In a colar beam roof (A) There is no horizontal tie beam (B) There is a horizontal tie at the feet of rafters only (C) There is a horizontal tie at almost the middle of rafters only (D) There are two horizontal ties, one at the feet and other at the middle of the rafters

In a colar beam roof
(A) There is no horizontal tie beam
(B) There is a horizontal tie at the feet of rafters only
(C) There is a horizontal tie at almost the middle of rafters only
(D) There are two horizontal ties, one at the feet and other at the middle of the rafters
by

1 Answer

Answer :

Answer: Option C
by

Related questions

The members which support covering material of a sloping roof, are (A) Rafters (B) Purlins (C) Battens (D) Struts

Description : The members which support covering material of a sloping roof, are (A) Rafters (B) Purlins (C) Battens (D) Struts

Last Answer : Answer: Option A

The function of king post in a king post roof truss is (A) To support the frame work of the roof (B) To receive the ends of principal rafter (C) To prevent the walls from spreading outward (D) To prevent the tie beam from sagging at its centre

Description : The function of king post in a king post roof truss is (A) To support the frame work of the roof (B) To receive the ends of principal rafter (C) To prevent the walls from spreading outward (D) To prevent the tie beam from sagging at its centre

Last Answer : Answer: Option D

hat is the horizontal spacing between tie? a. No more than 5m (16 feet) b. No more than 9m (30 feet) c. No more than 7m (23 feet) d. No more than 38m (125 feet)

Description : hat is the horizontal spacing between tie? a. No more than 5m (16 feet) b. No more than 9m (30 feet) c. No more than 7m (23 feet) d. No more than 38m (125 feet)

Last Answer : b. No more than 9m (30 feet)

Who hockey team wins 6 game loses 4 games and ties one game what fraction of the games did they win lose tie?

Description : Who hockey team wins 6 game loses 4 games and ties one game what fraction of the games did they win lose tie?

Last Answer : Win = 6/11, lose = 4/11, tie = 1/11.

Who hockey team wins 6 game loses 4 games and ties one game what fraction of the games did they win lose tie?

Description : Who hockey team wins 6 game loses 4 games and ties one game what fraction of the games did they win lose tie?

Last Answer : Win = 6/11, lose = 4/11, tie = 1/11.

In a square beam loaded longitudinally, shear develops (A) On middle fibre along horizontal plane (B) On lower fibre along horizontal plane (C) On top fibre along vertical plane (D) Equally on each fibre along horizontal plane

Description : In a square beam loaded longitudinally, shear develops (A) On middle fibre along horizontal plane (B) On lower fibre along horizontal plane (C) On top fibre along vertical plane (D) Equally on each fibre along horizontal plane

Last Answer : (D) Equally on each fibre along horizontal plane (D) Equally on each fibre along horizontal plane

When a rectangular beam is loaded longitudinally, shear develops on (A) Bottom fibre (B) Top fibre (C) Middle fibre (D) Every-horizontal plane

Description : When a rectangular beam is loaded longitudinally, shear develops on (A) Bottom fibre (B) Top fibre (C) Middle fibre (D) Every-horizontal plane

Last Answer : (D) Every-horizontal plane

The type of joint commonly used at the junction of a principal rafter and tie beam in timber trusses is (A) Mortise and tenon joint (B) Oblique mortise and tenon joint (C) Butt joint (D) Mitred joint

Description : The type of joint commonly used at the junction of a principal rafter and tie beam in timber trusses is (A) Mortise and tenon joint (B) Oblique mortise and tenon joint (C) Butt joint (D) Mitred joint

Last Answer : Answer: Option B

The vertical spacing between ties must be no more than? a. 8m (26 feet) b. 10m (33 feet) c. 12m (39 feet) d. 6m (20 feet)

Description : The vertical spacing between ties must be no more than? a. 8m (26 feet) b. 10m (33 feet) c. 12m (39 feet) d. 6m (20 feet)

Last Answer : a. 8m (26 feet)

When should you start putting a colar on puppies?

Description : My dog had puppies a few weeks ago. How old should the puppies be when they get their colars?

Last Answer : whatever age really. We stated to use ours when she was weaned.

If you were drawing a map of your state what colar shading might you use?

Description : If you were drawing a map of your state what colar shading might you use?

