended matter large than a predetermined size from fluid. a. Relief valve. c. Filter b. Spray gun. d. Nozzle

Last Answer : Filter

Creepiness. Microsoft operating systems doesn't have a support center somewhere in India that calls you first, do they? Should I call trace him or just blow it off? Where did he get my number?

Description : Creepiness. Microsoft operating systems doesn't have a support center somewhere in India that calls you first, do they? Should I call trace him or just blow it off? Where did he get my number?

Last Answer : answer:It is a scam to get you to install shit. http://arstechnica.com/tech-policy/2012/10/i-am-calling-you-from-windows-a-tech-support-scammer-dials-ars-technica/

What jelly from W Va would make a good companion for a journey across the oceans to the Far East, so she could blow the doggy door off the 30K mansion?

Description : What jelly from W Va would make a good companion for a journey across the oceans to the Far East, so she could blow the doggy door off the 30K mansion?

Last Answer : Congratulations lady!! A well deserved 30K! You beat me to it, but I’ll always have 20k!

How do you personally blow off your friends in a nice way?

Description : How do you personally blow off your friends in a nice way?

Last Answer : If they’re your friends they’ll understand it as you explained it here.

How can I blow off steam tonight? (It's been another rotten day)

Description : How can I blow off steam tonight? (It's been another rotten day)

Last Answer : You should go to the local bookstore (preferably a large/busy one) and walk up and down the aisles asking random folks (who look like they can take a joke): “Excuse me, I’m sorry to bother you, but do you know where the erotic fiction might be?”

Do you ever start to answer a question and then think: honestly, who really gives a rat's ass what I think? I don't even care what I think anymore, so you just blow it off?

Description : Do you ever start to answer a question and then think: honestly, who really gives a rat's ass what I think? I don't even care what I think anymore, so you just blow it off?

Last Answer : People care when you’re radical [hint: double meaning]. The Wikipedia quoting crap don’t cut it.

The valves provided at low points of pipes to drain off water quickly under gravity, are called (A) Blow off valves (B) Drain valves (C) Sewer valves (D) All the above

Description : The valves provided at low points of pipes to drain off water quickly under gravity, are called (A) Blow off valves (B) Drain valves (C) Sewer valves (D) All the above

Last Answer : (D) All the above

Blow off cock is provided in steam boiler to (A) Guard the boiler in case of abnormal rise in steam pressure (B) Drain out water and sludge during its repair (C) Regulate the supply of water in boiler (D) Put out the fire in the furnace when the water level in the boiler falls to unsafe limit

Description : Blow off cock is provided in steam boiler to (A) Guard the boiler in case of abnormal rise in steam pressure (B) Drain out water and sludge during its repair (C) Regulate the supply of water in boiler (D) Put out the fire in the furnace when the water level in the boiler falls to unsafe limit

Last Answer : (B) Drain out water and sludge during its repair

Minimum horsepower of pump required for filling 50m3 water tank, 20 metres high from ground in 30 minutes by lifting water from a well 5 metres below the ground level is a.5.45 KW b.7.5 KW c.6.81 KW d.Tapered bearing e.66.8 KW

Description : Minimum horsepower of pump required for filling 50m3 water tank, 20 metres high from ground in 30 minutes by lifting water from a well 5 metres below the ground level is a.5.45 KW b.7.5 KW c.6.81 KW d.Tapered bearing e.66.8 KW

Last Answer : c. 6.81 KW

Will My Small Homeowner Air Compressor Be Able To Handle An Extra Tank?

Description : Will My Small Homeowner Air Compressor Be Able To Handle An Extra Tank?

Last Answer : It depends on whether or not you have a continuous duty air compressor or not. A continuous duty compressor means that it is able to run for long periods of time (aka continuously). This type of ... that you give it time to cool off when filling the tank, otherwise you would be going overboard.

What Is A Good Tank Size?

Description : What Is A Good Tank Size?

Last Answer : The tank size you will use will depend on the amount of air that you need stored. A benefit to a larger tanked air compressors is that the motor will not start and stop as often as a smaller tanked ... that you will use a good amount of air, it may be smarter and cheaper to use a smaller tank.

Battery operated sprayer consists of 10 lit capacity tank and rechargeable battery. b. 10 Volt c. 12 Volt. d. None of above Ans- a. 6 Volt

Description : Battery operated sprayer consists of 10 lit capacity tank and rechargeable battery. b. 10 Volt c. 12 Volt. d. None of above Ans- a. 6 Volt

Last Answer : Ans-    a. 6 Volt

Rocker sprayer and Foot or pedal operated sprayer a. have small built tank b. have big built tank d. None of above

Description : Rocker sprayer and Foot or pedal operated sprayer a. have small built tank b. have big built tank d. None of above

Last Answer : Ans- c. does not have in built tank and separate spray tank is necessary.    

