The main factor which affects the infiltration capacity, is (A) Thickness of saturated layer (B) Depth of surface detention (C) Soil moisture (D) All the above

The main factor which affects the infiltration capacity, is
(A) Thickness of saturated layer
(B) Depth of surface detention
(C) Soil moisture
(D) All the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

The infiltration capacity during rain storm, is considerably reduced due to (A) Surface detention (B) Soil moisture (C) Compaction due to rain (D) All the above

Description : The infiltration capacity during rain storm, is considerably reduced due to (A) Surface detention (B) Soil moisture (C) Compaction due to rain (D) All the above

Last Answer : Answer: Option D

Capacity of soil to absorb moisture, is generally known as (A) Permeability (B) Porosity (C) Infiltration capacity (D) Perviousness

Description : Capacity of soil to absorb moisture, is generally known as (A) Permeability (B) Porosity (C) Infiltration capacity (D) Perviousness

Last Answer : (C) Infiltration capacity

From which of the following factor has not influence the drainage density: (A) Climate (B) Topography (C) Soil infiltration capacity (D) Anthropogenic activity (E) Vegetation (F) Geology

Description : From which of the following factor has not influence the drainage density: (A) Climate (B) Topography (C) Soil infiltration capacity (D) Anthropogenic activity (E) Vegetation (F) Geology

Last Answer : (D) Anthropogenic activity 

Pick up the correct statement from the following: (A) When rainfall rate exceeds the infiltration capacity, the water enters the soil at full capacity rate (B) When rainfall rate is less than the infiltration capacity, the infiltration rate is approximately equal to the rainfall rate (C) The actual infiltration rate at any time may be equal to or less than the infiltration capacity (D) All the above

Description : Pick up the correct statement from the following: (A) When rainfall rate exceeds the infiltration capacity, the water enters the soil at full capacity rate (B) When rainfall rate is less than the ... rate at any time may be equal to or less than the infiltration capacity (D) All the above

Last Answer : Answer: Option D

Infiltration capacity of soil depends upon (A) Number of voids present in the soil (B) Shape and size of soil particles (C) Arrangement of soil particles (D) All the above

Description : Infiltration capacity of soil depends upon (A) Number of voids present in the soil (B) Shape and size of soil particles (C) Arrangement of soil particles (D) All the above

Last Answer : Answer: Option D

To prevent movement of moisture from sub-grade to road pavement at the same level as that of water-table, thickness of a cut off layer of coarse sand, is (A) 15 cm (B) 20 cm (C) 30 cm (D) 45 cm

Description : To prevent movement of moisture from sub-grade to road pavement at the same level as that of water-table, thickness of a cut off layer of coarse sand, is (A) 15 cm (B) 20 cm (C) 30 cm (D) 45 cm

Last Answer : Answer: Option A

To prevent movement of moisture from sub-grade to road pavement on embankments about 0.6 m to 1 m higher than water table, the thickness of cut off layer of coarse sand used, is (A) 15 cm (B) 20 cm (C) 30 cm (D) None of these

Description : To prevent movement of moisture from sub-grade to road pavement on embankments about 0.6 m to 1 m higher than water table, the thickness of cut off layer of coarse sand used, is (A) 15 cm (B) 20 cm (C) 30 cm (D) None of these

Last Answer : Answer: Option D

Time factor for a clay layer is (A) A dimensional parameter (B) Directly proportional to permeability of soil (C) Inversely proportional to drainage path (D) Independent of thickness of clay layer

Description : Time factor for a clay layer is (A) A dimensional parameter (B) Directly proportional to permeability of soil (C) Inversely proportional to drainage path (D) Independent of thickness of clay layer

Last Answer : (B) Directly proportional to permeability of soil

The most determinant factor of soil which affects the plant growth is a. pH b. Soil composition c. Soil Texture d. Soil moisture

Description : The most determinant factor of soil which affects the plant growth is a. pH b. Soil composition c. Soil Texture d. Soil moisture

Last Answer : a. pH

The factor which affects the compaction, is (A) Moisture content (B) Compacting content (C) Method of compaction (D) All the above

Description : The factor which affects the compaction, is (A) Moisture content (B) Compacting content (C) Method of compaction (D) All the above

Last Answer : (D) All the above

A partially saturated sample of soil has a unit weight of 2.0 g/cm3 and specific gravity of soil particles is 2.6. If the moisture content in the soil is 20%, the degree of saturation is (A) 20 % (B) 77 % (C) 92 % (D) None of these