Last Answer : red green

The knuckle joint is used two joint between the tie bars in roof trusses. A. True B. False

Description : The knuckle joint is used two joint between the tie bars in roof trusses. A. True B. False

Last Answer : A. True

The horizontal timber piece provided at the apex of a roof truss which supports the common rafter is called (A) Ridge board (B) Hip rafter (C) Eaves board (D) Valley rafte

Description : The horizontal timber piece provided at the apex of a roof truss which supports the common rafter is called (A) Ridge board (B) Hip rafter (C) Eaves board (D) Valley rafte

Last Answer : Answer: Option A

The maximum permissible deflection of a timber beam supporting a roof, is (A) L/100 (B) L/150 (C) L/260 (D) L/360

Description : The maximum permissible deflection of a timber beam supporting a roof, is (A) L/100 (B) L/150 (C) L/260 (D) L/360

Last Answer : Answer: Option D

For a beam having fixed ends, the unknown element of the reactions, is (A) Horizontal components at either end (B) Vertical components at either end (C) Horizontal component at one end and vertical component at the other (D) Horizontal and vertical components at both the ends

Description : For a beam having fixed ends, the unknown element of the reactions, is  (A) Horizontal components at either end  (B) Vertical components at either end  (C) Horizontal component at one end and vertical component at the other  (D) Horizontal and vertical components at both the ends 

Last Answer : (D) Horizontal and vertical components at both the ends 

While compared with singly reinforced beams, the depth of doubly reinforced beam is [ A ] Greater [ B ] Lesser [ C ] almost equal [ D ] twice

Description : While compared with singly reinforced beams, the depth of doubly reinforced beam is [ A ] Greater [ B ] Lesser [ C ] almost equal [ D ] twice

Last Answer : [ B ] Lesser

How to connect a RCC tie beam with existing RCC foundation/ RCC column

Description : How to connect a RCC tie beam with existing RCC foundation/ RCC column

Last Answer : Need Answer

The horizontal deflection of a parabolic curved beam of span 10 m and rise 3 m when loaded with a uniformly distributed load l t per horizontal length is (where Ic is the M.I. at the crown, which varies as the slope of the arch). (A) 50/EIc (B) 100/EIc (C) 150/EIc (D) 200/E

Description : The horizontal deflection of a parabolic curved beam of span 10 m and rise 3 m when loaded with  a uniformly distributed load l t per horizontal length is (where Ic  is the M.I. at the crown, which  varies as the slope ... arch).  (A) 50/EIc (B) 100/EIc (C) 150/EIc (D) 200/E

Last Answer : (D) 200/E

An R.C.C. beam not provided with shear reinforcement may develop cracks in its bottom inclined roughly to the horizontal at (A) 25° (B) 35° (C) 45° (D) 55°

Description : An R.C.C. beam not provided with shear reinforcement may develop cracks in its bottom inclined roughly to the horizontal at (A) 25° (B) 35° (C) 45° (D) 55°

Last Answer : Answer: Option C

Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to (A) Shear force (B) Area of the section (C) Distance of the C.G. of the area from its neutral axis (D) Moment of the beam section about its neutral axis

Description : Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to (A) Shear force (B) Area of the section ... . of the area from its neutral axis (D) Moment of the beam section about its neutral axis

Last Answer : Answer: Option D

Ties are load carrying members of a frame, which are subjected to (A) Transverse loads (B) Axial tension loads (C) Axial compressive loads (D) Torsional loads

Description : Ties are load carrying members of a frame, which are subjected to  (A) Transverse loads  (B) Axial tension loads  (C) Axial compressive loads  (D) Torsional loads 

Last Answer : (B) Axial tension loads 

If the diameter of longitudinal bars of a square column is 16 mm, the diameter of lateral ties should not be less than (A) 4 mm (B) 5 mm (C) 6 mm (D) 8 mm

Description : If the diameter of longitudinal bars of a square column is 16 mm, the diameter of lateral ties should not be less than (A) 4 mm (B) 5 mm (C) 6 mm (D) 8 mm

Last Answer : Answer: Option B

The minimum cover to the ties or spirals should not be less than (A) 15 mm (B) 20 mm (C) 25 mm (D) 50 mm

Description : The minimum cover to the ties or spirals should not be less than (A) 15 mm (B) 20 mm (C) 25 mm (D) 50 mm

Last Answer : Answer: Option C

The diameter of ties in a column should be (A) More than or equal to one fourth of diameter of main bar (B) More than or equal to 5 mm (C) More than 5 mm but less than one-fourth of diameter of main bar (D) More than 5 mm and also more than one-fourth of diameter of main bar

Description : The diameter of ties in a column should be (A) More than or equal to one fourth of diameter of main bar (B) More than or equal to 5 mm (C) More than 5 mm but less than one-fourth of diameter of main bar (D) More than 5 mm and also more than one-fourth of diameter of main bar

