In which of the following furnaces, the gases are sucked through the stock bed from below? (A) Soaking pit (B) Sintering machine (C) Beehive oven (D) None of these

In which of the following furnaces, the gases are sucked through the
stock bed from below?
(A) Soaking pit
(B) Sintering machine
(C) Beehive oven
(D) None of these
by

1 Answer

Answer :

(B) Sintering machine
by

Related questions

In furnaces operating at very high temperature (say) 1250°C, e.g. soaking pit), the maximum heat transfer takes place by (A) Conduction (B) Convection (C) Radiation (D) Cannot be predicted

Description : In furnaces operating at very high temperature (say) 1250°C, e.g. soaking pit), the maximum heat transfer takes place by (A) Conduction (B) Convection (C) Radiation (D) Cannot be predicted

Last Answer : (C) Radiation

Regenerators are used for waste heat recovery in (A) By-product coke ovens (B) Beehive coke oven (C) Blast furnace stoves (D) Soaking pits

Description : Regenerators are used for waste heat recovery in (A) By-product coke ovens (B) Beehive coke oven (C) Blast furnace stoves (D) Soaking pits

Last Answer : (A) By-product coke ovens

Which of the following is not a recuperative furnace? (A) Soaking pit (B) Reheating furnace(C) Steam boiler(D) Coke oven

Description : Which of the following is not a recuperative furnace? (A) Soaking pit (B) Reheating furnace (C) Steam boiler (D) Coke oven

Last Answer : (D) Coke oven

Which furnace employs an I.D. fan for the removal of flue gases from the furnace? (A) Coke oven(B) Blast furnace stoves(C) Beehive coke oven(D) High pressure boiler

Description : Which furnace employs an I.D. fan for the removal of flue gases from the furnace? (A) Coke oven (B) Blast furnace stoves (C) Beehive coke oven (D) High pressure boiler

Last Answer : (D) High pressure boiler

Which of the following furnaces will have maximum thermal efficiency? (A) Soaking pits (B) Walking beam reheating furnace (C) Boiler furnace (D) Rotary kilns

Description : Which of the following furnaces will have maximum thermal efficiency? (A) Soaking pits (B) Walking beam reheating furnace (C) Boiler furnace (D) Rotary kilns

Last Answer : (C) Boiler furnace

Means for giving direction to the circulation of gases in furnaces are (A) Fans (B) Arrangement of heating stock in the furnaces (C) Location of outlet ports and heating & combustion devices (D) All (A), (B) and (C)

Description : Means for giving direction to the circulation of gases in furnaces are (A) Fans (B) Arrangement of heating stock in the furnaces (C) Location of outlet ports and heating & combustion devices (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Forced recirculation of furnace gases is practised (A) To increase heat transfer by convection (B) To ensure uniform temperature (C) In furnaces, operating below 750°C (D) All (A), (B) and (C)

Description : Forced recirculation of furnace gases is practised (A) To increase heat transfer by convection (B) To ensure uniform temperature (C) In furnaces, operating below 750°C (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

An example of indirectly heated furnace is the (A) Soaking pit (B) Muffle furnace (C) Reheating furnace (D) None of these

Description : An example of indirectly heated furnace is the (A) Soaking pit (B) Muffle furnace (C) Reheating furnace (D) None of these

Last Answer : (B) Muffle furnace

Neutral atmosphere is maintained in a/an __________ furnace. (A) Cold rolled steel coil annealing (B) Open hearth (C) Soaking pit (D) Walking beam reheating

Description : Neutral atmosphere is maintained in a/an __________ furnace. (A) Cold rolled steel coil annealing (B) Open hearth (C) Soaking pit (D) Walking beam reheating

Last Answer : (A) Cold rolled steel coil annealing

Which furnace employs preheating, heating and soaking zones? (A) Soaking pit (B) Reheating furnace (C) Open hearth furnace (D) Cupola

Description : Which furnace employs preheating, heating and soaking zones? (A) Soaking pit (B) Reheating furnace (C) Open hearth furnace (D) Cupola

Last Answer : (B) Reheating furnace

__________ is an indirectly heated furnace. (A) Open hearth furnace (B) Muffle furnace (C) Soaking pit (D) Reheating furnace

Description : __________ is an indirectly heated furnace. (A) Open hearth furnace (B) Muffle furnace (C) Soaking pit (D) Reheating furnace

Last Answer : (B) Muffle furnace

Reducing atmosphere is maintained in a (A) Calcination kiln (B) Blast furnace (C) Soaking pit (D) L.D. converter

