__________ is the property of a soil to undergo large deformations when stressed, without cracking or crumbling due to the lubricating effect of the water films between adjacent particles. a. Bending b. Malleability c. Ductility d. Plasticity

__________ is the property of a soil to undergo large
deformations when stressed, without cracking or crumbling due to
the lubricating effect of the water films between adjacent particles.
a. Bending
b. Malleability
c. Ductility
d. Plasticity
by

1 Answer

Answer :

d. Plasticity
by

Related questions

The property of a material by which it can be drawn to a smaller section, due to tension, is called (A) Plasticity (B) Ductility (C) Elasticity (D) Malleability

Description : The property of a material by which it can be drawn to a smaller section, due to tension, is called (A) Plasticity (B) Ductility (C) Elasticity (D) Malleability

Last Answer : (B) Ductility

The property by which a body returns to its original shape after removal of the force, is called (A) Plasticity (B) Elasticity (C) Ductility (D) Malleability

Description : The property by which a body returns to its original shape after removal of the force, is called  (A) Plasticity  (B) Elasticity  (C) Ductility  (D) Malleability 

Last Answer : (B) Elasticity 

The property of a material by which it can be beaten or rolled into thin plates, is called (A) Malleability (B) Ductility (C) Plasticity (D) Elasticity

Description : The property of a material by which it can be beaten or rolled into thin plates, is called  (A) Malleability  (B) Ductility  (C) Plasticity  (D) Elasticity

Last Answer : (A) Malleability 

The property of the material which allows it to be drawn into smaller section (a) Plasticity (b) Ductility (c) Elasticity (d) Malleability

Description : The property of the material which allows it to be drawn into smaller section (a) Plasticity (b) Ductility (c) Elasticity (d) Malleability

Last Answer : (b) Ductility

The property of a material by which it can be drawn to a smaller section by applying a tensile load is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleability

Description : The property of a material by which it can be drawn to a smaller section by applying a tensile load is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleabilityy

Last Answer : (c) Ductility

The property of a material by which it can be beaten or rolled into thin sheets, is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleability

Description : The property of a material by which it can be beaten or rolled into thin sheets, is called (a) Elasticity (b) Plasticity (c) Ductility (d) Malleability

Last Answer : (d) Malleability

A material is able to retain the deformation permanently by virtue of its (A) Elasticity (B) Plasticity (C) Ductility (D) Malleability

Description : A material is able to retain the deformation permanently by virtue of its (A) Elasticity (B) Plasticity (C) Ductility (D) Malleability

Last Answer : (B) Plasticity

The property due to which a metal can be hammered into thin sheets without breaking is _______. a) malleability b)ductility c)tensile strength d)conductivity

Description : The property due to which a metal can be hammered into thin sheets without breaking is _______. a) malleability b)ductility c)tensile strength d)conductivity

Last Answer : a) malleability

The property of a soil which allows it to be deformed rapidly without rupture, elastic rebound and also a volume change, is known (A) Porosity (B) Plasticity (C) Permeability (D) Ductility

Description : The property of a soil which allows it to be deformed rapidly without rupture, elastic rebound and also a volume change, is known (A) Porosity (B) Plasticity (C) Permeability (D) Ductility

Last Answer : Answer: Option B

Silver is used for high precision electrical contacts in computer due to its property of ______. a) malleability b)conductivity c)ductility d)none

Description : Silver is used for high precision electrical contacts in computer due to its property of ______. a) malleability b)conductivity c)ductility d)none

Last Answer : b)conductivity

The property by virtue of which metals can be beaten into thin sheets is known as: A. Density B. Malleability C. Conductivity D. Ductility

Description : The property by virtue of which metals can be beaten into thin sheets is known as: A. Density B. Malleability C. Conductivity D. Ductility

Last Answer : ANSWER: B

The most distinguished property of malleable cast iron is its high (A) Ductility (B) Hardness (C) Malleability (D) None of these

Description : The most distinguished property of malleable cast iron is its high (A) Ductility (B) Hardness (C) Malleability (D) None of these

Last Answer : (A) Ductility

The property by virtue of which metals can be beaten into thin sheets is known as? A. Ductility B. Malleability (Answer)

Description : The property by virtue of which metals can be beaten into thin sheets is known as? A. Ductility B. Malleability (Answer)

Last Answer : B. Malleability (Answer)

The property of metals being beaten into thin sheets is called A) Ductility B) Malleability C)Brittle D)None of these

Description : The property of metals being beaten into thin sheets is called A) Ductility B) Malleability C)Brittle D)None of these

Last Answer : B) Malleability

Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.

