The additional lines which are measured to show the correctness of the chain surveying are called:
(A) Check clines
(B) Proof lines
(C) Tie lines
(D) All of these

1 Answer

Answer :

(D) All of these

Related questions

Description : In chain surveying tie lines are primarily provided  (A) To check the accuracy of the survey  (B) To take offsets for detail survey  (C) To avoid long offsets from chain lines  (D) To increase the number of chain lines 

Last Answer : (C) To avoid long offsets from chain lines 

Description : Check lines (or proof lines) in Chain Surveying, are essentially required (A) To plot the chain lines (B) To plot the offsets (C) To indicate the accuracy of the survey work (D) To increase the out-turn

Last Answer : (C) To indicate the accuracy of the survey work

Description : The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Last Answer : (A) Chain surveying

Description : The accuracy of measurement in chain surveying, does not depend upon (A) Length of the offset (B) Scale of the plotting (C) Importance of the features (D) General layout of the chain lines

Last Answer : (D) General layout of the chain lines

Description : Pick up the method of surveying in which field observations and plotting proceed simultaneously from the following (A) Chain surveying (B) Compass surveying (C) Plan table surveying (D) Tacheometric surveying

Last Answer : (C) Plan table surveying

Description : In chain surveying, perpendiculars to the chain line are set out by (A) A theodolite (B) A prismatic compass (C) A level (D) An optical square

Last Answer : (D) An optical square

Description : The method generally preferred to for contouring an undulating area, is (A) Chain surveying (B) Plane table surveying (C) Tacheometrical surveying (D) Compass surveying

Last Answer : (C) Tacheometrical surveying

Description : Prolongation of chain line across an obstruction in chain surveying, is done by (A) Making angular measurements (B) Drawing perpendiculars with a chain (C) Solution of triangles (D) All the above

Last Answer : (B) Drawing perpendiculars with a chain

Description : In chain surveying field work is limited to (A) Linear measurements only (B) Angular measurements only (C) Both linear and angular measurements (D) All the above

Last Answer : (A) Linear measurements only

Description : Chain surveying is well adopted for (A) Small areas in open ground (B) Small areas with crowded details (C) Large areas with simple details (D) Large areas with difficult details

Last Answer : (A) Small areas in open ground

Description : Explain the use of dimensional analysis to check the correctness of a physical equation.

Last Answer : Explain the use of dimensional analysis to check the correctness of a physical equation.

Description : Explain principle of chain surveying 

Last Answer : 1) Principle of chain surveying is triangulation 2) Triangulation consists of frame work of triangles. The whole area is divided into network of triangles. 3) A triangle is the only simple plane ... to be adopted depends upon the shape & configuration of the ground & the natural obstacles. 

Description : State any four precautions to be taken while selecting stations for chain surveying.

Last Answer : Following are the precautions to be taken while selecting station for chain surveying. 1) As far as possible the survey work should be based upon the basic principle of surveying i.e. working from whole to ... level ground. 9) The survey lines should run as far as possible nearer to object.

Description : Is this additional proof we are being played by Trump?

Last Answer : The people sitting on the opposite side of the table?

Description : The tie rod connects the front wheel spindle arms and is actuated by the steering shaft through a) chain link b) gear link c) tension link d) drag link

Last Answer : d) drag link

Description : If the area calculated form the plan plotted with measurements by an erroneous chain, accurate  area of the plan is  (A) Measured area (Length of chain used/Nominal chain length)  (B) Measured ... of chain used)²  (D) Measured area (Length of chain used/Nominal chain length)² 

Last Answer : (D) Measured area × (Length of chain used/Nominal chain length)² 

Description : Short offsets are measured with (A) An ordinary chain (B) An invar tape (C) A metallic tape (D) A steel tape

Last Answer : (A) An ordinary chain

Description : How to Check Tie Rod Ends

Last Answer : How to Check Tie Rod Ends If you often do car checkups, then you must be familiar with the tie rod ends. Part of a steering rack's extension, they connect to the front wheels' knuckles. It's ... rod ends of a car. Making sure they're working properly will assure you of safe driving all the time.

Description : Diaphragm of a surveying telescope is held inside  (A) Eye-piece  (B) Objective  (C) Telescope tube at its mid point  (D) Telescope at the end nearer the eye-piece

Last Answer : (D) Telescope at the end nearer the eye-piece

Description : An internal focussing type surveying telescope, may be focussed by the movement of  (A) Objective glass of the telescope  (B) Convex-lens in the telescope  (C) Concave lens in the telescope  (D) Plano-convex lens in the telescope

Last Answer : (C) Concave lens in the telescope 

Description : Geodetic surveying is undertaken  (A) For production of accurate maps of wide areas  (B) For developing the science of geodesy  (C) Making use of most accurate instruments and methods of observation  (D) All the above 

Last Answer : (D) All the above 

Description : Cross hairs in surveying telescopes, are fitted (A) In the objective glass (B) At the centre of the telescope (C) At the optical centre of the eye piece (D) In front of the eye piece

Last Answer : (D) In front of the eye piece

Description : The main principle of surveying is to work (A) From part to the whole (B) From whole to the part (C) From higher level to the lower level (D) From lower level to higher level

Last Answer : (B) From whole to the part

Description : While surveying a plot of land by plane tabling, the field observations (A) And plotting proceed simultaneously (B) And plotting do not proceed simultaneously (C) And recorded in field books to be plotted later (D) All the above

