Excess of silica in brick earth results in (A) Cracking and warping of bricks (B) Loss of cohesion (C) Enhancing the impermeability of bricks (D) None of the above

Excess of silica in brick earth results in
(A) Cracking and warping of bricks
(B) Loss of cohesion
(C) Enhancing the impermeability of bricks
(D) None of the above
by

1 Answer

Answer :

Answer: Option B
by

Related questions

The presence of sand in brick earth prevents: (A) Cracking of bricks (B) Shrinkage of bricks (C) Warping of bricks (D) None of these

Description : The presence of sand in brick earth prevents: (A) Cracking of bricks (B) Shrinkage of bricks (C) Warping of bricks (D) None of these

Last Answer : Answer: Option C

Excess of alumina in brick earth makes the brick (A) Impermeable (B) Brittle and weak (C) To lose cohesion (D) To crack and warp on drying

Description : Excess of alumina in brick earth makes the brick (A) Impermeable (B) Brittle and weak (C) To lose cohesion (D) To crack and warp on drying

Last Answer : Answer: Option D

Pick up the constituent of good brick earth whose excess causes the raw bricks shrink and warp during drying and burning, from the following: (A) Alumina (B) Lime (C) Iron-oxide (D) Magnesia

Description : Pick up the constituent of good brick earth whose excess causes the raw bricks shrink and warp during drying and burning, from the following: (A) Alumina (B) Lime (C) Iron-oxide (D) Magnesia

Last Answer : Answer: Option A

The main ingredient of a good quality brick earth, is (A) Magnesia (B) Lime (C) Silica (D) Alumina

Description : The main ingredient of a good quality brick earth, is (A) Magnesia (B) Lime (C) Silica (D) Alumina

Last Answer : Answer: Option D

A good brick earth should contain: (A) About 20% to 30% of alumina (B) About 50% to 60% of silica (C) Not more than 5% of lime (D) All the above

Description : A good brick earth should contain: (A) About 20% to 30% of alumina (B) About 50% to 60% of silica (C) Not more than 5% of lime (D) All the above

Last Answer : Answer: Option D

Percentage of silica in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80

Description : Percentage of silica in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80

Last Answer : Answer: Option C

Which of the following ingredients of the brick earth enables the brick to retain its shape? (A) Alumina (B) Silica (C) Iron (D) Magnesia

Description : Which of the following ingredients of the brick earth enables the brick to retain its shape? (A) Alumina (B) Silica (C) Iron (D) Magnesia

Last Answer : Answer: Option B

Which of the following pairs gives a correct combination of the useful and harmful constituents respectively of a good brick earth? (A) Lime stone and alumina (B) Silica and alkalies (C) Alumina and iron (D) Alkalies and magnesium

Description : Which of the following pairs gives a correct combination of the useful and harmful constituents respectively of a good brick earth? (A) Lime stone and alumina (B) Silica and alkalies (C) Alumina and iron (D) Alkalies and magnesium

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) The percentage of absorption for firebricks varies from 5 to 10 (B) The percentage of silica in silica bricks is to the extent of about 95 to 97 percent (C) Roughly 1 to 2 percent of lime in silica bricks is added to act as binding material (D) All the above

Description : Pick up the correct statement from the following: (A) The percentage of absorption for firebricks varies from 5 to 10 (B) The percentage of silica in silica bricks is to the extent of about 95 to 97 ... to 2 percent of lime in silica bricks is added to act as binding material (D) All the above

Last Answer : Answer: Option D

The silica is used for preparing (A) Silica bricks (B) Coke oven (C) Lining for glass furnaces (D) All of these

Description : The silica is used for preparing (A) Silica bricks (B) Coke oven (C) Lining for glass furnaces (D) All of these

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The average crushing strength of hand moulded bricks is 6000 t/m2 (B) The average tensile strength of hand moulded brick is 200 t/m2 (C) The average shearing strength of hand moulded brick is 600 t/m2 (D) All the above

Description : Pick up the correct statement from the following: (A) The average crushing strength of hand moulded bricks is 6000 t/m2 (B) The average tensile strength of hand moulded brick is 200 t/m2 (C) The average shearing strength of hand moulded brick is 600 t/m2 (D) All the above

Last Answer : Answer: Option D

For one cubic metre of brick masonry, number of bricks required, is (A) 400 (B) 425 (C) 450 (D) 500

Description : For one cubic metre of brick masonry, number of bricks required, is (A) 400 (B) 425 (C) 450 (D) 500

Last Answer : Answer: Option D

Minimum thickness of wall where single Flemish bond can be used is (A) Half brick thick (B) One brick thick (C) One and a half bricks thick (D) Two bricks thick