Description : A partially saturated sample of soil has a unit weight of 2.0 g/cm3 and specific gravity of soil particles is 2.6. If the moisture content in the soil is 20%, the degree of saturation is (A) 20 % (B) 77 % (C) 92 % (D) None of these

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) Bulking of sand is caused due to formation of a thin film of surface moisture (B) Fine sand bulks more than coarse sand (C) The volume of fully saturated sand, is equal to the volume of dry and loose sand (D) All the above

Description : Pick up the correct statement from the following: (A) Bulking of sand is caused due to formation of a thin film of surface moisture (B) Fine sand bulks more than coarse sand (C) The volume of fully saturated sand, is equal to the volume of dry and loose sand (D) All the above

Last Answer : Answer: Option D

The aggregate containing moisture in pores and having its surface dry, is known as (A) Moist aggregates (B) Very dry aggregates (C) Dry aggregates (D) Saturated surface dry aggregate

Description : The aggregate containing moisture in pores and having its surface dry, is known as (A) Moist aggregates (B) Very dry aggregates (C) Dry aggregates (D) Saturated surface dry aggregate

Last Answer : Answer: Option D

An aggregate which may contain some moisture in the pores but having dry surface is known as. (a) Dry aggregate (b) Moist aggregate (c) Saturated surface dry aggregate (d) All the above

Description : An aggregate which may contain some moisture in the pores but having dry surface is known as. (a) Dry aggregate (b) Moist aggregate (c) Saturated surface dry aggregate (d) All the above

Last Answer : (a) Dry aggregate

The thickness of the layer of insulation on the conductor, in cables, depends upon (a) Reactive power (b) Power factor (c) Voltage (d) Current carrying capacity

Description : The thickness of the layer of insulation on the conductor, in cables, depends upon (a) Reactive power (b) Power factor (c) Voltage (d) Current carrying capacity

Last Answer : (c) Voltage

The efficiency of sedimentation tank does not depend upon (A) Depth of tank (B) Length of tank (C) Detention period (D) Velocity of water

Description : The efficiency of sedimentation tank does not depend upon  (A) Depth of tank  (B) Length of tank  (C) Detention period  (D) Velocity of water

Last Answer : (D) Velocity of water

Which of the following variables affects the furnace capacity? (A) Temperature of flue gas (B) Thermal conductivity of stock (C) Thickness of heating stock(D) All (A), (B) and (C)

Description : Which of the following variables affects the furnace capacity? (A) Temperature of flue gas (B) Thermal conductivity of stock (C) Thickness of heating stock (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

An intense rain is falling at a uniform rate of 7.5 cm/hour for a period of 60 minutes on a basin whose area is 500 hectares. If the average infiltration capacity during the entire rain period is assumed to be 1.5 cm/hr, the maximum run-off rate based on 10 minute peak percentage of 16% from distributing graph of the basin, is (A) 40 cumecs (B) 60 cumecs (C) 80 cumecs (D) 100 cumecs

Description : An intense rain is falling at a uniform rate of 7.5 cm/hour for a period of 60 minutes on a basin whose area is 500 hectares. If the average infiltration capacity during the entire rain period is assumed to be 1.5 ... of the basin, is (A) 40 cumecs (B) 60 cumecs (C) 80 cumecs (D) 100 cumecs

Last Answer : Answer: Option C

If the slope of a line for infiltration capacity curve is 1/1.737, the value of constant k in Horton's equation of infiltration capacity curve, is (A) 2.0 (B) 2.5 (C) 4.0 (D) 5.0

Description : If the slope of a line for infiltration capacity curve is 1/1.737, the value of constant k in Horton's equation of infiltration capacity curve, is (A) 2.0 (B) 2.5 (C) 4.0 (D) 5.0

Last Answer : Answer: Option C

According to Robert E. Horton, the equation of infiltration capacity curve, is (where letters carry their usual meanings) (A) f = fc (fo - fc ) e kt (B) f = ft - (fo - fc ) e -kt (C) f = ft + (fo - fc ) e -kt (D) f = f + (fo - fc ) ekt

Description : According to Robert E. Horton, the equation of infiltration capacity curve, is (where letters carry their usual meanings) (A) f = fc (fo - fc ) e kt (B) f = ft - (fo - fc ) e -kt (C) f = ft + (fo - fc ) e -kt (D) f = f + (fo - fc ) ekt