Description : Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.

Last Answer : (A) Ductility.

Black cotton soil is unsuitable for foundations because its (A) Bearing capacity is low (B) Permeability is uncertain (C) Particles are cohesive (D) Property to undergo a volumetric change due to variation of moisture content

Description : Black cotton soil is unsuitable for foundations because its (A) Bearing capacity is low (B) Permeability is uncertain (C) Particles are cohesive (D) Property to undergo a volumetric change due to variation of moisture content

Last Answer : Answer: Option D

Which of the following property is essential for spring materials? (A) Stiffness (B) Ductility (C) Resilience (D) Plasticity

Description : Which of the following property is essential for spring materials? (A) Stiffness (B) Ductility (C) Resilience (D) Plasticity

Last Answer : (C) Resilience

In the slope deflection equations, the deformations are considered to be caused by (i) Bending moment (ii) Shear force (iii) Axial force The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Description : In the slope deflection equations, the deformations are considered to be caused by (i) Bending moment (ii) Shear force (iii) Axial force The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Last Answer : (A) Only (i)

Brittleness is opposite to (a) Toughness (b) Plasticity (c) Malleability (d) None of these

Description : Brittleness is opposite to (a) Toughness (b) Plasticity (c) Malleability (d) None of these

Last Answer : b) Plasticity

Which of the following properties is generally found, in non-metals?' (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability

Description : Which of the following properties is generally found, in non-metals?' (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability

Last Answer : (1) Brittleness Explanation: An important physical property of non metals is that they are brittle and hence cannot be beaten into sheets or drawn into wires. In other words, non-metals are non-malleable and non-ductile. Where stress is applied on nonmetals, they shatter into pieces.

Cast iron has (A) Very high tensile strength (B) High ductility (C) High malleability (D) Elastic limit close to ultimate breaking strength

Description : Cast iron has (A) Very high tensile strength (B) High ductility (C) High malleability (D) Elastic limit close to ultimate breaking strength

Last Answer : (D) Elastic limit close to ultimate breaking strength

Presence of 0.3 to 0.5% arsenic in copper increases its (A) Ductility (B) Malleability (C) Tenacity & hardness (D) Electrical conductivity

Description : Presence of 0.3 to 0.5% arsenic in copper increases its (A) Ductility (B) Malleability (C) Tenacity & hardness (D) Electrical conductivity

Last Answer : (C) Tenacity & hardness

Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Description : Copper has very low (A) Malleability (B) Ductility (C) Tensile strength (D) Thermal & electrical conductivity

Last Answer : (C) Tensile strength

Percentage elongation of a material is a measure of its (A) Ductility (B) Brittleness (C) Toughness (D) Malleability

Description : Percentage elongation of a material is a measure of its (A) Ductility (B) Brittleness (C) Toughness (D) Malleability

Last Answer : (A) Ductility

Cast iron has (A) High ductility (B) High malleability (C) Very high tensile strength (D) Its elastic limit very close to ultimate breaking strength

Description : Cast iron has (A) High ductility (B) High malleability (C) Very high tensile strength (D) Its elastic limit very close to ultimate breaking strength

Last Answer : (D) Its elastic limit very close to ultimate breaking strength

Cast iron compared to steel is better in (A) Ductility (B) Fluidity & castability (C) Strength (D) Malleability

Description : Cast iron compared to steel is better in (A) Ductility (B) Fluidity & castability (C) Strength (D) Malleability

Last Answer : (B) Fluidity & castability

The ability of a material to be formed by hammering or rolling is known as _________ a) Malleability b) Ductility c) Harness d) Brittleness

Description : The ability of a material to be formed by hammering or rolling is known as _________ a) Malleability b) Ductility c) Harness d) Brittleness

Last Answer : a) Malleability

Percentage elongation during tensile test is indication of (a) Ductility (b) Malleability (c) Creep (d) Rigidity

Description : Percentage elongation during tensile test is indication of (a) Ductility (b) Malleability (c) Creep (d) Rigidity

Last Answer : (a) Ductility

Write on ductility and malleability of material.

