The silica is used for preparing
(A) Silica bricks
(B) Coke oven
(C) Lining for glass furnaces
(D) All of these

1 Answer

Answer :

Answer: Option D

Related questions

Description : Which of the following bricks are used for lining of furnaces? (A) Over-burnt bricks (B) Under-burnt bricks (C) Refractory bricks (D) First class bricks

Last Answer : Answer: Option C

Description : Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Last Answer : (A) Fire clay

Description : Coke oven walls are lined with __________ bricks. (A) Silica (B) Tar-dolomite (C) Low thermal conductivity (D) Fire clay

Last Answer : (A) Silica

Description : Height of coke oven is limited (say maximum upto 7 metres) mainly by the (A) Problem of uniform heating along its height (B) Structural strength of silica bricks (C) Problem in door cleaning (D) Buckling of ram of pusher car at the time of coke pushing

Last Answer : (A) Problem of uniform heating along its height

Description : Naphthalene recovered from coke oven gas is used (A) As moisture proof coating on fibres (B) As moth balls (insecticides) (C) As a fuel in furnaces (D) For making electrodes

Last Answer : (C) As a fuel in furnaces

Description : Beehive coke ovens are made of __________ bricks. (A) Silica (B) Fireclay (C) Silicon carbide (D) Corundum

Last Answer : (A) Silica

Description : Which adsorbent is used for removing sulphur compounds (S Q, H2S, RSH etc.) removal from coke oven gas in by-products recovery plant? (A) Silica gel (B) Diatomaceous earth (C) Basalt (D) Bog iron (i.e., moist ferric hydroxide)

Last Answer : (D) Bog iron (i.e., moist ferric hydroxide)

Description : Coke oven gas is stripped of its H2S and mercaptans content by (A) Absorption in wash oil (B) Adsorption on bog iron bed (C) Bubbling it through dilute sulphuric acid (D) Adsorption on silica gel

Last Answer : (B) Adsorption on bog iron bed

Description : Pick up the correct statement from the following: (A) The percentage of absorption for firebricks varies from 5 to 10 (B) The percentage of silica in silica bricks is to the extent of about 95 to 97 ... to 2 percent of lime in silica bricks is added to act as binding material (D) All the above

Last Answer : Answer: Option D

Description : Excess of silica in brick earth results in (A) Cracking and warping of bricks (B) Loss of cohesion (C) Enhancing the impermeability of bricks (D) None of the above

Last Answer : Answer: Option B

Description : Soft coke is not (A) Produced by low temperature carbonisation of coal (B) A domestic fuel (C) Used in blast furnaces (D) None of these

Last Answer : (C) Used in blast furnaces

Description : Is there any way to slow coke formation in ethylene furnaces?

Last Answer : Westaim Corporation has a commercial process for applying a special coating to the tubes used in ethylene furnaces. Westaim claims that coke buildup is reduced to one-forth to one-tenth of the ... then heat-treated and reacted with an unspecified gas. Welds cannot be coated with this process.

Description : Don't the bricks crack when I use them around the fireplace?

Last Answer : You can give bricks. Wet stones are worse. They crack when heated.

Description : In which of the following furnaces, the gases are sucked through the stock bed from below? (A) Soaking pit (B) Sintering machine (C) Beehive oven (D) None of these

Last Answer : (B) Sintering machine

Description : The refractory lining of the bottom in a basic electric arc furnace is made of (A) Silica (B) Alumina (C) Magnesia (D) Fireclay

Last Answer : Option C

Description : Regenerator is widely used in: a) Reheating Furnaces b) heat treatment furnaces c) Baking Ovens d) glass melting furnaces

Last Answer : glass melting furnaces

Description : Absorptivity of a perfect black body is unity. Which of the following has maximum absorptivity? (A) Aluminium foil (B) Refractory bricks (C) Iron plate (D) Coke breeze

Last Answer : (D) Coke breeze

Description : In regenerative air preheater (as practised in heating of coke ovens), the heat is transferred (A) Through a metallic wall (B) By direct contact of hot flue gas with air (C) By ... material (like chequor bricks) and then heating the air from this hot material (D) None of these

Last Answer : (C) By heating an intermediate material (like chequor bricks) and then heating the air from this hot material

Description : Percentage content of silica in window glass, is (A) 40 to 45 (B) 50 to 55 (C) 60 to 65 (D) 70 to 75

Last Answer : Answer: Option D

Description : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then smelted in a blast furnace. The matt

Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and ... D. `Cu_(2)O +FeO`(large amount).

Description : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then smelted in a blast furnace. The matt

Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then ... CaSiO_(3)` D. `Cu_(2)O.SiO_(2)`

Description : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then smelted in a blast furnace. The matt

Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and ... (3)` D. To check the reduction of FeO

Description : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then smelted in a blast furnace. The matt

Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then ... O` D. `CuCO_(3).Cu(OH)_(2)`

Description : Electric furnace method for production of phosphorous uses phosphate rock and __________ (A) Phosphoric acid (B) Coke (C) Sulphuric acid (D) Silica and coke

Last Answer : (D) Silica and coke

Description : __________ is used as a flux in the smelting of copper ore like chalcopyrite. (A) Coke breeze (B) Lime powder (C) Silica/quartz (D) Dolomite