Last Answer : Answer: Option C

Rain simulators are used for the determination of (A) Evaporation (B) Precipitation (C) Run off (D) Infiltration capacity

Description : Rain simulators are used for the determination of (A) Evaporation (B) Precipitation (C) Run off (D) Infiltration capacity

Last Answer : Answer: Option D

The theory of infiltration capacity was given by (A) Merrill Bernard (B) W.W. Horner (C) Le-Roy K. Shermen (D) Robert E. Horten

Description : The theory of infiltration capacity was given by (A) Merrill Bernard (B) W.W. Horner (C) Le-Roy K. Shermen (D) Robert E. Horten

Last Answer : Answer: Option D

The equation P - Q = Te index for determining the infiltration capacity, was suggested by (A) Horton (B) Horner (C) Lloyd (D) Bernard

Description : The equation P - Q = Te index for determining the infiltration capacity, was suggested by (A) Horton (B) Horner (C) Lloyd (D) Bernard

Last Answer : Answer: Option A

What set of surface soil conditions on a hillside would result in the most infiltration of rainfall?

Description : What set of surface soil conditions on a hillside would result in the most infiltration of rainfall?

Last Answer : What is the answer ?

Downward entry and movement of water in soil surface is — a. Percolation b. Infiltration c. Permeability d. None of these

Description : Downward entry and movement of water in soil surface is — a. Percolation b. Infiltration c. Permeability d. None of these

Last Answer : b. Infiltration

For determining the ultimate bearing capacity of soil, the recommended size of a square bearing plate to be used in load plate test should be 30 to 75 cm square with a minimum thickness of (A) 5 mm (B) 10 mm (C) 15 mm (D) 25 mm

Description : For determining the ultimate bearing capacity of soil, the recommended size of a square bearing plate to be used in load plate test should be 30 to 75 cm square with a minimum thickness of (A) 5 mm (B) 10 mm (C) 15 mm (D) 25 mm

Last Answer : Answer: Option D

How do you describe the relationship between moisture content and microbial activity as the soil is gradually increased from this dry state to a saturated one What factors dictate the shape of the cur?

Description : How do you describe the relationship between moisture content and microbial activity as the soil is gradually increased from this dry state to a saturated one What factors dictate the shape of the cur?

Last Answer : Need answer

If the potential infiltration of a water shed having a soil with fair pasture cover, is 10 cm and rainfall is 12 cm, the direct run off is : (A) 2 cm (B) 3 cm (C) 5 cm (D) 7 cm

Description : If the potential infiltration of a water shed having a soil with fair pasture cover, is 10 cm and rainfall is 12 cm, the direct run off is : (A) 2 cm (B) 3 cm (C) 5 cm (D) 7 cm

Last Answer : Answer: Option C

If S is the potential infiltration, P is rainfall in cm in a drainage of a soil with fair pasture cover, the direct run off Q in cm is given by (A) Q = (P - 0.1 S)²/(P + 0.4 S) (B) Q = (P - 0.2 S)²/(P + 0.6 S) (C) Q = (P - 0.2 S)²/(P + 0.8 S) (D) Q = (P - 0.2 S)²/(P + 0.2 S)

Description : If S is the potential infiltration, P is rainfall in cm in a drainage of a soil with fair pasture cover, the direct run off Q in cm is given by (A) Q = (P - 0.1 S)²/(P + 0.4 S) (B) Q = (P - 0.2 S)²/(P + 0.6 S) (C) Q = (P - 0.2 S)²/(P + 0.8 S) (D) Q = (P - 0.2 S)²/(P + 0.2 S)

Last Answer : Answer: Option C

Black cotton soil is unsuitable for foundations because its (A) Bearing capacity is low (B) Permeability is uncertain (C) Particles are cohesive (D) Property to undergo a volumetric change due to variation of moisture content

Description : Black cotton soil is unsuitable for foundations because its (A) Bearing capacity is low (B) Permeability is uncertain (C) Particles are cohesive (D) Property to undergo a volumetric change due to variation of moisture content

Last Answer : Answer: Option D

The weight of vehicles affects (A) Pavement thickness (B) Ruling gradient (C) Limiting gradient (D) All the above