Description : Write on ductility and malleability of material. 

Last Answer : Ductility Ductility is the ability of a material to deform plastically without fracture under tensile load. Because of this property , materials can be drawn out into fine wire without fracture ... Gold and silver are highly malleable. Malleable metals usually bend and twist in various shapes.

Which of the following properties is generally found in nonmetals? (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability

Description : Which of the following properties is generally found in nonmetals? (1) Brittleness (2) Conductivity (3) Ductility (4) Malleability

Last Answer : Brittleness

Vulcanisation of rubber does not increase its (A) Elasticity(B) Plasticity(C) Ductility(D) None of these

Description : Vulcanisation of rubber does not increase its (A) Elasticity (B) Plasticity (C) Ductility (D) None of these

Last Answer : (B) Plasticity

Define ductility; plasticity; hardness strength.

Description : Define ductility; plasticity; hardness strength.

Last Answer : Definition: 1) Ductility Ductility is the ability of a material to be deformed plastically without fracture under tensile strength. Ductility is the property of material by which materials can be ... or cutting. The ability of a material to resist wear or abrasion and resist penetration.

Define ductility and plasticity.

Description : Define ductility and plasticity.

Last Answer : Ductility: It is the property of material to undergo a considerable deformation under tension before rupture.  Plasticity: The plasticity of a material is the ability to change its shape without destruction ... to it when the forces are removed. OR Lack of elasticity is called as plasticity. 

The property of soil which allows it to be deformed rapidly, without rupture, without elastic rebound and without volume change is known as a) Porosity b) Plasticity* c) Stiffness d) Plastic limit

Description : The property of soil which allows it to be deformed rapidly, without rupture, without elastic rebound and without volume change is known as a) Porosity b) Plasticity* c) Stiffness d) Plastic limit

Last Answer : b) Plasticity*

Furfural solvent extraction is used for upgrading (by dissolving aromatics) (A) Naphtha (B) Lubricating oils (C) Wax (D) Cracking feedstock

Description : Furfural solvent extraction is used for upgrading (by dissolving aromatics) (A) Naphtha (B) Lubricating oils (C) Wax (D) Cracking feedstock

Last Answer : (B) Lubricating oils

When the nurse auscultates chest sounds that are harsh and cracking, sounding like two pieces of leather being rubbed together, she records her finding as a) pleural friction rub. A pleural friction rub is heard secondary to inflammation and loss of lubricating pleural fluid. b) crackles. Crackles are soft, high-pitched, discontinuous popping sounds that occur during inspiration. c) sonorous wheezes. Sonorous wheezes are deep, low-pitched rumbling sounds heard primarily during expiration. d) sibilant wheezes. Sibilant wheezes are continuous, musical, high-pitched, whistle-like sounds heard during inspiration and expiration.

Description : When the nurse auscultates chest sounds that are harsh and cracking, sounding like two pieces of leather being rubbed together, she records her finding as a) pleural friction rub. A ... wheezes are continuous, musical, high-pitched, whistle-like sounds heard during inspiration and expiration.

Last Answer : a) pleural friction rub. A pleural friction rub is heard secondary to inflammation and loss of lubricating pleural fluid.

Pick up the assumption for the design of a pre-stressed concrete member from the following: (A) A transverse plane section remains a plane after bending (B) During deformation limits, Hook's law is equally applicable to concrete as well as to steel (C) Variation of stress in reinforcement due to changes in external loading is negligible (D) All the above

Description : Pick up the assumption for the design of a pre-stressed concrete member from the following: (A) A transverse plane section remains a plane after bending (B) During deformation limits, Hook's ... of stress in reinforcement due to changes in external loading is negligible (D) All the above

Last Answer : Answer: Option D

Concerning educational films, it can be truthfully said that Options: A) They differ from commercial films chiefly is the basis of nature of the film B) Motion picture production by school children has proved to be a failure C) War developments advanced the educational use of films by decades D) The interest factor in educational films was stressed from the start