Description : Minimum thickness of wall where single Flemish bond can be used is (A) Half brick thick (B) One brick thick (C) One and a half bricks thick (D) Two bricks thick

Last Answer : Answer: Option C

A queen closer is a (A) Brick laid with its length parallel to the face or direction of wall (B) Brick laid with its breadth parallel to the face or direction of wall (C) Brick having the same length and depth as the other bricks but half the breadth (D) Brick with half the width at one end and full width at the other

Description : A queen closer is a (A) Brick laid with its length parallel to the face or direction of wall (B) Brick laid with its breadth parallel to the face or direction of wall (C) Brick having the same ... bricks but half the breadth (D) Brick with half the width at one end and full width at the other

Last Answer : Answer: Option C

Number of bricks required for one cubic metre of brick masonry is (A) 400 (B) 450 (C) 500 (D) 550

Description : Number of bricks required for one cubic metre of brick masonry is (A) 400 (B) 450 (C) 500 (D) 550

Last Answer : Answer: Option C

Brick nogging type of partition wall, is constructed by (A) Laying bricks as stretchers in cement mortar (B) Laying bricks as headers in cement mortar (C) Reinforcing brick wall with iron straps (D) Constructing brick work within a wooden framework

Description : Brick nogging type of partition wall, is constructed by (A) Laying bricks as stretchers in cement mortar (B) Laying bricks as headers in cement mortar (C) Reinforcing brick wall with iron straps (D) Constructing brick work within a wooden framework

Last Answer : Answer: Option D

Herringbone bond is used for (A) Walls having thickness more than 4 bricks (B) Architectural finish to the face work (C) Ornamental panels in brick flooring (D) All the above

Description : Herringbone bond is used for (A) Walls having thickness more than 4 bricks (B) Architectural finish to the face work (C) Ornamental panels in brick flooring (D) All the above

Last Answer : Answer: Option D

To obtain good bonding in brick masonry (A) First class bricks are used (B) Vertical joints in alternate courses are kept in plumb line (C) Bats are used where necessary (D) All the above

Description : To obtain good bonding in brick masonry (A) First class bricks are used (B) Vertical joints in alternate courses are kept in plumb line (C) Bats are used where necessary (D) All the above

Last Answer : Option D

Which of the following constituents impart plasticity to brick earth a) Alumina* b) Silica c) Lime d) Magnesia

Description : Which of the following constituents impart plasticity to brick earth a) Alumina* b) Silica c) Lime d) Magnesia

Last Answer : a) Alumina*

Which of the following ingredients of Brick earth enables the brick to retain its shape a) Alumina b) Silica* c) Iron d) Magnesia

Description : Which of the following ingredients of Brick earth enables the brick to retain its shape a) Alumina b) Silica* c) Iron d) Magnesia

Last Answer : b) Silica*

Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Description : Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Last Answer : (A) Fire clay

Coke oven walls are lined with __________ bricks. (A) Silica (B) Tar-dolomite (C) Low thermal conductivity (D) Fire clay

Description : Coke oven walls are lined with __________ bricks. (A) Silica (B) Tar-dolomite (C) Low thermal conductivity (D) Fire clay

Last Answer : (A) Silica

Beehive coke ovens are made of __________ bricks.(A) Silica (B) Fireclay (C) Silicon carbide (D) Corundum

Description : Beehive coke ovens are made of __________ bricks. (A) Silica (B) Fireclay (C) Silicon carbide (D) Corundum

Last Answer : (A) Silica

Height of coke oven is limited (say maximum upto 7 metres) mainly by the(A) Problem of uniform heating along its height(B) Structural strength of silica bricks(C) Problem in door cleaning(D) Buckling of ram of pusher car at the time of coke pushing

Description : Height of coke oven is limited (say maximum upto 7 metres) mainly by the (A) Problem of uniform heating along its height (B) Structural strength of silica bricks (C) Problem in door cleaning (D) Buckling of ram of pusher car at the time of coke pushing

Last Answer : (A) Problem of uniform heating along its height

Efflorescence in cement is caused due to an excess of (A) Alumina (B) Iron oxide (C) Silica (D) Alkalis

Description : Efflorescence in cement is caused due to an excess of (A) Alumina (B) Iron oxide (C) Silica (D) Alkalis

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Lime in excess, causes the cement to expand and disintegrate (B) Silica in excess, causes the cement to set slowly (C) Alumina in excess, reduces the strength of the cement (D) All the above