Last Answer : Answer: Option D

The purpose of lateral ties in short R.C. columns is to (a) Increase the load carrying capacity of column (b) Facilitate compaction of concrete (c) Facilitate construction (d) Avoid buckling of longitudinal bars

Description : The purpose of lateral ties in short R.C. columns is to (a) Increase the load carrying capacity of column (b) Facilitate compaction of concrete (c) Facilitate construction (d) Avoid buckling of longitudinal bars

Last Answer : (d) Avoid buckling of longitudinal bars

The load carrying capacity of helically reinforced column as compared to that of column with ties is about [ A ] 5% less [ B ] 5% more [ C ] 10% less [ D ] 10% more`

Description : The load carrying capacity of helically reinforced column as compared to that of column with ties is about [ A ] 5% less [ B ] 5% more [ C ] 10% less [ D ] 10% more`

Last Answer : [ B ] 5% more

The purpose of lateral ties in short reinforced concrete columns is to [ A ] Facilitate construction [ B ] Facilitate compaction of concrete [ C ] Increase the load carrying capacity of the columns [ D ] Avoid buckling of longitudinal bars

Description : The purpose of lateral ties in short reinforced concrete columns is to [ A ] Facilitate construction [ B ] Facilitate compaction of concrete [ C ] Increase the load carrying capacity of the columns [ D ] Avoid buckling of longitudinal bars

Last Answer : [ D ] Avoid buckling of longitudinal bars

A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span (A) 2.5 cm (B) 3.0 cm (C) 4.0 cm (D) 5.0 cm

Description : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20  meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span  (A) 2.5 cm  (B) 3.0 cm  (C) 4.0 cm  (D) 5.0 cm 

Last Answer : (C) 4.0 cm

In a simply supported beam (l + 2a) with equal overhangs (a) and carrying a uniformly distributed load over its entire length, B.M. at the middle point of the beam will be zero if (A) l = 2a (B) l = 4a (C) l < 2a (D) l > a

Description : In a simply supported beam (l + 2a) with equal overhangs (a) and carrying a uniformly distributed load over its entire length, B.M. at the middle point of the beam will be zero if (A) l = 2a (B) l = 4a (C) l < 2a (D) l > a

Last Answer : (A) l = 2a

Pick up the correct statement from the following: (A) Construction joints in columns are provided a few cm below the junction of beam (B) Construction joints in columns are provided at the bottom hunching (C) Construction joints in beams and slabs are provided within middle third (D) All the above

Description : Pick up the correct statement from the following: (A) Construction joints in columns are provided a few cm below the junction of beam (B) Construction joints in columns are provided at the bottom ... (C) Construction joints in beams and slabs are provided within middle third (D) All the above

Last Answer : Answer: Option D

Two women play five games of checkers. Each woman wins the same number of games. There are no ties. Explain this. Because they aren't wearing ties! The women are not playing each other. These two women are playing men. Women don't wear ties.

Description : Two women play five games of checkers. Each woman wins the same number of games. There are no ties. Explain this. Because they aren't wearing ties! The women are not playing each other. These two women are playing men. Women don't wear ties.

Last Answer : Women don't wear ties.

A beam is a structural member which is subjected to (a) Axial tension or compression (b) Transverse loads and couples (c) Twisting moment (d) No load, but its axis should be horizontal and x-section rectangular or circular

Description : A beam is a structural member which is subjected to (a) Axial tension or compression (b) Transverse loads and couples (c) Twisting moment (d) No load, but its axis should be horizontal and x-section rectangular or circular

Last Answer : b) Transverse loads and couples

what- The ratio of the base to the height of a roof is 26:5. The base is 42 feet longer than the height.What are the base and height of the roof?

Description : what- The ratio of the base to the height of a roof is 26:5. The base is 42 feet longer than the height.What are the base and height of the roof?

Last Answer : base: 52 ft

The Speaker of the lok Sabha enjoys – (1) no right to vote in general circumstances (2) the right to vote only in case of a tie (3) the right to vote like other members of the House (4) the right to vote only once during the term of the House

Description : The Speaker of the lok Sabha enjoys – (1) no right to vote in general circumstances (2) the right to vote only in case of a tie (3) the right to vote like other members of the House (4) the right to vote only once during the term of the House

Last Answer : (2) the right to vote only in case of a tie Explanation: Normally, the Speaker does not take part in voting in the House. But in case of a tie, he exercises his right of casting vote. His casting vote ... for the removal of the Speaker is put to vote in the House, he has the right to cast his vote.