Description : The weight of vehicles affects (A) Pavement thickness (B) Ruling gradient (C) Limiting gradient (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Absolute humidity at a given temperature is equal to weight of moisture present in a unit volume (B) Relative humidity is the ratio of actual vapour pressure and saturation vapour pressure at the same temperature (C) Relative humidity is the ratio of the weight of the vapours present per unit volume to the weight of vapours which could be contained at the same temperature when fully saturated (D) All the above

Description : Pick up the correct statement from the following: (A) Absolute humidity at a given temperature is equal to weight of moisture present in a unit volume (B) Relative humidity is the ratio of ... of vapours which could be contained at the same temperature when fully saturated (D) All the above

Last Answer : Answer: Option D

Which one of the following statements is correct? (a) Adding 5% to 6% of moisture by weight increases the volume of dry sand from 18% to 38% (b) The bulking of fine sand is more than that of coarse sand (c ) Volume of fully saturated sand is equal to that of dry sand (d) All of the above

Description : Which one of the following statements is correct? (a) Adding 5% to 6% of moisture by weight increases the volume of dry sand from 18% to 38% (b) The bulking of fine sand is more than that of coarse sand (c ) Volume of fully saturated sand is equal to that of dry sand (d) All of the above

Last Answer : (d) All of the above

The dimensions of a rectangular settling tank are: length 24 m, width 6 m and depth 3 m. If 2 hour detention period for tanks is recommended, the rate of flow of sewage per hour, is A. 204 cu.m B. 208 cu.m C. 212 cu.m D. 216 cu.m

Description : The dimensions of a rectangular settling tank are: length 24 m, width 6 m and depth 3 m. If 2 hour detention period for tanks is recommended, the rate of flow of sewage per hour, is A. 204 cu.m B. 208 cu.m C. 212 cu.m D. 216 cu.m

Last Answer : ANS: D

In a grit chamber of a sewage treatment plant, A. Flow velocity 0.15 m to 0.3 m/sec is kept B. Depth of 0.9 m to 1.20 m is kept C. One minute of detention period is kept D. All the above

Description : In a grit chamber of a sewage treatment plant, A. Flow velocity 0.15 m to 0.3 m/sec is kept B. Depth of 0.9 m to 1.20 m is kept C. One minute of detention period is kept D. All the above

Last Answer : ANS: D

The detention time of a circular tank of diameter d and water depth H, for receiving the sewage Q per hour, is A. d² (0.011d + 0.785H)/Q B. d (0.022d + 0.085H)/Q C. d (0.785d + 0.011H)/Q D. d (0.285d + 0.011H)/Q

Description : The detention time of a circular tank of diameter d and water depth H, for receiving the sewage Q per hour, is A. d² (0.011d + 0.785H)/Q B. d (0.022d + 0.085H)/Q C. d (0.785d + 0.011H)/Q D. d (0.285d + 0.011H)/Q

Last Answer : ANS: A

The settling velocity of the particles larger than 0.06 mm in a settling tank of depth 2.4 is 0.33 m per sec. The detention period recommended for the tank, is A. 30 minutes B. 1 hour C. 1 hour and 30 minutes D. 2 hours

Description : The settling velocity of the particles larger than 0.06 mm in a settling tank of depth 2.4 is 0.33 m per sec. The detention period recommended for the tank, is A. 30 minutes B. 1 hour C. 1 hour and 30 minutes D. 2 hours

Last Answer : ANS: D

In case of water logged lands a. The soil ports are saturated within a depth of 1 m b. The soil ports are situated within a depth of 60 cm c. The soil ports are situated within a depth of 40 cm b. D.The soil ports are saturated up to the root zone of the crop

Description : In case of water logged lands a. The soil ports are saturated within a depth of 1 m b. The soil ports are situated within a depth of 60 cm c. The soil ports are situated within a depth of 40 cm b. D.The soil ports are saturated up to the root zone of the crop

Last Answer : D.The soil ports are saturated up to the root zone of the crop

If the bearing capacity of soil is 10 tonnes/cm2 and the projection of plain concrete footing from walls, is a cm, the depth D of footing is (A) D = 0.0775 a (B) D = 0.775 a (C) D = 0.775 a (D) D = 0.775 a2

Description : If the bearing capacity of soil is 10 tonnes/cm2 and the projection of plain concrete footing from walls, is a cm, the depth D of footing is (A) D = 0.0775 a (B) D = 0.775 a (C) D = 0.775 a (D) D = 0.775 a2