Description : Pick up the correct statement from the following: (A) Lime in excess, causes the cement to expand and disintegrate (B) Silica in excess, causes the cement to set slowly (C) Alumina in excess, reduces the strength of the cement (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The lime in excess makes the cement unsound and causes the cement to expand and disintegrate (B) The silica in excess makes the cement stronger but its setting time also increases (C) The excess amount of alumina weakens the cement (D) All the above

Description : Pick up the correct statement from the following: (A) The lime in excess makes the cement unsound and causes the cement to expand and disintegrate (B) The silica in excess makes the cement stronger ... time also increases (C) The excess amount of alumina weakens the cement (D) All the above

Last Answer : Answer: Option D

Efflorescence is cement is caused due to the excess of (a) Lime (b) Silica (c) Alkalies (d) Iron oxide

Description : Efflorescence is cement is caused due to the excess of (a) Lime (b) Silica (c) Alkalies (d) Iron oxide

Last Answer : (c) Alkalies

Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Description : Which of the following ingredient of cement when added in excess quantity, causes the cement to set slowly. (a) Lime (b) Silica (c) Alumina (d) Iron oxide

Last Answer : Lime is a common ingredient in cement. It is typically added in small amounts to help the cement set more quickly. Adding too much lime can cause the cement to set slowly. Alumina, silica, and iron oxide are also common ingredients in cement, but they do not have an effect on the setting time.

Efflorescence in cement is caused due to an excess of [ A ] Alkalies [ B ] Silica [ C ] Iron oxide [ D ] Alumina

Description : Efflorescence in cement is caused due to an excess of [ A ] Alkalies [ B ] Silica [ C ] Iron oxide [ D ] Alumina

Last Answer : [ A ] Alkalies

Jack has 8 bricks 7 of them weights the same amount and one is slightly heavier. Using a balance scale, how can Jack find the heavier brick in two weighings? -Riddles

Description : Jack has 8 bricks 7 of them weights the same amount and one is slightly heavier. Using a balance scale, how can Jack find the heavier brick in two weighings? -Riddles

Last Answer : First he split them in to piles of 3, 3, and 2 bricks. Then he weighs both groups of 3 with each other. If they balance he knows the brick is one of the 2 unweighed bricks and he can weigh ... will know the brick left unweighed is heavier, or if they do not balance, he will find the heavier one.

How many bricks does it take to complete a brick building? -Riddles

Description : How many bricks does it take to complete a brick building? -Riddles

Last Answer : One brick.

How many bricks will be required to construct a wall 8 m long, 6 m high and 22.5 cm thick, if each brick measures 25 cm x 11.25 cm x 6 cm? -Maths 9th

Description : How many bricks will be required to construct a wall 8 m long, 6 m high and 22.5 cm thick, if each brick measures 25 cm x 11.25 cm x 6 cm? -Maths 9th

Last Answer : ∵ Volume of one brick = (25 × 11.25 × 6) cm3 and volume of the wall = (800 × 600 × 22.5) cm3 ∴ Number of bricks = Volume of the walls / Volume of one brick = 800 × 600 × 22.5 / 25 × 11.25 × 6 = 6400

How many bricks will be required to construct a wall 8 m long, 6 m high and 22.5 cm thick, if each brick measures 25 cm x 11.25 cm x 6 cm? -Maths 9th

Description : How many bricks will be required to construct a wall 8 m long, 6 m high and 22.5 cm thick, if each brick measures 25 cm x 11.25 cm x 6 cm? -Maths 9th

Last Answer : ∵ Volume of one brick = (25 × 11.25 × 6) cm3 and volume of the wall = (800 × 600 × 22.5) cm3 ∴ Number of bricks = Volume of the walls / Volume of one brick = 800 × 600 × 22.5 / 25 × 11.25 × 6 = 6400

If a brick weighs 4800 grams how many such bricks will be needed to make 3 tonnes?

Description : If a brick weighs 4800 grams how many such bricks will be needed to make 3 tonnes?

Last Answer : A tonne , otherwise called a metric ton in the United States, is a non-SI metric unit of mass equal to 1,000 kilograms (1,000,000 grams).1,000,000/4,800 = 208.33..So two hundred and eight and a third bricks.