Last Answer : (A) And plotting proceed simultaneously

Description : The type of surveying which requires least office work is (A) Tachometry (B) Trigonometrical levelling (C) Plane table surveying (D) Theodolite surveying

Last Answer : (C) Plane table surveying

Description : The branch of surveying in which both horizontal and vertical positions of a point, are determined by making instrumental observations, is known (A) Tacheometry (B) Tachemetry (C) Telemetry (D) All the above

Last Answer : (D) All the above

Description : Which of the following methods of plane table surveying is used to locate the position of an inaccessible point? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Last Answer : (B) Intersection

Description : In a solution of the three-point problem in plane table surveying, the converging of error is attained through : (a) Concyclic concept (b) Bessel’s method (c) Triangle of error (d) Tracing paper method

Last Answer : (c) Triangle of error

Description : Working from the whole to the part is followed as the fundamental principle of surveying so as to : 1. Distribute errors 2. Improve ease of working 3. Prevent accumulation of errors 4. Compensate error in a way 5. Refer to common datum ... (a) 1, 2 and 4 (b) 1, 3 and 5 (c) 3 and 4 (d) 2 and 5

Last Answer : (c) 3 and 4

Description : Stress strain curve of high tensile steel (A) Has a definite yield point (B) Does not show definite yield point but yield point is defined by 0.1% proof stress (C) Does not show definite yield ... proof stress (D) Does not show definite yield point but yield point is defined by 2% proof stress,

Last Answer : Answer: Option C

Description : what are the additional two elements and nucleon numbers in the decay chain if there were two more alpha decay steps after lead-206.?

Last Answer : need help asap!

Description : The reading of the script to check the errors is called: a) Composing b) Proof-reading c) Editing d) None of these

Last Answer : b) Proof-reading

Description : The reading of the script to check the errors is called: A. Composing B. Proof-reading C. Editing D. None of these

Last Answer : B. Proof-reading

Description : The reading of the script to check the errors is called: A. Composing B. Editing C. Proof-reading D. None of these

Last Answer : C. Proof-reading

Description : Data switching systems. A. improve the efficiency of data transfer B. are limited to small data networks C. required additional lines D. are not used in data system

Last Answer : A. improve the efficiency of data transfer

Description : Anderson Distribution Company management has purchased fifteen fork-lifts in three orders over the past two years. As it plans to place its next order for another five machines, management wonders if ... a ________ purchase. A)new-task B)modified rebuy C)straight rebuy D)repetitive purchase

Last Answer : B)modified rebuy

Description : Can you give an example of political correctness or trigger warnings that in your opinion go too far?

Last Answer : Latin Americans getting “offended” with use of the word America when referring to the US. There was also some video about air conditioning being sexist for some reason and that it should be banned. “Manspreading”.

Description : Does political correctness have a tendency to become thought policing?

Last Answer : I find that I am too prudent and I tend to play it safe .

Description : Is there a difference between political correctness and class?

Last Answer : I don’t really equate political correctness with class, but with kindness. Going out of your way to avoid needlessly hurting people is a nice thing to do. While Trump’s insults are crude, they are also cruel…he goes out of his way to hurt people on purpose.

Description : Are people threatened by questions that challenge their logic, morality, or political correctness, etc.?

Last Answer : How is choosing an easy death over horrendous deaths challenging my logic? The logical answer is to choose the easiest less terrifying death. Not a threatening question in my opinion.

Description : Hey guys, sorry to bother you today, but where is the line between political correctness being a barrier, and someone just wanting to say stupid stuff?

Last Answer : It acts as a barrier to people getting to be openly bigoted without being called out on it.

Description : How has the 'p.c. movement' (political correctness) changed value systems in the U.S. in the last 25 years?

Last Answer : Any change that helps introduce compassion into the world is a good thing.

Description : What are you defining as "political correctness"?

Last Answer : answer:I tend to use it to describe instances in which colorful language and euphemisms are used to obscure something. Alternatively, I also use it simply to mean the use of language ... to respectfully representing or referring to people or groups, particularly in terms of oppressed peoples.

Description : Word association and political correctness - let's see how you do.

Last Answer : 1. Caring 2. Hero 3. Safety 4. Flight Attendant 5. Cook

Description : Is there a limit to political correctness in the performing arts?

Last Answer : Comedians routinely cross social boundaries that seem dangerous or at least very risky for other's. Being African American entitles Chris Rock to use the N word in ways that would not be ... of extreme vocabulary has long been used to shock audiences or to make points about social conventions.

Description : Is this Political Correctness gone absolutely crazy?

Last Answer : Please provide a reliable source.

Description : What's your take on "political correctness?"?

Last Answer : stuff that pc rubbish

Description : Political correctness aside:what are your thoughts on "Stay at home Dads"?

Last Answer : Wouldn’t work for me, but I can see where it works for some. It will be the case in my sister’s house soon enough- there, it’s the perfect scenario.

Description : What do you consider to be an example of political correctness gone mad?

Last Answer : I agree with your example, especially the term holiday tree . It's not a holiday tree. It's a Christmas tree. It's for Christmas and nothing else. Also, it's rare, but I've heard person of ... fat to overweight, but I have no problem with overweight just because of the connotations of fat ).

Description : How effective is "political correctness"?

Last Answer : I think the terms black and white are still political correct. I lived in a black community for seven years and my black neighbors and I always differentiate us by the terms black and white. The ... news media and people who really aren't in tune with black or other communities that aren't white.