Description : Reducing atmosphere is maintained in a (A) Calcination kiln (B) Blast furnace (C) Soaking pit (D) L.D. converter

Last Answer : (B) Blast furnace

An example of recuperative furnace is the (A) Soaking pit (B) Open hearth furnace (C) Coke ovens (D) None of these

Description : An example of recuperative furnace is the (A) Soaking pit (B) Open hearth furnace (C) Coke ovens (D) None of these

Last Answer : (A) Soaking pit

Combustion of furnace oil in a furnace (soaking pit) with preheated combustion air at 400°C results in saving of about __________ percentfurnace oil as compared to its combustion with atmospheric air, if the fluegas outlet temperature from the soaking pit is 1200°C.(A) 5(B) 60(C) 20(D) 40

Description : Combustion of furnace oil in a furnace (soaking pit) with preheated combustion air at 400°C results in saving of about __________ percentfurnace oil as compared to its combustion with atmospheric air, if the flue gas outlet temperature from the soaking pit is 1200°C. (A) 5 (B) 60 (C) 20 (D) 40

Last Answer : (C) 20

Which of the following is a periodic furnace? (A) Tunnel kiln (B) Rotary kiln (C) Soaking pit (D) Reheating furnace

Description : Which of the following is a periodic furnace? (A) Tunnel kiln (B) Rotary kiln (C) Soaking pit (D) Reheating furnace

Last Answer : (C) Soaking pit

An example of shaft furnace is the (A) L.D. converter (B) Glass melting tank (C) Blast furnace (D) Soaking pit

Description : An example of shaft furnace is the (A) L.D. converter (B) Glass melting tank (C) Blast furnace (D) Soaking pit

Last Answer : (C) Blast furnace

Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Description : Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Last Answer : (B) Takes 2-3 days for coking of coal but requires no external fuel for heating

Coking time in beehive coke oven is about (A) 12 hours (B) 2-3 days (C) One week (D) Two weeks

Description : Coking time in beehive coke oven is about (A) 12 hours (B) 2-3 days (C) One week (D) Two weeks

Last Answer : (B) 2-3 days

Which of the following is not a directly fired furnace? (A) By-product coke oven (B) Calcination kiln (C) Sintering furnace (D) Open hearth furnace

Description : Which of the following is not a directly fired furnace? (A) By-product coke oven (B) Calcination kiln (C) Sintering furnace (D) Open hearth furnace

Last Answer : (A) By-product coke oven

The heat recoverable from flue gases of furnaces depends on the (A) Thermal efficiency of furnace (B) Quantity of flue gases (C) Flue gas temperature drop through the furnace (D) All (A), (B) and (C)

Description : The heat recoverable from flue gases of furnaces depends on the (A) Thermal efficiency of furnace (B) Quantity of flue gases (C) Flue gas temperature drop through the furnace (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Naphthalene recovered from coke oven gas is used (A) As moisture proof coating on fibres(B) As moth balls (insecticides)(C) As a fuel in furnaces(D) For making electrodes

Description : Naphthalene recovered from coke oven gas is used (A) As moisture proof coating on fibres (B) As moth balls (insecticides) (C) As a fuel in furnaces (D) For making electrodes

Last Answer : (C) As a fuel in furnaces

LSHS is a type of furnace oil, which (A) Is more viscous than high viscosity furnace oil (HVFO) (B) Stands for low sulphur heavy stock (C) Is an ideal fuel for metallurgical furnaces due to its lower sulphur content (< 1%(D) All (A), (B) and (C))

Description : LSHS is a type of furnace oil, which (A) Is more viscous than high viscosity furnace oil (HVFO) (B) Stands for low sulphur heavy stock (C) Is an ideal fuel for metallurgical furnaces due to its lower sulphur content (< 1%) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Thickness of stock does not affect the fuel economy of furnaces, if thematerial to be heated is of(A) Low emissivity(B) High thermal conductivity(C) Both (A) and (B)(D) Neither (A) nor (B)

Description : Thickness of stock does not affect the fuel economy of furnaces, if thematerial to be heated is of (A) Low emissivity (B) High thermal conductivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Which one of the following RP technologies uses solid sheet stock as the starting material? a.Droplet deposition manufacturing b.Fused-deposition modeling c.Laminated-Object Manufacturing d.Selective Laser Sintering

Description : Which one of the following RP technologies uses solid sheet stock as the starting material? a.Droplet deposition manufacturing b.Fused-deposition modeling c.Laminated-Object Manufacturing d.Selective Laser Sintering

Last Answer : c.Laminated-Object Manufacturing

The silica is used for preparing (A) Silica bricks (B) Coke oven (C) Lining for glass furnaces (D) All of these

Description : The silica is used for preparing (A) Silica bricks (B) Coke oven (C) Lining for glass furnaces (D) All of these

Last Answer : Answer: Option D

When refunding someone's money through PayPal, is it possible for them to get their full amount back, or will there always be a transaction fee sucked out of the full amount?