Number of bricks required for 1 cubic meter of brick masonry is a)400 b) 450 c) 500* d) 550

Description : Number of bricks required for 1 cubic meter of brick masonry is a)400 b) 450 c) 500* d) 550

Last Answer : c) 500*

. Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Description : . Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Description : Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Last Answer : (A) Silica-alumina

Tie bars in cement concrete pavements are at (A) Expansion joints (B) Contraction joints (C) Warping joints (D) Longitudinal joints

Description : Tie bars in cement concrete pavements are at (A) Expansion joints (B) Contraction joints (C) Warping joints (D) Longitudinal joints

Last Answer : Answer: Option D

The critical combination of stresses for corner region in cement concrete roads is (A) Load stress + warping stress frictional stress (B) Load stress + warping stress + frictional stress (C) Load stress + warping stress (D) Load stress + frictional stress

Description : The critical combination of stresses for corner region in cement concrete roads is (A) Load stress + warping stress frictional stress (B) Load stress + warping stress + frictional stress (C) Load stress + warping stress (D) Load stress + frictional stress

Last Answer : Answer: Option C

The function of an expansion joint in rigid pavements is to (A) Relieve warping stresses (B) Relieve shrinkage stresses (C) Resist stresses due to expansion (D) Allow free expansion

Description : The function of an expansion joint in rigid pavements is to (A) Relieve warping stresses (B) Relieve shrinkage stresses (C) Resist stresses due to expansion (D) Allow free expansion

Last Answer : Answer: Option D

In a concrete pavement, during summer, at and soon after mid-day, the combined stress at the interior of the slab is equal to : (a) Wheel load stress + Temperature warping stress + Sub grade resistance stress (b) Wheel load stress + Temperature warping stress – Sub grade resistant stress (c) Wheel load stress – Temperature warping stress + Sub grade resistant stress (d) Wheel load stress – Temperature warping stress − Sub grade resistant stress

Description : In a concrete pavement, during summer, at and soon after mid-day, the combined stress at the interior of the slab is equal to : (a) Wheel load stress + Temperature warping stress + Sub ... + Sub grade resistant stress (d) Wheel load stress - Temperature warping stress − Sub grade resistant stress

Last Answer : (b) Wheel load stress + Temperature warping stress – Sub grade resistant stress

The seeds of certain plants fail to germinate if they do not pass through the digestive tract of fruit-eating birds. This is due to - (1) hibernation (2) seed coat impermeability (3) infertility (4) vegetative reproduction

Description : The seeds of certain plants fail to germinate if they do not pass through the digestive tract of fruit-eating birds. This is due to - (1) hibernation (2) seed coat impermeability (3) infertility (4) vegetative reproduction

Last Answer : (2) seed coat impermeability Explanation: A dormant seed is one that is unable to germinate in a specified period of time under a combination of environmental factors that are ... to prevent germination during unsuitable ecological conditions, but the probability of seedling survival is low.

Cell wall shows (a) complete permeability (b) semipermeability (c) differential permeability (d) impermeability.

Description : Cell wall shows (a) complete permeability (b) semipermeability (c) differential permeability (d) impermeability.

Last Answer : (a) complete permeability

The seeds of certain plants fail to germinate if they do not pass through the digestive tract of fruit-eating birds. This is due to (1) hibernation (2) seed coat impermeability (3) infertility (4) vegetative reproduction

Description : The seeds of certain plants fail to germinate if they do not pass through the digestive tract of fruit-eating birds. This is due to (1) hibernation (2) seed coat impermeability (3) infertility (4) vegetative reproduction 

Last Answer : seed coat impermeability

The effect of cohesion on a soil is to A) Reduce both the active earth pressure intensity and passive earth pressure intensity (B) Increase both the active earth pressure intensity and passive earth pressure intensity (C) Reduce the active earth pressure intensity but to increase the passive earth pressure intensity (D) Increase the active earth pressure intensity but to reduce the passive earth pressure intensity

Description : The effect of cohesion on a soil is to A) Reduce both the active earth pressure intensity and passive earth pressure intensity (B) Increase both the active earth pressure intensity and ... (D) Increase the active earth pressure intensity but to reduce the passive earth pressure intensity

Last Answer : Answer: Option C

Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) Burning the fuel with theoretically required amount of pure oxygen results in attainment of maximum adiabatic flame temperature (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Description : Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) ... flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Last Answer : (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature

A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of thermal conductivity 0.14 W/m.K and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5

Description : A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of ... and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5

Last Answer : (B) 0.1

Preserving Books: What cover should I use for this? How do I prevent warping?

Description : Preserving Books: What cover should I use for this? How do I prevent warping?

Last Answer : answer:Ideally the materials need to be kept protected from three things: 1. Sunlight 2. Humidity (and much higher humidity or moistness, resulting in mildew or mold) 3. Oxygen in the air ... . The warping is definitely humidity, though. That's a much more realistic concern than temperature alone.

Which one of the following east flowing rivers of India has rift valley due to down warping (a) Damodar (b) Mahanadi (c) Sone (d) Yamuna

Description : Which one of the following east flowing rivers of India has rift valley due to down warping (a) Damodar (b) Mahanadi (c) Sone (d) Yamuna

Last Answer : Ans: (a)