Knapsack hand compression sprayer has flat or bean shaped tank designed to fit comfortably on the ............of the operator. a. hand. b. leg. c. back. d. None of above

Description : Knapsack hand compression sprayer has flat or bean shaped tank designed to fit comfortably on the ............of the operator. a. hand. b. leg. c. back. d. None of above

Last Answer : Ans- c. back.

A tank capacity of knapsack sprayer is about: a. 5-10 litres c) 9-22.5 litres b. 8-10 litres d) 10-25.5 litres

Description : A tank capacity of knapsack sprayer is about: a. 5-10 litres c) 9-22.5 litres b. 8-10 litres d) 10-25.5 litres

Last Answer : 9-22.5 litres

Tank capacity of compression sprayer is: A. 10 litres B. 12 litres C. 14 litres D. 20 litres

Description : Tank capacity of compression sprayer is: A. 10 litres B. 12 litres C. 14 litres D. 20 litres

Last Answer : 14 litres

A tank capacity of knapsack sprayer is about: A. 5-10 litres B. 8-10 litres C. 9-22.5 litres D. 10-25.5 litres

Description : A tank capacity of knapsack sprayer is about: A. 5-10 litres B. 8-10 litres C. 9-22.5 litres D. 10-25.5 litres

Last Answer : 10-25.5 litres

Steel Tank in the power sprayer is used to avoid a) Moisturisation b) Corrosion c) Leakages d) Stability

Description : Steel Tank in the power sprayer is used to avoid a) Moisturisation b) Corrosion c) Leakages d) Stability

Last Answer : Corrosion

A Power sprayer essentially consists of: a) Tank a) Agitator b) Pressure Gauge c) All of the above

Description : A Power sprayer essentially consists of: a) Tank a) Agitator b) Pressure Gauge c) All of the above

Last Answer : All of the above

sprayer do not require a separate tank a) Hand compression sprayer b) Knapsack hand compression sprayer c) Rocker sprayer d) Power sprayer

Description : sprayer do not require a separate tank a) Hand compression sprayer b) Knapsack hand compression sprayer c) Rocker sprayer d) Power sprayer

Last Answer : Suppose in a squid game, players wanted to escape the game. If they need to travel 100 km North and 125 km East. What must be their resultant vector?  160.07 m 161.02 m 160.08 km none of the above 161 km

A Gas tank registers1000 kPa. After some gas has been used, the gauge registers 500 kPa. What percent of the gas remains in the tank?  a) 64.40%  b) 74.60%  c) 58.40%  d) 54.60%

Description : A Gas tank registers1000 kPa. After some gas has been used, the gauge registers 500 kPa. What percent of the gas remains in the tank?  a) 64.40%  b) 74.60%  c) 58.40%  d) 54.60% Formula: Pabs = Patm + Pgage & %= P2/P1 * 100%

Last Answer : 54.60%

The pressure gauge on a 2000 m³ tank of oxygen gas reads 600 kPa. How much volumes will the oxygen occupied at pressure of the outside air 100 kPa?  a) 14026.5 m³  b) 15026.5 m³  c) 13026.5 m³  d) 16026.5 m³ Formula: P1V1/T1 =P2V2/T2

Description : The pressure gauge on a 2000 m³ tank of oxygen gas reads 600 kPa. How much volumes will the oxygen occupied at pressure of the outside air 100 kPa?  a) 14026.5 m³  b) 15026.5 m³  c) 13026.5 m³  d) 16026.5 m³ Formula: P1V1/T1 =P2V2/T2

Last Answer : 14026.5 m³

A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added.  a) 1378.7 kJ  b) 1348.5 kJ  c) 1278,7 kJ  d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)

Description : A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added.  a) 1378.7 kJ  b) 1348.5 kJ  c) 1278,7 kJ  d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)

Last Answer : 1378.7 kJ

A vacuum is connected to a tank reads 3kpa at a location w/ the barametric pressure reading is 75mmhg. Determined the P absolute in the tank  a. 70.658 kpa  b. 68 kpa  c. 58.78 kap  d. None of the above Pabs = Patm – Pvacuum

Description : A vacuum is connected to a tank reads 3kpa at a location w/ the barametric pressure reading is 75mmhg. Determined the P absolute in the tank  a. 70.658 kpa  b. 68 kpa  c. 58.78 kap  d. None of the above Pabs = Patm – Pvacuum

Last Answer : 70.658 kpa

While Doing Welding What Are The Safety Measures That Worker Should Follow?

Description : While Doing Welding What Are The Safety Measures That Worker Should Follow?

Last Answer : While doing welding, workers should follow the rules like: Respirator or welders mask: Use mask or respirators as per your projects, match the filter to the types of metals and coatings used ... be a cover with protective and clothes which can bear heat and spark emitted from the welding.