Description : When refunding someone's money through PayPal, is it possible for them to get their full amount back, or will there always be a transaction fee sucked out of the full amount?

Last Answer : answer:If I remember correctly (and if they haven't changed their policies), I think the transaction fee is only taken from the seller. No fee is deducted from the buyer. That should include refunds. ... stuff. (Like having proof that you refunded them.) You want to keep all of that linked together.

In a furnace employing forced draught as compared to induced draught, (A) Air is sucked in, so air leaks are more and hence the furnace efficiency is reduced (B) The fan operates hot and hence blades are liable to corrosion and erosion (C) Positive pressure exists in the furnace (D) None of these

Description : In a furnace employing forced draught as compared to induced draught, (A) Air is sucked in, so air leaks are more and hence the furnace efficiency is reduced (B) The fan operates hot and hence blades are liable to corrosion and erosion (C) Positive pressure exists in the furnace (D) None of these

Last Answer : (C) Positive pressure exists in the furnace

Ingress of cold air in the furnaces through cracks, charging doors, openings etc(A) Reduces the flue gas temperature and makes the furnace atmosphereoxidising(B) Increases the load on the induced draft fan(C) Reduces the furnace draught(D) All (A), (B) and (C)

Description : Ingress of cold air in the furnaces through cracks, charging doors, openings etc (A) Reduces the flue gas temperature and makes the furnace atmosphere oxidising (B) Increases the load on the induced draft fan (C) Reduces the furnace draught (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Fuel economy in furnaces can be achieved by (A) Using oxygen enriched combustion air (B) Preheating the combustion air (C) Reducing the heat loss through furnace openings & doors (D) All (A), (B) and (C

Description : Fuel economy in furnaces can be achieved by (A) Using oxygen enriched combustion air (B) Preheating the combustion air (C) Reducing the heat loss through furnace openings & doors (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Coke oven gas is stripped of its H2S and mercaptans content by (A) Absorption in wash oil (B) Adsorption on bog iron bed (C) Bubbling it through dilute sulphuric acid (D) Adsorption on silica gel

Description : Coke oven gas is stripped of its H2S and mercaptans content by (A) Absorption in wash oil (B) Adsorption on bog iron bed (C) Bubbling it through dilute sulphuric acid (D) Adsorption on silica gel

Last Answer : (B) Adsorption on bog iron bed

Beehive coke ovens are made of __________ bricks.(A) Silica (B) Fireclay (C) Silicon carbide (D) Corundum

Description : Beehive coke ovens are made of __________ bricks. (A) Silica (B) Fireclay (C) Silicon carbide (D) Corundum

Last Answer : (A) Silica

By-products are __________ recovered in 'Beehive ovens'. (A) Fully (B) Partially (C) Not at all (D) Negligibly

Description : By-products are __________ recovered in 'Beehive ovens'. (A) Fully (B) Partially (C) Not at all (D) Negligibly

Last Answer : (C) Not at all

Which of the following coke has the least percentage of ash? (A) Petroleum coke (B) Beehive coke (C) Foundry coke (D) Metallurgical coke

Description : Which of the following coke has the least percentage of ash? (A) Petroleum coke (B) Beehive coke (C) Foundry coke (D) Metallurgical coke

Last Answer : (A) Petroleum coke

The process of heating the cold pressed metallic powder is called __________ in powder metallurgy. (A) Precipitation (B) Fusion (C) Sintering (D) Agglomeration

Description : The process of heating the cold pressed metallic powder is called __________ in powder metallurgy. (A) Precipitation (B) Fusion (C) Sintering (D) Agglomeration

Last Answer : (C) Sintering

Which one is not an induced draught furnace? (A) Blast furnace stove (B) Sintering furnace (C) High pressure boiler (D) None of these

Description : Which one is not an induced draught furnace? (A) Blast furnace stove (B) Sintering furnace (C) High pressure boiler (D) None of these