Last Answer : (C) Silica/quartz

Description : Which of the following is NOT a means of preparing carbon dioxide? w) burning coke in the absence of air x) combustion of methane y) heating certain normal carbonates z) action of acids on carbonates

Last Answer : ANSWER: W -- BURNING COKE IN THE ABSENCE OF AIRĀ 

Description : Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise ... cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Description : Chlorination of benzene is done to produce benzene hexachloride (a pesticide) in a photochemical reactor lined with (A) Karbate (B) Lead or glass (C) Fireclay bricks (D) PVC

Last Answer : (B) Lead or glass

Description : Which of the following is the most widely used heat insulating material for pipelines carrying steam? (A) Tar dolomite bricks followed by asbestos (B) Fireclay refractory followed by aluminium sheet (C) Cotton followed by aluminium foil (D) 85% magnesia cement and glass wool

Last Answer : (D) 85% magnesia cement and glass wool

Description : Pot furnace which is either regenerative or recuperative, is used in the manufacture of (A) Glass (B) Stainless steel (C) Potteries (D) Refractory bricks

Last Answer : (A) Glass

Description : Out of the following, maximum temperature drop for a given heat flow & for the same thickness will be in the case of (A) Steel (B) Glass wood (C) Copper (D) Fireclay bricks

Last Answer : B) Glass wood

Description : Traces of liquid tar fog present in coke oven gas is separated using (A) Electrostatic precipitator (B) Cyclone separator (C) Strainer (D) None of these

Last Answer : (A) Electrostatic precipitato

Description : Bog iron used for the adsorption of H2S from coke oven gas is (A) An intimate mixture of saw dust and iron dust (i.e. moist ferric hydroxide) (B) Iron impregnated with resin (usually Bakelite) (C) Carbon free iron (D) None of these

Last Answer : (A) An intimate mixture of saw dust and iron dust (i.e. moist ferric hydroxide)

Description : Absorption with chemical reaction' is involved in the removal of (A) Carbon dioxide from gaseous stream using alkaline solution (B) Benzol from coke oven gas using solar oil/wash oil (C) Ammonia ... gas using refrigerated water (D) Tar from coke oven gas in primary gas coolers using chilled water

Last Answer : (A) Carbon dioxide from gaseous stream using alkaline solution

Description : Absorption accompanied with chemical reaction is exemplified by the absorption of (A) Ammonia in water (B) Benzol present in coke oven gas by wash oil (C) SO2 in alkaline solution (D) All (A), (B) and (C)

Last Answer : (C) SO2 in alkaline solution

Description : Removal of __________ exemplifies an adsorption unit operation. (A) Uranium from its ore (B) Water from petrol (C) Ammonia from coke oven gas (D) Mustard oil from mustard seed

Last Answer : (B) Water from petro

Description : Ammonia present in the coke oven gas is removed by washing with (A) Caustic solution (B) Dilute ammoniacal liquor (C) Dilute HCl (D) Ethanolamine

Last Answer : (B) Dilute ammoniacal liquor

Description : Which furnace employs natural draft? (A) Coke oven (B) Boiler (C) Rotary kilns (D) L.D. converter

Last Answer : (A) Coke oven

Description : Coke ovens in steel plant are heated by (A) Electricity (B) Blast furnace gas/mixed gas (C) Coke oven gas (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Description : Which of the following is not a directly fired furnace? (A) By-product coke oven (B) Calcination kiln (C) Sintering furnace (D) Open hearth furnace

Last Answer : (A) By-product coke oven

Description : Regenerators are used for waste heat recovery in (A) By-product coke ovens (B) Beehive coke oven (C) Blast furnace stoves (D) Soaking pits

Last Answer : (A) By-product coke ovens

Description : Which is a regenerative furnace? (A) Coke oven heating chamber (B) Open hearth furnace (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Description : In a furnace operation, which is not preheated? (A) Solid fuels (B) Hydrocarbon containing fuel gases (e.g. coke oven gas, refinery gas etc.) (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Description : Fuel used in B.F. stove is (A) Pulverised coal (B) Furnace oil (C) Blast furnace gas/mixed gas (D) Coke oven gas

Last Answer : (C) Blast furnace gas/mixed gas

Description : Which furnace employs an I.D. fan for the removal of flue gases from the furnace? (A) Coke oven (B) Blast furnace stoves (C) Beehive coke oven (D) High pressure boiler

Last Answer : (D) High pressure boiler

Description : Which of the following is not a recuperative furnace? (A) Soaking pit (B) Reheating furnace (C) Steam boiler (D) Coke oven

Last Answer : (D) Coke oven

Description : . An example of a periodic furnace is the (A) Blast furnace stoves (B) Blast furnace (C) Coke oven heating chamber (D) Rotary kilns

Last Answer : (A) Blast furnace stoves

Description : Which of the following is not a by-product fuel? (A) Producer gas (B) Blast furnace gas (C) Coke oven gas (D) Refinery gas

Last Answer : (A) Producer gas

Description : Coke oven gas consists mainly of (A) H2 & CH4 (B) CO & CO2 (C) H2 & CO (D) CH4 & CO

Last Answer : (A) H2 & CH4

Description : Which of the following has the least calorific value (kcal/Nm3 )? (A) Blast furnace gas (B) Coke oven gas (C) Sewage gas (D) Natural gas

Last Answer : (A) Blast furnace gas