For which one of the following reaction, the graph of `DeltaG` against T is almost horizontal to temperature axis

Description : For which one of the following reaction, the graph of `DeltaG` against T is almost horizontal to temperature axis

Last Answer : For which one of the following reaction, the graph of `DeltaG` against T is almost horizontal to temperature axis A. ... ((s))+O_(2(g)) to 2MgO(g)`

A satellite beam that covers almost 42.4% of the earths surface. A. Zone beam B. Hemispheric beam C. Spot beam D. Global beam

Description : A satellite beam that covers almost 42.4% of the earths surface. A. Zone beam B. Hemispheric beam C. Spot beam D. Global beam

Last Answer : D. Global beam

A satellite beam that covers almost 42.4% of earths surface. A. Spot beam B. Global beam C. Zone beam D. Hemispheric beam

Description : A satellite beam that covers almost 42.4% of earths surface. A. Spot beam B. Global beam C. Zone beam D. Hemispheric beam

Last Answer : B. Global beam

The ancient civilisations of Mesopotamia and Harappa had cultural ties with each other because of __________ 

Description : The ancient civilisations of Mesopotamia and Harappa had cultural ties with each other because of __________ 

Last Answer : Choose the correct reason and complete the sentence: The ancient civilisations of Mesopotamia and ... were found (d) impressive town planning

For any part of a beam between two concentrated load, Bending moment diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Description : For any part of a beam between two concentrated load, Bending moment diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : (c) Line inclined to x-axis

7-For any part of the beam, between two concentrated load Shear force diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Description : 7-For any part of the beam, between two concentrated load Shear force diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : Na

A beam fixed at both ends with a central load W in the middle will have zero bending moment at a.one place b.two places c.no where d.three places e.107 dynes

Description : A beam fixed at both ends with a central load W in the middle will have zero bending moment at a.one place b.two places c.no where d.three places e.107 dynes

Last Answer : b. two places

A beam is called fixed beam if end slopes remain a. horizontal b.vertical c.inclined d.parabolic

Description : A beam is called fixed beam if end slopes remain a. horizontal b.vertical c.inclined d.parabolic

Last Answer : a. horizontal

For any part of a beam subjected to uniformly distributed load, bending moment diagram is (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Description : For any part of a beam subjected to uniformly distributed load, bending moment diagram is (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : d) Parabola

For any part of a beam subjected to uniformly distributed load, Shear force diagram is (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Description : For any part of a beam subjected to uniformly distributed load, Shear force diagram is (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : (c) Line inclined to x-axis

A house has four walls a ceiling and a beam going across the middle. The front door is locked from the inside and there are no windows. There is a man hanging from a rope tied to the beam and there is a puddle of water under him on the floor. How did the man hang himself? -Riddles

Description : A house has four walls a ceiling and a beam going across the middle. The front door is locked from the inside and there are no windows. There is a man hanging from a rope tied to the beam and there is a puddle of water under him on the floor. How did the man hang himself? -Riddles

Last Answer : The puddle of water under him was a ice cube that he stepped on and waited for it to melt

In chain surveying tie lines are primarily provided (A) To check the accuracy of the survey (B) To take offsets for detail survey(C) To avoid long offsets from chain lines (D) To increase the number of chain lines

Description : In chain surveying tie lines are primarily provided  (A) To check the accuracy of the survey  (B) To take offsets for detail survey  (C) To avoid long offsets from chain lines  (D) To increase the number of chain lines 

Last Answer : (C) To avoid long offsets from chain lines 

The additional lines which are measured to show the correctness of the chain surveying are called: (A) Check clines (B) Proof lines (C) Tie lines (D) All of these

Description : The additional lines which are measured to show the correctness of the chain surveying are called: (A) Check clines (B) Proof lines (C) Tie lines (D) All of these

Last Answer : (D) All of these

A long vertical member, subjected to an axial compressive load, is called (A) A column (B) A strut (C) A tie (D) A stanchion

Description : A long vertical member, subjected to an axial compressive load, is called (A) A column (B) A strut (C) A tie (D) A stanchion

Last Answer : (A) A column

If At is the area of steel cross-section, t is working stress, L is width of road and W is weight of slab per square metre, the spacing of the tie bars for a longitudinal joint, is (A) (100 At × t)/WL (B) 100 At/tWL (C) (100 WAt × t)/tL (D) 100 WL/At t

Description : If At is the area of steel cross-section, t is working stress, L is width of road and W is weight of slab per square metre, the spacing of the tie bars for a longitudinal joint, is (A) (100 At × t)/WL (B) 100 At/tWL (C) (100 WAt × t)/tL (D) 100 WL/At t

Last Answer : Answer: Option D