Last Answer : (A) Blast furnace stove

A catalyst loses its activity due to (A) Loss in surface area of the active component (B) Agglomeration of metal particles caused by thermal sintering of the solid surface (C) Covering of the catalytic active sites by a foreign substance (D) All (A), (B) and (C)

Description : A catalyst loses its activity due to (A) Loss in surface area of the active component (B) Agglomeration of metal particles caused by thermal sintering of the solid surface (C) Covering of the catalytic active sites by a foreign substance (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following processes is absent in glass manufacturing process? (A) Sintering (B) Annealing (C) Shaping or forming (D) Melting

Description : Which of the following processes is absent in glass manufacturing process? (A) Sintering (B) Annealing (C) Shaping or forming (D) Melting

Last Answer : (A) Sintering

Temperature during hydrogenation of oil should not be more than 200°C, otherwise it will result in (A) Pyrolysis of oil(B) Sintering of porous catalyst(C) Hydrogen embrittlement(D) All (A), (B) and (C)

Description : Temperature during hydrogenation of oil should not be more than 200°C, otherwise it will result in (A) Pyrolysis of oil (B) Sintering of porous catalyst (C) Hydrogen embrittlement (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Steel balls are manufactured by (A) Sintering (B) Casting (C) Cold heading (D) Spinning

Description : Steel balls are manufactured by (A) Sintering (B) Casting (C) Cold heading (D) Spinning

Last Answer : (C) Cold heading

What is the point of paying a woman to rate your dick? Are they actually going to be honest if it sucked?

Description : What is the point of paying a woman to rate your dick? Are they actually going to be honest if it sucked?

Last Answer : [deleted]

Have you ever sucked on a sapsicle?

Description : Have you ever sucked on a sapsicle?

Last Answer : Interesting I had never heard of this thanks for the info.

Looking for a book to get sucked into over the ********* period - any ideas?

Description : Looking for a book to get sucked into over the Christmas period - any ideas?

Last Answer : Cold Comfort Farm by Stella Gibbons

Are we inside the black hole being sucked out, or outside the black hole being sucked in?

Description : Are we inside the black hole being sucked out, or outside the black hole being sucked in?

Last Answer : How do we know this is all even real? who’s to say you’re not imaginary, or I’m not imaginary? I don’t think we’ll ever know

What has gone bad in your life lately,what aspects of life have really sucked for you as of late?

Description : What has gone bad in your life lately,what aspects of life have really sucked for you as of late?

Last Answer : I think I have Chronic bronchitis so that’s just swell. xD

Has anyone ever had or seen a cat who sucked its leg?

Description : Has anyone ever had or seen a cat who sucked its leg?

Last Answer : answer:Purring is also a stress reaction. Does she have some sort of imbedded foreign object?Have you noticed an abscess or an abrasion? Is there a bald patch over the area? If your answer to all of these is ... a vet, just to be on the safe side though. By the way, cute boy. Looks kinda like mine.

What can be sucked and eaten ?

Description : What can be sucked and eaten ?

Last Answer : which can be eaten by sucking: sucking.

Is ribosone tablets sucked and maximum number of tablets can be taken in one day ?

Description : Is ribosone tablets sucked and maximum number of tablets can be taken in one day ?

Last Answer : It is indicated in the treatment and prevention of riboflavin vitamin deficiency diseases. Which prevents mouth sores. You can suck it or swallow it with water twice a day or on the advice of a doctor. Follow the doctor's advice before taking these medicines.

In a furnace operation, which is not preheated? (A) Solid fuels (B) Hydrocarbon containing fuel gases (e.g. coke oven gas, refinery gas etc.) (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : In a furnace operation, which is not preheated? (A) Solid fuels (B) Hydrocarbon containing fuel gases (e.g. coke oven gas, refinery gas etc.) (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Which of the following fuel gases is heavier than air? (A) Blast furnace gas (B) Coke oven gas (C) Natural gas (D) Water gas

Description : Which of the following fuel gases is heavier than air? (A) Blast furnace gas (B) Coke oven gas (C) Natural gas (D) Water gas

Last Answer : (A) Blast furnace gas

For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3 ), while the C.V. is same on weight basis (i.e., kcal/kg)? (A) Propane and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F. gas and coke oven gas

Description : For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3 ), while the C.V. is same on weight basis (i.e., kcal/kg)? (A) Propane and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F. gas and coke oven gas

Last Answer : (A) Propane and acetylene