Description : Concerning educational films, it can be truthfully said that Options: A) They differ from commercial films chiefly is the basis of nature of the film B) Motion picture production by school children ... use of films by decades D) The interest factor in educational films was stressed from the start

Last Answer : C) War developments advanced the educational use of films by decades 

The interference in thin films is because (a) The film reflects some light (b) The film is thin enough so that refracted ray is close to reflected ray (c) The reflected ray undergo path change of λ/2 (d) All of above

Description : The interference in thin films is because (a) The film reflects some light (b) The film is thin enough so that refracted ray is close to reflected ray (c) The reflected ray undergo path change of λ/2 (d) All of above

Last Answer : (d) All of above

Carbon particles accumulated on the catalyst used in the gas oil cracking lies in the category of __________ poison. (A) Deposited (B) Chemisorbed (C) Selectivity (D) Stability

Description : Carbon particles accumulated on the catalyst used in the gas oil cracking lies in the category of __________ poison. (A) Deposited (B) Chemisorbed (C) Selectivity (D) Stability

Last Answer : (A) Deposited

How can I rebind an old, crumbling book without destroying the pages and also without making it too tight to lie flat?

Description : How can I rebind an old, crumbling book without destroying the pages and also without making it too tight to lie flat?

Last Answer : Umm I'm not sure how to do that to the book itself and hope someone else can make a good suggestion for that- but what I'm wondering is if one option is keeping that book as it is- ... and present, but have the pages carefully copied then bound into a plastic ring spine music book of your own?

Which of the following helps in lubricating and adhering the mastricated food particles into a bolus

Description : Which of the following helps in lubricating and adhering the mastricated food particles into a bolus

Last Answer : Which of the following helps in lubricating and adhering the mastricated food particles into a bolus ... Secretion of lacrymal gland D. Gastric juice

The property of material, by which a given amount of energy is absorbed by it without plastic deformation, is called the (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Description : The property of material, by which a given amount of energy is absorbed by it without plastic deformation, is called the (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Last Answer : (A) Resilience

The property of material, by which a given amount of energy is absorbed by it, without plastic deformation, is called (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Description : The property of material, by which a given amount of energy is absorbed by it, without plastic deformation, is called (A) Resilience (B) Toughness (C) Ductility (D) Impact strength

Last Answer : (A) Resilience

is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) (B) f = (A/P) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)

Description : is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) ... ) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)

Last Answer : Answer: Option C

is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)

Description : is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)

Last Answer : Answer: Option C

The admixture of coarser particles like sand or silt to clay causes (A) Decrease in liquid limit and increase in plasticity index (B) Decrease in liquid limit and no change in plasticity index (C) Decrease in both liquid limit and plasticity index (D) Increase in both liquid limit and plasticity index

Description : The admixture of coarser particles like sand or silt to clay causes (A) Decrease in liquid limit and increase in plasticity index (B) Decrease in liquid limit and no change in plasticity index ... in both liquid limit and plasticity index (D) Increase in both liquid limit and plasticity index

Last Answer : Answer: Option C

Consider the following statements: 1. Mercury metal exists as a liquid at room temperature. 2. The property of metals by which they can be beaten into thin sheets is called malleability 3. Neutral fats such as butter and vegetable oils are mostly triglycerides. 4. The size of an atom is of the order of 10 - 15 m. The correct statements are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 2, 3 and 4 only (d) 1, 2 and 3 only

Description : Consider the following statements: 1. Mercury metal exists as a liquid at room temperature. 2. The property of metals by which they can be beaten into thin sheets is called malleability 3. Neutral fats such as butter and vegetable oils ... b) 1, 3 and 4 only (c) 2, 3 and 4 only (d) 1, 2 and 3 only

Last Answer : Ans:(d)

The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability? (A) Lead (B) Copper (C) Aluminium (D) Wrought iron

Description : The malleability of a material is the property by virtue of which it can be rolled or hammered into thin sheets. Which of the following materials has the maximum malleability? (A) Lead (B) Copper (C) Aluminium (D) Wrought iron

Last Answer : (A) Lead