Last Answer : Answer: Option B

Grillage foundation (A) Is used to transfer heavy structural loads from steel columns to a soil having low bearing capacity (B) Is light and economical (C) Does not require deep cutting as the required base area with required pressure intensity is obtained at a shallow depth (D) All the above

Description : Grillage foundation (A) Is used to transfer heavy structural loads from steel columns to a soil having low bearing capacity (B) Is light and economical (C) Does not require deep cutting as the required base area with required pressure intensity is obtained at a shallow depth (D) All the above

Last Answer : Answer: Option D

In case of foundations on black cotton soils, the most suitable method to increase the bearing capacity of soils is to (A) Increase the depth of foundation (B) Drain the soil (C) Compact the soil (D) Replace the poor soil

Description : In case of foundations on black cotton soils, the most suitable method to increase the bearing capacity of soils is to (A) Increase the depth of foundation (B) Drain the soil (C) Compact the soil (D) Replace the poor soil

Last Answer : Answer: Option D

The bearing capacity of a water logged soil can be improved by (A) Compacting the soil (B) Draining the soil (C) Increasing the depth of foundation (D) Grouting

Description : The bearing capacity of a water logged soil can be improved by (A) Compacting the soil (B) Draining the soil (C) Increasing the depth of foundation (D) Grouting

Last Answer : Option B

A well is sunk in an unconfined aquifer having a saturated depth of 100 m. Assuming the equilibrium flow conditions and a homogeneous aquifer and radius of influence to be same, the ratio of discharges at 20 m and 40 m draw downs, is (A) 2/3 (B) 5/4 (C) 4/5 (D) 8/7

Description : A well is sunk in an unconfined aquifer having a saturated depth of 100 m. Assuming the equilibrium flow conditions and a homogeneous aquifer and radius of influence to be same, the ratio of discharges at 20 m and 40 m draw downs, is (A) 2/3 (B) 5/4 (C) 4/5 (D) 8/7

Last Answer : Answer: Option D

Factors on which soil resistance depends: a) depth of the electrode b) moisture c) Nacl d) all the above

Description : Factors on which soil resistance depends: a) depth of the electrode b) moisture c) Nacl d) all the above

Last Answer : Ans: D

A reinforced concrete cantilever porch has thickness t. The main reinforcing steel will be placed (a) At mid-thickness (b) At t/3 from the top (c) Close to the bottom surface (d) Close to the top surface

Description : A reinforced concrete cantilever porch has thickness t. The main reinforcing steel will be placed (a) At mid-thickness (b) At t/3 from the top (c) Close to the bottom surface (d) Close to the top surface

Last Answer : (d) Close to the top surface

pF value is zero of — a. Field capacity b. PWP c. Oven dry soil d. Saturated soil

Description : pF value is zero of — a. Field capacity b. PWP c. Oven dry soil d. Saturated soil

Last Answer : d. Saturated soil

Herbicides are less effective on weeds under which of the soil condition a). Field capacity b). Saturated c). Both a and b d). Dry

Description : Herbicides are less effective on weeds under which of the soil condition a). Field capacity b). Saturated c). Both a and b d). Dry

Last Answer : d). Dry

The effective span of a simply supported slab, is (A) Distance between the centres of the bearings (B) Clear distance between the inner faces of the walls plus twice the thickness of the wall (C) Clear span plus effective depth of the slab (D) None of these

Description : The effective span of a simply supported slab, is (A) Distance between the centres of the bearings (B) Clear distance between the inner faces of the walls plus twice the thickness of the wall (C) Clear span plus effective depth of the slab (D) None of these

Last Answer : Answer: Option B

If d is the economic designed depth of a slab, the thickness of the cement concrete pavement slab at interior, is kept (A) 1.275 d (B) 1.125 d (C) 0.85 d (D) 0.75 d

Description : If d is the economic designed depth of a slab, the thickness of the cement concrete pavement slab at interior, is kept (A) 1.275 d (B) 1.125 d (C) 0.85 d (D) 0.75 d

Last Answer : Answer: Option C

The effective span of a simply supported slab is (a) Distance between the centers of the bearings (b) Clear distance between the inner faces of the walls plus twice he thickness of the slab. (c) Cleat spa plus effective depth of the slab. (d) All the above

Description : The effective span of a simply supported slab is (a) Distance between the centers of the bearings (b) Clear distance between the inner faces of the walls plus twice he thickness of the slab. (c) Cleat spa plus effective depth of the slab. (d) All the above

Last Answer : (c) Cleat spa plus effective depth of the slab.